<pkg>-<pkg-version>.tar.gz is the default value, so there's no need to
explicitly specify it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
<pkg>-<pkg-version>.tar.gz is the default value, so there's no need to
explicitly specify it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Similar to the other compressors. Notice that we use the -l (legacy format)
for Linux kernel initrd compatibility.
Lz4 decompression is supported by the Linux kernel since 3.11.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 4932c8a7cc introduced the
core-dependencies target to make sure that the dependencies.sh script
runs before we attempt to compile any host tool, so that the absence of
a compiler is properly detected. However, this relied on the
left-to-right evaluation of dependencies. This will no longer be true
when we enable top-level parallel build.
Fix this by letting DEPENDENCIES_HOST_PREREQ depend on
core-dependencies.
Note that it is not possible to remove the
dependencies <- core-dependencies. Indeed, it is possible that
DEPENDENCIES_HOST_PREREQ is completely empty, and in that case we still
need to check core-dependencies.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
dependencies.sh uses HOSTCC_NOCCACHE directly, and this variable is
exported from the top-level Makefile, so there is no need to pass
HOSTCC to it. HOSTCC is not used at all in dependencies.sh.
Thus, we also no longer need to apply the HOSTCC override for
core-dependencies. The core-depencies rule doesn't use HOSTCC or
HOSTCXX.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
[Thomas: change to automatically set the version in the generated .pc file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This feature is not used by anyone in the core developpers and makes a
drastic simplification of the pkg-download infrastructure harder.
The future patch will move much of what's in the current pkg-download.mk
file into the dl-wrapper which is a shell script.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a patch to avoid failing on a configure error if UI example can't be
built if libgtk3 is available but not gst1-plugins-base (gstreamer-video
is only needed for UI example, not for rygel UI)
Fixes:
- http://autobuild.buildroot.net/results/6c659aadfc418c0a27a93284eb34d75e2b0dc169
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes the following security issues:
* AST-2017-014: Crash in PJSIP resource when missing a contact header A
select set of SIP messages create a dialog in Asterisk. Those SIP
messages must contain a contact header. For those messages, if the header
was not present and using the PJSIP channel driver, it would cause
Asterisk to crash. The severity of this vulnerability is somewhat
mitigated if authentication is enabled. If authentication is enabled a
user would have to first be authorized before reaching the crash point.
For more details, see the announcement:
https://www.asterisk.org/downloads/asterisk-news/asterisk-13185-1475-1515-and-1318-cert2-now-available-security
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes#10556
The --with-crypto handling in ntp only works with libopenssl, not with
libressl, where it ends up with compilation issues like:
ntp_control.c:(.text+0x64): undefined reference to `EVP_MD_CTX_new'
ntp_control.c:(.text+0x10c): undefined reference to `EVP_MD_CTX_free'
libntpd.a(ntp_crypto.o): In function `bighash':
ntp_crypto.c:(.text+0x2e8): undefined reference to `EVP_MD_CTX_new'
ntp_crypto.c:(.text+0x328): undefined reference to `EVP_MD_CTX_free'
libntpd.a(ntp_crypto.o): In function `crypto_verify':
ntp_crypto.c:(.text+0x6cc): undefined reference to `EVP_MD_CTX_new'
ntp_crypto.c:(.text+0x710): undefined reference to `EVP_MD_CTX_free'
ntp_crypto.c:(.text+0x72c): undefined reference to `EVP_MD_CTX_free'
So ensure we only pass --with-crypto when libopenssl is used.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of limiting it to the package under test, we run it globally.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There are three 256 color terminfo files that buildroot only installs
if ncurses is configured with wide character support, which also
enables ext-color. There is a fourth 256 color terminfo file that does
not depend on wchar suport and is always installed.
This changes that to always install all four 256 color terminfo files.
When ncurses has ext-colors enabled,it allows 256 fg and bg colors at
the same time. Without ext-colors, it is still possible to use the 256
color terminfo files and one can get a combination of fb and bg colors
that equals up to 256, e.g. 256 fg colors on one background or 16 fg
and 16 bg colors.
In short, the 256 color files work fine without wchar or ext-color
support and support more colors than the normal xterm, etc. terminfo
files. It's common today for the default terminal to use
xterm-256color and it's nice if thinks like vim and top work out of
the box.
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes the following security issues:
14.6.1:
* AST-2017-005 (applied to all released versions): The "strictrtp" option in
rtp.conf enables a feature of the RTP stack that learns the source address
of media for a session and drops any packets that do not originate from
the expected address. This option is enabled by default in Asterisk 11
and above. The "nat" and "rtp_symmetric" options for chan_sip and
chan_pjsip respectively enable symmetric RTP support in the RTP stack.
This uses the source address of incoming media as the target address of
any sent media. This option is not enabled by default but is commonly
enabled to handle devices behind NAT.
A change was made to the strict RTP support in the RTP stack to better
tolerate late media when a reinvite occurs. When combined with the
symmetric RTP support this introduced an avenue where media could be
hijacked. Instead of only learning a new address when expected the new
code allowed a new source address to be learned at all times.
If a flood of RTP traffic was received the strict RTPsupport would allow
the new address to provide media and with symmetric RTP enabled outgoing
traffic would be sent to this new address, allowing the media to be
hijacked. Provided the attacker continued to send traffic they would
continue to receive traffic as well.
* AST-2017-006 (applied to all released versions): The app_minivm module has
an “externnotify” program configuration option that is executed by the
MinivmNotify dialplan application. The application uses the caller-id
name and number as part of a built string passed to the OS shell for
interpretation and execution. Since the caller-id name and number can
come from an untrusted source, a crafted caller-id name or number allows
an arbitrary shell command injection.
* AST-2017-007 (applied only to 13.17.1 and 14.6.1): A carefully crafted URI
in a From, To or Contact header could cause Asterisk to crash
For more details, see the announcement:
https://www.asterisk.org/downloads/asterisk-news/asterisk-11252-13171-1461-116-cert17-1313-cert5-now-available-security
14.6.2:
* AST-2017-008: Insufficient RTCP packet validation could allow reading
stale buffer contents and when combined with the “nat” and “symmetric_rtp”
options allow redirecting where Asterisk sends the next RTCP report.
The RTP stream qualification to learn the source address of media always
accepted the first RTP packet as the new source and allowed what
AST-2017-005 was mitigating. The intent was to qualify a series of
packets before accepting the new source address.
For more details, see the announcement:
https://www.asterisk.org/downloads/asterisk-news/asterisk-11253-13172-1462-116-cert18-1313-cert6-now-available-security
Drop 0004-configure-in-cross-complation-assimne-eventfd-are-av.patch as this
is now handled differently upstream (by disabling eventfd for cross
compilation, see commit 2e927990b3d2 (eventfd: Disable during cross
compilation)). If eventfd support is needed then this should be submitted
upstream.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
>From the advisory (https://irssi.org/security/irssi_sa_2018_01.txt):
Multiple vulnerabilities have been located in Irssi.
(a) When the channel topic is set without specifying a sender, Irssi
may dereference NULL pointer. Found by Joseph Bisch. (CWE-476)
CVE-2018-5206 was assigned to this issue.
(b) When using incomplete escape codes, Irssi may access data beyond
the end of the string. (CWE-126) Found by Joseph Bisch.
CVE-2018-5205 was assigned to this issue.
(c) A calculation error in the completion code could cause a heap
buffer overflow when completing certain strings. (CWE-126) Found
by Joseph Bisch.
CVE-2018-5208 was assigned to this issue.
(d) When using an incomplete variable argument, Irssi may access data
beyond the end of the string. (CWE-126) Found by Joseph Bisch.
CVE-2018-5207 was assigned to this issue.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Verified experimentally by using exception_ptr with m68k_cf5208 and
looking at the value of ATOMIC_INT_LOCK_FREE. ATOMIC_INT_LOCK_FREE=1,
so the issue is present. Also verified that gcc 7.x fixed it also for
cf5208.
Signed-off-by: Jan Heylen <jan.heylen@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As BUILD_STATIC_LIBS is not a standard cmake variable (while
BUILD_SHARED_LIBS is) we shouldn't add it in pkg-cmake.mk, although
for some packages that would make sense. Therefore, add a note so we
don't forget about this abnormality.
See: https://cmake.org/cmake/help/v3.8/manual/cmake-variables.7.html#variables-that-change-behavior
Signed-off-by: Jan Heylen <jan.heylen@nokia.com>
[Thomas: rework the comment in the code.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The BUILD_SHARED_LIBS option is already handled by the cmake-package
infrastructure, so there is no need to pass it at the package level.
Signed-off-by: Jan Heylen <jan.heylen@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently in Orange Pi boards post-build script is used only to generate
U-Boot boot script and post-image script is used only to generate sdcard
image according to genimage configuration. However both those tasks can
now be handled by generic Buildroot tools:
- BR2_TARGET_UBOOT_BOOT_SCRIPT config options
- support/scripts/genimage.sh script
This patch drops custom scripts replacing them
by generic Buildroot tools.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In commit fa6c7d1659 ("libdrm: fix
libatomic_ops linking"), a patch was added to switch to
PKG_CHECK_MODULES() to detect libatomic_ops instead of
AC_CHECK_HEADER.
However, as explained in
https://autotools.io/pkgconfig/pkg_check_modules.html:
"In contrast with almost all of the original macros, though, the default
action-if-not-found will end the execution with an error for not having
found the dependency."
This makes the configure script bail out when libatomic_ops is not
available, which is not what we want in libdrm's configure
script. This commit adjusts the PKG_CHECK_MODULES() call to avoid
failing.
Fixes:
http://autobuild.buildroot.net/results/cea/cea777dc997f86c1122c8b818d264215a0e77e5a/
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch contains the following changes:
- Remove all three patches, they are included in upstream version
- Add locally calculated sha256 hash
- Remove <pkg>_STRIP_COMPONENTS = 2, there is no leading directory
- Remove <pkg>_AUTORECONF and <pkg>_GETTEXTIZE since all the patches are
being removed.
Signed-off-by: Yair Ben Avraham <yairba@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Autotools-based packages that do not need C++ but check for it, and use
libtool, will fail to configure on distros that lack /lib/cpp.
This is the case for example on Arch Linux, where expat fails to build
with:
configure: error: in `/home/dkc/src/buildroot/build/build/expat-2.2.4':
configure: error: C++ preprocessor "/lib/cpp" fails sanity check
This is because libtool uses AC_PROC_CXXCPP, which can not be avoided,
and does require a cpp that passes some "sanity" checks (does not choke
on valid input, but does choke on invalid input). So we can use neither
/bin/false nor /bin/true...
We instead need something that can digest some basic C++ preprocessor
input. We can't use the target preprocessor: that does not work, because
it obviously has no C++ cupport:
arm-linux-cpp.br_real: error: conftest.cpp: C++ compiler not
installed on this system
We can however consider that the host machine does have a C++ compiler,
so we use the host' cpp, which is gcc's compiler wrapper that ends up
calling the host's C++ preprocessor.
That would give us a valid C++ preprocessor when we don't have one, in
fact. But autotools will then correctly fail anyway, because there is
indeed no C++ compiler at all, as we can see in this excerpt of a
configure log from expat:
checking whether we are using the GNU C++ compiler... no
checking whether false accepts -g... no
checking dependency style of false... none
checking how to run the C++ preprocessor... cpp
checking whether the false linker (/home/ymorin/dev/buildroot/O/host/bin/arm-linux-ld) supports shared libraries... yes
libtool.m4: error: problem compiling CXX test program
checking for false option to produce PIC... -DPIC
checking if false PIC flag -DPIC works... no
checking if false static flag works... no
checking if false supports -c -o file.o... no
checking if false supports -c -o file.o... (cached) no
checking whether the false linker (/home/ymorin/dev/buildroot/O/host/bin/arm-linux-ld) supports shared libraries... yes
So, using the host's C++ preprocessor (by way of gcc's wrapper) leads to
a working situation, where the end result is as expected.
Reported-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Damien Riegel <damien.riegel@savoirfairelinux.com>
Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libdnet is an optional dependency, it is only needed if nfq or ipq
module are enabled.
So, if libdnet and libnetfilter_queue are available, enable nfq module
and add a dependency to both packages otherwise disable nfq module.
Moreover, always disable ipq module as libipq is deprecated, it isn't
enable in iptables. Even if it was enabled, libipq.h can't be included
as it makes a reference to linux/netfilter_ipv4/ip_queue.h which is not
available anymore
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
