[Peter: adjust for _FEX_FILE]
Signed-off-by: Carlo Caione <carlo.caione@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The at91bootstrap build sometimes fail when doing parallel builds.
Build it without parallel build.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Turned out that setting a nil-UUID is no better than clearing it.
What currently happens is as follows:
- first, genext2fs does not generate a UUID
- then we tune2fs to upgrade the filesystem
- then we run fsck, which generates a random UUID
- then we re-run tune2fs to set a nil-UUID
So, on the target, if the file system is improperly unmounted (eg.
with a power failure), on next boot, fsck may be run, and a new
random UUID will be generated.
*However*, fsck improperly updates the filesystem when it adds the
UUID, and there are a few group descriptor checksum errors.
Those errors will go undetected until the next fsck, which will then
block for user input (bad on embedded systems, bad).
Fix that by systematically generating a random UUID _before_ we call
to fsck.
A random UUID is not so bad, after all, since there are already so
many sources of unpredictability in the filesystem: files date and
ordering, files content (date, paths...) which renders a fixed UUID
unneeded.
And it is still possible to set the UUID in a post-image script if
needed, anyway.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: depend on arm, wrap help, change to _FEX_FILE option, error on empty]
Signed-off-by: Carlo Caione <carlo.caione@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of doing some nasty SED tricks, use a patch that modifies the
bzip2 build system to make it a little bit nicer. Those SEDs were made
differently for the host and target packages, which is contrary to the
logic of not having any difference in the source tree between the host
build and the target build.
This commit also makes sure that bzip2.mk behaves properly in a
BR2_PREFER_STATIC_LIB=y context.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When a Xtensa specific patch needs to be applied, it should be applied
both when doing the target and the host build.
This change is part of the effort to remove the differences between
host and target post-extract and post-patch hooks, that are
problematic for the out-of-tree support.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The gcc14 machine has a moderately old host gcc, which was causing a
recurrent build failure of host-lttng-babeltrace:
http://autobuild.buildroot.org/results/492/49216052c161874f41738e41e6e0c89a6dd04000/build-end.log
This commit adds a patch to fix this build failure, related to the
access of the ULLONG_MAX define on compilers that did not default to
the C99 variant of the C language.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The attr-0001-attr-Fix-static-build-installation.patch has been integrated
in the new upstream version.
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since fe6a9e5e9d (flex: needs M4 at runtime), the autobuilders have
been producing a number of flex related build failures. They have been
hard to track down, because even on the same machine, with the same
Git commit ID and the same configuration, the failure could not be
reproduced.
However, a close inspection of flex's config.log file allowed to find
out what the problem was. In its configure script, flex uses the
host-flex to generate a minimal example, and find out the name of the
output file of flex.
When the M4 environment is passed when building the target flex, it
also affects the *execution* of the host-flex, which tries to use
/usr/bin/m4 (which doesn't exist in the autobuilder machines) instead
of the one built in $(HOST_DIR)/usr/bin/m4. So generating the minimal
example fails. And this is where what I could reproduce and what the
autobuilders script produce differ: in my case, even though host-flex
fails to run, it creates an empty lex.yy.c, which is enough to make
the configure script happy. In the context of the autobuild scripts,
this file is apparently not created at all, for an unknown reason, and
this leads to the configure script to abort.
The fix is to set ac_cv_path_M4. This will affect the default m4 used
by the target flex, but it will not affect the m4 used by the
host-flex. It allows the test made during the configure script to work
properly, and therefore should fix the issue seen in the autobuilders.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
"tune2fs -U clear" creates an invalid filesystem, that fsck.ext2
whines about later:
$ make rootfs-ext2
[--SNIP--]
$ ./host/usr/sbin/fsck.ext4 images/rootfs.ext2
e2fsck 1.42.7 (21-Jan-2013)
Filesystem did not have a UUID; generating one.
images/rootfs.ext2: clean, 4616/5120 files, 53171/131072 blocks
$ ./host/usr/sbin/fsck.ext4 -f images/rootfs.ext2
e2fsck 1.42.7 (21-Jan-2013)
One or more block group descriptor checksums are invalid. Fix<y>? yes
Group descriptor 0 checksum is 0x4131, should be 0x8bdb. FIXED.
[--SNIP--]
So we set an explicitly NULL UUID instead.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: Fix Config.in wordwrap and trailing lines]
Signed-off-by: Carlo Caione <carlo.caione@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
For proper runtime execution, flex requires m4 to be
installed. Passing a M4 variable at configure time is needed,
otherwise flex on the target will try to use a 'm4' binary with a
build machine path.
Fixes bug #4988.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
ADI officially supports the buildroot and related GNU toolchain for
Blackfin since ADI's 2012R1 release only. In order to avoid confusion,
it is better to remove the 2011R1 GNU toolchain for Blackfin. In
addition, the 2011R1 GNU toolchain for Blackfin doesn't support the
BF60x processors.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When thread support is disabled, the libitm and libatomic libraries
from gcc should be disabled, otherwise, the build of gcc fails.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
For a reason that's fairly unclear to me, Peter added a '-lz' link
flag to the elf2flt.mk build in d5664ee99 ("elf2flt: fix link").
However, the zlib library may not necessarily be installed on the host
machine, so we should depend on host-zlib, and pass the appropriate
LDFLAGS. This is what this patch does.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Enclose all dropbear sub-options into a 'if BR2_PACKAGE_DROPBEAR'
... 'endif' block rather than having 'depends on BR2_PACKAGE_DROPBEAR'
for each option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Thomas: updated to 2.0.8, restricted to supported architectures,
added licensing informations, updated to latest Buildroot package
infrastructure]
[Peter: Fix LICENSE_FILES typo, needs largefile support in toolchain]
Signed-off-by: Will Newton <will.newton@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We ran into a "Login incorrect" problem when running the same rootfs
image across platforms with different loging ports ttyS0/1/2/3.
Simply assignning "console" to BR2_TARGET_GENERIC_GETTY_PORT, which in
turn modifies the /etc/inittab, is not enough because the "console" device
was missing in the /etc/securetty.
While current securetty has enumerated a lot of ttys, this patch should save
some efforts to enumerate more.
[Peter: guard with single quotes]
Signed-off-by: Tzu-Jung Lee <tjlee@ambarella.com>
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
A couple of patches make use of XXX_POST_UNINSTALL_TARGET_HOOKS, which
is not a hook set that Buildroot actually supports.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch fixes the build on AArch64 (and potentially others).
The patch has been submitted upstream.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
