This commit implements the core of the move to per-package SDK and
target directories. The main idea is that instead of having a global
output/host and output/target in which all packages install files, we
switch to per-package host and target directories, that only contain
their explicit dependencies.
There are two main benefits:
- Packages will now see only the dependencies they explicitly list in
their <pkg>_DEPENDENCIES variable, and the recursive dependencies
thereof.
- We can support top-level parallel build properly, because a package
only "sees" its own host directory and target directory, isolated
from the build of other packages that can happen in parallel.
It works as follows:
- A new output/per-package/ directory is created, which will contain
one sub-directory per package, and inside it, a "host" directory
and a "target" directory:
output/per-package/busybox/target
output/per-package/busybox/host
output/per-package/host-fakeroot/target
output/per-package/host-fakeroot/host
This output/per-package/ directory is PER_PACKAGE_DIR.
- The global TARGET_DIR and HOST_DIR variable now automatically point
to the per-package directory when PKG is defined. So whenever a
package references $(HOST_DIR) or $(TARGET_DIR) in its build
process, it effectively references the per-package host/target
directories. Note that STAGING_DIR is a sub-dir of HOST_DIR, so it
is handled as well.
- Of course, packages have dependencies, so those dependencies must
be installed in the per-package host and target directories. To do
so, we simply rsync (using hard links to save space and time) the
host and target directories of the direct dependencies of the
package to the current package host and target directories.
We only need to take care of direct dependencies (and not
recursively all dependencies), because we accumulate into those
per-package host and target directories the files installed by the
dependencies. Note that this only works because we make the
assumption that one package does *not* overwrite files installed by
another package.
This is done for "extract dependencies" at the beginning of the
extract step, and for "normal dependencies" at the beginning of the
configure step.
This is basically enough to make per-package SDK and target work. The
only gotcha is that at the end of the build, output/target and
output/host are empty, which means that:
- The filesystem image creation code cannot work.
- We don't have a SDK to build code outside of Buildroot.
In order to fix this, this commit extends the target-finalize step so
that it starts by populating output/target and output/host by
rsync-ing into them the target and host directories of all packages
listed in the $(PACKAGES) variable. It is necessary to do this
sequentially in the target-finalize step and not in each
package. Doing it in package installation means that it can be done in
parallel. In that case, there is a chance that two rsyncs are creating
the same hardlink or directory at the same time, which makes one of
them fail.
This change to per-package directories has an impact on the RPATH
built into the host binaries, as those RPATH now point to various
per-package host directories, and no longer to the global host
directory. We do not try to rewrite such RPATHs during the build as
having such RPATHs is perfectly fine, but we still need to handle two
fallouts from this change:
- The check-host-rpath script, which verifies at the end of each
package installation that it has the appropriate RPATH, is modified
to understand that a RPATH to $(PER_PACKAGE_DIR)/<pkg>/host/lib is
a correct RPAT.
- The fix-rpath script, which mungles the RPATH mainly for the SDK
preparation, is modified to rewrite the RPATH to not point to
per-package directories. Indeed the patchelf --make-rpath-relative
call only works if the RPATH points to the ROOTDIR passed as
argument, and this ROOTDIR is the global host directory. Rewriting
the RPATH to not point to per-package host directories prior to
this is an easy solution to this issue.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
m68k does not seem to really support PIE as it raises the following
build failure with aer-inject:
/usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-1/output/host/opt/ext-toolchain/bin/../lib/gcc/m68k-buildroot-linux-uclibc/7.4.0/../../../../m68k-buildroot-linux-uclibc/bin/ld: /usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-1/output/host/m68k-buildroot-linux-uclibc/sysroot/usr/lib/Scrt1.o: in function `lib_main':
(.text+0x4): undefined reference to `__shared_flat_add_library'
/usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-1/output/host/opt/ext-toolchain/bin/../lib/gcc/m68k-buildroot-linux-uclibc/7.4.0/../../../../m68k-buildroot-linux-uclibc/bin/ld: final link failed: bad value
We also have another build failure with uclibc on microblazeel:
/home/buildroot/autobuild/instance-1/output-1/host/lib/gcc/microblazeel-buildroot-linux-uclibc/8.3.0/../../../../microblazeel-buildroot-linux-uclibc/bin/ld: final link failed: bad value
collect2: error: ld returned 1 exit status
Makefile.in:114: recipe for target '../utils/getconf' failed
So add a BR2_TOOLCHAIN_SUPPORTS_PIE dependency on BR2_PIC_PIE
Fixes:
- http://autobuild.buildroot.net/results/4cdd6f0368cc9d3c6e88f01b1a8929eb0839b638
- http://autobuild.buildroot.net/results/a82a484409149d7f9aff6140ddcb89f627f508c7
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
... so we can drop all config options about it and previous versions.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, the kconfig part contains two things: the kconfig option
with the paths to br2-external trees, and the kconfig menus for the
br2-external trees.
When we want to include more kconfig files from the br2-external tree
(e.g. to get definitions for pre-built toolchains), we will need to
have the paths defined earlier, so they can be used from the br2-external
tree to include files earlier than the existing menus.
Split the generated kconfig file in two: one to define the paths, which
gets included early in our main Config.in, and one to actually define
the existing menus, which still gets included at the same place they
currently are.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit 7484c1c3b8 (toolchain/toolchain-wrapper: add BR2_RELRO_),
we added the PIC/PIE flags, but based on the RELRO_FULL condition.
It is however totally possible to do a PIC/PIE executable without
RELRO_FULL, as it is also valid to do a PIC/PIE build with RELRO_PARTIAL.
Add a new option that now governs the PIC/PIE flags.
Note: it is unknown if RELRO_FULL really needs PIC/PIE or not, so we
keep the current situation, where RELRO-FULL forces PIC/PIE compilation.
Decoupling can come later from an interested party.
Signed-off-by: "Yann E. MORIN" <yann.morin@orange.com>
Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Reviewed-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Currently, use of -fstack-protector-strong is only available for gcc
starting with 4.9, on the assumption that it appeared with that version.
Although this is true, it happens that quite a few vendors will have
back-ported -fstack-protector-strong to older gcc versions (at least 4.8
seen in the wild).
Remove the guard against gcc>=4.9, and expand the help text.
Note: we could have changed the guard to something like:
depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 || BR2_TOOLCHAIN_EXTERNAL_CUSTOM
However, the latest gcc we support in the internal toolchain now *is*
gcc-4.9, and similarly all external toolchains except Sourcery ARM are
4.9 or higher. So except for the Sourcery toolchain, the condition would
have always been true. For that one toolchain, we can allow it to hit
the SSP check, and just drop the condition entirely.
Signed-off-by: "Yann E. MORIN" <yann.morin@orange.com>
Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Currently, that file is generated rather late in the configuration
process, so BUILD_DIR is known (and exists) by then.
We're soon to generate that file much earlier, at a point where
BUILD_DIR is not yet known, so we have two options:
1- declare BUILD_DIR earlier;
2- generate the file in an already-known location.
We go with the second solution, as we're already generating a
br2-external related file in BASE_DIR, so we can as well generate all
br2-external files in the same place.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, we repeat all the SSP level selection deep down to the
toolchain wrapper itself, where we eventually translate it to the
actual SSP option to use. This is a bit redundant.
Additionally, we will want to check that the toolchain actually
supports that option (for those toolchain where it was backported).
So, move the translation into kconfig, and add the qstrip'ed value
to the additional flags passed to the wrapper. Add it before
user-supplied opitons, to keep the previous behaviour (and allow
anyone crazy-enough to override it with BR2_TARGET_OPTIMIZATION).
Signed-off-by: "Yann E. MORIN" <yann.morin@orange.com>
Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Reviewed-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This commit adds a config option which will force buildroot to
build all host dependencies even if they are already present on the
host system. This may be a desirable option if different hosts are
used to build the same source. In this case, some packages will be
built on one host that are not built on another. This is problematic
if build source archives are cached afterwards for offline builds.
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Bryce Ferguson <bryce.ferguson@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
[Peter: reword, drop exit 1, reshuffle]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The ssh command was added back in 2011 with commit c61788f09 (GENTARGETS:
add support for scp://) and was used to check that the remote file
existed, back when we supported 'make source-check'.
However, in 2017, with commit bf28a165d (pkg-{download, generic}: remove
source-check), we actually removed support for source-check.
The SSH command however was not removed then, and stuck, even though
nothing ever uses it It is not even exported in the environment, and scp
does not use it either (it has -S to specify an ssh-compatible program).
Get rid of it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As reported in the bug report [1], gcc < 6 doesn't build when
FORTIFY_SOURCE is set to 1 or 2. The issue is related to the
upstream bug report [2] but the patch fixing the issue for gcc 6
has not been backported to earlier gcc versions.
Add a dependency on gcc at least version 6 to BR2_FORTIFY_SOURCE_1
and BR2_FORTIFY_SOURCE_2.
[1] https://bugs.busybox.net/show_bug.cgi?id=11476
[2] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=61164
[3] 55f12fce4c
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Matthew Weber <matthew.weber@rockwellcollins.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
[Peter: only limit for internal toolchain as suggested by Matthew]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When we do a release, we know only of a set of gcc versions that the
host may have. But in the future, distributions with newer gcc versions
may show up.
Currently, we do not recognise those versions, and thus we do as if they
were older than the oldest we know of. This means that a set of packages
become unselectable, when they should be.
We fix that by capping the detected version to the highest we know of.
Reported-by: gargar_ on IRC
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
... to follow the convention: type, default, depends on, select, help.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This variable, like BR2_DL_DIR, is designed to be overridable from the
environment. Unlike BR2_DL_DIR, it is not documented as such in the
Config.in help text. Do so now.
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
-Ofast (introduced in GCC 4.6) It combines the existing optimization level -O3
with options that can affect standards compliance but result in better optimized
code. For example, -Ofast enables -ffast-math.
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Its use has been globbed into the more generic
BR2_NEEDS_HOST_UTF8_LOCALE option now.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Julius Kriukas <julius@kriukas.lt>
Cc: Christian Stewart <kidovate@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When BR2_REPRODUCIBLE is enabled or host uses non UTF-8 capable locale
building systemd fails with an error:
[1/1080] Generating systemd.bg.catalog with a meson_exe.py custom command.
FAILED: catalog/systemd.bg.catalog
/buildroot/output/host/bin/python3 /buildroot/output/host/bin/meson --internal exe /buildroot/output/build/systemd-236/build/meson-private/meson_exe_sed_232a0623cc7ce2cd67ec72ed784b76307102ed76.dat
Warning: You are using 'ANSI_X3.4-1968' which is not a Unicode-compatible locale.
You might see errors if you use UTF-8 strings as filenames, as strings, or as file contents.
Please switch to a UTF-8 locale for your platform.
...
UnicodeDecodeError: 'ascii' codec can't decode byte 0xd0 in position 1079: ordinal not in range(128)
package/pkg-generic.mk:247: recipe for target '/buildroot/output/build/systemd-236/.stamp_built' failed
make: *** [/buildroot/output/build/systemd-236/.stamp_built] Error 1
This patch changes default host system locale from C to C.UTF-8 when
building systemd package to fix this issue. It also introduces
BR2_NEEDS_HOST_C_UTF8_LOCALE flag that checks if this locale is available on
the host system. If locale is not available error message is show and build
process is stopped.
Signed-off-by: Julius Kriukas <julius@kriukas.lt>
[Thomas: use C.UTF-8 instead of en_US.UTF-8.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This enables a user to build a complete system using these
options. It is important to note that not all packages will
build correctly to start with.
Modeled after OpenWRT approach
https://github.com/openwrt/openwrt/blob/master/config/Config-build.in#L176
A good testing tool to check a target's elf files for compliance
to an array of hardening techniques can be found here:
https://github.com/slimm609/checksec.sh
[Peter: reword fortify help texts, glibc comment]
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Building the target google-breakpad requires building the host variant
of google-breakpad. Just like the target google-breakpad only supports
a limited number of architectures, it is the same for the host
google-breakpad.
We therefore introduce a
BR2_PACKAGE_HOST_GOOGLE_BREAKPAD_ARCH_SUPPORTS option that is used
where necessary to prevent the user from choosing Google Breakpad when
building on unsupported host platforms.
Fixes:
http://autobuild.buildroot.net/results/c7c04483508f9e4d629efa54571afeb1feaa5f73/
(build on a powerpc64le machine)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of overriding the _svn command and injecting --non-interactive,
change the default value of BR2_SVN to include this flag so the end user
can choose not to use the flag.
This change helps users behind corporate system rules which may not
allow them to locally cache credentials and require interactive mode.
Signed-off-by: Sam Voss <sam.voss@rockwellcollins.com>
[Originally implemented by]
CC: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Starting with version 7, gcc automatically recognises and enforces the
environment variable SOURCE_DATE_EPOCH, and fakes __DATE__ and __TIME__
accordingly, to produce reproducible builds (at least in regards to date
and time).
However, older gcc versions do not offer this feature.
So, we use our toolchain wrapper to force-feed __DATE__ and __TIME__ as
macros, which will take precedence over those that gcc may compute
itself. We compute them according to the specs:
https://reproducible-builds.org/specs/source-date-epoch/https://gcc.gnu.org/onlinedocs/cpp/Standard-Predefined-Macros.html
Since we define macros otherwise internal to gcc, we have to tell it not
to warn about that. The -Wno-builtin-macro-redefined flag was introduced
in gcc-4.4.0. Therefore, we make BR2_REPRODUCIBLE depend on GCC >= 4.4.
gcc-7 will ignore SOURCE_DATE_EPOCH when __DATE__ and __TIME__ are
user-defined. Anyway, this is of no consequence: whether __DATE__ and
__TIME__ or SOURCE_DATE_EPOCH takes precedence, it would yield the
exact same end result since we use the same logic to compute it. Note
that we didn't copy the code for it from gcc so using the same logic
doesn't imply that we're inheriting GPL-3.0.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Jérôme Pouiller <jezz@sysmic.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <peter@korsgaard.com>
[Arnout: rewrite commit message]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The default for is set to BR2_OPTIMIZE_S, the help comment designated
BR2_OPTIMIZE_0 as default.
Changed the help comment to show that BR2_OPTIMIZE_S is the default.
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Curently, we have a choice to select between stripping and not
stripping. This is legacy code from back when we had a third option,
sstrip (super-strip).
Since we removed sstrip, stripping or not stripping is now just a
boolean rather than a choice.
Make it so.
We make BR2_STRIP_strip default to 'y' to keep the current behaviour of
defaulting to stripping.
Move BR2_STIP_none to legacy, and instruct the user to review the new
setting.
Drop any reference to BR2_STRIP_none in comments.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit teaches the generic package handling code how to extract .tar.lz
archives. When lzip is not installed on the host, host-lzip gets built
automatically.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When google-breakpad has been updated to the latest version, the C++11
dependency has been added for the target variant only.
The C++11 dependency is also required for the host variant.
Fixes:
http://autobuild.buildroot.org/results/dce/dcecb17116c0cf400c98f0052c9bf71f15d0d398
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This version add the C++11 support and microdump.
Add the C++11 dependency since it's now mendatory.
Use the same linux-syscall-support version as the one defined by DEPS
file in the Google-breakpad sources.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Pascal Huerst <pascal.huerst@gmail.com>
Cc: Frank Hunleth <fhunleth@troodon-software.com>
[Thomas: propagate the C++11 related dependency to
BR2_GOOGLE_BREAKPAD_ENABLE.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This can be selected when we need the host to have an UTF-8 locale
(e.g. to build uClibc with support for locales).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In preparation to the addition of new dependencies in the
kvm-unit-tests package, add the BR2_HOST_GCC_AT_LEAST_4_5 symbol.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Move the inclusion of br2-external's Config.in to the generated kconfig
snippet.
This will ultimately allow us to use more than one br2-external tree.
Offload the "User-provided options" menu to the generated Kconfig
snippet. We can also move the definition of the Kconfig-version of
BR2_EXTERNAL into this snippet.
We introduce an extra check that was not present in the previous code,
to check that we do have permission on that directory. Prevciously, it
was handled as a side effect of not being able to cd into there, but it
is cleaner to check it expressly.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The BR2_DEPRECATED logic is a lot less useful than the legacy handling,
because the symbols just disappears without warning to the user. For
example, we had a few defconfigs that were using deprecated symbols
(which were not actually used because BR2_DEPRECATED wasn't set) so
these didn't build the expected code anymore.
Also, the idea behind BR2_DEPRECATED is that you can easily revive it
again if there is interest. However, it is relatively easy to revert
the removal of a package as well.
The deprecation is also more effort because it has to be removed twice:
once when deprecating, and once when really removing.
It doesn't make sense to add a legacy entry for BR2_DEPRECATED. Users
who actually used it will get legacy warnings instead.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
There's nothing holding it off for uClibc-based toolchains so enable it.
Signed-off-by: Gustavo Zacarias <gustavo.zacarias@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In preparation for new deprecated features/symbols.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add the infrastructure for adding generated kconfig snippet in the
menuconfig.
For now, the kconfig snippet is generated empty, the recipe for filling
it in will be introduced in sub-sequent patches.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
