We need ":0.0 vt01" to make sure Xorg finds the correct terminal.
Quoting https://www.x.org/archive/X11R6.8.0/doc/Xorg.1.html
-allowMouseOpenFail
Allow the server to start up even if the mouse device can't be
opened or initialised.
We need this option in case BR2_PACKAGE_XDRIVER_XF86_INPUT_MOUSE was
not enabled.
-noreset
prevents a server reset when the last client connection is closed.
We need this option to prevent auto-close of Xorg.
Tested with a qemu image and Kodi.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Arnout: copy an abbreviate version of the explanation above to the
script.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Currently, when a filename contains characters not representable in the
user's locale, we fail hard, especially when the host python is python3.
This is because python2 and python3 handle encoding/decoding strings
differently, with python3 presumable doing the right thing, but it
breaks on some systems, while python2 presumable does the wrong thing,
but it works everywhere. (Just joking, obviously...)
Part of the issue being that the csv reader in python2 is broken with
UTF8.
We fix the issue by ditching the csv reader, and simply read the file in
binary mode, manually partitioning the lines on the first comma.
Then, we use the binary-encoded (really, un-encoded) package names and
filenames as values and keys, respectively.
Finally, for each filename or package we need to print, we try to decode
them with the defaults for the user settings, but catch any decoding
exception and fall back to dumping the raw, binary values. Which codec
is used by default differs between Python version, but in all cases
something sane is printed at least.
Thanks a lot to Arnout for the live help doing this patch. :-)
Reported-by: Jaap Crezee <jaap@jcz.nl>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Jaap Crezee <jaap@jcz.nl>
[Arnout: commit log improvement]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Up to now, Raspberry Pi Zero W (rpi0w) could be built with the normal
raspberrypi0_defconfig. However, then you don't have support for the
Bluetooth out-of-the-box, which makes using a W a bit pointless.
Therefore, create a separate defconfig for the W. It is a copy of
raspberrypi0_defconfig with the following changes:
- Add DT overlays (from rpi-firmware) to support Bluetooth.
- Pass --add-pi3-miniuart-bt-overlay to post-image.sh.
Since there is now a separate raspberrypi0w_defconfig, the W support
can be removed from raspberrypi0_defconfig.
Signed-off-by: Yves Deweerdt <yves.deweerdt.linux@gmail.com>
[Arnout:
- Bump to same kernel version as raspberrypi0.
- Remove redundant comment.
- Remove redundant default BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTB_OVERLAYS=y.
- Improve commit log.
- Refresh .gitlab-ci.yml.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Commit 4cd1ab158 (core: alternate solution to disable C++) made use of a
non-existent 'no' binary when C++ is not available in the toolchain.
However, some packages, like jimtcl as bundled in opeocd, really want to
find the binary that $CXX contains.
Revert openocd to use 'false' instead of 'no'.
Fixes:
http://autobuild.buildroot.org/results/cbd/cbd5ab97fb0659968ff628461130627cf1745955/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 4cd1ab158 (core: alternate solution to disable C++) made use of a
non-existent 'no' binary when C++ is not available in the toolchain.
However, some packages, like jimtcl, really want to find the binary that
$CXX contains.
Revert jimtcl to use 'false' instead of 'no'.
Fixes:
http://autobuild.buildroot.org/results/54f/54f3df03551fbdf293d33dc1e3f08005faa15321/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit c868095681 ("toolchain: fix
detection of SSP support") fixed the SSP check so that it does the
correct thing for nios2 toolchains. While this commit fixed the
description of the Sourcery NIOSII toolchain, it didn't fix the
description for the autobuilders of the br-nios2-glibc toolchain,
causing some build failures. This commit adjusts br-nios2-glibc.config
to indicate that the toolchain doesn't have SSP support.
Fixes:
http://autobuild.buildroot.net/results/6c44e328b7bffd8474d29d5bdf1ea109ec15f4ad/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since version 0.28 ncmpc only supports the meson build.
Therefore, adapt to package infrastructure according to the user manual.
Add a hash for the license file.
Add a nmpc entry for myself in DEVELOPERS
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
zstd is dual licensed under BSD-3-Clause or GPL-2.0 as per README.md
and source files license header.
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit ea9669fffa ("core: kill
DEPENDENCIES_HOST_PREREQ"), the core-dependencies make target was
removed, and is now named just "dependencies".
This broke the utils/genrandconfig script, and this commit intends to
fix that.
Since this script is part of the Buildroot tree, it is provided
together with Buildroot, so we don't need to support the legacy
core-dependencies target. Someone checking out an older Buildroot will
have a working setup, with support/dependencies exposing
core-dependencies and utils/genrandconfig using core-dependencies. The
only broken situation will be between
ea9669fffa and this commit, but that's
not a sufficient reason to add some backward compatibility code.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As per COPYING file, opusinfo is licensed under GPL version 2.
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some packages that use libtool really need some love to be able to
disable C++ support.
This is because libtool will want to call AC_PROG_CXXCPP as soon as CXX
is set non-empty to something different from 'no'. Then, AC_PROG_CXXCPP
will want a C++ preprocessor that works on valid input *and* fail on
invalid input.
So, providing 'false' as the C++ compiler will then require that we do
have a working C++ preprocessor. Which is totally counter-productive
since we do not have a C++ compiler to start with...
bd39d11d2e (core/infra: fix build on toolchain without C++) was a
previous attempt at fixing this, by using the host's C++ preprocessor.
However, that is very incorrect (that's my code, I can say so!) because
the set of defines will most probably be different for the host and the
target, thus causing all sorts of trouble. For example, on ARM we'd have
to include different headers for soft-float vs hard-float, which is
decided based on a macro, which is not defined for x86, and thus may
redirect to the wrong (and missing) header.
Instead, we notice that libtool uses the magic value 'no' to decide that
a C++ compiler is not available, in which case it skips the call to
AC_PROG_CXXCPP.
Given that 'no' is not provided by any package in Debian and
derivatives, as well as in Fedora, we can assume that no system will
have an executable called 'no'. Hence, we use that as a magic value to
disable C++ detection altogether.
Fixes: #10846 (again)
Reported-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Damien Riegel <damien.riegel@savoirfairelinux.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop 0003-tar-unzip-postpone-creation-of-symlinks-with-suspici.patch now upstream.
>From the release notes:
Bug fix release. 1.28.2 has fixes for tcpsvd (fixed fallout from
opt_complementary removal), udhcpd (do not ignore SIGTERM), tar and unzip
(reverted to previous, more permissive symlink handling), ssl_client (fixed
option parsing).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump at91sam9x5ek, atmel_sama5d27_som1_ek, atmel_sama5d2_xplained,
atmel_sama5d3_xplained, and atmel_sama5d4_xplained all variants to
linux4sam_5.8. The 3 foundation components have their tags changed
(AT91Bootstrap, U-Boot, Linux kernel).
at91bootstrap 3.8.10 is required to support gcc7.
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
Constructed ASN.1 types with a recursive definition could exceed the stack
(CVE-2018-0739)
Constructed ASN.1 types with a recursive definition (such as can be found in
PKCS7) could eventually exceed the stack given malicious input with
excessive recursion. This could result in a Denial Of Service attack.
There are no such structures used within SSL/TLS that come from untrusted
sources so this is considered safe.
Incorrect CRYPTO_memcmp on HP-UX PA-RISC (CVE-2018-0733)
Because of an implementation bug the PA-RISC CRYPTO_memcmp function is
effectively reduced to only comparing the least significant bit of each
byte. This allows an attacker to forge messages that would be considered as
authenticated in an amount of tries lower than that guaranteed by the
security claims of the scheme. The module can only be compiled by the HP-UX
assembler, so that only HP-UX PA-RISC targets are affected.
rsaz_1024_mul_avx2 overflow bug on x86_64 (CVE-2017-3738)
This issue has been reported in a previous OpenSSL security advisory and a
fix was provided for OpenSSL 1.0.2. Due to the low severity no fix was
released at that time for OpenSSL 1.1.0. The fix is now available in
OpenSSL 1.1.0h.
There is an overflow bug in the AVX2 Montgomery multiplication procedure
used in exponentiation with 1024-bit moduli. No EC algorithms are affected.
Analysis suggests that attacks against RSA and DSA as a result of this
defect would be very difficult to perform and are not believed likely.
Attacks against DH1024 are considered just feasible, because most of the
work necessary to deduce information about a private key may be performed
offline. The amount of resources required for such an attack would be
significant. However, for an attack on TLS to be meaningful, the server
would have to share the DH1024 private key among multiple clients, which is
no longer an option since CVE-2016-0701.
This only affects processors that support the AVX2 but not ADX extensions
like Intel Haswell (4th generation).
For more details, see https://www.openssl.org/news/secadv/20180327.txt
The copyright year changed in LICENSE, so adjust the hash to match.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
From the release notes (https://lwn.net/Articles/750103/):
E2fsprogs 1.44.0 introduced a regression introduced which caused e2fsck
to fail to support HTree directories on big-endian systems. Fix how we
read block numbers for internal htree nodes.
Removed a potential memory leak from fsck.
E2image now correctly creates e2image files for bigalloc file systems.
Dumpe2fs and debugfs now correctly support e2image files for file
systems that have the meta_bg option enabled.
E2fsck and debugfs now correctly handle delete inodes (including
processing the orphaned inode list in the case of e2fsck) for bigalloc
file systems. (Addresses Google Bug: #73795618)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/f1c6494133806b9fc26ae3ce9e9c6a22fa2eda6f/
Commit 6205b75873 (sngrep: gnutls support also needs libgcrypt) ensured
that --with-gnutls is only used when both gnutls and libgcrypt are enabled,
but it didn't ensure libgcrypt gets built before sngrep or told the
configure script where to find libgcrypt-config, breaking the build.
Fix both issues.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Enable static build. gawk builds statically just fine. The shared
library check has been removed in 4.1.1.
Remove the symlink force hunk from the no-versioned patch. The only user
of LN is in the part that this patch disables.
Add license file hash.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix seed variable name for the wait3 system call AC_TRY_RUN test.
Remove manual installation; not needed anymore.
Cc: Will Newton <will.newton@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
CVE-2017-12627: dereference of a NULL pointer while processing the path
to the DTD.
xerces 3.2.1 includes this patch. But this version also added
AC_RUN_IFELSE to its configure script, making cross compilation harder.
Switching to cmake is also problematic since the minimum required cmake
version is 3.2.0. The host dependencies check currently allows minimum
cmake version 3.1.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
lshw is seldomly released, so its data files become easily
outdated. Instead, this commit makes use of the data files provided by
hwdata. This is easily possible because lshw looks for the files in
several directories, including /usr/share/hwdata, where the hwdata
collection is installed.
We remove the entire /usr/share/lshw directory, where the not very
up-to-date data files where installed. Four files were installed
there: pci.ids, usb.ids (which are now provided by hwdata), manuf.txt
and oui.txt (which are not used at run time).
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
[Thomas:
- rework commit log
- replace patch by a simple removal of the /usr/share/lshw directory
- add "runtime" comment in Config.in for the BR2_PACKAGE_LSHW
dependency]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Chris Lesiak <chris.lesiak@licor.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since D-Bus 1.9.18, the recommended location for the system and
session busses configuration files is /usr/share instead of /etc. From
the D-Bus NEWS file:
D-Bus 1.9.18 (2015-07-21)
==
The “Pirate Elite” release.
Configuration changes:
• The basic setup for the well-known system and session buses is now done
in read-only files in ${datadir}, moving a step closer to systems
that can operate with an empty /etc directory. In increasing order
of precedence:
· ${datadir}/dbus-1/s*.conf now perform the basic setup such as setting
the default message policies.
· ${sysconfdir}/dbus-1/s*.conf are now optional. By default
dbus still installs a trivial version of each, for documentation
purposes; putting configuration directives in these files is
deprecated.
· ${datadir}/dbus-1/s*.d/ are now available for third-party software
to install "drop-in" configuration snippets (any packages
using those directories should explicitly depend on at least this
version of dbus).
· ${sysconfdir}/dbus-1/s*.d/ are also still available for sysadmins
or third-party software to install "drop-in" configuration snippets
· ${sysconfdir}/dbus-1/s*-local.conf are still available for sysadmins'
overrides
${datadir} is normally /usr/share, ${sysconfdir} is normally /etc,
and "s*" refers to either system or session as appropriate.
Therefore, this commit adjusts the Avahi package to install the D-Bus
related files to /usr/share/dbus-1/system.d.
Signed-off-by: Chris Lesiak <chris.lesiak@licor.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The uCLS1012A-SOM product family (ucls1012a) is an Arcturus Networks Inc.
64bit ARM Cortex-A53 class System on Module powered by a NXP QorIQ LS1012A
Low Power Communication Processor. This 314 pin MXM3.0/SMARC module card
contains DDR3, QSPI NOR Flash, eMMC NAND Flash, optional Audio CODEC and is
available with 1 or 2 Gig-Ethernet PHYs.
Signed-off-by: Oleksandr Zhadan <oleks@arcturusnetworks.com>
Signed-off-by: Michael Durrant <mdurrant@arcturusnetworks.com>
Changes v1 -> v2:
- updated kernel and u-boot source repositories to github
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This variable, like BR2_DL_DIR, is designed to be overridable from the
environment. Unlike BR2_DL_DIR, it is not documented as such in the
Config.in help text. Do so now.
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 361d1b969e defines FIRMWARE_DIR for
bluez5_utils. The compatibility symlink for the firmware is no longer
needed.
Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
-Ofast (introduced in GCC 4.6) It combines the existing optimization level -O3
with options that can affect standards compliance but result in better optimized
code. For example, -Ofast enables -ffast-math.
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
