Switch to system/unbundled pcre since it's the default and recommended
by upstream now.
It's also good security practice since pcre patches won't get updated in
the bundled version inside glib so often.
As stated in glib's NEWS:
Overview of changes in GLib 2.47.5
* the system copy of PCRE is now used by default to implement GRegex.
Configure with --with-pcre=internal if a system PCRE version
is unavailable or undesired.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove source schema files from target
(/usr/share/glib-2.0/schemas/*.dtd and *.xml) at target finalization
time.
This is because other packages install schemas as well to avoid
duplicating file removal efforts all around.
Add a schema compiler run on target finalization as well - we previously
didn't do this since not many packages use it, however the upcoming
connman-gtk package does require a valid gschemas.compiled to work
properly.
We also do this at target finalization to avoid each package handling
this on their own.
Purge some extra binaries and files from the target, like the schema
compiler to save additional space since they're unused at run time.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes#8491
glib/valgrind.h contains inline asm not compatible with thumb1, so build it
in arm mode:
CC libglib_2_0_la-gstringchunk.lo
/tmp/ccSVEXME.s: Assembler messages:
/tmp/ccSVEXME.s:587: Error: shifts in CMP/MOV instructions are only supported
in unified syntax -- `mov r12,r12,ror#3'
/tmp/ccSVEXME.s:587: Error: shifts in CMP/MOV instructions are only supported
in unified syntax -- `mov r12,r12,ror#13'
/tmp/ccSVEXME.s:588: Error: shifts in CMP/MOV instructions are only supported
in unified syntax -- `mov r12,r12,ror#29'
/tmp/ccSVEXME.s:588: Error: shifts in CMP/MOV instructions are only supported
in unified syntax -- `mov r12,r12,ror#19'
/tmp/ccSVEXME.s:589: Error: lo register required -- `orr r10,r10,r10'
Makefile:2087: recipe for target 'libglib_2_0_la-gslice.lo' failed
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Sometimes if host-python is around it doesn't work too well with the
distro python (Gentoo, FC20 at least) leading to build failures.
This failure is very hard to trigger, it's normally easier to do so by
enabling top-level parallel builds.
Fixes:
http://autobuild.buildroot.net/results/0f8/0f881e322b7f9d244b8dd2440ba0afd3a8418027/
While at it update the configure options to avoid any host
libraries/tools from leaking in, new naming conventions and options.
And remove dead code dealing with the nothreaded variant.
Signed-off-by: Gustavo Zacarias <gustavozacarias@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit doesn't touch infra packages.
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump libglib2 to version 2.42.0 and remove obsolete patches.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A lot of packages ignored BR2_ENABLE_DEBUG. This patch simplifies the handling of
this option by adding the corresponding configure option to the global Makefile
for target packages.
For host packages --disable-debug is added to the global Makefile.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To be consistent with the recent change of FOO_MAKE_OPT into FOO_MAKE_OPTS,
make the same change for FOO_CONF_OPT.
Sed command used:
find * -type f | xargs sed -i 's#_CONF_OPT\>#&S#g'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To be consistent with the recent change of FOO_MAKE_OPT into FOO_MAKE_OPTS,
make the same change for FOO_INSTALL_STAGING_OPT.
Sed command used:
find * -type f | xargs sed -i 's#_INSTALL_STAGING_OPT\>#&S#g'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove patch because it is applied upstream in this version.
Signed-off-by: Hadrien Boutteville <hadrien.boutteville@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit removes all remaining references to uClibc 0.9.32.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since <PKG>_VARIABLE_MINOR variable in some packages is used only once,
so it is unusable. This patch removes it.
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libglib2 can fail to build for arm, with the following error.
gatomic.c:668:2: error: #error G_ATOMIC_LOCK_FREE defined, but incapable of lock-free atomics.
The following upstream commit fixes the problem.
commit 996edb0c46356d8a326f886b91a77a6af9a2de3e
Author: Antoine Jacoutot <antoine@mtier.org>
Date: Wed Aug 28 09:35:27 2013 +0200
fix atomic ops detection
AC_TRY_LINK should be used instead of AC_TRY_COMPILE because the code
will compile everywhere, either producing ``atomic'' code, or an
external reference to __sync_bool_compare_and_swap.
https://bugzilla.gnome.org/show_bug.cgi?id=706958
The upstream commit went into version 2.37.7, so this is the lowest version
that we can bump to, in order to fix the atomic operations problem. However,
2.37.x is a development version, so we bump to 2.38.2 instead.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch reinstates support for uClibc version 0.9.31, which was removed
from Buildroot in commit 8abb5b33c1
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In order to avoid the work of converting the toolchain-crosstool-ng
logic to the package infrastructure, we remove it from Buildroot,
since it has been deprecated since quite some time.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since 97c687000 (pkg-autotools.mk: default host AUTORECONF{,_OPT} to the
target values) we automatically enable autoreconf for host builds if it
is enabled for the target, so these can go.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This finally removes the BR2_HAVE_DEVFILES option, that was used to
install/keep development files on target. With the recent migration of
the internal backend to the package infrastructure, we had anyway lost
the ability to build gcc for the target, and install the uClibc
development files on the target.
[Peter: also remove support/scripts/copy.sh]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch bumps libglib2 to version 2.36.1. In addition this bumps glibmm
and glib-networking to 2.36.1.
Signed-off-by: Spenser Gilliland <spenser at gillilanding.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libglib2 requires msgfmt, which is now provided by host-gettext since
gettext will no longer be part of the mandatory dependencies.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
By default, glib builds its own internal copy of the pcre library, but
it also allows to use the one available from the system. Use this
possibility when pcre is already selected in the Buildroot
configuration.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add a patch that provides an additional --disable-tests option to the
configure script.
Disabling the build of tests has two benefits:
* Prevents the build of a lot of code that doesn't build on noMMU
platforms.
* Reduces the build time.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Finally get rid of all := used for variable definitions in packages,
as we suggest in our manual and during the review of new packages.
While I was at it, I also sometimes added a few missing new lines
between the header and the first variable definition.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If GLib is cross-compiled, the default printf settings that it selects are wrong
for glibc. This leads to issues with the g_print() functions, e.g. "Aborted"
errors returned by gst-inspect.
This patch fixes this issue by setting printf configuration options compatible
with glibc. These options should also be compatible with uClibc.
This solution has been suggested for LTIB by Rogerio Nunes:
https://community.freescale.com/thread/302734
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We really only need the host build of libglib2 for a few helper
programs that are used for the target build of libglib2. Therefore,
trying to use bells and whistles like DTrace, GCov and SystemTap is
totally useless.
And it is actually harmful, since it is causing build failures on the
gcc110 PowerPC-based autobuilder that apparently has some
DTrace-feature installed. This commit therefore fixes:
http://autobuild.buildroot.org/results/1c62d1ce10937bd21f5afcb73782b939d10c2038/build-end.log
Which has been polluting our autobuilder logs since several weeks now.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
From now on, packages only need to select the BR2_PACKAGE_GETTEXT
option and depend on the 'gettext' package to get the necessary i18n
libraries installed on the target.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: remove BR2_PACKAGE_LIBINTL]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
CC: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
qsort_r was only added in uClibc 0.9.33, so only enable it when we're sure
it's available. For external/ctng toolchains we cannot easily know, so
simply disable it there.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Update to latest stable release and add a dependency on libffi which
is needed by GObject.
[Peter: fixup build on uClibc]
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Thanks to the pkgparentdir and pkgname functions, we can rewrite the
AUTOTARGETS macro in a way that avoids the need for each package to
repeat its name and the directory in which it is present.
[Peter: pkgdir->pkgparentdir]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
