Fixes multiple security isssues, most of them of the server component
though.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
cpanminus is currently responsible for about half of the autobuilder
failures, due to the missing dependency on host-qemu. However, even
with the host-qemu proposed by Arnout, cpanminus will still not work
properly: it will try to execute on the build machine executables
built for the target. While qemu is here to emulate the instruction
set, there is still the unsolved problem of kernel headers version
mismatch between the target and the build environments.
So the whole approach that consists in using host-qemu for building
simply cannot work properly, and until it is solved, the package
should be marked as broken.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
kexec only supports the following architectures.
i?86
powerpc
powerpc64
arm*
s390x|s390
sh4|sh4a|sh3|sh
mips*
cris
crisv32
ia64
x86_64
alpha
The Buildroot kexec package is available when an unsupported target
architecture is selected, leading to autobuild failures like the following.
http://autobuild.buildroot.net/results/e706b08abb4fd1987fc4aa970d6be50fc92dc1fa/build-end.log
This patch makes the kexec package available only for the supported
architectures.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Remove an lcdproc patch which has been rejected upstream. It has been
decided by lcdproc developer Markus Dolze that the behaviour of the
client_add_key command when handling the minus key is "intentional to
some degree."
This patch also takes the opportunity to remove the version number from the
single remaining lcdproc patch.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The lcdproc version bump to 0.5.6 has resulted in autobuilder failures such as
the following.
http://autobuild.buildroot.org/results/9967bc20a6094e836c4c18ff2cd30edef143bb8e/build-end.log
The 0.5.6 release added a new glcd driver, which requires the freetype and zlib
libraries. This patch makes the lcdproc package depend on freetype and zlib.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Note that libnfc has also switched from Subversion to Git.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixing linking time error with certain toolchains. The issue caused by a missing explicit linking to
libpthread. The failed buildlog:
Linking CXX executable testgenerictypes_exec
/home/buildroot12git/output/host/usr/lib/gcc/arm-buildroot-linux-uclibcgnueabi/4.6.3/../../../../arm-buildroot-linux-uclibcgnueabi/bin/ld: /home/buildroot12git/output/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libQtCore.so: undefined reference to symbol 'pthread_cancel'
/home/buildroot12git/output/host/usr/lib/gcc/arm-buildroot-linux-uclibcgnueabi/4.6.3/../../../../arm-buildroot-linux-uclibcgnueabi/bin/ld: note: 'pthread_cancel' is defined in DSO /home/buildroot12git/output/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/lib/libpthread.so.0 so try adding it to the linker command line
/home/buildroot12git/output/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/lib/libpthread.so.0: could not read symbols: Invalid operation
collect2: ld returned 1 exit status
make[3]: *** [templates/tests/testgenerictypes_exec] Error 1
make[3]: Leaving directory `/home/buildroot12git/output/build/grantlee-0.2.0'
make[2]: *** [templates/tests/CMakeFiles/testgenerictypes_exec.dir/all] Error 2
make[2]: Leaving directory `/home/buildroot12git/output/build/grantlee-0.2.0'
make[1]: *** [all] Error 2
make[1]: Leaving directory `/home/buildroot12git/output/build/grantlee-0.2.0'
make: *** [/home/buildroot12git/output/build/grantlee-0.2.0/.stamp_built] Error
Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Xtensa is a configurable processor architecture, which allows to define
additional instructions and registers. The required variant specific
information for the toolchain is delivered in an 'overlay' file, which
needs to be 'untarred' to the corresponding directories after the
source is installed and patched.
This patch provides support for binutils, gcc, and gdb with a very
limited changes to the build scripts. These additions are only executed
for the Xtensa architecture and have no effect on other architectures.
[Thomas: rebased on top of the 'arch: improve definition of gcc mtune,
mcpu, etc.' patch, and changed 'Target ABI' to 'Target Architecture
Variant'].
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The Xtensa architecture had been removed because it required special
handling and depended on additional directories and files that became
obsolete over time. This change is more aligned to other architectures.
[Thomas: rebased on top of the "arch: improve definition of gcc mtune,
mcpu, etc." patch].
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: reformat Config.in to fit 80-col]
Signed-off-by: Wojciech M. Zabolotny <wzab01@gmail.com>
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since perl no longer requires host-qemu, autoconf and automake work
again on the architectures that are not supported by host-qemu.
This reverts commit c65d92e8e2.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes the following build failure:
extra/checksum.c:16:25: fatal error: netinet/ip6.h: No such file or directory
compilation terminated.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
uClibc doesn't provide NSS support, so we shouldn't try to include nss
related headers or call nss related functions.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libtirpc does not implement the reentrant function getrpcbynumber_r(),
so allow quota to use the non-reentrant version getrpcbynumber(). This
should not be a problem as quota tools are not multi-threaded.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libtirpc does not implement the reentrant function getrpcbynumber_r(),
so allow nfs-utils to use the non-reentrant version
getrpcbynumber(). This should not be a problem as nfs-utils tools are
not multi-threaded.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As we will need to add more patches to nfs-utils, we need a correct
ordering when applying patches. Therefore, reformat the patches to use
a git format and git naming.
The nfs-utils-dont-mix-flags.patch is no longer needed as it was
patching Makefile.in files that were being regenerated due to the
package having _AUTORECONF = YES. The Makefile.in are properly
regenerated thanks to the nfs-utils-0002-Patch-taken-from-Gentoo.patch
patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When uClibc has RPC support, it is not needed to define the 'struct
rpcent' structure.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libtirpc-0005-rpcent-mark-getrpcbyname-name-argument-as-const-char.patch
fixes build failures like
http://autobuild.buildroot.org/results/7a3a751fe02c639ca75c575ca7fe20a72372b8d6/build-end.log.
libtirpc-0006-rpcent-remove-prototypes-of-reentrant-variants.patch
ensures that functions not implemented by libtirpc are not described
in a header file. It also allows to remove those prototypes that were
not matching the functions available in glibc or uClibc, causing
mismatch in prototypes.
libtirpc-0007-doc-Makefile.am-fix-out-of-tree-installation.patch is a
minor fix.
The following patches (8 to 9) allow libtirpc to provide sufficient
things to be able to build rpcbind on top of it.
All these patches have been submitted upstream on the libtirpc-devel@
mailing list.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The patch numbers in [PATCH x/y] are quite useless within the context
of Buildroot, and generate noise when patches are re-ordered.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The bluez-utils package does not build for the avr32 architecture; this
results in autobuilder failures such as the following.
http://autobuild.buildroot.net/results/d737d1220d7566289eee802fd580a49d8c456c97/build-end.log
The underlying problem is with the <sys/epoll.h> header provided by the
antiquated avr32 toolchain; this header lacks definitions for
epoll_create1() and EPOLL_CLOEXEC.
This patch disables support for the bluez-utils package on the avr32
architecture.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
kexec does not support the avr32 architecture; this results in autobuilder
failures such as the following.
http://autobuild.buildroot.net/results/5f5e91c3eb622bce88402a9afc8a3e7bd5007136/build-end.log
This patch disables support for the kexec package on the avr32 architecture.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The perlcross project makes it possible to properly cross-compile
perl. It creates a host-miniperl that is configured for the target
and uses that to cross-compile the perl modules.
Unfortunately there are still a few hacks needed to make it work.
Proper fixes can be developed and upstreamed later.
Since there is no longer a dependency on qemu, it works on all
architectures again.
Also removed some config options:
- BR2_PACKAGE_PERL_CUSTOM_INSTALL just allows a selection of modules;
this can also be encoded by an empty BR2_PACKAGE_PERL_MODULES.
- BR2_PACKAGE_PERL_DB_FILE and BR2_PACKAGE_PERL_GDBM_FILE can be
derived automatically from the package configs.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
xlib_libX11 builds a makekeys executable for the host, but uses the
targets X11_CFLAGS. This leads to build failures like
http://autobuild.buildroot.net/results/411eb3aefea859a7e31986a44acd50b475f174cb/
This problem was introduced by the version bump, because then also
the AUTORECONF was removed so the existing fix didn't work anymore.
As a slightly cleaner solution, just remove X11_CFLAGS from the
Makefile. We know we don't need it, because the X11 stuff is in
$(HOST_DIR)/usr/include which is already in HOST_CFLAGS.
[Peter: reword comments]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Give the path to the realdelf binary for the target, similar to how we
do for the other tools.
[Peter: reworded]
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This release contains many improvements bug fixes, and major new features and
support for float point numbers and support for multi-telegram communication...
[Peter: also drop autoreconf]
Signed-off-by: Sagaert Johan <sagaert.johan@skynet.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Contrary to what was written in samba.mk, the sys-quotas option
apparently does not depend on RPC support in the toolchain: Samba
builds perfectly fine on an uClibc toolchain without RPC support with
sys-quotas enabled.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Now that we're using full perl (which needs qemu), only make auto{conf,make}
available on the supported archs.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Build error message is:
glib-2.12 required to compile QEMU
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Build error message is:
Error: zlib check failed
Make sure to have the zlib libs and headers installed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes
http://autobuild.buildroot.org/results/ccb7d6da503a81015275ff1e4ba9a564203932ec/build-end.log
Even though the build failure happens on host-qemu, adding
host-pkgconf to QEMU_DEPENDENCIES seems like the right thing to do
since that this dependency will also be needed for the target qemu
once it gets included.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Currently packages can be described in two ways: proprietary (tarball not
saved, license not described in further detail), and others (tarball
saved, license described).
Split the logic to allow the license to be always described whether or not
the source code can be redistributed.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fix Peter's reported build failure:
http://autobuild.buildroot.net/results/1dcf63799937f2216e3c712af8880ad431dbd47c/build-end.log
This is because the configure script uses absolute paths to detect dbi,
mysql and pgsql, so forcibly disable them.
Also add the optional sqlite dependency when it's selected.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Useful to produce extra warnings for packages that have special
licensing-related issues.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The problem has to do with const-correctness. This has been resolved
for various architectures, but not for the generic case.
Signed-off-by: Mischa Jonker <mischa.jonker@synopsys.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Cups uses /usr/lib64 if the HOST has it, no matter if it is cross compiling
for a 32bit arch, breaking the build for stuff looking in /usr/lib.
The fix of commit edd2716c didn't work, it would just force /usr/lib64 if
the target is 64 bit. Instead, force installation in /usr/lib regardless
of the host.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Graphics can be enabled for X11 as well.
Do not select DirectFB for graphics,
set DirectFB or X11 dependencies instead.
Signed-off-by: Valentine Barshak <gvaxon@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fix a build issue similar to the one encountered on xapp_listres at
http://autobuild.buildroot.org/results/06d0ef38165769df38047c1f64d4cfae835e9e54/.
Note that this new version requires a minor cross-compilation fix in
configure.ac, which has already been committed upstream but is not yet
part of a release tarball.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It is no longer being developed, the FTP is dead, and Debian has
removed it from the distribution.
Also it allows to not worry about adding RPC support through libtirpc
to this package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It is no longer being developed, the FTP is dead, and Debian has
removed it from the distribution.
Also it allows to not worry about adding RPC support through libtirpc
to this package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The BR2_INET_RPC has for a long time been a not very descriptive
configuration option name, and with the advent of non-RPC glibc
toolchains and the apparition of libtirpc, we really need to rename it
to something more sensible, BR2_TOOLCHAIN_HAS_NATIVE_RPC.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of making the Busybox configuration more complicated by trying
to adjust it depending on whether RPC is available or not (which gets
complicated when RPC support can be provided by libtirpc), simplify
things by letting the user enable FEATURE_NFS_MOUNT or not depending
on whether RPC support is available or not.
Our default configuration do not enable FEATURE_NFS_MOUNT, so users
will not face any build problems by default. Only if they explicitly
enable FEATURE_NFS_MOUNT will they have to make sure that the
toolchain has RPC support, or that libtirpc is enabled (support for
this added in a followup patch).
[Peter: remove from CONFIGURE_CMDS as well]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libhid uses timerfd, which is not yet available in the uClibc-0.9.31
that we have to rely on for avr32. Since this is pretty much a corner
case, just disable libhid for avr32.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When downloading from git, we clone the whole repository and then only
use the latest commit. That's a lot of redundant stuff. So instead,
make a shallow clone. Unfortunately that's only possible when
downloading a branch or tag, so fall back to the old method if git gives
an error.
This speeds up the cloning of a linux git from more than 2 hours to
20 minutes on a 200KB/s link).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
