Add support for the iMX6 based conga-QMX6 family of Qseven modules.
This patch is based on Linux 3.0.35 from Congatec's kernel reporitory
[Peter: slightly simplify post build script]
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add initial support for the Lego Mindstorms EV3 programmable brick.
The Lego Mindstorms EV3 brick comprises a Texas Instruments AM1808 SoC, with
an ARM 926EJ-S main processor running at 300 MHz.
https://en.wikipedia.org/wiki/Lego_Mindstorms_EV3
This configuration uses the Linux kernel of the ev3dev project.
https://github.com/mindboards/ev3sources
More info is available in the board/lego/ev3/readme.txt file, shamelessly
documented in the same way as the SoCkit folks did.
[Peter: lock kernel headers to match]
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump zedboard defconfig to version 2014.1. This makes it possible to use
uboot-spl instead of the xilinx specific fsbl. However, the result is kinda
hacky due to the licensing state of ps7_init.{c,h} needed for building uboot
spl. Directions for building a proper boot.bin using the new methodolgy is
included in the readme.txt.
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Make ti-gfx working on BeagleBone Black by adding an ugly necessary
patch to the kernel wich fix:
pvrsrvkm: Unknown symbol v7_dma_map_area
pvrsrvkm: Unknown symbol v7_dma_flush_range
Add drivers to the default kernel config used in beaglebone_defconfig
to enable the framebuffer.
Signed-off-by: Hadrien Boutteville <hadrien.boutteville@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The alsa utils packages require a kernel with IPC support to run. The
kernel config for the x86 and x86_64 qemu build includes sound support
using the hda driver but without the IPC support the alsa utils won't work.
This patch adds IPC support to the x86 and x86_64 kernel to allow alsa
utils to run and brings the kernel config inline with kernel configs for
other qemu boards.
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- fix networking in Qemu using a small patch
- disable DTS, because linux.bin does not include any DTB the
default Qemu included DTB is used and this is okay and works fine
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Config name has changed.
Signed-off-by: Charles Manning <cdhmanning@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit updates the defconfig of the foundation-v8 platform, which
can be tested under the AArch64 emulator provided by ARM. The main
change is that we switch to the mainline 3.13.6 kernel instead of a
Linaro-specific Git tree.
Another change is to update the download link for the emulator in the
instructions, in order to use the latest version of the emulator,
which was used for testing.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Tweak the config to deal with b155f5a5ab
fallout.
And bump to the latest kernel versions.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tweak the configs to deal with b155f5a5ab
fallout.
And bump to the latest kernel versions.
As of this commit the microblaze qemu targets seem broken, probably
because of commit 14e527eb66 or some qemu
limitation.
SPARC seems to have issues as well, the kernel seems to go down with an
unhandled exception with qemu 1.7.0
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit introduces initial support for the Arrow SoCkit
boards, featuring an Altera Cyclone V SoC:
http://www.altera.com/b/arrow-sockit.html
It is based on Roman Diouskine's work at
https://github.com/rndi/buildroot-alt.
The kernel and the u-boot used is the one developped by the
rocketboards.org community, as mainline support is not fully
available yet.
More info is available in the board/altera/sockit/readme.txt file.
[Thomas: remove a number of not really needed empty new lines in the
readme.txt file, update the defconfig for the new kernel headers
options.]
Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Git repo version is taken from meta-ti.
It's a 3.12.10 kernel with TI's own patches on top.
The defconfig has been kept rather close to our old defconfig.
The kernel has been boot-tested using an NFS-root.
Apart from the kernel change, the linux headers has also been
updated from 3.8.12 to 3.12.10.
[Peter: drop UEVENT_HELPER_PATH setting]
Signed-off-by: Anders Darander <anders@chargestorm.se>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add info about how to install a custom uboot on the zedboard.
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Thomas: update to recent Buildroot which had renamed several
Config.in options, lock down kernel headers version]
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Rename the defconfig to note that it's explicitly intended for the PA
kit revision since it'll likely brick a PB if the bootloader is flashed
without changing the U-Boot board name (and that it's untested in real
hardware).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Make the readme.txt for the raspberrypi board less misleading regarding the
kernel image file name.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
On some shell environments the EUID variable, which checks the
user id, is not defined. Use `id -u` instead.
This patch mutes the following error:
./board/cubietech/cubieboard/mkcubiecard.sh: 31: [: -ne: unexpected operator
Signed-off-by: Andi Shyti <andi@etezian.org>
Reviewed-by: Arvid Picciani <aep@exys.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Slim down the kernel config, switch to ext4 (with ext2/3 support),
enable N32 & O32 ABI compatibility for extra testing goodness and enable
keyboard & mouse support.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As pointed by Thomas P. kernel 3.12 oopses when loading/using the
emulated network.
Seems 3.12 broke versatile for qemu like in the past, only in a more
subtle way this time that escaped my automated qemu builds/tests.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We name all of our boards and defconfig files based on the boards
fullname, not a nickname or a shortname.
'rpi' is short for Raspberry Pi, so name all our Raspberry Pi ressource
with 'raspberrypi' instead of 'rpi'.
This should also help Buildroot-newcomers to recognise Raspberry Pi
related files (defconfig and board doc).
Signed-off-by: Mathieu Benoit <mathieu.benoit@savoirfairelinux.com>
[yann.morin.1998@free.fr: reverse the rename]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ryan Barnett <rjbarnet@rockwellcollins.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Mathieu Benoit <mathieu.benoit@savoirfairelinux.com>
[yann.morin.1998@free.fr: further improvements for readability and
completeness]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also tweak the kernel and buildroot config for basic WiFi support.
And fetch the ASoC patches for builtin audio.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 2c859079cd (configs/qemu: bump relevant config version) renamed
a number of linux configuration files, but forgot to update the defconfigs.
Tests shows that atleast arm versatile doesn't boot with 3.11, so rename
the linux configuration files back rather than adjusting the defconfigs.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
arm_nuri needs some DT fixups to switch to the 3.11.x series since it's
now default for that kernel defconfig.
[Peter: adjust comment in sparc defconfig to match]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Carlos Quijano <carlos@crqgestion.es>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Wandboard is a low cost iMX6 system consiting of an EDM standard
processor module and a small base board.
http://www.wandboard.org
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
While at it add the missing network interfaces to configurations that
support it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: lock kernel/headers version to 3.9.4, use devtmpfs, add comments]
Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: adjust for _FEX_FILE]
Signed-off-by: Carlo Caione <carlo.caione@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As the beaglebone support is mainlined, there's no support for the old
board setup files, and the only supported run-time configuration is through
the device tree.
We're also setting the kernel headers to follow the 3.8 series.
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This is a configuration that provides a basic setup for generating
bootable nandflash images:
- at91bootstrap
- barebox
- kernel
- rootfs
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
For more info, please read board/telit/evk-pro3/readme.txt
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The IRQ mapping failures have been fixed in 3.8.8 so update it to the
latest kernel series.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Buildroot toolchain, UBIFS rootfs, Linux kernel (board is mainlined since 3.8).
Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This is a default configuration for the RaspberryPi, tested and functional.
The kernel used is the one developped by the RaspberryPi foundation as
it's not fully supported currently in mainline kernel. The configuration
used for the kernel is the default bcmrpi.
For more info, please find board/raspberrypi/readme.txt
[Peter: minor README tweaks, rename to readme.txt]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
[yann.morin.1998@free.fr: use correct kernel headers, update kernel cset]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Buildroot toolchain, UBIFS rootfs, Linux kernel (board is mainlined
since 3.8).
Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Problematic configurations not bumped:
arm-versatilepb - IRQ failure for symbios scsi
sh4-r2d - Qemu still doesn't emulate advanced features from the UART
sparc-ss10 - Illegal instruction
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump to use kernel 3.7.1
Switch to hard float toolchain with NEON and VFP support.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Note that this configuration doesn't build entirely: the user must
manually run "make busybox-menuconfig" and disable the "Mount NFS
filesystems" option, because the toolchain does not have RPC support.
This issue will be fixed once the support for toolchain without RPC
will be integrated.
[Peter: fix readme typo]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Update to use the latest kernel 3.5.4.
And also update to the latest .config knobs, otherwise we were just
building a mips(32) target which failed miserably.
This config is still flaky, you get a login prompt but usually fail to
login, passing along an init=/bin/sh helps some but crashes are quite
usual.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add new powerpc-mpc8544ds sample qemu config.
Useful for SPE ABI testing.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This configuration provides a basic setup for using Buildroot
to create all of the images needed for a BeagleBone.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Also switch documentation to use qemu-system-i386
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The Avnet S6LX9 Microboard is a small USB-Stick sized module
containing a Spartan6 FPGA capable of running the Microblaze
softcore processor together with RAM and FLASH memory.
This board support pachage assumes that the Microblaze Bitfile
available from the Avnet website is programmed into the FPGA.
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add a new qemu_mips_malta sample configuration for big endian MIPS
testing.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Update configuration to use kernel version 3.2
Also update the readme to use buildroot basedir as a reference for
kernel and rootfs like the other samples do.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The APF9328 is an i.MXL+FPGA based SOM (System On Module). Here only minimal
support is added: booting Linux kernel (UART, Ethernet and NOR), Buildroot
toolchain and JFFS2 rootfs.
[Peter: Remove redundant BR2_TARGET_OPTIMIZATION]
Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We build the kernel with smc91x support, so also document how to enable
the emulation of it in qemu.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add a new qemu sample config for the SPARC architecture.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
sh4-r2d has a serial port, however it's the second SH UART that's
emulated by Qemu so we need to adjust the kernel configuration for it to
see the relevant UART and adjust the qemu command line for it too.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
mini2440 has been supported in the mainline kernel since early 2009,
so use that instead of a custom tarball.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Enable correct driver for qemu's rtl8139 emulation (8139cp), enable
CONFIG_PACKET so DHCP works and enable 8250 driver for serial console.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[ Thomas:
* renamed sh4_defconfig to qemu_sh4_r2d_defconfig, for consistency
with other Qemu platforms supported
* renamed board/qemu/sh4 to board/qemu/sh4-r2d
* minor fixes in the readme.txt
* remove useless statements in the minimal defconfig
* switch to a fixed kernel version instead of "same as headers"
]
Signed-off-by: Philippe Reynes <tremyfr@yahoo.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Paul Jones documented at
http://pauljones.id.au/blog/2010/07/using-buildroot-on-a-mini2440/ how
to use Buildroot to generate a system for the FriendlyARM Mini2440
platform. This patch integrates Paul's work into Buildroot.
Unfortunately, the kernel being 2.6.32, we can't easily use a minimal
defconfig here. The mini2440 support has been merged into more recent
kernels, but I don't have the hardware to test.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
