Ulf Samuelsson
c73c1193f3
Remove jp BSP which only provide support for linux-2.4
2009-01-29 17:22:49 +00:00
Ulf Samuelsson
7785182e46
Remove Hitachi BSP, does not do ANYTHING except providing a differernt uClibc configuration for an obsolete version
2009-01-29 17:22:10 +00:00
Ulf Samuelsson
2f1eb9e4b8
Remove unneeded ARM architecure patch, just a clone of SAM9260 support
2009-01-29 17:21:16 +00:00
Peter Korsgaard
83e903468c
target/device: remove obsolete Sharp/LNode80 platform
...
As discussed on the list and requested on irc:
< prpplague> Jacmet: hey, just wanted to drop a note to confirm that the
LNode80 can be removed, we never went into full scale
production of it, only 20 were ever made
2009-01-29 17:05:12 +00:00
Ulf Samuelsson
a77bf1ecde
Update atstk100x BSP
2009-01-29 09:33:25 +00:00
Ulf Samuelsson
b47232e869
Add AVR32 support for linux-2.6.28.2
2009-01-29 09:32:45 +00:00
Ulf Samuelsson
6653646d66
Update at91rm9200df BSP
2009-01-27 06:05:15 +00:00
Ulf Samuelsson
0dbf9dd7ab
Create a common BR2_COPYTO to prepare to replace
...
all the different COPYTOs spread out all over
Buildroot.
Generate COPY_FILE subroutine which can be used
to copy a file.
$(COPY_FILE , file, directory, filename)
This will copy to binary dir and to the selected
copy dir if set in new config (intended to replace
all old COPYTO configs)
This is overridden by BUILDROOT_COPYTO,
if set into the environment.
2009-01-26 23:52:31 +00:00
Ulf Samuelsson
78fa0d4eb4
Update at91sam9260dfc BSP
2009-01-26 21:19:05 +00:00
Peter Korsgaard
87c5abadfa
target/device/Atmel/arch-avr32: remove old unused kernel patches
...
As discussed on the list:
22:08 < HcE> Jacmet: so yes, AVR32 wise you can delete anything older than
2.6.27
2009-01-26 21:10:11 +00:00
Ulf Samuelsson
8586be28d4
Replace BUILDROOT_KERNEL_CONFIG_METHOD environment variable with BUILDROOT_USE_XWINDOWS
2009-01-26 20:17:06 +00:00
Peter Korsgaard
d2c6e22040
linux/advanced: default to make menuconfig
2009-01-26 16:25:17 +00:00
Peter Korsgaard
7f4cb62a1b
u-boot: halt build early with description if no u-boot board name is set
2009-01-26 14:49:19 +00:00
Peter Korsgaard
3bab463be4
u-boot: clean up after Ulf
...
As discussed on the list.
2009-01-26 14:49:00 +00:00
Peter Korsgaard
6218173ce2
u-boot: mark 2008.10 version as recent
2009-01-26 14:04:10 +00:00
Ulf Samuelsson
377773e2f7
Fix erronous mkimage target
2009-01-26 11:46:44 +00:00
Ulf Samuelsson
f529db89db
Revert bad patch to fix linux rebuild problem
2009-01-26 10:38:00 +00:00
Ulf Samuelsson
86c392e504
Update patchlevels for linux-2.6.25/27/28
2009-01-25 23:42:09 +00:00
Ulf Samuelsson
147b034d0d
Ensure /boot exists, Write linux version to file,in case the kernel version has changed after the first build
2009-01-25 23:14:55 +00:00
Ulf Samuelsson
4374b75504
Revert Atmel boards back to desired operation
2009-01-25 21:53:14 +00:00
Ulf Samuelsson
9f20b5f97f
Use new SHELL variable BUILDROOT_KERNEL_CONFIG_METHOD
...
which will override selection between xconfig and menuconfig
make xconfig will, if it fails, or user does not save configuration
result in make menuconfig beeing tried
Fix several issues causing final part of linux to be regenerated
on each make.
2009-01-25 21:48:33 +00:00
Ulf Samuelsson
4f081d489d
Update at91sam9261ek BSP
2009-01-25 21:01:33 +00:00
Peter Korsgaard
7e41b89b56
target/linux-advanced: default to menuconfig for all archs
...
Default to menuconfig for atmel targets as well, mention QT3 dependency
for make xconfig and update affected defconfigs.
2009-01-25 20:11:31 +00:00
Ulf Samuelsson
d661484784
Add linux config for at91sam9261ek
2009-01-24 10:23:00 +00:00
Ulf Samuelsson
f5371f72f3
Update at91sam9260dfc BSP
2009-01-24 10:16:53 +00:00
Peter Korsgaard
7b981dbf06
Revert r24952 (BR2_TARGET_TEST_PACKAGES)
...
As discussed on the list. It is already out of date
(BR2_TARGET_UBOOT_2009_01_RC3, BR2_PACKAGE_RAIDTOOLS), is the wrong solution
and breaks the make allyesconfig; make menuconfig / sed workflow.
2009-01-23 20:45:30 +00:00
Ulf Samuelsson
9d51c94e35
Bump AT91 u-boot patches to 2009.01
2009-01-23 19:41:42 +00:00
Ulf Samuelsson
ce6ecb3b0a
Update at91sam9263ek BSP
2009-01-23 18:05:25 +00:00
Ulf Samuelsson
501c007158
Do not reapply linux patches if LINUX26_PATCH_SOURCE is empty, and we are continuing building after a failure
2009-01-23 00:54:23 +00:00
Ulf Samuelsson
6f39a7c62e
Update AT91 u-boot patches to 2009.01
2009-01-22 23:09:41 +00:00
Ulf Samuelsson
e4c96c2d26
Use latest u-boot as default
2009-01-22 18:46:00 +00:00
Peter Korsgaard
5f1fb36aa3
u-boot: add 2009.01, remove -rc3
2009-01-22 10:11:09 +00:00
Ulf Samuelsson
6fd0d36d32
Add simple way to enable most (but not all) targets for testing purposes
2009-01-22 07:53:24 +00:00
Ulf Samuelsson
2f4722048b
Fix AVR32 u.boot build bug
2009-01-22 07:39:12 +00:00
Peter Korsgaard
a5e5bdd51b
u-boot: unbreak target tools
...
Got broken by r24697.
2009-01-21 15:49:06 +00:00
Ulf Samuelsson
8a97f125ab
U_BOOT_ARCH_PATCH_DIR should contain a value or should not be defined, empty string is not allowed
2009-01-20 08:11:26 +00:00
Ulf Samuelsson
5a46761446
Bump u-boot to -2009.01-rc3, and add possibility to apply the arch-at91 patches if using an at91
2009-01-19 22:42:03 +00:00
Ulf Samuelsson
b71c76a10a
Fix some bugs in advanced linux configuration, remove some arbitrary combinations of major/minor directly supported, general cleanup
2009-01-19 21:27:04 +00:00
Peter Korsgaard
675b479c2f
Kconfig: remove 'default n' and 'default no' (see r22874)
...
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
2009-01-18 14:20:18 +00:00
Ulf Samuelsson
bdac3e337f
Update broken AVR32 toolchain, and update configs for this, deprecate all but latest AVR32 toolchain
2009-01-16 22:39:05 +00:00
Peter Korsgaard
3ff43a6838
buildroot: convert remaining WGET users to DOWNLOAD helper
2009-01-16 12:07:53 +00:00
Peter Korsgaard
ed5f6093c0
target/: convert to DOWNLOAD helper
2009-01-16 11:48:43 +00:00
Peter Korsgaard
d58636d765
buildroot: add BR2_BACKUP_SITE and DOWNLOAD helper
...
This is the long requested backup mirror support. So far only enabled
for Makefile.autotools.in, but there's no reason why we cannot use
DOWNLOAD everywhere.
Notice, I'm still syncing http://buildroot.uclibc.org/downloads/sources/
2009-01-16 10:27:48 +00:00
Peter Korsgaard
2b893123a5
BR2_PRIMARY_SITE: move to Mirrors and Download locations menu
2009-01-16 10:27:39 +00:00
Ulf Samuelsson
63e0cdb206
Update kernel snapshot version
2009-01-15 23:19:28 +00:00
Ulf Samuelsson
3f8d9b275f
Update at91sam9263ek BSP
2009-01-13 18:45:19 +00:00
Peter Korsgaard
a81367744f
buildroot: mark alpha as broken
...
It still doesn't build with threading + shared libs disabled
2009-01-13 15:14:21 +00:00
Peter Korsgaard
8161c45b89
buildroot: mark ia64, m68k, nios2, sparc and sparc64 as broken
...
No sense in showing the architecture options when they cannot even build
the toolchain.
2009-01-12 20:58:54 +00:00
Peter Korsgaard
b2c5b9109e
toolchain: fix cris build with 2.6.28 kernel headers
...
Patch by Hinko Kocevar <hinko.kocevar@cetrtapot.si>
2009-01-12 20:16:16 +00:00
Peter Korsgaard
b24c3215c1
buildroot: get rid of s390 support
...
As discussed on the list. It isn't supported by uclibc, so I strongly doubt
anyone has been using it.
2009-01-12 14:36:14 +00:00
Ulf Samuelsson
e791c63303
Update sam9263EK BSP
2009-01-12 10:25:31 +00:00
Ulf Samuelsson
0fac1d7d4b
Support large sector NAND flash for JFFS2
2009-01-12 00:43:22 +00:00
Ulf Samuelsson
e897b420fb
Update at91bootstrap to 2.10
2009-01-11 21:44:14 +00:00
Ulf Samuelsson
f4431ebb08
Move AT91 patches for u-boot-2009.01-rc1 to device/Atmel/arch-arm/u-boot/2009.01-rc1
2009-01-11 21:42:07 +00:00
Ulf Samuelsson
00a1ff5bc3
Remove premature deprecation of u-boot-1.2.0-atmel
2009-01-11 21:39:54 +00:00
Ulf Samuelsson
41950c0d2d
Update AVR32 uclibc config for 0.9.30
2009-01-11 21:15:46 +00:00
Ulf Samuelsson
83b2a67eec
Update defocnfig for ngw100
2009-01-11 21:15:08 +00:00
Ulf Samuelsson
bd8c8ab095
Add linux-2.6.27.10 config for stk100x
2009-01-11 21:14:17 +00:00
Ulf Samuelsson
06b9e7abe7
Move kernel localversion files to TARGET_DIR/boot
...
to allow packages which assumes that LINUX26_DIR
and the /lib/modules/LINUX_VERSION use
the consistent version numbering to build.
Create a file ".linux-version" containing
the real linux version in $(PROJECT_B UILD_DIR)
to allow packages to read the correct linux version
2009-01-11 20:43:24 +00:00
Ulf Samuelsson
7aa8a5acce
Update at91sam9261ek configs, build completes
2009-01-09 06:31:01 +00:00
Ulf Samuelsson
34b01cc4a1
Make sure U-boot is built, if we do make uImage
2009-01-09 06:30:08 +00:00
Ulf Samuelsson
4ff9d431b8
Update sam9263ek configs, build completes
2009-01-08 23:01:50 +00:00
Ulf Samuelsson
ab5c2cfc03
Linux26 requires "mkimage" from u-boot to be in the PATH
...
if an uImage is to be built for arm, avr32, blackfin and sh.
PATH has therefore been set to have $(STAGING_DIR)/usr/bin
as the first item allowing linux to find mkimage.
This patch will, if an uImage is built, create a "u-boot-toóls"
directory in the PROJECT_BUILD_DIR directory.
$(STAGING_DIR)/usr/bin/mkimage is copied to this directory
and the PATH variable will now include "u-boot-tools"
If an uImage is built, then the linux build will now depend on "u-boot".
2009-01-08 22:58:30 +00:00
Peter Korsgaard
9dd66ff7e9
target/u-boot: more cleanups
...
As discussed on the list.
- No sense in depending on BR2_TARGET_UBOOT when the configurations are
within a if BR2_TARGET_UBOOT conditional.
- n is default, so remove 'default n'
- clarify nested conditionals
2009-01-08 14:58:54 +00:00
Peter Korsgaard
2b75de900b
target/u-boot: cleanup
...
Fix s/Linux/U-Boot/ typo, default to the latest stable version, mark
old versions as deprecated and comment out unreleased version for now.
2009-01-08 14:58:51 +00:00
Ulf Samuelsson
03c16d10e2
Update atngw100 configs, needs patch from Atmel fork for strace to build correctly, otherwise disable strace
2009-01-06 23:02:50 +00:00
Ulf Samuelsson
036f1daaa0
Remove incorrrect dependency on latest minor kernel patch
2009-01-06 23:00:24 +00:00
Ulf Samuelsson
ec2eb199ca
Add PATH to linux build options to allow 'mkimage' to be found. Neccessary for arm,blackfin,sh and avr32 in linux-2.6.28
2009-01-06 21:42:43 +00:00
Ulf Samuelsson
c7b77e5669
Set default kernel to BR2_LINUX26_STABLE, Remove duplicate definion of BR2_KERNEL_CURRENT_VERSION and remove comments from Config.in choices
2009-01-06 21:24:42 +00:00
Ulf Samuelsson
3867e083e1
Update at91sam9260 Board Support Package to linux-2.6.28
2009-01-06 16:42:15 +00:00
Ulf Samuelsson
7e9a5c9500
Update AT91SAM9G20 Board Support to linux-2.6.28
2009-01-06 16:39:17 +00:00
Ulf Samuelsson
c299ec7a8d
Add support for SAM9G20 in at91bootstrap
2009-01-06 16:36:45 +00:00
Ulf Samuelsson
0082e57f16
Add CONFIGs for new commands to at91 parts
2009-01-06 16:24:42 +00:00
Ulf Samuelsson
3ab31f3a6a
Add support for waiting for NFS root server before booting
2009-01-06 16:24:06 +00:00
Ulf Samuelsson
756b2f1f98
Remove patches that should not have been inlcuded in the spimux commit
2009-01-06 16:21:36 +00:00
Ulf Samuelsson
ce5971ecca
Add 'mux' command to control ext mux on at91rm9200dk/ek
2009-01-06 16:17:43 +00:00
Ulf Samuelsson
d6afbb99b4
Add 'led' command to control coloured LEDs
2009-01-06 16:17:15 +00:00
Ulf Samuelsson
b4a6b4eaa4
Remove an extra #endif from u-boot.factory
2009-01-06 16:13:08 +00:00
Ulf Samuelsson
0590b0ff85
Fix some CFG/CONFIG related problems for AT91RM9200 configuration of U-Boot
2009-01-06 16:10:56 +00:00
Ulf Samuelsson
d5e3c2c55a
Use the correct sam9g20 patch for 2009.01-rc1
2009-01-06 16:09:53 +00:00
Ulf Samuelsson
b33e097596
When you set BR2_PACKAGE_LINUX_USE_DEFCONFIG
...
to configure linux using the
make <board>_defconfig
You have to supply the $(BOARD_NAME) variable.
Add this info in the help text for
target/linux/Makefile.in.advanced
----------------
When you do not set BR2_PACKAGE_LINUX_USE_XCONFIG
to configure linux using "$make <XXXX>config
The choices "$make menuconfig" or "$make xconfig"
should not be visible.
Add dependency
2009-01-06 14:40:24 +00:00
Ulf Samuelsson
6bcd872614
Use PROJECT-u-boot-VERSION-DATE.bin as u-boot target
...
Provide link using "u-boot.bin"
Add BR2_TARGET_UBOOT_DEFAULT_ENV config
If this is set, Buildroot will generate
a default environment to allow easy downloading
of the kernel and root file system
Both as compile time data and an autoscript.
Make u-boot depend on $(U_BOOT_TARGETS)
Add "u-boot-autoscript" to U_BOOT_TARGETS if
BR2_TARGET_UBOOT_DEFAULT_ENV is set.
Take kernel name from Linux build.
Use correct ARCH when mkimaging the autoscript.
Do not use TARGET_ATMEL_COPYTO for generic u-boot.
Hide dataflash memory configurations when
different boot memory is used.
2009-01-06 14:16:27 +00:00
Peter Korsgaard
1250acd942
u-boot: unbreak build after r24674
...
Disable broken autoscript handling so the build atleast completes
2009-01-05 16:16:30 +00:00
Peter Korsgaard
62ee161f0d
u-boot: revert U_BOOT_TARGET part of r24646
...
More u-boot build unbreaking. r24646 added U_BOOT_TARGET which uses the
nonexisting BOARDNAME variable, which means that the filename expands
to -u-boot-*, confusing ln.
There's limited point in having that symlink in the first please, so simply
revert that hunk.
2009-01-05 16:12:34 +00:00
Peter Korsgaard
f7870ba027
u-boot: unbreak build after r24646
...
Unset variables aren't the same as "".
2009-01-05 15:52:44 +00:00
Peter Korsgaard
585aca9a5a
add .empty files for git-svn
...
git-svn (and git) doesn't handle empty directories, so add .empty files
to those dirs like elsewhere in buildroot.
Those empty directories are normally not a big deal, but the recent changes
to u-boot broke the build.
2009-01-05 15:47:00 +00:00
Ulf Samuelsson
2d696140c2
Allow use of uClibc-0.9.30 for AVR32 toolchain
2009-01-03 16:25:47 +00:00
Ulf Samuelsson
cc30201f47
Update target/device/Atmel/*/Makefile.in
...
------------------------------------------
Replace $(BOARDNAME)_PATH with BOARD_PATH
Set U-Boot targets for 1.2.0-atmel as well as 2009.01-rc1
Remove hardwiring of BusyBox configuration files.
Remove older BusyBox configuration files
Remove "at91sam9260dfc-linux-2.6.28-rc6.config" from at91sam9g20dfc directory
Update "at91rm9200df_defconfig"
Add "at91rm9200df-linux-2.6.28.config"
Update "at91sam9260dfc_defconfig"
2009-01-03 16:10:50 +00:00
Ulf Samuelsson
c7066b1807
Generate an autoscript for configuring u-boot in $(BINARIES_DIR)
...
mkimage the autoscript to autoscript.$(PROJECT)-
Move build of u-boot-1.2.0-atmel to target/u-boot
Only visible for AT91 targets.
Fetch prepatched 1.2.0-atmel tarball from $(BR2_ATMEL_MIRROR)
Rest from normal location.
Introduce U_BOOT_CONFIGURE_OPTS
Set to NOSOFT_FLOAT for u-boot-1.2.0-atmel
Disable target/device/Atmel/u-boot
Keep files in target/device/Atmel/u-boot during a test period.
Files:
M target/device/Atmel/Makefile.in
M target/device/Atmel/Config.in
M target/u-boot/Makefile.in
M target/u-boot/Config.in
A target/u-boot/1.2.0-atmel
2009-01-03 15:50:38 +00:00
Nigel Kukard
98eefe7074
Fixed missing "
2009-01-03 15:03:16 +00:00
Ulf Samuelsson
4eb79e2732
Update linux versions
2009-01-03 01:06:36 +00:00
Ulf Samuelsson
d2485586b9
Fix remaining 'butterfinger' issue
2009-01-03 00:40:02 +00:00
Ulf Samuelsson
5dec4da010
Remove debugging variable added to svn by mistake, (Thanks Pter)
2009-01-03 00:07:25 +00:00
Ulf Samuelsson
7213dae7a5
Add support for at91sam9g20 to U-Boot
2009-01-03 00:06:13 +00:00
Ulf Samuelsson
fc6be2d970
Add facilities for installing u-boot in different locations
2009-01-03 00:05:42 +00:00
Ulf Samuelsson
f563fc9565
Provide factory default command to u-boot, using Buildroot variables
2009-01-03 00:04:55 +00:00
Ulf Samuelsson
75c6381110
Fix issue with AT91/AVR32 Ethernet MACB
2009-01-03 00:04:14 +00:00
Ulf Samuelsson
ff9b66d5d0
Add X-Modem tools for minicom to u-boot allowing easy downloading of U-Boot
2009-01-03 00:03:31 +00:00
Ulf Samuelsson
b00e4bf529
Add Memory configration to u-boot (Config.in) and remove comments from 'choice's', Rearrange options for clarity
2009-01-03 00:02:07 +00:00
Ulf Samuelsson
e074c38220
Add Memory configuration to U-Boot build, remove some debugging info
2009-01-03 00:00:46 +00:00
Ulf Samuelsson
abda401711
Support AT91 in vanilla U-Boot
2009-01-02 11:18:09 +00:00
Ulf Samuelsson
e195cb19f2
Update at91sam9260dfc BSP
2009-01-02 08:32:25 +00:00
Peter Korsgaard
69f8592407
buildroot: set SHELL instead of messing around with CONFIG_SHELL
...
Simply set SHELL to bash instead of adding CONFIG_SHELL to all shell
invocations. CONFIG_SHELL is still set, as it is used by kconfig.
2009-01-01 21:20:35 +00:00
Nigel Kukard
33b846773a
* Added "generic" option to x86_64 target
...
- Default to generic and not core2
2009-01-01 17:48:06 +00:00
Ulf Samuelsson
3de57c4447
Update kernel patch from 2.6.28-rc6 to 2.6.28
2008-12-30 08:26:51 +00:00
Ulf Samuelsson
e2ba403798
Use correct filename for patch
2008-12-29 15:13:32 +00:00
Ulf Samuelsson
b9dc2a4b66
Use correct filename for patch
2008-12-29 15:12:10 +00:00
Peter Korsgaard
cd7245fc11
target/generic: add ttyAMAx device nodes (E.G. for qemu-system-arm)
2008-12-23 14:54:49 +00:00
Ulf Samuelsson
350ced4a71
Add updated gcc-4.2.2 prepatched toolchain for AVR32
2008-12-20 22:27:56 +00:00
Ulf Samuelsson
039ed4b223
Add AP7200 eval kit configuration
2008-12-20 22:26:24 +00:00
Ulf Samuelsson
207503d59e
Add BSP for AP7200
2008-12-20 22:24:11 +00:00
Ulf Samuelsson
736235cb0f
Add support for AT32AP7200
2008-12-20 22:23:15 +00:00
Ulf Samuelsson
c923379e8a
Add 2.6.27.7 patches for AVR32
2008-12-20 22:19:38 +00:00
Ulf Samuelsson
80b526fd3c
Hide AT91 features if not an AT91 ARM
2008-12-20 22:17:52 +00:00
Ulf Samuelsson
1942056ae7
Use correct linux version when applying latest minor patch
2008-12-20 21:45:59 +00:00
Ulf Samuelsson
2ee2248cc4
Sort Linux debug info in alphabetical order
2008-12-20 21:45:05 +00:00
Ulf Samuelsson
f0ebb39d18
Put latest version info in separate file for easier maintenance
2008-12-20 20:57:07 +00:00
Ulf Samuelsson
fc92f159bb
Update to latest linux versions
2008-12-17 18:03:29 +00:00
Ulf Samuelsson
7591247d51
Remove AVR32 target variants, the current entries refers to CHIPS which have the same CPU core, CHIP variant is defined elsewhere
2008-12-17 09:28:33 +00:00
Peter Korsgaard
7139678f78
make the default etc/init.d/S40network compatible with msh
...
msh is currently the only good choice for uClinux but it doesn't
understands shell functions. In this case there is nothing to gain
by using shell functions anyway.
Signed-off-by: Nicolas Pitre <nico@cam.org>
2008-12-08 14:52:16 +00:00
Peter Korsgaard
7cb7952b40
target/initramfs: actually build initramfs target
...
Currently, BR2_TARGET_ROOTFS_INITRAMFS doesn't actually do anything,
as it doesn't alter $(TARGETS)
This change hooks up the TARGETS variable to INITRAMFS_TARGET (which
is only set if BR2_TARGET_ROOTFS_INITRAMFS=y), so that the initramfs
list is built.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-12-08 13:42:04 +00:00
Peter Korsgaard
326ae9c89b
target/tar: remove unused cut'n'paste leftover
2008-12-08 09:07:01 +00:00
Peter Korsgaard
224c62ecf8
target: paths may need stripping
...
r24310 removed a few too many strips.
2008-12-08 09:06:59 +00:00
Peter Korsgaard
4b72854dde
target/: get rid of unneeded $(strip ..)
2008-12-08 08:15:58 +00:00
Peter Korsgaard
6dbe1188de
taget/linux: handle non-modular kernels
...
Based on b151271 in Bernhard's tree.
2008-12-07 06:55:36 +00:00
Thomas Petazzoni
be5be0ec5a
Compiling current SVN fails with the following error for me:
...
cc1: warnings being treated as errors
buildroot/buildroot/build_powerpc/makedevs/makedevs.c: In function main:
buildroot/buildroot/build_powerpc/makedevs/makedevs.c:531: error:
ignoring return value of system, declared with attribute warn_unused_result
This change adds a simple warning if system() fails.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2008-12-02 22:26:00 +00:00
Peter Korsgaard
63402d7737
target/cramfs/cramfs.mk: Fix device table not being passed to mkcramfs
...
While mkcramfs was being patched to support a device table, the target device table was not being passed to the mkcramfs options. This patch fixes that
Signed-off-by: Jared Holzman <j.holzman@genesysdesign.com.au>
2008-12-02 09:15:08 +00:00
Ulf Samuelsson
1158bc9a25
Add support for AT91SAM9G20 & -EK
2008-11-29 22:00:29 +00:00
Ulf Samuelsson
074da836d2
Add AT91 support for 2.6.27.7 and 2.6.28-rc6
2008-11-29 21:58:48 +00:00
Ulf Samuelsson
4f1887e424
Update Linux versions
2008-11-29 21:56:25 +00:00
Peter Korsgaard
193508d257
linux: remove unused BR2_LINUX_BOARD_PATCH
...
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
2008-11-14 13:39:58 +00:00
Peter Korsgaard
204821c56c
target/Config.in.toolchain: cleanup
2008-11-14 10:06:44 +00:00
Ivan Kuten
da6f419424
revert 23987 until proper implementation
2008-11-10 11:17:21 +00:00
Ivan Kuten
1f370768bc
Download Kernel.org minor patches at the same time as full sources.
...
Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
2008-11-10 10:45:46 +00:00
Thomas Petazzoni
f5ca546b76
Fix Grub tarball version as the current version has disappeared from
...
Debian mirrors.
Patch provided by Roberto A. Foglietta <roberto.foglietta@gmail.com>
2008-11-08 22:24:39 +00:00
Hans-Christian Egtvedt
12b5b0124b
linux26: make installation of modules rule depend on .depend_done
...
This patch will make the installation of modules rule depend on .depend_done instead of .configured to make sure make prepare is run before modules are installed.
Make kernelversion does not work before make prepare has been run.
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
2008-11-05 12:59:32 +00:00
Peter Korsgaard
ab1c8b3943
Kernel build fix related to external toolchain use
...
This patch prevents the user from select "linux (Same version as linux
headers)" as a choice for building the kernel when an external binary
toolchain is used, since "same version as linux headers" doesn't make
sense when an external toolchain is used.
It fixes the issue encountered by Hartley <hartleys@visionengravers.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2008-11-04 19:58:48 +00:00
Peter Korsgaard
e9bbc07625
syslinux: fix download url
2008-11-02 19:21:12 +00:00
Arnar Mar Sigurðsson
057eca1834
Update valka target
2008-10-31 17:22:59 +00:00
Hans-Christian Egtvedt
fc23ee8dea
linux: skip installing modules if modules are disabled in kernel config
...
This patch will check if CONFIG_MODULES is set in the kernel .config, if not
yes then it will skip installing the modules.
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
2008-10-30 14:56:58 +00:00
Hans-Christian Egtvedt
fed8349509
linux: make touch also create the dependency file when installing modules
...
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
2008-10-30 14:22:11 +00:00
Hans-Christian Egtvedt
aabaf095a0
linux: fix typo in status printout
...
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
2008-10-30 14:02:47 +00:00
Hans-Christian Egtvedt
4c1a34471d
linux: add probing for kernel version when installing modules
...
This patch will ask the kernel for the specific version before doing
modules_install, that way Buildroot will know which directories to remove and
what parameters to use for depmod. Needed when compiling a kernel grabbed from
GIT or vendor specific releases.
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
2008-10-30 14:02:05 +00:00
Peter Korsgaard
cb9d03ca6e
target: add /sys directory to target skeletons needing it
...
The remaining target_skeletons where /etc/fstab mentions sysfs
2008-10-18 13:00:58 +00:00
Peter Korsgaard
ca672dc4dc
target/device/Atmel: add /sys to target skeletons
...
Reported by John Schimandle
2008-10-18 12:47:42 +00:00
Peter Korsgaard
921eb994f8
Add Xilinx UARTLITE and MPC5200 PSC device files (serial ports)
...
From: Grant Likely <grant.likely@secretlab.ca>
The Xilinx UART Lite and MPC5200 Programmable Serial Controller (PSC)
devices have dedicated major/minor numbers. Add them to the device
table data file so they get are present in the root filesystem
2008-10-17 10:19:41 +00:00
Hans-Christian Egtvedt
0fbec516fd
linux: fix copy of Busybox config to target directory
...
This patch fixes bug report #5204 . The Busybox config was not copied from the
correct place.
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
2008-10-03 07:24:34 +00:00
Peter Korsgaard
5c662fee80
target/linux/advanced: don't hardcode date suffix
...
Use ROOTFS_SUFFIX instead of hardcoding -$(DATE).
Reported by Lars Lockenvitz.
2008-09-22 12:04:05 +00:00
Peter Korsgaard
49e3aba2d9
target/generic: add uartlite ttyULx devices to securetty
2008-09-16 18:44:54 +00:00
Peter Korsgaard
8a00a1ac65
jffs2: cleanup
...
Patch by Markus Heidelberg <markus.heidelberg@web.de>
* remove needless help in invisible config options
* correct wrong indenting
* remove unused BR2 variables for default pagesize and devfile
2008-09-07 14:31:39 +00:00
Peter Korsgaard
f8bc2e1e31
target/generic/mini: remove udhcpc default.script entry
...
It isn't provided in the target skeleton, and avahi gets the
permissions correct so it isn't needed and just confuses users.
2008-08-31 06:26:40 +00:00
Peter Korsgaard
b71d24d032
ubifs: fix long help text lines
2008-08-27 20:19:53 +00:00
Peter Korsgaard
df6555a017
cloop: fix long help text lines
2008-08-27 20:19:50 +00:00
Peter Korsgaard
98f17d003c
target/device/jp: fix long help text lines
2008-08-27 20:18:40 +00:00
Peter Korsgaard
f1258adf6b
target/device/Atmel: fix long help text lines
...
And remove trailing spaces while we're at it.
2008-08-27 20:18:37 +00:00
Peter Korsgaard
dc8423d97f
squashfs: bump version
2008-08-27 07:46:55 +00:00
Ulf Samuelsson
cc1ab5e670
Update AT91 patches to latest Linux
2008-08-23 20:45:42 +00:00
Ulf Samuelsson
fd3742248d
Add configurations for current linux versions
2008-08-23 20:25:29 +00:00
Peter Korsgaard
644b251f62
u-boot: bump version
2008-08-20 20:04:18 +00:00
Peter Korsgaard
b4aeef0f1c
u-boot: fix broken insert_define in Makefile
...
Patch by Markus Heidelberg <markus.heidelberg@web.de>
2008-08-20 20:04:14 +00:00
Peter Korsgaard
b7a45746a4
u-boot: fix wrong syntax in Makefile
...
Patch by Markus Heidelberg <markus.heidelberg@web.de>
Some $(call insert_define, ..., ...) calls were lacking the comma after
the variable. That didn't lead to a syntax error but it didn't have any
effect on the output u-boot/include/config.h
2008-08-20 20:04:11 +00:00
Peter Korsgaard
0fa75a11ee
target/device: enable uclibc globbing support
...
Enable UCLIBC_HAS_GNU_GLOB like in the generic config for target specific
uclibc configs. Fixes globbing issue reported on the uclibc list.
2008-08-14 06:52:15 +00:00
Peter Korsgaard
02a623ddf9
buildroot: remove trailing spaces
...
for i in `find -name 'Config*' -o -name 'Makefile*' -o -name '*.mk'`;
do
sed -i 's/ \+$//' $i;
done
2008-08-04 19:07:05 +00:00
Peter Korsgaard
4683420c4c
Kconfig: remove 'default n'
...
'default n' is the default, so there's no need to say it explicitly.
2008-07-17 20:01:44 +00:00
Peter Korsgaard
38e12fd263
linux-advanced: add linux26-force like in the simple linux makefile
...
Patch by Brian Beattie.
2008-07-13 06:32:58 +00:00
Ulf Samuelsson
04a4d946fc
Do not use a localversion of kernel, to allow modules to be installed in the correct directory
2008-07-10 16:12:36 +00:00
Ulf Samuelsson
42b7d4bf56
Add AVR32 patches for 2.6.25.10
2008-07-10 15:15:52 +00:00
Ulf Samuelsson
e49a025f4b
Fix comments regarding latest stable kernel
2008-07-10 15:14:17 +00:00
Ulf Samuelsson
2e350eb011
Update 'latest' kernel info
2008-07-10 14:58:04 +00:00
Peter Korsgaard
6b539be71b
linux: add knob to force a rebuild of the kernel
...
Makes development easier. Thanks to Brian Beattie for this handy idea.
1df013316b in Bernhards tree.
2008-07-09 11:43:57 +00:00
Peter Korsgaard
91f7f887c4
uboot: revert r22638
...
Go back to 1.3.2 as r22638 breaks mkimage
2008-07-08 10:53:17 +00:00
Ulf Samuelsson
65f89c8a9c
Update atngw100-expanded defconfig
2008-07-06 06:27:00 +00:00
Ulf Samuelsson
81164a3c79
Update atstk100x defconfig
2008-07-06 06:19:12 +00:00
Ulf Samuelsson
3724c23a4d
un-deprecate gcc-4.2.1 for AVR32 external toolchain
2008-07-05 21:57:23 +00:00
Ulf Samuelsson
bbb4dc83d6
Run AVR32 toolchain with Sysroot (will fail if not enabled), deprecate 4.1.2 and 4.2.1
2008-07-05 06:37:17 +00:00
Ulf Samuelsson
9c42810165
Update atstk100x defconfig
2008-07-04 22:23:20 +00:00
Ulf Samuelsson
db56ec0fd3
Bump U-Boot version to 1.3.3
2008-07-04 22:18:56 +00:00
Ulf Samuelsson
64316d383b
Update atstk100x defconfig
2008-07-04 11:18:58 +00:00
Ulf Samuelsson
44eb224465
Update defconfig for atngw100-expanded
2008-07-04 10:48:31 +00:00
Ulf Samuelsson
063e2855bc
Update busybox config for atngw100-expanded
2008-07-04 10:47:20 +00:00
Ulf Samuelsson
9917737dc7
Use a more consistent name for the atngw100-expanded defconfig
2008-07-04 10:45:41 +00:00
Ulf Samuelsson
6e1d4ab424
Update configs for atngw100-base
2008-07-04 10:38:40 +00:00
Ulf Samuelsson
e8106da816
Fix Config conflict caused by duplicate definition in KB9202 BSP
2008-07-04 10:36:55 +00:00
Ulf Samuelsson
283e81ab9e
Update atngw100 defconfig
2008-07-04 10:36:18 +00:00
Ulf Samuelsson
126bb72fa0
Add prepatched AVR32 gcc-4.2.2 toolchain from www.atmel.no, move patch locations for prepatched toolchain to be under the toolchain directory
2008-07-04 08:39:35 +00:00
Ulf Samuelsson
a4b1e9c7ff
Enable KB9202 board in Config
2008-07-03 08:29:26 +00:00
Ulf Samuelsson
e27fef5183
Add support for KwikByte KB9202 board, courtesy Brian Beattie
2008-07-03 08:27:50 +00:00
Ulf Samuelsson
41e6a671f3
Add support for latest kernels
2008-07-03 08:15:49 +00:00
Ulf Samuelsson
f27f3046ff
Add AT91 patches for 2.6.25 and 2.6.25-rc3
2008-07-03 08:11:04 +00:00
Thiago A. Corrêa
8244737dac
Update avr32 defconfigs
2008-07-02 15:43:58 +00:00
Thiago A. Corrêa
a1d845f168
Remove trailing quote from help lines
2008-07-02 00:17:21 +00:00
Peter Korsgaard
66acd5b9e8
generic: fix fb1..3 device_table.txt entries
2008-06-30 15:24:23 +00:00
Peter Korsgaard
a5ac61715b
buildroot: s/depends/depends on/
...
The new kconfig is more strict regarding depends/depends on, so fixup
the tree.
2008-06-19 19:06:25 +00:00
Peter Korsgaard
ebd3916b59
u-boot tools: make sure destination directory exists
2008-06-17 08:04:15 +00:00
Peter Korsgaard
1828845345
u-boot: don't depend on gcc (not needed and not provided by ext toolchain)
2008-06-13 13:46:42 +00:00
Peter Korsgaard
3094bf2b35
u-boot: cleanup arch handling
...
Thanks to Hamish Moffatt.
2008-06-12 07:27:48 +00:00
Peter Korsgaard
871896a93e
u-boot: evaluate U_BOOT_ARCH at use time, rather than Makefile parse time
...
U_BOOT_ARCH seems to race with KERNEL_ARCH in some situations,
so it end up empty. It's only used once, so fix it by using a
use-time evaluated variable instead (=).
2008-06-11 13:07:03 +00:00
Peter Korsgaard
6d0862e422
generic target_skeleton: add /sys to fstab
2008-05-31 07:27:43 +00:00
Peter Korsgaard
5ec6ca9f20
generic target_skeleton: mark /sys with .empty file
...
/sys somehow didn't got an .empty file like the rest in r21586. Fixed.
2008-05-31 07:27:40 +00:00
Ulf Samuelsson
cb0a2e6105
Make linux kernel extension visible also when defined in board directory
2008-05-12 21:15:32 +00:00
Nigel Kukard
714df8fb60
features.h should never be included explicitly.
...
This fixes the bug where "File not found" error is reported by grub.
This fix works under both uclibc and glibc.
2008-05-12 18:56:11 +00:00
Peter Korsgaard
7d77306f29
toolchain: fix mips abi selection
...
Based on commit 0e2ab in aldot's tree.
2008-05-12 12:43:57 +00:00
Ulf Samuelsson
85df60a8ec
Update BR2_ATMEL_MIRROR in defconfigs
2008-05-06 01:38:09 +00:00
Ulf Samuelsson
3603cb5114
Fix dependencies in Configs
2008-05-06 01:37:26 +00:00
John Voltz
4037d58163
update patches for atngw100_expanded
2008-05-01 17:15:35 +00:00
John Voltz
804e373d06
add menu.lst for grub
2008-05-01 17:14:46 +00:00
Peter Korsgaard
a25b193708
squashfs: set sensible permissions on squashfs image
2008-04-25 12:04:04 +00:00
John Voltz
701475f791
This patch renames the Atmel atstk1002 target board to a more generic atstk100x name. This to make it easier to add support for other CPU-boards than atstk1002.
...
Submitted by Hans-Christian Egtvedt
2008-04-24 11:22:06 +00:00
Peter Korsgaard
d8dcacdab1
u-boot: support platform-independent patches
...
Support platform independent patches (.patch) and use .patch.$ARCH for
platform dependent ones like elsewhere.
2008-04-23 14:52:38 +00:00
Peter Korsgaard
a40d635ec0
u-boot: don't error on existing symlink
2008-04-23 14:52:35 +00:00
Peter Korsgaard
5cc50fcb68
u-boot: tools in target (mkimage, fw_printenv and fw_setenv)
2008-04-23 13:03:53 +00:00
Peter Korsgaard
d3359c9323
u-boot: use correct ARCH
2008-04-23 13:03:50 +00:00
Peter Korsgaard
a2f4d5164e
u-boot: clean: also remove mkimage from staging_dir
2008-04-23 13:03:47 +00:00
Peter Korsgaard
bb0a617e12
u-boot: set ARCH and CROSS_COMPILE
2008-04-23 10:30:03 +00:00
Ulf Samuelsson
b977f1b19d
Update at91sam9261ek defconfig
2008-04-16 23:00:58 +00:00
Ulf Samuelsson
4f9c37d960
Avoid duplicate rules for downloading kernel source, if kernel and headers are the same
2008-04-16 22:54:46 +00:00
Ulf Samuelsson
f5e9fe17b2
Fix bad linux kernel name
2008-04-16 22:45:47 +00:00
Ulf Samuelsson
ed638f6feb
Allow build to complete, even if tftpboot is not writeable by user
2008-04-15 21:46:47 +00:00
Ulf Samuelsson
1262117ee6
Reversing bad tftpboot patch resulting in two identical targets
2008-04-15 17:10:24 +00:00
Peter Korsgaard
bcf8f7ca9e
buildroot: additional tftpboot fixes
...
Patch by Jean-Christian de Rivaz
2008-04-11 21:32:09 +00:00
Ulf Samuelsson
8eb01e4a05
Add configuration items to at91bootstrap
2008-04-10 21:05:30 +00:00
Ulf Samuelsson
29feba9db8
Avoid hardwiring tftpboot
2008-04-10 21:03:27 +00:00
Ulf Samuelsson
882a9d2dd2
Avoid hardwiring tftpboot
2008-04-10 21:02:12 +00:00
Peter Korsgaard
6d5ecc1e51
u-boot: fix custom patch handling
2008-04-09 07:02:20 +00:00
Peter Korsgaard
1befc6edd2
u-boot: bump version
2008-04-09 07:02:16 +00:00
Hamish Moffatt
4b4524e18a
Fix UBI compression options
2008-04-08 04:28:18 +00:00
Hamish Moffatt
7294525c6a
Update to mkfs.ubifs v0.4 release. Note that you need the latest ubifs
...
kernel code because the on-flash format has changed.
2008-04-07 01:44:06 +00:00
Nigel Kukard
942be8ba84
Fixed typo in cpioroot, we're working with CPIO_BASE not TAR_TARGET
2008-04-06 13:14:07 +00:00
Ulf Samuelsson
186cd571e6
Use lower case
2008-04-06 10:32:34 +00:00
Nigel Kukard
4b6620b31b
* Dereference link when copying over kernel image, missed this one in my previous commit
2008-04-06 10:30:18 +00:00
Ulf Samuelsson
c92d851caa
Make xconfig the default for Atmel targets
2008-04-06 10:10:30 +00:00
Ulf Samuelsson
f9dc95c230
Update linux source tree with minor version
2008-04-06 10:02:53 +00:00
Peter Korsgaard
d5b8a665b5
target/device/ARM: Use menuconfig and add description of options
2008-04-06 08:19:58 +00:00
Peter Korsgaard
226a087e89
target/device/ARM: Don't override Config settings
...
Don't override board name/path with hardcoded values in Makefile.
2008-04-06 08:08:07 +00:00
Peter Korsgaard
6ddae853f4
target/device/ARM: remove unused busybox config
2008-04-05 16:59:44 +00:00
Peter Korsgaard
f53f0efaaa
target/device/ARM: don't override busybox config
2008-04-05 16:11:03 +00:00
Peter Korsgaard
824e0449b7
kernel: default to not build a kernel
2008-04-04 07:24:15 +00:00
Hamish Moffatt
df43e6a890
Add ubifs target
2008-04-04 04:25:18 +00:00
Peter Korsgaard
0c33ede996
gzip, diff, grub: bump versions
...
Patch by andrewma (closes #2754 )
2008-04-03 09:28:56 +00:00
Hamish Moffatt
4b01dfced9
Add romfs target support, courtesy Josh <buildroot@digitalpeer.com>
2008-04-02 00:18:57 +00:00
Peter Korsgaard
34274164d9
buildroot: additional -clean target fixes
...
Patch by Hebbar.
2008-04-01 07:03:07 +00:00
Ulf Samuelsson
0e65446676
Patch in EXTRA_VERSION
2008-03-31 05:42:03 +00:00
Ulf Samuelsson
63342eab23
Add Configs for new boards
2008-03-30 22:23:39 +00:00
Peter Korsgaard
01c5168579
target_skeleton: mark empty directories with .empty files
...
Mark empty directories in target skeletons with .empty files
and remove them while copying to target (like it's already done for
svn and cvs files) to better support version control system which don't
handle empty directories (E.G. git-svn).
2008-03-30 20:45:42 +00:00
Ulf Samuelsson
697dd2ed93
Update at91 defconfigs
2008-03-30 20:42:40 +00:00
Peter Korsgaard
0a7c0c04f1
linux advanced: make menuconfig default
2008-03-30 20:22:13 +00:00
Ulf Samuelsson
62ce637fed
Allow selection of kernel config tool
2008-03-30 20:04:55 +00:00
Nigel Kukard
49bb82c9f4
* Removed GCC 4.2.0, added GCC 4.2.3 (take 2)
2008-03-30 08:12:22 +00:00
Ulf Samuelsson
c659b13a2f
Remove duplicate AVR32 patches, and add support for ARCH and conditional AVR32 patches
2008-03-29 23:09:46 +00:00
Ulf Samuelsson
230723920a
Remove duplication of default kernel patch dir setting
2008-03-29 20:39:36 +00:00
Ulf Samuelsson
5292603285
Remove duplication of default kernel patch dir setting
2008-03-29 20:38:22 +00:00
Ulf Samuelsson
4523eb3cc7
Remove duplication of default kernel patch dir setting
2008-03-29 20:36:54 +00:00
Ulf Samuelsson
936db68f25
Remove duplication of default kernel patch dir setting
2008-03-29 20:36:24 +00:00
Nigel Kukard
0bda43bec9
Feeding the kernel zero optimization -O0 breaks the kernel build at least on x86 with asm errors, remove -O0 when building the kernel
2008-03-29 17:47:36 +00:00
Ulf Samuelsson
acdf16967d
Add some robustness to linux configuration
2008-03-29 14:09:22 +00:00
Nigel Kukard
80f199c3d8
* Reverted r21540
2008-03-28 22:08:37 +00:00
Nigel Kukard
643dd9b609
* Bumped GCC to 4.2.2, removed 4.2.0
2008-03-28 21:03:04 +00:00
Ulf Samuelsson
00bd182a5f
Define busybox config in board directory for Atmel boards
2008-03-28 07:32:54 +00:00
John Voltz
c2fe2a53dd
kernel 2.6.24 creates a symlink to bzImage, which is copied inplace, symlink and all, this gives an incorrect symlink deref in binaries/uclibc/ and points to ../../x86/bzImage. Do not copy symlink in place, follow it. Patch by Nigel Kukard.
2008-03-21 17:57:02 +00:00
Ulf Samuelsson
374f8383b9
Add generic ARM target, if none other is choosen
2008-03-20 23:04:30 +00:00
Ulf Samuelsson
42b0271533
Use x86 Makefile only if x86 is choosen
2008-03-20 23:03:40 +00:00
Ulf Samuelsson
aa67fcdbf8
Use correct symbold for linux config path
2008-03-20 23:02:41 +00:00
Ulf Samuelsson
d7592743c3
Ensure at least one ARM board is selected, if ARMLTD selected
2008-03-20 22:31:50 +00:00
Ulf Samuelsson
9169fcccc9
Do not include Soekris, unless i386 arch
2008-03-20 22:07:49 +00:00
Ulf Samuelsson
10cacfa02d
Move ARM target to ARMLTD target to prepare for generic ARM
2008-03-20 22:06:10 +00:00
Ulf Samuelsson
1fdfb9e305
Fix AVR32 ext toolchain
2008-03-19 07:26:34 +00:00
Ulf Samuelsson
5bca4c9447
Add a defconfig for x86
2008-03-18 14:32:54 +00:00
Ulf Samuelsson
43bc815a5a
Use correct kernel-patch for x86
2008-03-18 13:26:13 +00:00
Ulf Samuelsson
03c71010d1
Add linux prefix to patches
2008-03-18 12:04:05 +00:00
Ulf Samuelsson
9ebad46f49
Use same name for same patch
2008-03-18 12:03:01 +00:00
Ulf Samuelsson
412ef4e322
Use same name for same patch
2008-03-18 12:02:40 +00:00
Ulf Samuelsson
ce647a69fe
Use same name for same patch
2008-03-18 12:02:16 +00:00
Ulf Samuelsson
865ac9844c
Use BOARD_PATH instead of BR2_BOARD_PATH for x86
2008-03-18 11:51:43 +00:00
Ulf Samuelsson
acd95e608d
Use BOARD_PATH instead of SOEKRIS_NET4801_PATH
2008-03-18 11:47:31 +00:00
Ulf Samuelsson
f827151c36
Use BOARD_PATH instead of SHARP_LNODE80_PATH
2008-03-18 11:43:00 +00:00
Ulf Samuelsson
a53996b2a6
Use BOARD_PATH instead of BR2_BOARD_PATH for mips target
2008-03-18 11:41:03 +00:00
Ulf Samuelsson
fe87235dfe
Use BOARD_PATH instead of JP_Q5_PATH
2008-03-18 11:38:36 +00:00
Ulf Samuelsson
bd10a460b3
Use BOARD_PATH instead of ALCHEMY_DBAU1500_PATH
2008-03-18 11:34:43 +00:00
Ulf Samuelsson
896cfb2afe
Remove duplicate patches and arrange according to architecture
2008-03-18 09:36:16 +00:00
Ulf Samuelsson
771ecd45c1
Use latest kernel for at91sam9260
2008-03-18 08:56:51 +00:00
Ulf Samuelsson
a1be1243a3
Update Kernel config
2008-03-18 08:17:06 +00:00
Ulf Samuelsson
d97812e3a5
Update sam9260 defconfig
2008-03-17 23:06:32 +00:00
Ulf Samuelsson
6ddaf88176
Use correct Linux version for depmod
2008-03-15 05:07:26 +00:00
Ulf Samuelsson
cde20f0b08
Use 2.6.24 as default for at91sam9260dfc
2008-03-12 01:13:46 +00:00
Ulf Samuelsson
8426570482
Add support for 2.6.24 for AT91
2008-03-12 01:04:17 +00:00
Ulf Samuelsson
9bb163d898
add missing busybox config
2008-03-12 00:10:36 +00:00
John Voltz
93256ce2d7
removed duplicate config.in reference
2008-03-11 19:28:06 +00:00
Peter Korsgaard
25a7363f5d
buildroot: use BR2_KERNEL_MIRROR everywhere
...
Based on patch by Nigel Kukard.
2008-03-11 18:54:17 +00:00
John Voltz
a199616e78
fix for defconfig
2008-03-11 18:32:17 +00:00
John Voltz
7f4141ae20
separate u-boot for at91 arm and everything else
2008-03-11 18:26:07 +00:00
John Voltz
944e92856a
updated defconfig
2008-03-11 18:17:02 +00:00
John Voltz
10e48dbc74
updated defconfig
2008-03-11 17:58:47 +00:00
John Voltz
36be219225
download url was invalid
2008-03-11 16:19:33 +00:00
Peter Korsgaard
7791b4e80f
buildroot: fix missing ARCH for some x86 variants
...
Patch by Nigel Kukard.
2008-03-11 08:49:45 +00:00
Ulf Samuelsson
5381e1c486
revert bad U-Boot patch
2008-03-07 07:24:35 +00:00
Ulf Samuelsson
5d8956986f
Move defconfigs to board directory
2008-03-07 06:20:08 +00:00
John Voltz
06ce59d382
changed source download path to be uniform
2008-03-06 19:10:06 +00:00
John Voltz
0a48a6658f
added u-boot location
2008-03-06 19:00:38 +00:00
John Voltz
d6e0bcb950
added syslinux patch
2008-03-06 18:59:57 +00:00
John Voltz
ceaf9e8217
updates and additions for avr32 arch
2008-03-06 18:59:14 +00:00
John Voltz
c46893b7af
added support for kernel 2.6.24
2008-03-06 18:52:43 +00:00
Peter Korsgaard
4f375bc050
squashfs: bump version
2008-03-04 11:36:20 +00:00
Thomas Lundquist
9df5b80739
Closing #2374
2008-03-02 10:25:05 +00:00
"Steven J. Hill"
2d6b9b3a5e
Update diff version.
2008-02-22 19:37:39 +00:00
Thomas Lundquist
fcb27e9386
Upped version, the one here didn't exist any more. 3.61 compiled nicely (todo; check if nasm is installed on host?, syslinux needs it. Guess I copuld just add a target/host package.)
2008-02-18 22:10:05 +00:00
Hamish Moffatt
72a85109f3
Fix typos in jffs2 summary support
2008-02-12 05:50:26 +00:00
Hamish Moffatt
536e98effd
Add support for summarising JFFS2 images. With support in the kernel this improves mount time significantly.
2008-02-12 05:39:32 +00:00
Ivan Kuten
f31a746c2b
cloop target update, patch by Claus Klein
2008-01-16 09:25:07 +00:00
Ulf Samuelsson
57b4b70f3b
Update at91sam9261ek default config
2008-01-10 09:31:56 +00:00
Ulf Samuelsson
70e4f5c2d1
More debug info for linux
2008-01-10 09:31:15 +00:00
Ulf Samuelsson
e267955bba
Add /etc/ld.so.conf to Atmel based root fs
2008-01-10 09:27:25 +00:00
Ulf Samuelsson
7710ba7894
Update ATMEL_MIRROR and bump at91bootstrap to v2.4
2008-01-08 21:05:50 +00:00
Ulf Samuelsson
6d783f044b
Rmove old/duplicated AT91 linux patches
2008-01-08 21:03:12 +00:00
Thomas Lundquist
dc6a57bc69
Added BR2_DEBIAN_MIRROR
2007-12-27 12:00:12 +00:00
Ivan Kuten
27efe55e34
fix default GNU URL
2007-12-17 13:14:29 +00:00
Ivan Kuten
cb815ae003
Add support for GNU and kernel.org mirrors
2007-12-17 12:29:06 +00:00
Ivan Kuten
81cc4715b9
bump up syslinux version
2007-12-13 12:15:48 +00:00
Ulf Samuelsson
b4335d4438
Update defconfigs for AVR32 boards
2007-11-02 20:11:12 +00:00
Ulf Samuelsson
405a43d35a
Update at91rm9200, at91sam9261, at91sam9263 defconfigs
2007-11-02 15:25:59 +00:00
Ulf Samuelsson
0213ed8ee6
Update at91sam9260dfc defconfig
2007-11-02 15:18:25 +00:00
Ulf Samuelsson
1a9f9ed850
update NGW100 defconfig
2007-10-23 23:01:04 +00:00
Ulf Samuelsson
3536c2f919
Ensure AVR32 FPU config is always correct
2007-10-23 09:49:56 +00:00
Ulf Samuelsson
79db2c6989
Comment should depend on AT91 bootstrap beeing built
2007-10-21 20:13:40 +00:00
Ulf Samuelsson
d6c497011b
Disable AVR32 U-Boot until working
2007-10-21 20:09:22 +00:00
Ulf Samuelsson
b100732c6c
Use default linux kernel name
2007-10-18 12:37:36 +00:00
Ulf Samuelsson
8daa51407b
Add more info to linux status
2007-10-18 12:37:09 +00:00
Ulf Samuelsson
d84a9fc256
Fix syntax error in Makefile for Advanced Linux configuration
2007-10-18 11:58:47 +00:00
Ulf Samuelsson
60e3d6db20
Update JFFS2 page/erase size correctly
2007-10-17 22:01:58 +00:00
Ulf Samuelsson
8af5081bab
Use correct kernel name for advanced linux build
2007-10-13 23:07:04 +00:00
Ulf Samuelsson
815c3dfd1e
Move config item deeper into menu system
2007-10-13 18:37:24 +00:00
Ulf Samuelsson
453dca995e
Create Advanced Linux Configuration option/Remove experimental
2007-10-13 18:30:28 +00:00
Ulf Samuelsson
f53d9ece64
Update AVR32 toolchain with new binutils and uClibc, This time it works (cross-fingers)
2007-10-13 10:15:01 +00:00
Ulf Samuelsson
8ff3fc8831
Update AVR32 uClibc configuration
2007-10-12 15:18:27 +00:00
Ulf Samuelsson
7d70cc1e0c
Use correct uImage location for AVR32
2007-10-12 15:17:53 +00:00
Ulf Samuelsson
f15be25193
Add JFFS partition info for NGW100
2007-10-12 15:16:51 +00:00
Ulf Samuelsson
022b104152
Add 2.6.22.10 and 2.6.23 support
2007-10-12 15:10:27 +00:00
Ulf Samuelsson
103832204d
Update AVR32 to busybox-1.7.2
2007-10-12 14:30:47 +00:00
Ulf Samuelsson
4f413ed021
Update NGW100 skeleton
2007-10-12 12:34:04 +00:00
Ulf Samuelsson
b09a24d3d1
Update NWG100 skeleton
2007-10-12 12:32:59 +00:00
Bernhard Reutner-Fischer
5cfb2f794f
- fix some whitespace damage..
...
- add COPYTO settings for cpio and tar and remove that ugly hardcoded DATE from that was added by Ulf
2007-10-05 12:55:40 +00:00
Bernhard Reutner-Fischer
0c16c17f53
- start to think about GNU/hurd support.
...
Not yet functional. Help welcome
2007-10-05 11:06:56 +00:00
Bernhard Reutner-Fischer
fdcde6faed
- comment out apparently unused? cruft (linux-experimental)
2007-10-05 11:03:07 +00:00
Bernhard Reutner-Fischer
05195c3d00
- default to mips I for mipsel and mips III for mips
...
- suggest some target flags for abi64
2007-10-02 21:36:49 +00:00
Ulf Samuelsson
d40ad2d48b
Update AVR32 tools config
2007-10-01 21:21:07 +00:00
Ulf Samuelsson
ef88ede818
Update ATNGW100 defconfig
2007-10-01 21:16:33 +00:00
Bernhard Reutner-Fischer
14a71561a3
- just use the strip binary to avoid confusing libtool (quotes)
...
- use $(STRIPCMD) in packages to avoid clashes with $(STRIP)
2007-10-01 16:15:31 +00:00
Bernhard Reutner-Fischer
84f62146e7
- put a static grub into the staging dir
2007-09-30 18:06:32 +00:00
Bernhard Reutner-Fischer
ca340986fe
- fix typo
2007-09-30 12:42:11 +00:00
Bernhard Reutner-Fischer
98175bd43d
- revert part of 20119 (renaming BR2_ARM_.ABI to BR2_.ABI)
2007-09-29 21:22:23 +00:00
Ulf Samuelsson
663a893d27
Update nwg100 defconfig
2007-09-29 20:47:56 +00:00