Fix three issues with code style in our test infra:
- 'print' is now a function,
- exceptions need to be caught-assigned with the 'as' keyword,
- old-style "%s"%() formatting is deprecated.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
[Thomas: drop indices in format strings.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some test cases don't use a full build as setup, so split the build()
method into configure() and build().
It allows a test case to perform configuration at the setup stage and
the build inside the test itself.
Call this new method just before build in the BRTest base class, to keep
the current behavior for existing test cases.
This change will be needed when adding a common class to test the git
download infra.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@datacom.ind.br>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use an empty environment when calling make, but import PATH so the
buildroot tree under test can find binaries from the host machine.
Since environment variables are now ignored, move the handling of
BR2_DL_DIR to the defconfig to keep the current precedence of -d:
BR2_DL_DIR | -d DIR | test downloads | BR downloads
------------+----------+------------------+--------------
unset | unset | [error] | [error]
unset | set | in $(DIR) | in $(DIR)
set | unset | in $(BR2_DL_DIR) | in $(BR2_DL_DIR)
set | set | in $(DIR) | in $(DIR)
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With the hard disk crash of autobuild.b.o, we lost old toolchains, so
use the latest toolchains, which have been restored.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix the trivial warnings from flake8:
- remove modules imported but unused;
- use 2 lines before class or module level method;
- remove blank line at end of file.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Change all defconfig fragments to take advantage of
"cf3cd4388a support/tests: allow properly indented config fragment".
Make each defconfig fragment:
- start after a backslash;
- be declared as a multi-line string literal;
- be indented one level more than the variable that contains it.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Move the strip out of leading spaces in defconfig fragments from the
BRTest class to the Builder class. It actually postpones the strip out,
consequentially allowing test cases to post-process the defconfig in
their own __init__ before calling the __init__ method from BRTest.
Moving this code to the Builder class also allows any new test class
that inherits from BRTest to reuse the same code even if the new class
overrides the setUp method.
At same time, prepend a newline to the jlevel handling otherwise it
would stop working for defconfig fragments that don't end in a newline.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add a parameter to run-tests to act as a multiplier for all timeouts of
emulator.
It can be used to avoid sporadic failures on slow host machines as well
in elastic runners on the cloud.
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
[Arnout: rename multiplier to timeout_multiplier everywhere]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The default audio backend for qemu is configured at compile time. It
generates annoying warning messages to qemu's stderr when running our
tests, like these:
pulseaudio: set_sink_input_volume() failed
pulseaudio: Reason: Invalid argument
pulseaudio: set_sink_input_mute() failed
pulseaudio: Reason: Invalid argument
Explicitly set the audio backend to "none" at runtime to remove those
messages from our logs. There is no command line argument for this, so
use an environment variable when starting qemu.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As suggested by Arnout in [1].
While at it, simplify the logic by always appending the BR2_JLEVEL and
defaulting to 0 (the value copied from Config.in is used for 5 years now
and is very unlikely to change).
[1] http://patchwork.ozlabs.org/patch/790525/
Suggested-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since commit cf3cd4388a the -j option is
silently ignored.
The configuration lines are processed using '\n'.join().
This function adds intervening occurrences of the separator, but the
resulting string does not end at a separator.
>>> "n".join(["a","b"])
'anb'
It results in a defconfig that does not end in a newline.
When BR2_JLEVEL is added by -j logic to the defconfig it ends up
concatenated to the last line of the defconfig.
BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM=yBR2_JLEVEL=7
The resulting .config has the default BR2_JLEVEL=0.
Instead of just workaround this problem by adding a newline before
BR2_JLEVEL when -j is used, make the defconfig to end in a newline since
it is a more future-proof solution.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The defconfig is composed on-the-fly by test infra + tests.
Dump it to the logfile before running 'make olddefconfig' so it can
easily analysed when debugging.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some commands take more than 5 seconds to complete under QEMU, so add
provisions to allow individual unit-test to specify different duration
to avoid false negative test failures.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Tested-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, defining a config fragment in the runtime test infra requires
that the fragment not to be indented. This is beark, and causes grievance
when looking at the code (e.g. to fix it).
Just strip out all leading spaces/tabs when writing the configuration
lines into the config file, allowing in-line indented config fragments,
like so:
class TestFoo(bla):
config = bla.config + \
"""
FOO=y
# BAR is not set
"""
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In commit b78b50465c, the initialisation
of BRTest.builddir was moved to the __init__ function. However, it is
set based on BRTest.outputdir and that is only set when the -o argument
is given to run-tests. When called as "run-tests -l", there is no -o
argument so BRTest.outputdir remains unset.
To fix, keep BRTest.builddir at None when BRTest.outputdir is None.
While we're at it, drop the direct access to the class member. If a
subclass wishes to set outputdir to something else before calling
BRTest.__init__, they are free to do so.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reported-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
BRTest's setUp() method contains a few assignments that initialize its
member variables. Since we will want to use these in test case
overrides, move them to the __init__ function.
Also allow the config member to be overridden, rather than always
taking the class member.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When running multiple instances of emulator in parallel, the login
prompt can take some time to appear.
Use a large timeout when waiting for the prompt to avoid random
failures.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Let the user to override the default BR2_JLEVEL used for each testcase.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove unused import.
Use 2 empty lines before a class.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When using pexpect there is no need for a helper function. Just use
expect() directly everywhere.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When using pexpect there is no need for a helper function. Just use
sendline() directly everywhere.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When the parameter logfile is passed to spawn(), pexpect sends both
stdin and stdout to the logfile and it creates a double echo effect.
One way to avoid the double echo in the logfile would be to disable the
echo on the terminal just after login ("stty -echo"), but double echo of
user and password would remain.
Instead of that, send only the stdout to the logfile using the
logfile_read property.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of redirecting qemu serial to telnet, redirect it to stdio.
It allows to run testcases in parallel without random failing caused by
two emulators trying to use the same telnet port (1234).
'qemu -serial stdio' returns some extra <CR> characters, so remove them
from the log.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Replace subprocess + telnetlib with pexpect.
Use the telnet installed on the host machine instead of telnetlib, while
the serial from qemu is not yet redirected to stdio.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We currently call infra.smart_open() to open log files each time we
need to write to them.
Opening the file once in the constructor of Builder and Emulator and
writing to it whenever needed is simpler and slightly more efficient.
Remove smart_open and instead create a new open_log_file() function
which just opens the logfile. Also let it compute the filename, in
order to simplify even further the Builder and Emulator code.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently messages from run-tests are quite unpleasant:
[br-tests/TestPostScripts/2017-05-09 15:51:57] Building
[br-tests/TestPostScripts/2017-05-09 15:52:23] Building done
[br-tests/TestPostScripts/2017-05-09 15:52:23] Cleaning up
.[br-tests/TestNoTimezone/2017-05-09 15:52:23] Starting
[br-tests/TestNoTimezone/2017-05-09 15:52:23] Building
[br-tests/TestNoTimezone/2017-05-09 15:53:17] Building done
[br-tests/TestNoTimezone/2017-05-09 15:53:22] Cleaning up
.[br-tests/TestGlibcNonDefaultLimitedTimezone/2017-05-09 15:53:22] Starting
[br-tests/TestGlibcNonDefaultLimitedTimezone/2017-05-09 15:53:22] Building
[br-tests/TestGlibcNonDefaultLimitedTimezone/2017-05-09 15:54:33] Building done
[br-tests/TestGlibcNonDefaultLimitedTimezone/2017-05-09 15:54:37] Cleaning up
[...]
Change them in a more readable way by removing the date and using a
columnar style:
15:12:22 TestPostScripts Starting
15:12:25 TestPostScripts Building
15:12:48 TestPostScripts Building done
15:12:48 TestPostScripts Cleaning up
.15:12:48 TestNoTimezone Starting
15:12:54 TestNoTimezone Building
15:13:44 TestNoTimezone Building done
15:13:49 TestNoTimezone Cleaning up
.15:13:49 TestGlibcNonDefaultLimitedTimezone Starting
15:14:00 TestGlibcNonDefaultLimitedTimezone Building
15:14:56 TestGlibcNonDefaultLimitedTimezone Building done
15:15:01 TestGlibcNonDefaultLimitedTimezone Cleaning up
[...]
Note the '.' and other characters presented by nose2 are still
printed. They are not affected by this change.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds the core of a new testing infrastructure that allows to
perform runtime testing of Buildroot generated systems. This
infrastructure uses the Python unittest logic as its foundation.
This core infrastructure commit includes the following aspects:
- A base test class, called BRTest, defined in
support/testing/infra/basetest.py. This base test class inherited
from the Python provided unittest.TestCase, and must be subclassed by
all Buildroot test cases.
Its main purpose is to provide the Python unittest setUp() and
tearDown() methods. In our case, setUp() takes care of building the
Buildroot system described in the test case, and instantiate the
Emulator object in case runtime testing is needed. The tearDown()
method simply cleans things up (stop the emulator, remove the output
directory).
- A Builder class, defined in support/testing/infra/builder.py, simply
responsible for building the Buildroot system in each test case.
- An Emulator class, defined in support/testing/infra/emulator.py,
responsible for running the generated system under Qemu, allowing
each test case to run arbitrary commands inside the emulated system.
- A run-tests script, which is the entry point to start the tests.
Even though I wrote the original version of this small infrastructure, a
huge amount of rework and improvement has been done by Maxime
Hadjinlian, and squashed into this patch. So many thanks to Maxime for
cleaning up and improving my Python code!
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
