Drop upstream patches and add a new build fix (submitted upstream).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commands like 'nvme list' require libudev but support for libudev is
decided at compile time, and in buildroot this is hard disabled.
Add a check for udev and if it is available build nvme with udev
support.
Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
[Thomas:
- add comment to explain the LIBUDEV variable value
- use += instead of = to assign <pkg>_MAKE_OPTS.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The defconfigs for the Raspberry Pi boards start a console on HDMI in
addition to the classic one on UART. Document this feature in the
readme.
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As stated by Samuel the opencv2 package lacks inter-module dependencies:
http://lists.busybox.net/pipermail/buildroot/2016-April/158902.html
This patch adds the necessary code for freeswitch's mod_cv to compile.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This becomes handy when building hybrid images that needs to be able
to boot in MBR and GPT mode.
Signed-off-by: Benoît Allard <benoit.allard@greenbone.net>
Tested-by: Matt Weber <matt@thewebers.ws>
Reviewed-by: Matt Weber <matt@thewebers.ws>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Linux kernel doesn't even support i386 anymore, there is no NPTL
support for i386 and uClibc-ng only supports NPTL on x86, so there is
essentially no usable thread implementation. Most likely glibc and
musl also don't support i386 either. So it's time to remove the
support for this architecture variant.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The ucd-snmp/lmsensorsMib module uses lm-sensors, so ensure netsnmp is built
after lm-sensors if enabled.
As the list of mib modules to built is configured using a string option in
Kconfig, we cannot easily select lm-sensors from the netsnmp package - But
we can at least ensure it gets built before hand if enabled.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds a new defconfig to build a X-based
graphical system for the Minnowboard MAX board.
* The 'openbox' windows manager is chosen because it's simple
and lightweigth.
* Basic X apps are enabled (such as xrandr, xterm), so we
can at least get a console and change video mode.
* ALSA default configuration is provided, so HDMI audio
works out-of-the-box.
* OpenGL is supported.
Tested on Minnoboard Turot (which is Minnowboard Max compatible).
[Peter: drop unneeded/specific toolchain config options]
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit enables support for:
* HDMI audio
* Support for user-provided EDID firmware
(useful to workaround broken monitors)
* Evdev interface
* System V IPC (required by ALSA)
The options make the system more useful.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Given Minnowboard and Minnowboard MAX boards are very similar,
it's desirable to unify the support for them.
This commit does the following:
1) Remove Minnowboard MAX's genimage.cfg, post-build.sh
and post-image.sh. These are identical to Minnowboard's.
2) Move Minnowboard MAX's linux config, and rename it.
It would be lovely to have a single kernel config file.
The kernel size penalty involved in adding support for
all the peripherals on both boards is small enough to
justify this.
However, the original Minnowboard has some GPIO buttons
that need to be registered by the kernel. This is not
upstreamed, and hence we need to use the yocto v3.8 kernel
to have this support.
3) Rename each grub config to grub-{board}.cfg.
4) Modify (the now unique) post-build script to use
a different grub config, according to the board.
5) Update both defconfigs, as per the above changes.
6) Finally, update the readme.txt.
[Peter: mention MAX in readme title]
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Let's rework the board and config files to use genimage
to generate the SD card image directly.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When there are no parameters, simply use $(var) instead of $(call var)
Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use a variable to factorize the calls to make, as we use the same set
of options multiple times.
Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In commit f4682cf933, a hash of the patches applied to gcc was created
to make sure that ccache can properly detect when the toolchain has
changed. The patches applied to gcc consist of the buildroot patches in
package/gcc, but also potentially patches in BR2_GLOBAL_PATCH_DIR.
However, the path to the patches in BR2_GLOBAL_PATCH_DIR was corrected
incorrectly, because it misses a /. So instead of:
$(BR2_GLOBAL_PATCH_DIR)/gcc-initial/*.patch
it would look for
$(BR2_GLOBAL_PATCH_DIR)gcc-initial/*.patch
In other words, if BR2_GLOBAL_PATCH_DIR doesn't end with /, the patches
in BR2_GLOBAL_PATCH_DIR are not taken into account in the ccache hash.
To fix, add the missing /
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: He Chunhui <hchunhui@mail.ustc.edu.cn>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Although this package has been removed from the official release
packages since Qt5.6.0, it is still available for users to build
it from source. This is useful for platforms without GPU since its
successor (QtWebEngine) requires OpenGL support.
The package now matches the community-based meta-qt5 Yocto layer,
using the exact same revision of the qtwebkit source from github:
https://github.com/meta-qt5/meta-qt5/commit/e434995a
Here is the project source tree:
https://github.com/qtproject/qtwebkit
All the patches have been pulled from Yocto as well.
Since we are now using the source from the git repository, we need
to create an empty .git/ folder to force the headers re-generation.
https://github.com/meta-qt5/meta-qt5/blob/jethro/recipes-qt/qt5/qt5.inc#L33
Note that GPLv3 license option has been added with this release.
Reviewed-by: Julien Corjon <corjon.j@ecagroup.com>
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
[Thomas: fix license to be LGPLv2.1+, not LGPLv2+.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If we're building a kernel, we can also build LTP's test modules.
Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add noMMU configuration running on dc233c MMUv3 core with identity
memory map.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
dc232b is MMUv2 core, dc233c is very similar MMUv3 core. MMUv3 is the
latest full MMU for xtensa, which allows running both MMU and noMMU
linux variants.
Update configuration overlay and linux config file.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Tested-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There's no benefit on it being an autodep since it makes it harder to
find, and pppd can be selected directly.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove patch, which was applied upstream.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The current Buildroot defconfigs for Raspberry Pi and Raspberry Pi 2
instantiate a console on tty1, which appears on HDMI. Add a console on
the serial port (ttyAMA0) to be more consistent with other defconfigs
and provide a better out-of-the-box experience to users used to have a
serial console from Buildroot defconfigs.
This requires three changes:
1. have two 'console=' entries in the kernel command line: tty1,
then ttyAMA0;
2. change BR2_TARGET_GENERIC_GETTY_PORT to "console", so it starts
a getty on the last console= passed to the kernel, ttyAMA0;
3. add a new getty on tty1 to the generated inittab.
Step 2 is actually obtained by removing BR2_TARGET_GENERIC_GETTY_PORT
entirely from the defconfigs, since "console" is the default value.
Step 3 requires a post-build script since the Buildroot makefiles can
configure only one console.
Note: instead of simply adding a new getty on ttyAMA0 (which would
work) this patch actually changes BR2_TARGET_GENERIC_GETTY_PORT to
instantiate a console on UART, then adds back tty1 via
post-build.sh. This is done only to avoid the "GENERIC_SERIAL" comment
where we instantiate an HDMI console, then instantiate a really-serial
console on another line.
The result is these two inittab lines:
console::respawn:/sbin/getty -L console 0 vt100 # GENERIC_SERIAL
tty1::respawn:/sbin/getty -L tty1 0 vt100 # HDMI console
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since version 20160414 SCTP support is optional. Introduce an automatic
optional dependency for this protocol.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Make graph-depends script opening the output file in text mode since
only ascii characters will be written.
This change fixes the following error occuring when the default host
python interpreter is python3:
make: Entering directory '/opt/buildroot'
Getting targets
Getting dependencies for ['toolchain-external', 'toolchain', 'busybox', ...]
Getting dependencies for ['host-python3', 'host-pkgconf', 'host-gettext', ...]
Getting dependencies for ['host-libxml2', 'host-swig', 'host-m4', ...]
Getting version for ['toolchain-external', 'toolchain', 'busybox', ...]
Traceback (most recent call last):
File "/opt/buildroot/support/scripts/graph-depends", line 425, in <module>
outfile.write("digraph G {\n")
TypeError: a bytes-like object is required, not 'str'
Makefile:807: recipe for target 'graph-depends' failed
make[1]: *** [graph-depends] Error 1
Makefile:84: recipe for target '_all' failed
make: *** [_all] Error 2
make: Leaving directory '/opt/buildroot'
While with python2, adding 'b' to the openning mode has no effect on
Linux (c.f. [2]), the above error is expected with python3 (c.f. [1]).
Therefore, just open the outfile in default (i.e. text) mode.
[1] https://docs.python.org/3/library/functions.html#open
[2] https://docs.python.org/2/library/functions.html#open
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package provides the Universal Adapter user-space utility that is
used to receive commands from the Manufacturing Tool using the Freescale
UTP Protocol.
It requires a Freescale/NXP kernels whose configuration contains the
CONFIG_FSL_UTP option.
The /fat file is provided as a bootargs to the g_mass_storage driver
from U-Boot, see:
http://git.freescale.com/git/cgit.cgi/imx/uboot-imx.git/tree/include/
configs/mx6sabre_common.h?h=imx_v2015.04_3.14.52_1.1.0_ga#n116
Init scripts are provided so that the tool starts automatically at
bootup.
Tested on Nitrogen6_MAX + MFGTools.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
[Thomas:
- test return value from start-stop⁻daemon in init script, and
reindent the init script
- fix dependency of the comment
- rewrap Config.in help text.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
