This toolchain doesn't support MIPS32r5 and MIPS64r5 and the toolchain
infrastructure fail to import the sysroot to staging.
Fixes: c4a62fa627
Fixes: http://autobuild.buildroot.org/results/701/701e8a5f713f7bdd1f32a4c549cdaac580e2522a/
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Since the commit [1], the utils/genrandconfig script improved the
configuration randomization used by autobuilders. Since then it can
generate a configuration that is not suitable for an external toolchain
such the "Codescape IMG GNU Linux Toolchain".
Indeed this toolchain can be selected for mips32r5 or mips64r5 while only
mips32r2 or mips64r2 are really supported. The toolchain issue will be
fixed in a followup change.
We want to catch such issue in check_unusable_toolchain function otherwise
it is detected late during the sysroot import into staging and trigger
a weird error message:
ln: failed to create symbolic link 'output/host/mips64el-buildroot-linux-gnu/sysroot//nvmedata/autobuild/instance-25/buildroot/libc.a': No such file or directory
ln: failed to create symbolic link 'output/host/mips64el-buildroot-linux-gnu/sysroot/usr//nvmedata/autobuild/instance-25/buildroot/libc.a': No such file or directory
This is similar test than for the main sysroot check but this time we have
to use the toolchain cflags to check the architecture sysroot.
If the architecture sysroot doesn't exist, the toolchain will reply with
"libc.a".
Either the toolchain is really broken or we used a wrong target
architecture variant. In the later case, the toolchain infrastructure will
print a meaningful error message.
Note: We also may get a similar issue using the toolchain-external-custom package
if a toolchain is used with a wrong target architecture variant.
Fixes:
http://autobuild.buildroot.org/results/701/701e8a5f713f7bdd1f32a4c549cdaac580e2522a/
[1] aeee90ec10
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
libjxl is the reference implementation of JPEG XL (encoder and decoder).
https://github.com/libjxl/libjxl
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit modifies the toolchain-wrapper to make sure that the
CCACHE_COMPILERCHECK and CCACHE_BASEDIR are only set if ccache support
is enabled. Indeed, when BR2_USE_CCACHE is not set (or to a value
different than 1), we don't call the compiler with ccache, so there is
no reason to set those ccache environment variables, and they could
potentially conflict with a separate usage of ccache, outside of
Buildroot, for example when using the Buildroot SDK.
In particular, the value of CCACHE_BASEDIR doesn't not make any sense
when the Buildroot toolchain is not used during the Buildroot build,
as it points to the output directory $(BASE_DIR).
We pay attention to also not show those variables as being set in the
BR2_DEBUG_WRAPPER dump.
To help a little bit with this, a ccache_enabled boolean is introduced
to indicate when ccache is being used.
There is still quite a bit of #ifdef-ery involved, but it's not easy
to find a simpler way to organize the code.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-By: Vincent Fazio <vfazio@xes-inc.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
copy_toolchain_lib_root was not handling the case of "readlink"
returning nothing, which will happen if the symlink it is trying to
resolve does not point to a valid file on the build host. This
shouldn't happen, but it can.
The end result of this situation would be an endless loop of error
messages that would only end if aborted manually.
[...]
cp: missing destination file operand after
'/local/users/mmayer/buildroot/output/arm64/target//'
Try 'cp --help' for more information.
readlink: missing operand
Try 'readlink --help' for more information.
basename: missing operand
Try 'basename --help' for more information.
dirname: missing operand
Try 'dirname --help' for more information.
^C
make[1]: *** [package/pkg-generic.mk:384:
Instead of looping endlessly without explanation, let's abort and
inform the user that something seems amiss with their setup.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit is the result of running
support/scripts/gen-bootlin-toolchains now that 2022.08 toolchains
have been made available.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit "9a8ec9195c toolchain/toolchain-buildroot: migrate to virtual
package infrastructure" made the packages toolchain and
toolchain-buildroot to use the virtual package infra even they being
generic packages.
This works because on package/pkg-virtual.mk when a package do not
define neither _PROVIDES_ or _HAS_ symbols, only _IS_VIRTUAL is set to
YES and _VERSION and _SOURCE are set to empty before relaying the call
to inner-generic-package.
Add a comment explaining why the virtual package infra is used in these
cases.
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When we introduced support for the paranoid check of unsafe libraries
and headers path with commit 4ac8f78d37 (Add option for paranoid
unsafe path checking) back in 2014, we made it optional, as we expected
that would break quite a few packages.
Now, almost 8 years later, we only have three packages that explicitly
reference the option (dillo, gnuradio, and libtalloc), either in a patch
or in their .mk.
The option has been enabled by default since 2016, with 61c8854cef
(toolchain: enable paranoid unsafe path check by default), and that has
not triggered many build failures in a while.
The minimal defconfig used by test-pkg has also had it enabled as of
b6c98b3549 (minimal.config: add BR2_COMPILER_PARANOID_UNSAFE_PATH=y)
in 2017.
It is time to make that globally unconditional now.
There is still a remnant, in our binutils patches. As our toolchain may
get used outside of Buildroot, people may got the expectation that path
poisoning is only a warning, so we keep the current behaviour.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Romain Naour <romain.naour@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since glibc 2.33 (upstream commit
7a55dd3fb6d2c307a002a16776be84310b9c8989), headers >= 5.4.0 are needed
to build glibc for RISC-V 32-bit. Indeed
sysdeps/unix/sysv/linux/riscv/configure.ac contains:
if test $libc_cv_riscv_int_abi = ilp32; then
arch_minimum_kernel=5.4.0
fi
In order to take into account this dependency, we add the appropriate
logic in package/glibc/Config.in and
toolchain/toolchain-buildroot/Config.in.
This change means that if headers < 5.4.0 are selected, then no C
library at all will be available for RISC-V 32-bit, as glibc is the
only C library supporting RISC-V 32-bit currently. However, thanks to
the recent addition of BR2_TOOLCHAIN_BUILDROOT_NONE, the
choice...endchoice for the C library selection will not be empty,
allowing the user to see the Config.in comment explaining why glibc
can't be selected.
Therefore, technically this commit does prevent from creating a
configuration with RISC-V 32-bit and headers < 5.4.0, but it will have
BR2_TOOLCHAIN_BUILDROOT_NONE=y, which is catched by
package/Makefile.in, which aborts the build early on pointing out that
the configuration is invalid.
Fixes:
http://autobuild.buildroot.net/results/5ca49b2732f68eccb5276e7112f7f496dcc514ee/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In the internal toolchain backend, we have a choice..endchoice block
to allow the user to select the C library, between glibc, uClibc and
musl.
However, there are situations were no C library at all is
supported. In this case, the choice does not appear, and does not
allow to see the Config.in comments that are within the
choice..endchoice block and that may explain why no C library is
available.
For example, on RISC-V 32-bit, the only C library supported is glibc,
and the minimum kernel header version required by glibc on this
architecture is 5.4.0. In a future commit, we are going to add this
dependency on glibc (to fix build issues on configurations that have
headers < 5.4.0). But since glibc is the only supported C library on
RISC-V 32-bit, it means that the choice..endchoice for the C library
contains no entry, preventing from seeing the Config.in comment.
To address this issue, this commit adds a "dummy"
BR2_TOOLCHAIN_BUILDROOT_NONE option that shows up in the
choice..endchoice only when no C library is available. Thanks to this,
the choice..endchoice is never empty, and the Config.in comments can
be seen.
If the user keeps BR2_TOOLCHAIN_BUILDROOT_NONE selected, then the
build will anyway abort early because package/Makefile.in has a check
to verify that a C library is selected, and aborts the build if not.
Some could say that the problem should be resolved by instead
preventing the selection of headers < 5.4.0 on RISC-V 32-bit, but that
is difficult to do as the user can choose a custom header version, or
simply specific that (s)he wants to use the headers of the kernel
being built. In those situations, it's difficult to prevent selecting
headers < 5.4.0.
Prevent random configurations from triggering a build failure in our
autobuilders, by excluding that symbol from accepted configuration.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: update genrandconfig]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Startig with glibc 2.34, the gconv modules description has been split in
two:
- a common definition in the old location, /usr/lib/gconv/gconv-modules
- specific definitions in a subdirectory, /usr/lib/gconv/gconv-modules.d/
This is done so as to simplify the handling of glibc gconv modules, and
eventually to segregate those outside of glibc, and so that third-parties
may also provide their own gconv converters and their definitions.
And starting with that same glibc version, most of the gconv modules
definitions are moved to an extra configuration file in that
sub-directory.
It is thus no longer possible to use special code pages, like cp850,
which are very useful to access FAT-formatted devices.
Add support for this new gconv layout, while keeping support for older
glibc versions. Note that the modules themselves are not moved or
renamed, just the definition files have changed.
Instead of passing the one old gonv modules definitions file on stdin,
we pass the base directory to that file, and move into the script the
responsibility to find all the gconv definition files.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
As reported to Linaro bug tracker [1] the Arm GNU Toolchain generated
since 2022.02 doesn't work on all x86_64 host.
It still not fixed with 11.3.Rel1 release (2022.08).
Fixes#15006
[1] https://bugs.linaro.org/show_bug.cgi?id=5825#c19
This reverts commit 34cf3a15c9.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As reported to Linaro bug tracker [1] the Arm GNU Toolchain generated
since 2022.02 doesn't work on all x86_64 host.
It still not fixed with 11.3.Rel1 release (2022.08).
Fixes#15006
[1] https://bugs.linaro.org/show_bug.cgi?id=5825#c19
This reverts commit f4a78565db.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As reported to Linaro bug tracker [1] the Arm GNU Toolchain generated
since 2022.02 doesn't work on all x86_64 host.
It still not fixed with 11.3.Rel1 release (2022.08).
Fixes#15006
[1] https://bugs.linaro.org/show_bug.cgi?id=5825#c19
This reverts commit 22d10e294c.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit [1] enabled glibc on or1k since it's now supported but it
requires a toolchain with linux-headers >= 5.4.
From [2]:
"Here we define the minumum linux kernel version at 5.4.0, as that is the
long term support version where 32-bit architectures start to support
64-bit time API's. The OpenRISC kernel had some bugs up until version 5.8
which caused issues with glibc fork/clone, they have been backported to
5.4 but not previous versions."
Fixes:
checking installed Linux kernel header files... 3.2.0 or later
checking for kernel header at least 5.4.0... too old!
configure: error: *** The available kernel headers are older than the requested
https://gitlab.com/buildroot.org/toolchains-builder/-/jobs/2875256686
[1] 68d0aede59
[2] https://sourceware.org/git/?p=glibc.git;a=commitdiff;h=0c3c62ca7d9ff3bdacdd13e636bc858101e3e288
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This is perhaps the most controversial change for Buildroot that can
be written in a two-liner.
Historically, we have used uClibc as our default C library, as
Buildroot was created initially as a test-bed for uClibc, and also
because uClibc made a lot of sense for embedded Linux systems, due to
its smaller size and fine-grained configurability.
Since then, the landscape of embedded Linux systems has changed. Even
though Buildroot happily supports really low-end devices, the vast
majority of Buildroot users are quite certainly running the resulting
system on a reasonably powerful platform, with significant amount of
RAM and storage. In this context, the benefits of uClibc are no longer
that much relevant, and glibc causes less "troubles". Therefore, this
patch proposes to use glibc as our default C library when using the
internal toolchain backend instead of uClibc.
Of course, we will keep the support for uClibc, which remains an
important C library choice, for space-constrained systems, or simply
for architectures that are not supported by glibc.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Yann E. MORIN <yann.morin.1998@free.fr>
Acked-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This makes the condition easier to read and it's easier to maintain the
gcc bug too because we don't have to take care about new gcc versions.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[yann.morin.1998@free.fr: fix comment while at it]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This makes the condition easier to read and it's easier to maintain the
gcc bug too because we don't have to take care about new gcc versions.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Back many years ago, we developed an Eclipse plugin that simplified
the usage of Buildroot toolchains. Enabling the BR2_ECLIPSE_REGISTER=y
was registering the Buildroot toolchain into a special file in your
HOME folder that the Eclipse plugin would recognize to allow to
directly use the Buildroot cross-compiler.
This Eclipse plugin has not been maintained for years. The last commit
in the repository dates back from September 2017. Since then Eclipse
has moved on, and the plugin is no longer compatible with current
versions of Eclipse.
Also, Eclipse is probably no longer that widely used in the embedded
Linux space, as other more modern IDEs have become more popular.
All in all, it's time to say good bye to this Eclipse integration.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Gcc bug 99410 reappeared while building with gcc 11.x and while
testing it also shows up with gcc 12.x, so let's enable this bug for
all gcc versions except gcc 8.x.
Fixes:
http://autobuild.buildroot.net/results/64e54ef5ba3a3dee391b788315615d57a1dd9fa2/
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
While introducing gcc bug 99410 I've named BR2_TOOLCHAIN_HAS_GCC_BUG_ to
99140 that is wrong. So let's fix this by changing bug option to
BR2_TOOLCHAIN_HAS_GCC_BUG_99410.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
It's time to finally switch over globally to the new spacing format
that we have agreed on for the hash file, with 2 spaces as a separator
between fields.
This commit was mechanically generated using:
find . -type f -name '*.hash' | xargs sed -i 's%^md5[ \t]*\([^ \t]*\)[ \t]*\(.*\)$%md5 \1 \2%'
find . -type f -name '*.hash' | xargs sed -i 's%^sha1[ \t]*\([^ \t]*\)[ \t]*\(.*\)$%sha1 \1 \2%'
find . -type f -name '*.hash' | xargs sed -i 's%^sha256[ \t]*\([^ \t]*\)[ \t]*\(.*\)$%sha256 \1 \2%'
find . -type f -name '*.hash' | xargs sed -i 's%^sha512[ \t]*\([^ \t]*\)[ \t]*\(.*\)$%sha512 \1 \2%'
This commit can easily be backported on the LTS branch by re-running
the same commands, if needed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Until now, when BR2_CCACHE=y, ccache support was built into the
toolchain wrapper, and used regardless of whether the toolchain is
using during the Buildroot build itself, or later as part of the SDK.
However, having ccache support forcefully enabled in the SDK can
really be surprising, and is certainly unexpected for a
cross-compilation toolchain. This can be particularly surprising as
the ccache cache directory may be hardcoded in the ccache binary to
point to a folder that does not make sense on the SDK user's machine.
So what this commit does is create a BR2_USE_CCACHE variable, which
when set to 1 tells the toolchain wrapper to use ccache. Not defining
the variable, or specifying any other value that 1 causes the
toolchain wrapper to not use ccache. The main Buildroot Makefile is
modified to export BR2_USE_CCACHE = 1 when ccache support is enabled,
so that ccache is used during the Buildroot build.
However, when someone will use the SDK outside of Buildroot, the
toolchain wrapper will not use ccache.
The BR2_USE_CCACHE variable is only conditionally enabled in the main
Makefile (via ?=) so that it can be overridden in the environment if
one wants to quickly test disabling ccache in a ccache-enabled
Buildroot configuration. This is the scenario that was considered in
commit 792f1278e3 ("toolchain-wrapper:
support change of BR2_CCACHE"), which added the BR_NO_CCACHE variable.
The BR_NO_CCACHE variable is no longer needed, and replaced by this
BR2_USE_CCACHE variable.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
[Thomas: almost entirely rework the implementation and commit log]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The MMU option is currently located in the "Toolchain" menu, but it
doesn't make sense as it's really architecture related. In addition,
the selection of MMU has an impact on the choice of binary format
available, which is visible in the architecture menu.
Therefore, this commit moves the MMU option into the architecture
menu.
However, if we simply move it in arch/Config.in, it means that we
would have the following order of options:
Target architecture
Target architecture variant
ABI
MMU
Binary format
But really, the MMU option should be right below the Target
architecture variant, and the available ABIs derived from that.
The variant and ABI are arch-specfic, and defined in the per-arch
Config.in fragments; a Kconfig option can have only one prompt defined,
even under conditions, and appears at the place in the menu where its
prompt was defined. So, there is no (easy) possibility to have a
generic option appear where we want it.
Since in fact only 2 architectures show a visible prompt for the MMU
option (RISC-V and Xtensa), we move this option in
arch/Config.in.riscv and arch/Config.in.xtensa.
Some walkthrough the commit:
- BR2_ARCH_HAS_MMU_MANDATORY and BR2_ARCH_HAS_MMU_OPTIONAL are
removed as they are no longer needed
- BR2_USE_MMU becomes a hidden boolean
- All the places where we used to select BR2_ARCH_HAS_MMU_MANDATORY
now select BR2_USE_MMU directly.
- Introduce BR2_RISCV_USE_MMU and BR2_XTENSA_USE_MMU.
- All defconfigs that used "# BR2_USE_MMU is not set" are switched to
using the new option.
All in all, this simplifies things quite a bit, and allows to have a
good option ordering in the Target architecture menu.
This commit might raise a concern in terms of backward compatibility
with existing configurations. The only configurations that will be
broken by this change are RISC-V noMMU (which was very recently
introduced) and Xtensa noMMU (which we can probably agree is not such
a widely popular configuration).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
[yann.morin.1998@free.fr:
- expand further why we need per-arch MMU options
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Currently, glibc depends on !BR2_STATIC_LIBS in all the toolchain
variants.
However, for some architectures, glibc is the only supported libc. In
commit 3b3105328e ("Config.in: only
allow BR2_STATIC_LIBS on supported libc/arch"), we implemented a fix
to avoid configurations were BR2_STATIC_LIBS=y with an architecture
already supported by glibc, because these configurations are
impossible. This commit 3b3105328e
prevents from selecting BR2_STATIC_LIBS=y when the C library used for
the internal toolchain backend is glibc.
However, it introduces a discrepency between how this topic is handled
for internal and external toolchains:
- For internal toolchains, we prevent BR2_STATIC_LIBS=y if glibc is
chosen.
- For external toolchains, we allow BR2_STATIC_LIBS=y in all cases,
and it's each glibc toolchain that has !BR2_STATIC_LIBS
This commit addresses this discrepency by preventing BR2_STATIC_LIBS=y
if glibc is chosen in all cases.
Thanks to this, we can remove the !BR2_STATIC_LIBS dependency on both
the glibc package, and all glibc external toolchains.
Fixes: https://bugs.busybox.net/show_bug.cgi?id=14256
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: update to master, fix the gen-bootlin-toolchains script, add
a comment in the static/shared choice to indicate that static is
supported only with uclibc or musl]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When changing permissions on all directories in the staging directory,
after copying sysroot, paths that contain spaces break the call to
chmod.
With -print0 for find and -0 for xargs white spaces are correctly
interpreted.
Signed-off-by: Daniel Lang <d.lang@abatec.at>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In commit fd839aeb7f ("package/glibc:
introduce and use BR2_PACKAGE_GLIBC_ARCH_SUPPORTS and
BR2_PACKAGE_GLIBC_SUPPORTS") we moved the Config.in logic about glibc
dependencies from toolchain/toolchain-buildroot/Config.in into
package/glibc/Config.in.
Unfortunately, it is not possible to move the Config.in comments that
tell the user, within the choice..endchoice for the C library why
glibc is not currently selectable, so we had to keep them in
toolchain/toolchain-buildroot/Config.in.
Turns out that the comments were out of sync with the dependencies,
and two comments were missing. This commit adds the missing ones, and
adds a comment in package/glibc/Config.in explaining that we need to
be careful about updating toolchain/toolchain-buildroot/Config.in as
well.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
There is no need to have configuration files direbtly set the
BR2_PACKAGE_HOST_ELF2FLT option. The need for the elf2flt utility is
automatically determined by gcc build in package/gcc/gcc.mk according to
the BR2_BINFMT_FLAT option.
Accordingly, we can remove the file package/elf2flt/Config.in.host to
get rid of the BR2_PACKAGE_HOST_ELF2FLT option. BR2_STRIP_strip
dependency on this option is replaced with a dependency on
BR2_BINFMT_ELF.
To stay consistent with the fact that elf2flt supports only the arm, sh,
sparc, xtensa and riscv-64 architectures, a dependency on these
architectures is added to the BR2_BINFMT_FLAT option in arch/Config.in.
Board configuration files setting the BR2_PACKAGE_HOST_ELF2FLT option
are also updated.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
float128 is available on PowerPC with VSX [1] but it requires
libquadmath support.
[1] https://gcc.gnu.org/onlinedocs/gcc-9.1.0/gcc/Floating-Types.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Cyril Bur <cyrilbur@gmail.com>
Cc: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As we're about to remove the nds32 architecture support from
Buildroot, drop the toolchain-external-andes-nds32 external toolchain
package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
