Contrary to what was written in samba.mk, the sys-quotas option
apparently does not depend on RPC support in the toolchain: Samba
builds perfectly fine on an uClibc toolchain without RPC support with
sys-quotas enabled.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
At the top of the output html page there is a dangling "results" link.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Now that we're using full perl (which needs qemu), only make auto{conf,make}
available on the supported archs.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Build error message is:
glib-2.12 required to compile QEMU
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Build error message is:
Error: zlib check failed
Make sure to have the zlib libs and headers installed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes
http://autobuild.buildroot.org/results/ccb7d6da503a81015275ff1e4ba9a564203932ec/build-end.log
Even though the build failure happens on host-qemu, adding
host-pkgconf to QEMU_DEPENDENCIES seems like the right thing to do
since that this dependency will also be needed for the target qemu
once it gets included.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Currently packages can be described in two ways: proprietary (tarball not
saved, license not described in further detail), and others (tarball
saved, license described).
Split the logic to allow the license to be always described whether or not
the source code can be redistributed.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fix Peter's reported build failure:
http://autobuild.buildroot.net/results/1dcf63799937f2216e3c712af8880ad431dbd47c/build-end.log
This is because the configure script uses absolute paths to detect dbi,
mysql and pgsql, so forcibly disable them.
Also add the optional sqlite dependency when it's selected.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Useful to produce extra warnings for packages that have special
licensing-related issues.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The problem has to do with const-correctness. This has been resolved
for various architectures, but not for the generic case.
Signed-off-by: Mischa Jonker <mischa.jonker@synopsys.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
target/Config.in.arch had become too long, and we want to remove the
target/ directory. So let's move it to arch/ and split it this way:
* An initial Config.in that lists the top-level architecture, and
sources the arch-specific Config.in.<arch> files, as well as
Config.in.common (see below)
* One Config.in.<arch> per architecture, listing the CPU families,
ABI choices, etc.
* One Config.in.common that defines the gcc mtune, march, mcpu values
and other hidden options.
[Peter: space->tab fix, mipsel64 little endian, mips3 as noted by Arnout]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This directory groups the following elements:
* the default root filesystem skeleton
* the default device tables
* the Config.in options for system configuration (UART port for
getty, system hostname, etc.)
* the make rules to apply the system configuration options
Even though the skeleton and device tables could have lived in fs/, it
would have been strange to have the UART, system hostname and other
related options into fs/. A new system/ directory makes more sense.
As a consequence, this patch also removes target/Makefile.in, which
has become useless in the process.
[Peter: fixup TARGET_SKELETON settings / documentation to match]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Yann E. MORIN <yann.morin.1998@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Cups uses /usr/lib64 if the HOST has it, no matter if it is cross compiling
for a 32bit arch, breaking the build for stuff looking in /usr/lib.
The fix of commit edd2716c didn't work, it would just force /usr/lib64 if
the target is 64 bit. Instead, force installation in /usr/lib regardless
of the host.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Graphics can be enabled for X11 as well.
Do not select DirectFB for graphics,
set DirectFB or X11 dependencies instead.
Signed-off-by: Valentine Barshak <gvaxon@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fix a build issue similar to the one encountered on xapp_listres at
http://autobuild.buildroot.org/results/06d0ef38165769df38047c1f64d4cfae835e9e54/.
Note that this new version requires a minor cross-compilation fix in
configure.ac, which has already been committed upstream but is not yet
part of a release tarball.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Basically, the BR2_TOOLCHAIN_EXTERNAL_GLIBC option no longer
unconditionally selects BR2_TOOLCHAIN_HAS_NATIVE_RPC since there are
glibc toolchains that don't have RPC support. All the predefined
toolchain profiles are updated to take into account this change: for
the moment, all glibc toolchains that have pre-defined toolchains have
RPC support, but further patches in the series add pre-defined glibc
toolchains that don't have RPC support. In the case of custom glibc
toolchains, a question is asked to the user so that he can say whether
the external glibc toolchain has RPC support or not. The validity of
this configuration option is checked by the new
check_glibc_rpc_feature function in helpers.mk.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It is no longer being developed, the FTP is dead, and Debian has
removed it from the distribution.
Also it allows to not worry about adding RPC support through libtirpc
to this package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It is no longer being developed, the FTP is dead, and Debian has
removed it from the distribution.
Also it allows to not worry about adding RPC support through libtirpc
to this package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The BR2_INET_RPC has for a long time been a not very descriptive
configuration option name, and with the advent of non-RPC glibc
toolchains and the apparition of libtirpc, we really need to rename it
to something more sensible, BR2_TOOLCHAIN_HAS_NATIVE_RPC.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since we are some day going to finally rename the badly named common
toolchain options (BR2_USE_WCHAR, BR2_ENABLE_LOCALE, BR2_INET_RPC,
etc.) into something more logical, let's start using the Crosstool-NG
toolchain options in the Crosstool-NG code.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of making the Busybox configuration more complicated by trying
to adjust it depending on whether RPC is available or not (which gets
complicated when RPC support can be provided by libtirpc), simplify
things by letting the user enable FEATURE_NFS_MOUNT or not depending
on whether RPC support is available or not.
Our default configuration do not enable FEATURE_NFS_MOUNT, so users
will not face any build problems by default. Only if they explicitly
enable FEATURE_NFS_MOUNT will they have to make sure that the
toolchain has RPC support, or that libtirpc is enabled (support for
this added in a followup patch).
[Peter: remove from CONFIGURE_CMDS as well]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since we are some day going to finally rename the badly named common
toolchain options (BR2_USE_WCHAR, BR2_ENABLE_LOCALE, BR2_INET_RPC,
etc.) into something more logical, let's start using the Buildroot
toolchain options in the uClibc code.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libhid uses timerfd, which is not yet available in the uClibc-0.9.31
that we have to rely on for avr32. Since this is pretty much a corner
case, just disable libhid for avr32.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
