Newer versions of the kernel generate device trees that are not
storable in a single 16kB sector. In these cases the kernel load address
must be changed.
The commit 2e499dcff3ef ("Add possibility to use custom kernel load address")
adds the possibility to override the default (0x08008000) kernel load
address.
This also required changes to the stm32f429_disco_defconfig and
stm32f469_disco_xip_defconfig configurations. Patching is no longer
needed.
Also update whitespaces in hash file (2 spaces).
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Acked-by: Christophe Priouzeau <christophe.priouzeau@foss.st.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The mainline U-Boot can create an i.MX specific firmware image (e.g. flash.bin).
For this the i.MX firmware files must be in the toplevel directory.
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
As reported by check-package (by calling it directly):
generate your patches with 'git format-patch -N'
Change all affected files using this command:
$ sed 's,^\(Subject: *\[PATCH\)[^]]*,\1,g' \
-i $(find * -name '*.patch' -type f)
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
As reported by check-package (by calling it directly):
use name <number>-<description>.patch
Output of:
make lpc32xxcdl-dirclean lpc32xxcdl-patch | grep 'Patching\|Applying'
Before:
>>> lpc32xxcdl 2.11 Patching
Applying lpc32xxcdl-2.11-compiler_name.patch using patch:
Applying lpc32xxcdl-2.11-delete_redundant_files.patch using patch:
Applying lpc32xxcdl-2.11-libnosys_gnu.patch using patch:
Applying lpc32xxcdl-2.11-slashes.patch using patch:
After:
>>> lpc32xxcdl 2.11 Patching
Applying 0001-compiler_name.patch using patch:
Applying 0002-delete_redundant_files.patch using patch:
Applying 0003-libnosys_gnu.patch using patch:
Applying 0004-slashes.patch using patch:
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
There are cases to want a synthetic information whether the legacy BIOS
or U-Boot boot scheme, or the EFI boot scheme, are enabled, without
resorting to testing all and each platforms.
This is already the cae in grub2 itself, for the configuration of the
BIOS/U-Boot boot partition, and builtin modules and configuration on one
hand, and the EFI builtin modules and configuraiton on the other hand.
It is also the case for mender-grubenv, which will want to know if
either or both are enabled, but without having to resort to testing all
the cases.
Add two new symbols, that each represent those conditions:
* BR2_TARGET_GRUB2_HAS_LEGACY_BOOT
* BR2_TARGET_GRUB2_HAS_EFI_BOOT
Each target selects the appropriate bool, which makes it much more
simple for other packages such as mender-grubenv to check if grub legacy
or EFI is selected.
And of course, we also make use of those symbols in grub2 itself, to
simplify the conditions for showing.hiding legacy and EFI options.
Additionally (but that does not merit being in its own patch), add a
comment on the closing 'endif' for the EFI part.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
[yann.morin.1998@free.fr:
- s/BR2_TARGET_GRUB_/BR2_TARGET_GRUB2_/
- rename variables anyway
- use variables in grub2 itself
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Köry Maincent <kory.maincent@bootlin.com>
This fixes build on an ARM64 host (and I assume also
other non-x86).
Signed-off-by: Urja Rannikko <urjaman@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Starting with uboot 2021.10, with upstream commit 473fc279c89 (kconfig /
kbuild: Re-sync with Linux 4.20), the kconfig in uboot now needs the
compiler to detect its features.
Like was done for linux in 3fc990a798 (linux: kconfig needs the
toolchain) and barebox in 1c1a629d81 (boot/barebox: kconfig needs the
toolchain), add the toolchain to the kconfig dependencies of uboot.
Reported-by: Davian on IRC
Reported-by: Xogium on IRC
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Don't override UBOOT_DEPENDENCIES in a conditional
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
U-Boot does not yet have SPL code to initialize the DDR controller on the
Allwinner D1 - So instead package the sun20i-d1-spl bootloader, which is
based on boot0 from the Allwinner BSP with some modifications to build it
separately from the BSP and boot mainline U-Boot as explained on the
linux-sunxi wiki:
https://linux-sunxi.org/Allwinner_Nezha
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
There seems to still be a similar parallel build issue, but with this
patch applied, it occurs much less frequently: from a 1/3rf failure
rate, I am now experiencing failures under the 1/10th mark.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When creating the image we are using the target modules. Building
the modules for host is then unnecessary.
Lets configure host Grub2 for the 'none' platform.
Note that this still installs a platform-dependent file:
.../host/lib/grub/i386-pc/config.h
This file does not seem to have much purpose, but it is harmless.
We did not care to provide a post-isntall hook to remove it.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch updates the location of cdboot.img used, to select the one
from the target directory and not from the host.
The host-grub2 is built only to have access to the Grub tools binaries.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch adds the calls to MESSAGE, to explicit the different step of
the per-platform builds, following the current tuple loop. Besides a
nicer output to the user, this can also help debug what step actualy
failed.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch cleans the code by removing unnecessary \-continuations.
It replaces the semi-colons by either && or separate lines.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The tools were not installed anymore since we move from autotools to
generic-package. This patch fixes their installation.
We have decided to implement the install tool process by running the "make
install" command for each tuple. This allows to have all different
platforms Grub modules installed in the target. The drawback is the
overwrite of Grub2 binaries tools during each "make install" command. This
drawback is absolutely not important as it happens in the same package. This is
the best option to avoid unnecessary and more complexity to this package.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add BR2_TARGET_EDK2_PLATFORM_OVMF_I386 for x86_64 architecture.
Update the management of EDK2_ARCH to follow the edk2 platform type in
place of BR2 architecture.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add support the build the firmware for QEMU i386 pc machine
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
[yann.morin.1998@free.fr:
- do not make it available for BR2_x86_64
- introduce BR2_TARGET_EDK2_ARCH_SUPPORTS
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When Grub2 is build it is configured only for one boot set-up, BIOS Legacy,
EFI 32 bit or EFI 64 bit. It can not deal with several boot set-up on the
same image.
This patch allows to build Grub2 for different configurations simultaneously.
To cover Grub2 configuration of legacy BIOS platforms (32-bit), 32-bit EFI
BIOS and 64-bit EFI BIOS in the same build, multi-build system felt much more
reasonable to just extend the grub2 package into 3 packages.
We can no longer use autotools-package as a consequence of this multi-build, and
we have to resort to generic-package and a partial duplication of
the autotools-infra. Grub2 was already using custom option like --prefix or
--exec-prefix so this won't add much more weirdness.
We use a GRUB2_TUPLES list to describe all the configurations selected.
For each boot case described in the GRUB2_TUPLES list, it configures and
builds Grub2 in a separate folder named build-$(tuple).
We use a foreach loop to make actions on each tuple selected.
We have to separate the BR2_TARGET_GRUB2_BUILTIN_MODULES and the
BR2_TARGET_GRUB2_BUILTIN_CONFIG for each BIOS or EFI boot cases.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
[yann.morin.1998@free.fr:
- keep sub-options properly indented
- fix check-package
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The startup.nsh file is useless to boot EFI payloads. We just need to
follow the naming detection specified in the UEFI spec.
The EFI payload need to be placed in the boot/efi folder in the EFI partition
and follow the architecture naming as described below:
32bit : bootia32.efi
x64 : bootx64.efi
aarch32 : bootarm.efi
aarch64 : bootaa64.efi
This naming is already right in the packages involved (systemd, grub2,
gummiboot), therefore we just need to drop the generation of the
startup.nsh file.
The usage of the startup.nsh in genimage is also dropped to avoid errors in
the image generation.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Tested-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Syslinux use some python scripts during the build and they
are using python interpreter by default. It fail to build
when there is no python interpreter on the host.
[...]/syslinux-6.03/com32/cmenu/menugen.py
make[6]: python: No such file or directory
Since Syslinux 5.00, we can override the python interpreter
used during the build:
https://repo.or.cz/syslinux.git/commitdiff/4dec62ce9c2c0d170f21b3ae2d7c618eb7a30c05
Add the missing host-python3 dependency and override
it in SYSLINUX_BUILD_CMDS.
Fixes:
https://gitlab.com/kubu93/buildroot/-/jobs/1614446766
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[yann.morin.1998@free.fr: fix check-package]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since v2.2 release (commits 8cc36aec912 "doc: De-duplicate readme and
license files" and 9f1622b018ab "doc: Move content out of readme and
create new index page "), the license.rst file at the root of the git
repo is only telling to look at docs/license.rst file.
Let's point the ARM_TRUSTED_FIRMWARE_LICENSE_FILES to the correct file
and modify the .hash file accordingly.
The comment has also been wrong since we bumped from version 1.4 to 2.2
in commit a757d173f1 (boot/arm-trusted-firmware: bump to version
2.2). Drop referencing an explicit version, so that is is never wrong
again.
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
[yann.morin.1998@free.fr: also fix the comment.]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 2cfdf8b8a2 (boot/mv-ddr-marvell: Bump to HEAD as of 20201207)
forgot to update the hash a a source file that we use as license file.
Fixes: #14221
Reported-by: nyanyamiau@gmail.com
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: D. Olsson <hi@senzilla.io>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The mainline U-Boot can create an i.MX specific firmware image (e.g. flash.bin).
For this the i.MX firmware files (DDR, HDMI) must be in the toplevel directory.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
[yann.morin.1998@free.fr: simplify hook]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
If the ATF binary is used by U-Boot, the file is expected to be in the
toplevel directory.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Similarly to Uboot, this patch adds the ability to copy in and build
out-of-source device tree sources during an ATF build.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update to AT91Bootstrap 4.0.0 version.
This package is now released under MIT license, and a license file was
added.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 5f432df7e2 ("boot/arm-trusted-firmware: change
ENABLE_STACK_PROTECTOR value when disabled") set
ENABLE_STACK_PROTECTOR=0 when disabled. But since we pass this value as
MAKE_OPT, the internal ATF logic that sets ENABLE_STACK_PROTECTOR again
based on its initial value breaks. This leads to build failure:
make[1]: *** [/builds/buildroot.org/buildroot/output/build/arm-trusted-firmware-v2.4/build/a80x0_mcbin/release/libc/assert.o] Error 1
aarch64-buildroot-linux-uclibc-gcc.br_real: error: unrecognized command-line option ‘-fstack-protector-0’; did you mean ‘-fstack-protector’?
Move ENABLE_STACK_PROTECTOR to make environment instead to allow make to
change its value.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/1497663294
Cc: Dick Olsson <hi@senzilla.io>
Cc: Sergey Matyukevich <geomatsi@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit
cf176128ec ("boot/arm-trusted-firmware:
add SSP option"), we are passing ENABLE_STACK_PROTECTOR=none when we
want to disable SSP usage in TF-A. While this works fine in recent
versions of TF-A, older versions such as TF-A will end up passing
-fstack-protector-none in this situation, which fails as this is not a
valid gcc option (the valid gcc option is -fno-stack-protector).
To solve this, we pass ENABLE_STACK_PROTECTOR=0 which was in older
TF-A versions used to say "don't do anything with SSP", and is also
still supported in newer versions of TF-A.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/1478738580
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Existing patch is for 3.13.0 optee version but is located at the root
of optee-os folder, leading to error when applying it on more recent
version. Move it to a dedicated 3.13.0 folder.
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
As Thomas put it:
The <pkg>_HELP_CMDS variable allows packages using the
kconfig-package infrastructure to display their specific
targets related to the handling of their configuration.
However, it was not consistently used and handled by the
different packages.
So, this commit switches all the kconfig-based package to use the
generic help helper.
As a consequence:
- all kconfig packages now advetise their kconfig-related actions,
where some were previously missing: at91bootstrap3, linux-backports,
swupdate, xvisor;
- busybox advertises it does not support defconfig files;
- the 'foo-savedfconfig' action is no longer advertised: it is to be
considered an internal implementation detail.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Bump OP-TEE OS package version to OP-TEE release 3.13.0.
Add a patch already merged OP-TEE to fix build issue seen with 3.13.0
on some BR toolchain.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
If U-Boot CONFIG_OF_SEPARATE is defined [1], then the device tree will
be built and placed in a u-boot.dtb file alongside u-boot.bin.
When BR2_TARGET_UBOOT_FORMAT_DTB is enabled, buildroot will copy
u-boot.dtb to $(BINARIES_DIR).
This is useful for RISC-V platforms that want to build OpenSBI with an
external DTB by using FW_FDT_PATH [2].
[1] https://github.com/u-boot/u-boot/blob/master/doc/README.fdt-control
[2] https://github.com/riscv/opensbi/blob/master/docs/firmware/fw.md
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Drew Fustini <drew@beagleboard.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
If U-Boot CONFIG_OF_SEPARATE is defined [1], then the device tree will
be built and placed in a u-boot.dtb file alongside u-boot.bin.
When BR2_TARGET_UBOOT_FORMAT_DTB is enabled, buildroot will copy
u-boot.dtb to $(BINARIES_DIR).
This is useful for RISC-V platforms that want to build OpenSBI with an
external DTB by using FW_FDT_PATH [2].
[1] https://github.com/u-boot/u-boot/blob/master/doc/README.fdt-control
[2] https://github.com/riscv/opensbi/blob/master/docs/firmware/fw.md
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Drew Fustini <drew@beagleboard.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 2eaa6d0f36 (boot/uboot: fix uboot building host tools on x86
architecture) added use of $(PKG_CONFIG_HOST_BINARY), but forgot to add
the corresponding build-ordr dependency.
Add this missing depenency now.
Additionally, the associated test had an explicit host pkgconf enbled in
its configuration. This is superfluous now that uboot properly depends
on host-pkgconf, so drop that from the test.
Note: it hapenned to work, because host-pkgconf, when explicitly enabled
in the configuration, and without per-package directories, would build
before uboot and thus be available. This would fail with PPD, though,
and thus would break for TLPB.
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
