The Linux kernel doesn't even support i386 anymore, there is no NPTL
support for i386 and uClibc-ng only supports NPTL on x86, so there is
essentially no usable thread implementation. Most likely glibc and
musl also don't support i386 either. So it's time to remove the
support for this architecture variant.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The previous incarnation was incomplete, it only applied one of the
Gentoo patches, hence it had corner cases.
Apply all 4 patches as pointed out by Mike on the mailing list.
Signed-off-by: Gustavo Zacarias <gustavo.zacarias@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2015-3193 - BN_mod_exp may produce incorrect results on x86_64
CVE-2015-3194 - Certificate verify crash with missing PSS parameter
CVE-2015-3195 - X509_ATTRIBUTE memory leak
Enable IDEA as well since otherwise the build breaks (always great
upstream) - it's no longer patent encumbered.
[Peter: correct sha256]
Signed-off-by: Gustavo Zacarias <gustavo.zacarias@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch from : to # since CFLAGS can include :'s spilled in from
BR2_TARGET_OPTIMIZATION, for example:
BR2_TARGET_OPTIMIZATION="-Wl,-rpath,/lib:/usr/lib" would cause the sed
expression to fail thus breaking the build.
Changed all of the SEDs to # for consistency.
Signed-off-by: Gustavo Zacarias <gustavo.zacarias@free-electrons.com>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is a patch that is originally based on a patch Thomas P.
submitted for an earlier version of this package. I have adopted this
patch to use the latest available Gentoo parallel patch. I have also
seen about a minute improvement on my build times of openssl.
Part of Thomas P's original message:
On my build server, the current build of OpenSSL takes 1 minutes and
20 seconds. With this commit applied, enabling parallel build and
installation, the build only takes 28 seconds.
All the patches are downloaded from Gentoo.
There is apparently some interest in upstream OpenSSL to enable
parallel build, see for example commit
c3f22253b1. This
commit is not part of any OpenSSL release, but we can hope that the
problem will resolved in the future.
Signed-off-by: Ryan Barnett <ryanbarnett3@gmail.com>
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CC: Gustavo Zacarias <gustavo@zacarias.com.ar>
CC: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Using Git formatted patches makes it easier to adjust the patches when
needed.
[Thomas: remove patch numbering.]
Signed-off-by: Ryan Barnett <ryanbarnett3@gmail.com>
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CC: Gustavo Zacarias <gustavo@zacarias.com.ar>
CC: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The dependency doesn't make sense now that the option only controls if the
built binary gets installed into the target or not, so drop it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If configured with no-dso, the openssl binary still gets linked with
-ldl, while libdl is not available for static-only builds. The OpenSSL
framework does not support automatically dropping -ldl with no-dso, so
-ldl has to be removed from Makefile after calling ./Configure as
explained in PROBLEMS.
Fixes http://autobuild.buildroot.org/results/cbb35f2582f1cfeb3d11cb4952a80784ff660baf
[Peter: add reference to PROBLEMS file]
Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that building the openssl binary without MMU is supported, the only
reason left for not building apps if the openssl binary is disabled is
to save build time. Moreover, the commit
720893b625 "openssl: disable apps for
NOMMU", which added this behavior, had a side effect: the scripts from
apps (CA.pl, CA.sh and tsget) and the default configuration file
(openssl.cnf) were no longer installed, which is not advertized by the
BR2_PACKAGE_OPENSSL_BIN option. CA.pl and CA.sh use the openssl binary,
so not installing them without the latter makes sense. But tsget does
not use the openssl binary, and openssl.cnf can be used by libcrypto, so
it is preferable to handle BR2_PACKAGE_OPENSSL_BIN like before the
commit mentioned above, i.e. to always build and install apps and to
just remove the openssl binary afterwards if needed.
This is what the current commit does, but installing only the helper
scripts having their dependencies (perl or the openssl binary)
satisfied. The help text is updated accordingly.
Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The commit 720893b625 "openssl: disable
apps for NOMMU" prevented the openssl binary from being built without
MMU in order to fix a build failure without fork(). However, openssl is
designed to support the lack of fork() with -DHAVE_FORK=0, so allow the
openssl binary to be enabled without MMU thanks to this option.
Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes HMAC ABI breakage from 1.0.2b
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes
/home/br/br3/output/host/usr/lib/gcc/i586-buildroot-linux-uclibc/4.8.4/../../../../i586-buildroot-linux-uclibc/bin/ld: cannot find -ldl
using this defconfig
BR2_STATIC_LIBS=y
BR2_PACKAGE_OPENSSL=y
BR2_PACKAGE_OPENSSL_BIN=y
Quoting PROBLEMS:
"We don't have framework to associate -ldl with no-dso, therefore the only
way is to edit Makefile right after ./config no-dso and remove -ldl from
EX_LIBS line."
To not make the build procedure more complicated disable static building of
bin/openssl.
[Thomas: add corresponding kconfig comment.]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit doesn't touch infra packages.
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The adaptation from commit 74dd54bf is incomplete/bad causing segfaults when
using cryptodev for digest offload, examples: openssh, openssl speed, others.
Tested on real hardware (talitos).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The new c_rehash from openssl 1.0.2 can't take a minus in the directory
string since the regex for matching commands checks for - in any
position instead of just the beginning to trigger the command parser. Fixes:
http://autobuild.buildroot.net/results/ee6/ee683569350d5deaf0ccc603ed7066bffb83cbe3/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Bump version to 1.0.2
- Adapt patches to new version
- Update hash value
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since a while, the semantic of BR2_PREFER_STATIC_LIB has been changed
from "prefer static libraries when possible" to "use only static
libraries". The former semantic didn't make much sense, since the user
had absolutely no control/idea of which package would use static
libraries, and which packages would not. Therefore, for quite some
time, we have been starting to enforce that BR2_PREFER_STATIC_LIB
should really build everything with static libraries.
As a consequence, this patch renames BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS, and adjust the Config.in option accordingly.
This also helps preparing the addition of other options to select
shared, shared+static or just static.
Note that we have verified that this commit can be reproduced by
simply doing a global rename of BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS plus adding BR2_PREFER_STATIC_LIB to Config.in.legacy.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
See http://rt.openssl.org/Ticket/Display.html?id=2770&user=guest&pass=guest
This has been sitting for ages in the openssl tracker and it's verified
to cause issues.
The patch only touches cryptodev engine offloading so it's pretty safe.
Tested on CAAM SEC4 hardware.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2014-0224, CVE-2014-0221, CVE-2014-0195, CVE-2014-0198 among others.
See https://www.openssl.org/news/secadv_20140605.txt for details.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This enables powerpc64 and powerpc64le. Currently, le needs at least
glibc 2.19 and gcc 4.9.0. For gdb, 7.7.1 works (added in an earlier
patch).
[Peter: also disallow gcc 4.8 for ppc64le]
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
openssl 1.0.1f Makefile.org doesn't quote $(CC) when passing the
parameter in another invocation of make, hence breaking when the
compiler string contains a space with multiple strings (for example with
ccache).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In the Config.in file of package foo, it often happens that there are other
symbols besides BR2_PACKAGE_FOO. Typically, these symbols only make sense
when foo itself is enabled. There are two ways to express this: with
depends on BR2_PACKAGE_FOO
in each extra symbol, or with
if BR2_PACKAGE_FOO
...
endif
around the entire set of extra symbols.
The if/endif approach avoids the repetition of 'depends on' statements on
multiple symbols, so this is clearly preferred. But even when there is only
one extra symbol, if/endif is a more logical choice:
- it is future-proof for when extra symbols are added
- it allows to have just one strategy instead of two (less confusion)
This patch modifies the Config.in files accordingly.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, openssl defines three conditional hooks, but two do not
follow our coding rules:
- for PRE_CONFIGURE, the hook is defined in the if-block, but
the _HOOK variable is always set
- for POST_INSTALL_TARGET, the hook is always defined, but the
_HOOK variable is set in the if-block
Fix that:
- define the hook in the if-block
- assign the _HOOK variable in the if-block
At the same time, get rid of extra empty lines that make it more
difficult to read.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gets rid of a large number of warnings (and suboptimal code?):
..sysroot/usr/include/features.h:209:5: warning: #warning requested
reentrant code, but thread support was disabled [-Wcpp]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This finally removes the BR2_HAVE_DEVFILES option, that was used to
install/keep development files on target. With the recent migration of
the internal backend to the package infrastructure, we had anyway lost
the ability to build gcc for the target, and install the uClibc
development files on the target.
[Peter: also remove support/scripts/copy.sh]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
