Substitute spaces with tab on 2 entries for consistency.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds support for Xilinx Kria KD240 starter kit.
KD240 features can be found here:
https://www.xilinx.com/products/som/kria/kd240-drives-starter-kit.html
While the Kria SOM is based on a ZynqMP SoC, there are some key
boot config differences from the other ZynqMP evaluation boards.
1. There are no boot switches on Kria SOMs. The boot mode is thus
hard configured for QSPI flash. A pre-programmed boot.bin comes
with every Starter Kit. U-Boot can then find the Linux kernel and
file system on the SD card.
Optional instructions for updating the boot.bin in the QSPI flash
can be found in the readme.txt file and the link below.
https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/1641152513/Kria+K26+SOM
2. Kria SOMs use UART1 for the console instead of UART0. For this
reason, Kria Starter Kits will use a separate extlinux.conf file
from other ZynqMP evaluation boards.
3. The KD240 has a USB to SD card bridge, so the Linux kernel
and file system are found on /dev/sda1 and /dev/sda2.
4. The following patches have been submitted upstream to u-boot.
Without these patches, the usb, sd card and ethernet peripherals
do not work correctly.
https://patchwork.ozlabs.org/project/uboot/patch/20231213134007.2818069-1-neal.frager@amd.com/https://patchwork.ozlabs.org/project/uboot/patch/20231213134052.2818879-1-neal.frager@amd.com/
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
[Peter: add upstream tag, drop patch numbering from patches]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds support for ZynqMP ZCU104 evaluation board.
ZCU104 features can be found here:
https://www.xilinx.com/products/boards-and-kits/zcu104.html
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The zynq_qmtech_defconfig has not been maintained for 3 years, and is now
using a very out of date u-boot and Linux kernel. Since there are 4 other
zynq7000 defconfigs available in buildroot and Julien no longer has a
functional board, drop the defconfig.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Acked-by: Julien Olivain <ju.o@free.fr>
[Peter: reword commit message]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds support for Xilinx Kria KR260 starter kit.
KR260 features can be found here:
https://www.xilinx.com/products/som/kria/kr260-robotics-starter-kit.html
While the Kria SOM is based on a ZynqMP SoC, there are some key
boot config differences from the other ZynqMP evaluation boards.
1. There are no boot switches on Kria SOMs. The boot mode is thus
hard configured for QSPI flash. A pre-programmed boot.bin comes
with every Starter Kit. U-Boot can then find the Linux kernel and
file system on the SD card.
Optional instructions for updating the boot.bin in the QSPI flash
can be found in the readme.txt file and the link below.
https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/1641152513/Kria+K26+SOM
2. Kria SOMs use UART1 for the console instead of UART0. For this
reason, Kria Starter Kits will use a separate extlinux.conf file
from other ZynqMP evaluation boards.
3. The KR260 has a USB to SD card bridge, so the Linux kernel
and file system are found on /dev/sda1 and /dev/sda2.
Signed-off-by: Neal Frager <neal.frager@amd.com>
[Peter: fix kr260.sh shellcheck warnings, similar to kv260.sh]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
I am no longer work at Synopsys, so remove this email address.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds support for Xilinx Zynq ZC702 starter kit.
ZC702 features can be found here:
https://www.xilinx.com/products/boards-and-kits/ek-z7-zc702-g.html
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Used with the latest version of python-constantly. It is only needed as a
host package.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This package is currently used in Fedora39 to provide python bindings
for kmod, and it is Python 3.12.0 compatible.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr: LGPL in in COPYING.LESSER]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This test case runs firewalld using both system and sysvinit.
run `firewalld-cmd --state` and ensure the output is "running" with a return
code of 0.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Upstream suggests to use it as a static library only, so follow that
principle.
Signed-off-by: Alessandro Partesotti <a.partesotti@gmail.com>
[Arnout:
- keep DEVELOPERS alphabetical;
- use oatpp for the prompt;
- add threads to the toolchain dependencies comment;
- move comment after the main prompt;
- rewrap the help text;
- empty line before upstream URL;
- hash comment Locally calulated instead of pointing to upstream
tarball URL;
- change hash to sha256;
- add hash for license file;
- reorder variables in .mk file;
- use _CONF_OPTS instead of invalid _CMAKE_OPTS.
]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This package defines a simple abstract interface for playing event sounds.
It is mainly used by desktop applications such as GDM and GNOME Session.
http://0pointer.de/lennart/projects/libcanberra/
Signed-off-by: Takumi Takahashi <takumiiinn@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This update is required to install the latest version of the GNOME desktop.
Currently, only gvfs depends on this package, and we have confirmed that
gvfs can be built.
Signed-off-by: Takumi Takahashi <takumiiinn@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
eza is a modern, maintained replacement for ls, built on exa.
https://github.com/eza-community/eza.git
Signed-off-by: Saeed Kazemi <kazemi.ms@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
procs is a modern replacement for ps written in Rust
https://github.com/dalance/procs.git
Signed-off-by: Saeed Kazemi <kazemi.ms@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This should have been part of commit
9a51a07a91 ("configs/sipeed_licheepi_nano:
new board")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
tftpy is described as a pure Python implementation of the Trivial FTP
protocol. Add support for this package.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
EditorConfig [0] is an editor-agnostic configuration file, to set
preferences on how to edit text: tabs vs. spaces, tab width, indentation
size, line endings...
A large number of editors support EditorConfig, either natively [1] or
with the help of plugins [2].
Add a basic .editorconfig that provides defaults for most of the files
used by Buildroot. More can be added in the future if we can find more
matching patterns.
The values are chosen a bit arbitrarily, unless we already have a
(un)written rule about it. Notably, indentation defaults to using 4
spaces, and only a set of files for which we require TABs (Makefile,
essentially) or have already settled for TABs (Kconfig files, init
scripts...) are configured so. The traditional width of TABs is 8 char,
and we pair TAB indentation with TAB size.
Trailing spaces are usually useless, except in asciidoc source where
they can be used to force a new line without a new paragraph.
One of the limitations of .editorconfig, though, is that it matches on
filenames (e.g. *.py), not on the content (e.g. no use of mimetype, or
libmagic, or such). Still, this is enough to cover a lot of files in
Buildroot.
[0] https://editorconfig.org/
[1] https://editorconfig.org/#pre-installed
[2] https://editorconfig.org/#download
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Checkpoint/Restore In Userspace (CRIU), is a software tool for the
Linux operating system to make it possible to freeze a running
application and checkpoint it to persistent storage as a collection of files.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
[yann.morin.1998@free.fr:
- BR2_ARM_CPU_ARMV8M does not exist
- BR2_BR2_powerpc64le misspelled
- move all arch dependencies to BR2_PACKAGE_CRIU_ARCH_SUPPORTS
- comment hidden with arch dependencies
- select host-python3, don't depend on it
- extend legal-info: LPLG-2.1 for lib/, MIT for images/
- PREFIX is also used at compile time for PLUGINDIR
- copy .proto file, rather than symlinking
- wrap long lines
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
zenoh-pico is the Eclipse zenoh implementation that targets constrained
devices and offers a native C API. It is fully compatible with its main
Rust Zenoh implementation, providing a lightweight implementation of
most functionalities.
https://github.com/eclipse-zenoh/zenoh-pico
Signed-off-by: Alex Michel <alex.michel@wiedemann-group.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
CuteKeyboard is a Qt virtual keyboard plugin for embedded applications
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Acked-by: Andrea Ricchi <andrea.ricchi@amarulasolutions.com>
[Arnout:
- add DEVELOPERS entry;
- fixed the title in the .mk file;
- use select instead of depends on;
- with the above, add depends on QT5 and QT5_JSCORE.
]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
These headers are required to build the pacakge spirv-tools which is
requried by mesa3d for building rusticl:
https://docs.mesa3d.org/rusticl.html
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Sebastian Weyer <sebastian.weyer@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
host-rust-bindgen will be required to build several different rust-based
packages, including a Linux kernel with rust modules and mesa3d's
rusticl which is the rust-based implementation of OpenCL.
The Cargo.toml file at the project root is a "virtual manifest". Since
we only want to install rust-bindgen, we can specify RUST_BINDGEN_SUBDIR
= bindgen-cli to use the Cargo.toml from this directory.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Sebastian Weyer <sebastian.weyer@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
NVIDIA driver persistence daemon.
Signed-off-by: Raphael Pavlidis <raphael.pavlidis@gmail.com>
[Arnout:
- disable on BR2_STATIC_LIBS;
- only depend on tirpc if toolchain doesn't have RPC;
- use unstripped binary - the strip support in the makefile is utterly
broken (and we anyway strip in target-finalize);
- define NVIDIA_PERSISTENCED_USERS directly rather than with another
variable;
- install all the systemd stuff in
NVIDIA_PERSISTENCED_INSTALL_INIT_SYSTEMD.
]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
libnvme provides type definitions for NVMe specification and utilities
for nvme devices handling in Linux. libnvme is needed by udisks from
version 2.10.0+
https://github.com/linux-nvme/libnvme
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This tool is needed by some SoCs to sign the bootloader.
See the list of supported SoCs:
https://github.com/LibreELEC/amlogic-boot-fip
The variable BR2_PACKAGE_HOST_AMLOGIC_BOOT_FIP_DEVICE is used to specify
for which device this package needs to be used.
This tool uses pre-compiled binaries in order to sign the bootloader.
These binaries are provided under a proprietary license that prohibits
any redistribution of the resulting images.
A similar tool was tried to be added in the past:
http://patchwork.ozlabs.org/project/buildroot/patch/1533545408-11248-2-git-send-email-narmstrong@baylibre.com/
This time however a license file is present which can be used by
make legal-info. Additionally, acs_tool.pyc was replaced by acs_tool.py
and is therefore not compiled anymore.
Signed-off-by: Sebastian Weyer <sebastian.weyer@smile.fr>
[Romain:
add AMLOGIC_BOOT_FIP_REDISTRIBUTE = NO
add qstrip for BR2_PACKAGE_HOST_AMLOGIC_BOOT_FIP_DEVICE
remove build-fip-all.sh copy, not needed
factorize file copy in HOST_AMLOGIC_BOOT_FIP_INSTALL_CMDS
update commit log with the github url where we can find the list of supported SoCs.
]
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Mako provide some external plugins that requires additionnal and
optional runtime dependencies, make sure we test these situations.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This new runtime test allows to make sure that the python-mako package
minimally works at runtime.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package provides firmware needed for the LS1046A-FRWY Ethernet.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add initial support for Orangepi Zero3 board:
- U-Boot 2021.07 fork by Orangepi
- Linux 6.1.31 fork by Orangepi
- Default packages from buildroot
Enable CONFIG_MFD_AC200 as it is used directly by other module,
resulting in build failure when disabled.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Tested-by: Sergey Kuzminov <kuzminov.sergey81@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 32cec3be97 (docs/manual: rename *.txt as *.adoc) renamed the manual
files but forgot to update the reference in the DEVELOPERS file, causing
check-package to warn:
WARNING: 'docs/manual/adding-packages-meson.txt' doesn't match any file, line 851
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add support for Bananapi M2 Berry board based on the Allwinner V40/A40i
SoC.
- U-Boot 2023.07
- Linux 6.1.38
Board specifications: https://wiki.banana-pi.org/Banana_Pi_BPI-M2_Berry
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is a simple test that builds and runs the futter-gallery application and
checks if the service is active.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr: fix flake8 warnings]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Flutter Gallery is a resource to help developers evaluate and use Flutter.
It is a collection of Material Design & Cupertino widgets, behaviors, and
vignettes implemented with Flutter.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
flutter-pi is one of many flutter-embedders. However, flutter-pi is unique
because it doesn't require X or Wayland to run. So long as there is support for
KMS and DRI flutter-pi should run on any platform that flutter-engine supports.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr: drop unused BR2_PACKAGE_FLUTTER_PI_TEST_PLUGIN]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
