Patch 0003 will be extended to fix the blackfin build as well, therefore
it is renamed according to the fixed variable.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes (or atleast stops the build with a saner description):
http://autobuild.buildroot.net/results/1a9/1a9643f8633db038d4fe5ca4a32e4d52e70a3a1a/
We're using the same sources for host and target downloads, so it makes
sense to use the same <pkg>.hash file as well to ensure the host version
gets verified without us having to maintain a seperate host-<pkg>.hash file.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
mutt's ./configure looks for different paths for where to look for
incoming mails.
This is absolutely worng in the case of cross-compilation, because the
path it may find on the host may not exist on the target.
Not only that, but some host may not even have any of the paths
./configure looks for.
Fix that by specifying the mailpath, and set it to the value documented
in the FHS [0]
Since Buildroot only guarantees /tmp to be writable, make /var/mail a
symlink to /tmp .
[0] http://refspecs.linuxfoundation.org/FHS_2.3/fhs-2.3.html#VARMAILUSERMAILBOXFILES
Reported-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Without this, the python support doesn't do anything.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Freescale e5500 and e6500 cores are supported for versions >= 4.8
So filter out all of the older versions to avoid build failures.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add Freescale E5500 and E6500 core support.
These can go in 32 or 64-bit mode.
I'm not aware of these being able to boot in LE mode so filter that out
until we get some feedback on it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: "Matt Weber" <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Previously NetworkManager had to be enabled and started on the
first boot manually or by a script.
Add install define with the commands to setup the required
service files for automatic start.
Signed-off-by: Nathaniel Roach <nroach44@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upstream is no longer available, so get the tarball + important patches from
Fedora.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The functionality is included in python3 as the ipaddress module, so make it
python2 only.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Fix the help message for CodeSourcery MIPS toolchains
- Add a hash file
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
module could be removed of the core,
so check if the module is currently in the core,
but not if the module was once time included in the core.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Change to use the _defconfig targets of at91bootstrap3 build system
when a defconfig is used.
[Thomas: adjust to make a better use of at91bootstrap3 defconfig
mechanism.]
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Bump version to 1.5.2
- Add a hash file
[Thomas: fix typo in commit title.]
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Bump version to 0.9.0
- Add a hash file
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Bump version to 2.1.3
- Update the hash value
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libz160 is provided as binary. We need EABI toolchain with glibc to use
it.
[Thomas: adjust dependency comment according to Yann suggestions.]
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a patch to allow building wpa_supplicant with the musl C library.
Building wpa_supplicant with the musl C library fails since musl does not
define type names such as '__uint32_t'. To support building wpa_supplicant
with the musl C library use the integer types declared in the ISO C standard
header file <stdint.h>.
Patch is sent upstream:
http://lists.shmoo.com/pipermail/hostap/2014-December/031464.html
Signed-off-by: Jörg Krause <jkrause@posteo.de>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch remove a header inclusion that is not required an can create
build error with some toolchains.
The patch is pushed on the upstream for the next release.
http://dev.exiv2.org/issues/1007
Fixes:
http://autobuild.buildroot.net/results/09d/09d9b525eeee458247e10a7948070c00bbabb964/
Signed-off-by: Nicolas Serafini <nicolas.serafini@sensefly.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libunwind support in xorg-server is not only broken for MIPS64 n32 but
for all MIPS variants with 32-bit pointers. The reason is exactly the
same one. libunwind defines a uint64 variable to store the words. Then,
xorg-server casts that variable (64-bit) into a pointer (32-bit), and
the compilation fails:
backtrace.c:98:13: error: cast to pointer from integer of different size
[-Werror=int-to-pointer-cast]
Related:
https://bugs.freedesktop.org/show_bug.cgi?id=79939
Fixes:
http://autobuild.buildroot.net/results/87b/87be2c95957f9925c1258812e536df72689fc5da/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The argument are correctly used, but incorrectly documented.
Inverse the comments to match the actual usage.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Filesystems of the ext familly can carry a filesystem label.
Add an option for the user to specify such a label.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Károly Kasza <kaszak@gmail.com>
Tested-by: Karoly Kasza <kaszak@gmail.com>
Reviewed-by: Karoly Kasza <kaszak@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
And get rid of the old genext2fs.sh wrapper.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Karoly Kasza <kaszak@gmail.com>
Reviewed-by: Karoly Kasza <kaszak@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we are using a shell script called genext2fs, that
impersonates the real genext2fs. But that script does much more than
just call genextfs: it also calls tune2fs and e2fsck.
Because it impersonates genext2fs, we can not easily add new options,
and are constrained by the genext2fs options.
But it turns out that, of all the options supported by the real
genext2fs, we only really care for a subset, namely:
- number of blocks
- number of inodes
- percentage of blocks reeserved to root
- the root directory which to generate the image from
So, we introduce a new host package, mke2img, that is intended to
eventually replace genext2fs.sh.
This new script is highly modeled from the existing genext2fs.sh, but
was slightly refreshed, and a new, supposedly sane set of options has
been choosen for the features we need (see above), and some new options
were added, too, rather than relying on the arguments order or
environment variables:
-b <nb-blocks> number of blocks in the filesystem
-i <nb-inodes> number of inodes in the filesystem
-r <pc-reserved> percentage of reserved blocks
* -d <root-dir> directory containing the root of the filesystem
* -o <img-file> output image file
-G <ext-gen> extfs generation: 2, 3, or 4 (default: 2)
-R <ext-rev> ext2 revision: 0 or 1 (default 1)
-l <label> filesystem label
-u <uid> filesystem UUID; if not specified, a random one is used
* Mandatory options
Since the upstream e2fsprogs are expected to release a new mke2fs that
will be able to generate a filesystem image from a directory, we then
will be able to replace all the logic in mke2img, to use mke2fs instead
of the (relatively fragile) combination of the three tools we currently
use.
An entry is added for it in the "Host utilities" menu, so it can be
selected for use by post-{build,image} scripts. The ext2 filesystem
selection is changed to select that now.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Karoly Kasza <kaszak@gmail.com>
Reviewed-by: Karoly Kasza <kaszak@gmail.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: re-adjust dependencies, according to Yann's comment.]
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
