Since U-Boot 2022.04 a host dependency to util-linux (-luuid) is required if
the U-Boot board configuration has CONFIG_TOOLS_MKEFICAPSULE enabled. So
introduce a new BR U-Boot config option
BR2_TARGET_UBOOT_NEEDS_UTIL_LINUX to solve this problem.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
[yann.morin.1998@free.fr: fix check-package]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
More than five years ago, we added some patches to specific versions of
U-Boot. There is actually little point in maintaining patches for some
versions but not others. In addition, it's pretty unlikely that anyone
is using those specific old versions nowadays. Therefore, get rid of
those patches.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since U-Boot 2022.04 a host dependency to gnutls is required if the
U-Boot board configuration has CONFIG_TOOLS_MKEFICAPSULE enabled. So
introduce a new BR U-Boot config option BR2_TARGET_UBOOT_NEEDS_GNUTLS
to solve this problem.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some older versions of U-Boot, or custom versions (like forks for some
boards), fail to build with host-gcc 10+, because of redefined symbols:
HOSTLD scripts/dtc/dtc
/usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x10): multiple definition
of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
collect2: error: ld returned 1 exit status
make[4]: *** [scripts/Makefile.host:106: scripts/dtc/dtc] E
Since this has been fixed in recent-ish versions, we can't use an
unconditionaly patch, so we must have a conditional patch. However, a
patch may not always apply to arbitrary U-Boot versions or forks.
Upstream just dropped that line altogether:
018921ee79
So, we use a little sed-grep combo to do the exact same change.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
host-python3-setuptools was removed, we should instead use plain
host-python-setuptools.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The variable 'KERNEL_ARCH' is actually a normalized version of
'ARCH'/'BR2_ARCH'. For example, 'arcle' and 'arceb' both become 'arc', just
as all powerpc variants become 'powerpc'.
It is presumably called 'KERNEL_ARCH' because the Linux kernel is typically
the first place where support for a new architecture is added, and thus is
the entity that defines the normalized name.
However, the term 'KERNEL_ARCH' can also be interpreted as 'the architecture
used by the kernel', which need not be exactly the same as 'the normalized
name for a certain arch'. In particular, for cases where a 64-bit
architecture is running a 64-bit kernel but 32-bit userspace. Examples
include:
* aarch64 architecture, with aarch64 kernel and 32-bit (ARM) userspace
* x86_64 architecture, with x86_64 kernel and 32-bit (i386) userspace
In such cases, the 'architecture used by the kernel' needs to refer to the
64-bit name (aarch64, x86_64), whereas all userspace applications need to
refer the, potentially normalized, 32-bit name.
This means that there need to be two different variables:
KERNEL_ARCH: the architecture used by the kernel
NORMALIZED_ARCH: the normalized name for the current userspace architecture
At this moment, both will actually have the same content. But a subsequent
patch will add basic support for situations described above, in which
KERNEL_ARCH may become overwritten to the 64-bit architecture, while
NORMALIZED_ARCH needs to remain the same (32-bit) case.
This commit replaces use of KERNEL_ARCH where actually the userspace arch is
needed. Places that use KERNEL_ARCH in combination with building of kernel
modules are not touched.
There may be cases where a package builds both a kernel module as userspace,
in which case it may need to know about both KERNEL_ARCH and
NORMALIZED_ARCH, for the case where they differ. But this is to be fixed on
a per-need basis.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Arnout: Also rename BR2_KERNEL_ARCH to BR2_NORMALIZED_ARCH]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since commit 6dd5a33c48 (zynq_zed: bump U-Boot to xilinx-v2016.2), we
have no in-tree users of zynq-boot-bin.py, as U-Boot has since v2016.01
been able to natively generate Xilinx images.
zynq-boot-bin.py is python2-only and there is zero chance that upstream
will move it to python3. We could carry a python3-compatible copy, but
that tool is now virtually unused.
6 years have passed now; let it rest in peace at last.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: James Hilliard <james.hilliard1@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Some U-Boot platforms (e.g. rockchip) can bundle OPTEE's tee.elf
into the U-Boot image. This patch brings the necessary changes to
enable this feature.
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The mainline U-Boot can create an i.MX specific firmware image (e.g. flash.bin).
For this the i.MX firmware files must be in the toplevel directory.
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Starting with uboot 2021.10, with upstream commit 473fc279c89 (kconfig /
kbuild: Re-sync with Linux 4.20), the kconfig in uboot now needs the
compiler to detect its features.
Like was done for linux in 3fc990a798 (linux: kconfig needs the
toolchain) and barebox in 1c1a629d81 (boot/barebox: kconfig needs the
toolchain), add the toolchain to the kconfig dependencies of uboot.
Reported-by: Davian on IRC
Reported-by: Xogium on IRC
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Don't override UBOOT_DEPENDENCIES in a conditional
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The mainline U-Boot can create an i.MX specific firmware image (e.g. flash.bin).
For this the i.MX firmware files (DDR, HDMI) must be in the toplevel directory.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
[yann.morin.1998@free.fr: simplify hook]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
If the ATF binary is used by U-Boot, the file is expected to be in the
toplevel directory.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
As Thomas put it:
The <pkg>_HELP_CMDS variable allows packages using the
kconfig-package infrastructure to display their specific
targets related to the handling of their configuration.
However, it was not consistently used and handled by the
different packages.
So, this commit switches all the kconfig-based package to use the
generic help helper.
As a consequence:
- all kconfig packages now advetise their kconfig-related actions,
where some were previously missing: at91bootstrap3, linux-backports,
swupdate, xvisor;
- busybox advertises it does not support defconfig files;
- the 'foo-savedfconfig' action is no longer advertised: it is to be
considered an internal implementation detail.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
If U-Boot CONFIG_OF_SEPARATE is defined [1], then the device tree will
be built and placed in a u-boot.dtb file alongside u-boot.bin.
When BR2_TARGET_UBOOT_FORMAT_DTB is enabled, buildroot will copy
u-boot.dtb to $(BINARIES_DIR).
This is useful for RISC-V platforms that want to build OpenSBI with an
external DTB by using FW_FDT_PATH [2].
[1] https://github.com/u-boot/u-boot/blob/master/doc/README.fdt-control
[2] https://github.com/riscv/opensbi/blob/master/docs/firmware/fw.md
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Drew Fustini <drew@beagleboard.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 2eaa6d0f36 (boot/uboot: fix uboot building host tools on x86
architecture) added use of $(PKG_CONFIG_HOST_BINARY), but forgot to add
the corresponding build-ordr dependency.
Add this missing depenency now.
Additionally, the associated test had an explicit host pkgconf enbled in
its configuration. This is superfluous now that uboot properly depends
on host-pkgconf, so drop that from the test.
Note: it hapenned to work, because host-pkgconf, when explicitly enabled
in the configuration, and without per-package directories, would build
before uboot and thus be available. This would fail with PPD, though,
and thus would break for TLPB.
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The make all command run the tools/makefile on the process.
This makefile use "pkg-config" command to support static link.
The issue is the use of pkg-config configured for crosscompiling
to build binaries tools for host architecture.
To fix it, I add pkg-config environment variable to configure it for host.
Add a test to avoid future regress on the build of U-boot.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
[yann.morin.1998@free.fr:
- fix mixed space-TAB indentation
- fix check-package
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
If PER_PACKAGE_DIRECTORIES=Y and using host-make package (because
BR2_FORCE_HOST_BUILD=Y or local make is too old) .stamp_dotconfig
target needs per-package/uboot/host/bin/host-make that doesn't
exist yet.
Add host-make into UBOOT_KCONFIG_DEPENDENCIES.
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
since 2021.01, tools/binman is broken.
tools/binman/control.py imports pkg_resources
the module pkg_resources is supplied by setuptools,
so this new dependency is required.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some RISC-V platforms (such as SiFive HiFive Unleashed) encapsulate
the OpenSBI firmware image inside U-Boot.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds CPE ID information for a significant number of
packages.
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When using a custom git or mercurial repository for u-boot the error message
indicating a version had not been provided incorrectly stated that the URL was
missing. Update the error message to indicate that it's the version that's
missing.
Signed-off-by: Garret Kelly <garret.kelly@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add `.stm32` binary format that U-Boot generates for the trusted
configuration of STM32MP platforms.
Signed-off-by: Shlomi Vaknin <shlomi.39sd@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
For consistancy and dependencies between uboot and uboot-tools,
this patch migrates the script creation over in a similar way as
the env image creation.
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Migrating the support for this feature to uboot-tools to gain the
ability to build env files when BR2_TARGET_UBOOT isn't selected.
When _ENVIMAGE_SOURCE is not set, we generate a default environment.
However, this default depends on the U-Boot configuration. Therefore,
this can only be done if uboot itself is built as well, and
host-uboot-tools needs to depend on uboot.
For the same reason, the commands for creating the environment have to
be adapted a little. Take this occasion to drastically simplify them.
Note: This patch creates a circular dependency with uboot until the
similar migration patch is merged for uboot scripts
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
It's easier to locate given format when it's sorted.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
U-Boot must use $(BR2_MAKE) as it uses a Make feature from v4.0. We
already use $(BR2_MAKE) in the BUILD_CMDS, but the kconfig commands
still uses $(MAKE). Without this fix, building U-Boot with kconfig will
fail with the following cryptic error.
> Makefile:37: *** missing separator. Stop.
Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Before now, U-Boot SPL could only load the Platform Management Unit
(PMU) by patching the board-specific pm_cfg_obj.c file into the generic
PMU firmware, but that then requires generating a new PMU firmware for
every board configuration. To fix that, Luca Ceresoli added support to
U-Boot to load the pm_cfg_obj[1].
Like the PMU firmware, we need a way to pass the PMU cfg to U-Boot
during build. U-Boot only accepts the binary format of the cfg, so we
must convert the source file with the tool provided with U-Boot.
[1] https://lucaceresoli.net/zynqmp-uboot-spl-pmufw-cfg-load/
Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The HTTPS URL seems to be more reliable and quicker for download than
FTP. FTP may also be a blocked protocol on some sites and in CI/CD
setups.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
U-Boot versions newer than 2020.01 use Python 3.x instead of Python
2.x in various scripts.
We already had the BR2_TARGET_UBOOT_NEEDS_PYLIBFDT and
BR2_TARGET_UBOOT_NEEDS_PYELFTOOLS options, but depending on the U-Boot
version, we now need to indicate if Python 2.x or Python 3.x should be
used.
In addition, it turns out that some U-Boot configurations need a
Python interpreter, without needing pylibfdt or pyelftools. Some of
our defconfigs were abusing the BR2_TARGET_UBOOT_NEEDS_PYLIBFDT option
to make sure a Python interpreter was built.
To solve this issue, we introduce a choice, that let the users specify
what, if any, host python version is needed. The default is 'no', to
preserve the previous behaviour, unless any of the pylibfdt or the
pyelftools options is enabled, in which case we hide the 'no' option,
and use python 2 by default. This dfault is guaranteed by the order of
options in the choice.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- explicitly make the choice a bool
- make BR2_TARGET_UBOOT_NEEDS_PYTHON a blind option
- introduce the 'no' option in the choice
- reword the commit log accordingly
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
We can only know the details of the license files for known versions. For
custom, older or newer versions, the license files may change, or may be
moved around.
So, do for U-Boot as was done for ATF, linux, and linux-headers, and only
define the list of license files for the latest version.
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Starting with 2020.01, uboot started using the 'undefine' make
directive, which was only introduced with make 4.0.
In the general case, we do not have a way to know if the uboot
selected by the user is older or later than 2020.01, so we have
no way to know before hand if make >= 4.0 is needed or not. As
such, we have no other option than to always require it.
So, use the existing $(BR2_MAKE_HOST_DEPENDENCY) and $(BR2_MAKE),
both of each will ensure that we do use a make that is at least 4.0.
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The original UBOOT_FIXUP_LIBFDT_INCLUDE hook only works for u-boot versions
starting from v2017.11.
As older u-boot versions are still in common use today, e.g. in the
ci20_defconfig, extend the hook to cover a wider range of u-boot versions.
The main code change was proposed by Arnout Vandecappelle in [1].
Testing and comment changes were done by Thomas De Schampheleire.
Additional (build) testing done by Yann.
[1] http://lists.busybox.net/pipermail/buildroot/2019-May/251231.html
This was tested with the following defconfigs, that each excercise one
case:
----.-- No defconfig identified
2010.06 'lib/libfdt/', used to be simply 'libfdt' before upstream commit 0de71d507157...
2013.10 ci20_defconfig
2014.04 'srctree' used to be called 'SRCTREE' before upstream commit 01286329b27b27ea...
2017.05 olimex_a13_olinuxino_defconfig
2017.11 scripts/dtc/libfdt only exists since upstream commit c0e032e0090d6541549b19cc...
2018.01 mx6udoo_defconfig
2018.03 core change is equivalent to upstream commit e0d20dc1521e74b82dbd69be53a04884...
2019.10 nanopi_neo_defconfig
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
[yann.morin.1998@free.fr: add the build-test results]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
