Normally the kconfig stings would end up empty and cause a build
error. This patch provides test files to allow testing the creation
of uboot environment and script bin files from user provided txt files.
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
For consistancy and dependencies between uboot and uboot-tools,
this patch migrates the script creation over in a similar way as
the env image creation.
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Migrating the support for this feature to uboot-tools to gain the
ability to build env files when BR2_TARGET_UBOOT isn't selected.
When _ENVIMAGE_SOURCE is not set, we generate a default environment.
However, this default depends on the U-Boot configuration. Therefore,
this can only be done if uboot itself is built as well, and
host-uboot-tools needs to depend on uboot.
For the same reason, the commands for creating the environment have to
be adapted a little. Take this occasion to drastically simplify them.
Note: This patch creates a circular dependency with uboot until the
similar migration patch is merged for uboot scripts
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
uclibc-ng supports the RISC-V architecture since version 1.0.31, so
let's allow selecting this C library when RISC-V is used.
There was a previous attempt in commit
bd9810e176, which was reverted in
e7d631c0df, due to uClibc-ng not
implementing the __riscv_flush_icache() which is needed by
gcc. However this function has been implemented in upstream uClibc-ng
as of 1.0.35, so we can now safely re-enable uClibc-ng on RISC-V.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
For 9 years the recommended mount point for selinuxfs has been
/sys/fs/selinux, as stated in Linux kernel commit 7a627e3b9a2b:
"""
For selinuxfs, this mount point should be in /sys/fs/selinux/
"""
As other projects follow this convention, not doing so result in
potential issues. One of them is the refpolicy not correctly labelling
and supporting the mount point.
Fix this by using /sys/fs/selinux as of now in Buildroot.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Reviewed-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Qt 5.12 added a library for IPC, so let's have a package for it. The
dependency on qtdeclarative is optional.
Signed-off-by: Sven Fischer <sven@leiderfischer.de>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This partially reverts commit a3aac6d847,
just dropping the atomic dependency.
That dependency would introduce a "recursive dependency" chain in
Kconfig.
However, r100 is only available on i386 and x86-64, and they both have
sync4, which means libdrm's HAS_ATOMICS is always 'y' when r100 is
available.
So, like we did in 00c1a8c34f (package/mesa3d: propagate missing
libdrm-freedreno deps), we just add a fat comment that explains why the
dependency is not propagated.
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: James Hilliard <james.hilliard1@gmail.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
To allow easier installation of ebtables-legacy-save from the config
menu, select BR2_PACKAGE_BASH. All dependencies of bash are met
already by ebtables depending on BR2_USE_MMU.
Signed-off-by: Ryan Barnett <ryanbarnett3@gmail.com>
Tested-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With the version bump to 2.0.11, ebtables switch to autotools build
system. In addition, ebtables-{restore/save} moved to being installed
as ebtables-legacy-{restore/save}.
Changes to support this version bump include:
* Remove dependency on !BR2_STATIC_LIBS for ebtables-restore as the
switch to autotools supports compiling with static libraries.
* Update ebtables-save script patch to use /usr/sbin/ebtables-legacy
* Remove 0001-*-ethernetdb*.patch as it was merged with commit:
http://git.netfilter.org/ebtables/commit/?id=f8079671326e9fd079391d24911a9a8a77f1d6fd
* Remove 0002-*-musl-*.patch as support was added with commit:
http://git.netfilter.org/ebtables/commit/?id=9fff3d5f9da00255463d28b38d688c25025b7fb1
Tested with test-pkg with BR2_PACKAGE_EBTABLES=y:
br-arm-full [1/6]: OK
br-arm-cortex-a9-glibc [2/6]: OK
br-arm-cortex-m4-full [3/6]: SKIPPED
br-x86-64-musl [4/6]: OK
br-arm-full-static [5/6]: OK
sourcery-arm [6/6]: OK
Signed-off-by: Ryan Barnett <ryanbarnett3@gmail.com>
Tested-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Propagate libdrm dependencies.
Add r100 to menu name to differentiate from r200 dri driver.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The kernel may install compressed modules. At the end of the build, we
then run depmod, to generate modules.dep and a few assorted files, so
that loading modules works properly on the target (loading by alias,
loading dependencies...)
However, depmod needs support for compressed modules, or it would
generate empty modules.dep et al.
Uconditionally adding support for gz and xz, and the required deps,
was deemed too much of a burden [0], so we add options to enable
either or both compression.
[0] http://lists.busybox.net/pipermail/buildroot/2018-April/218410.html
Yegor Yefremov <yegorslists@googlemail.com>
Cc: Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Lucian Buga <lucianbuga@gmail.com>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Curently, host-kmod has no option to enable it, because only
the kernel depends on it, and this is unconditional (because
we can't know if modules will be enabled in the kernel config).
But we're soon to add options to enable various features of
kmod, so we'll need a place where to show those features.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Cc: Lucian Buga <lucianbuga@gmail.com>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cukinia is a test framework designed to help Linux-based embedded
systems developers run simple system-level validation tests on their
firmware.
It is designed to integrate well with embedded Linux systems
generation tools, and can be run manually (providing a quick
colourized summary to eye-catch regressions), or any of continuous
available integration framework, by generating Junit-XML or CSV test
reports.
Signed-off-by: Jérôme Oufella <jerome.oufella@savoirfairelinux.com>
Signed-off-by: Shyam Saini <shyam.saini@savoirfairelinux.com>
Tested-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
It's easier to locate given format when it's sorted.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, we handle three kinds of tests: basic, defconfig, and
runtime, and we treat them totally independently ones from the others.
Except for the basic tests that are ignored when defconfig or runtime
tests are explicitly requested.
The basic tests are also run systematically on all our reference
branches: master, next (when it exists), and the maintenance branches:
YYYY.MM.x.
Furthermore, we can see that the conditions to run each set of tests
are very similar, with only the explicit queries differing by name.
Rework the script so that the conditions are expressed only once, and
each set of tests is decided for each condition. This makes it easier
to decide what tests should run under what conditions.
Using GitLab-CI's schedules, with a variable expressing the actual test
to run, would seem the obvious choice to trigger the pipelines. However,
a schedule is configured for a specific branch, which means we would
need one schedule per branch we want to build per test cases we want to
run, *and* that we update those schedules when we add/remove branches
(e.g. when we open/close 'next', or a maintenance branch). This is not
very nice, as it requires some manual tweaking and twiddling on the web
UI.
Instead, we resort to using triggers, that will be triggered from a
cronjob on some server. Using a cronjiob allows us to more easily manage
the branches we want to test and test cases we want to run, to more
easily spread the load over the week, etc...
Note: triggering a pipeline can be done with a simple curl invocation:
$ curl -X POST \
-F "token=${YOUR_TOKEN}" \
-F "ref=${BRANCH_TO_TEST}" \
-F "variables[BR_SCHEDULE_JOBS]=${TEST_TO_RUN}" \
"https://gitlab.com/api/v4/projects/${YOUR_PROJECT_ID}/trigger/pipeline"
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add tests to ensure the packages SELinux functionalities (being able to
select an extra SELinux module in the refpolicy, and being able to
provide a custom SELinux module) are working as expected.
We use a BR2_EXTERNAL folder, provided in the tests, to use a custom
SELinux enabled package.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a test for BR2_PACKAGE_REFPOLICY_CUSTOM_GIT (which allows to select
a custom location for the SELinux refpolicy). The test uses the official
refpolicy as a test (we only want to test the functionality is working,
not that another refpolicy is correctly building; that is an user
problematic).
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a test for the BR2_REFPOLICY_EXTRA_MODULES_DIRS functionality (which
allows to provide custom SELinux modules).
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds a test for the BR2_REFPOLICY_EXTRA_MODULES
functionality (which allows to select extra modules within the SELinux
refpolicy using Kconfig).
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a test called 'SELinuxSystemdSquashfs' which will perform the same
tests as the Ext4 version, but using a Squashfs filesystem. Thanks to
this, we'll have a test on a real only filesystem.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This adds a test called 'SELinuxSystemdExt4'. This test will build an
SELinux enabled image with systemd, boot it, and perform a few runtime
tests to check SELinux related capabilities.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
REFPOLICY_EXTRA_MODULES_DIRS contains
$(PACKAGES_SELINUX_EXTRA_MODULES_DIRS) which is filled in by
package/pkg-generic.mk with the list of packages that have a selinux/
sub-directory. Due to how variable expansion works, if there is an
ifeq/ifneq test of REFPOLICY_EXTRA_MODULES_DIRS, it will only see the
value of REFPOLICY_EXTRA_MODULES_DIRS with the list of packages
*before* refpolicy in alphabetic ordering. This means that packages
after refpolicy in alphabetic ordering would not be taken into
account.
To fix this, we switch to an $(if ...) test, which allows the variable
to really be evaluated during the refpolicy build. This makes sures
the expansion is correct.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Pass HOST_LDFLAGS to avoid the following build failure due to missing
RPATH:
*** ERROR: package host-sentry-cli installs executables without proper RPATH:
*** /srv/storage/autobuild/run/instance-3/output-1/host/bin/sentry-cli
Fixes:
- http://autobuild.buildroot.org/results/d52638baefec961ff693aecf833af7adfc482fe4
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit fd5376a39d wrongly named the patch
as 0002-x.patch instead of 0001-x.patch
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The buildroot custom bareboxenv compile command misses the additional
include path 'scripts/include' to gain access to the local copy of the
kernel header files (which leads to compile error when using an older
toolchain).
This could be fixed by enhancing the custom bareboxenv compile command
(see [1]) or by using the barebox build system by simply enabling the
CONFIG_BAREBOXENV_TARGET option (available since April 2012, see [2])
instead (as suggested by Yann E. MORIN).
Fixes (with BR2_TARGET_BAREBOX_BAREBOXENV enabled):
build/barebox-2019.12.0/scripts/bareboxenv.c💯10: fatal error: linux/list.h: No such file or directory
[1] http://lists.busybox.net/pipermail/buildroot/2020-January/270942.html
[2] https://git.pengutronix.de/cgit/barebox/commit/?id=afb03d7a554a2911a3742e316f011319fcb416f1
Note: a user who would previously provide a barebox config file which
had CONFIG_BAREBOXENV_TARGET=y, but a Buildroot config file which did
not have BR2_TARGET_BAREBOX_BAREBOXENV=y, would have bareboxenv-target
built, but it would not be installed in the target. Now, and unset
BR2_TARGET_BAREBOX_BAREBOXENV will not even build it, but his is not a
regression: it was anyway previously not installed.
Reported-by: Frederick Gotham <cauldwell.thomas@gmail.com>
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[yann.morin.1998@free.fr:
- also explicitly disable it when not selected
- rewrap commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- Default value of MinTLSversion set to 1.2.
- mbed TLS updated to 2.23.0.
- Small bugfixes.
- Update indentation in hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
