Also remove merged patches.
So, autoreconf is no longer needed.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Match the systemd service file and set time immediately on startup
rather than small steps when it differs a lot.
On embedded scenarios this is better since boards that lack a
battery-backed RTC might start at unix epoch and the time set will delay
for quite a while otherwise.
For boards that do have a battery-backed RTC the behaviour will be
practically the same unless the RTC drifts a lot.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit e7d04dd2d replaced /etc/dropbear with a symlink to /var/run and
updated the start scripts to replace it with a real directory, so the
keys would be persistent. However, it turns out that this is pretty
confusing even for expert users, who don't know how to make the keys
really persistent now.
Update the help text explaining what the issue is, and telling the user
to replace the /etc/dropbear symlink with a symlink to a persistent
directory. Also mention the possiblity of unionfs.
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The revision 18153 dates from 2012-01-20. Lets update to latest changed revision
19427 which dates from 2015-01-07.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update to 1.0.11. Contains a lot of bugfixes
and some new features:
* mips{32r6,64r6} enablement
* argp support
* support for very simple /etc/gai.conf
* Xtensa nommu vfork fix
* systemd portability fixes
Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
mraa provides a unified interface for IO on Galileo, Edison,
Raspberry Pi and others.
Signed-off-by: Pieterjan Camerlynck <pieterjan.camerlynck@gmail.com>
Tested-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Follow the upstream EOL cycle and mark 4.2 as deprecated for 2016.02.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The generated $(TARGET_DIR)/etc/network/interfaces mixes spaces and
tabs. Fix by using tabs only.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch to bz2 tarball since there doesn't seem to be an xz release this
time around.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2015-5300 - MITM attacker can force ntpd to make a step larger than
the panic threshold.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Patch now upstream, so drop it along autoreconf and gettextize.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Move libpciaccess selection under BR2_PACKAGE_XSERVER_XORG_SERVER_MODULAR
to simplify.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When BR2_PACKAGE_XPROTO_DRI3PROTO and
BR2_PACKAGE_XSERVER_XORG_SERVER_MODULAR are selected, xlib_libxshmfence
package build is triggered at Makefile level.
Since 28f67899e5, the build
stop if a package build is trigged at Makefile level without
being selected at Config.in level.
Fixes:
http://autobuild.buildroot.net/results/a25/a253d19191dbc8bcc54f9e9d7fddae03d6695b4b/
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When BR2_PACKAGE_MESA3D_DRI_DRIVER and BR2_PACKAGE_XPROTO_DRI3PROTO
are selected, xlib_libxshmfence and xproto_presentproto packages
build are trigged at Makefile level.
Since 28f67899e5, the build
stop if a package build is trigged at Makefile level without
being selected at Config.in level.
Fixes:
http://autobuild.buildroot.net/results/6a4/6a471d2873ff7e645b0f0962d1719632e290993c
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In preparation for the bump to Python 3.5.0, let's switch all the
patches to the Git format. This way, a Git repository of the Python
source code can be used to manage those patches, which makes it easier
to bump to newer Python versions.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Support for Nios-II has been added in strace release 4.11.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes#8581
Commit 2c879f95a0 (pciutils: cleanup) refactored the make arguments, but
accidently changed the logic to disable dns based lookups to pass
PCIUTILS_DNS=no instead of DNS=no, causing the autotection to be used.
This autodetection looks at host includes, so it isn't safe for cross
compilation.
Disable it by setting the correct make variable instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Most embedded systems do not have a keyboard.
If a keyboard is attached afterwards (e.g. to an accessible USB host port)
this allows the user to reboot the system by pressing Ctrl-Alt-Del, which
might not be desired.
Signed-off-by: lothar felten <felten@vaxnet.de>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, the check that packages we build are indeed enabled is done
at the time a package is configured.
This can come quite late in the build process, and does not provide
direct knowledge of the real culprit for the incorrect dependency.
However, we can improve these two issues quite easily, albeit at the
expense of a very slightly more complicated make code.
First, the check can not be done at the time we define the package, i.e.
in the inner-generic-pacakge, because all its dependencies might have
not been parsed yet, so we can't yet know whether it is enabled or not
(because we can't match the package name of the dependency to its
Kconfig variable yet).
But then, we know we have all packages definitions after we scanned the
the bundled packages, kernel, bootloaders and toolchains, as well as the
br2-external tree (if any).
So, at this location, we iterate through the list of enabled packages,
and check that the packages they each depend on are indeed enabled.
This allows us to:
1- do the check very early, before any build action,
2- report on the exact offending package very easily.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This fixes this build failure (and many others):
http://autobuild.buildroot.org/results/d56/d56bfc69ef0a478219c959d50fb96d526fc2155e/
The build failure is caused by the build system using -Werror; this is
already patched upstream, so this commit just imports the upstream
patch.
Signed-off-by: Noé Rubinstein <noe.rubinstein@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
tremor depends on libogg package but doesn't select it
in Config.in. so libogg build is trigged at Makefile level.
Since 28f67899e5, the build
stop if a package build is trigged at Makefile level without
being selected at Config.in level.
Fixes:
http://autobuild.buildroot.net/results/0da/0da3265f0f1e499f5d34ed32b0d13a2eda53f976
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
PyXML is bitrotten and obsolete. You'll find the functionality it
previously provided is now included in the Python standard library.
So no need to keep this package in Buildroot anymore.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libusb-compat depends on libusb package, so we need to select
libusb package at the same time as libusb-compat to avoid an
unmet dependency.
Since 28f67899e5, the build
stop if a package build is trigged at Makefile level without
being selected at Config.in level.
This is the case here with BR2_PACKAGE_OPENOCD_USBPROG which
select BR2_PACKAGE_LIBUSB_COMPAT without selecting
BR2_PACKAGE_LIBUSB.
Fixes:
http://autobuild.buildroot.net/results/b4a/b4a8c54eed6bf75ab8ade0653953d19792155727/
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
BR2_PACKAGE_GST_PLUGINS_BAD_ZBAR select BR2_PACKAGE_ZBAR which
has several dependencies from libv4l.
Propagate these dependencies to avoid unmet dependencies while
selecting BR2_PACKAGE_GST_PLUGINS_BAD_ZBAR.
[Peter: show comment if toolchain dependencies aren't available]
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
dillo was explicitly pulling in libjpeg instead of the virtual 'jpeg'
package, even though it also works with jpeg-turbo.
Reported-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Compiled and tested on arm (beaglebone black), aarch64 (qemu),
i386 (qemu) and x86_64 (qemu).
[Peter: limit to supported archs, disable -Werror]
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The new package acsccid properly propagated the dependency of libusb,
but not the one of pcsc-lite, causing pcsc-lite to be selected in
situation where it shouldn't be (such as in static-only
configurations).
Fixes:
http://autobuild.buildroot.org/results/e0b/e0b205dceb84303d1dfaf8b39562b934f6914b8d/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There is a typo in skeleton.mk preventing rsync from excluding VCS
folders such as .svn.
Signed-off-by: Nathan Ford <nford@westpond.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libdvbpsi is a library used by vlc for decoding MPEG TS
[Thomas:
- add missing Config.in comment about the thread dependency.]
Signed-off-by: Pieterjan Camerlynck <pieterjan.camerlynck@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Besides the version bump we also require this patch, which is upstream.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- fix commit title
- change libusb back to a mandatory dependency, since even though
there is a --disable-libusb option, it has no effect, and the code
fails to build due to missing libusb.h
- add hash file, noticed by Arnout
- remove host-perl dependency, noticed by Arnout
- rewrap Config.in help text, noticed by Arnout.]
Signed-off-by: Juha Rantanen <juha@codercoded.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As reported by Yann E. MORIN [1], the latest CS PowerPC toolchain (2012.03)
requires a PPC CPU with SPE, which is basically two variants, 8540 (e500v1) and
8548 (e500v2) in Buildroot. All other PPC CPU can't use that toolchain.
Keep CS PowerPC 2011.03 as latest available version and add a second Kconfig
symbol for the CS PowerPC 2012.03 since it's verry specific to one CPU type
(e500v2).
Previously it was possible to select the CS 2012.03 with a powerpc 8540 (e500v1)
CPU but the sysroot provided by the toolchain only support the 8548 (e500v2)
variant. Allow to select CS 2012.03 only with BR2_powerpc_8548.
Also re-add the previous CS toolchain handling for pixman and liquid-dsp.
[1] http://lists.busybox.net/pipermail/buildroot/2015-December/148308.html
Reported-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
hidapi uses iconv functions, which on uClibc without locale support is
provided by the external libiconv library. This commit adds the
necessary libiconv handling to make the hidapi package build on
!locale toolchains.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
hidapi currently doesn't build on non-C++ capable toolchains due to
hidtest being a C++ source file, even if it in facts contains only C
code. This commit adds a patch that fixes this in the hidapi source
code.
Fixes:
http://autobuild.buildroot.org/results/6ce/6ce0a4b8c7acb857005350a57c313b493bc6e2b7/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 301e8ffbb2 (gst1-plugins-bad: update configure options) added a sub
option for openh264, but didn't propagate the toolchain dependencies or add
any configure options.
Fix this and while we're at it also add a help text for the option.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The OpenJPEG library is packaged in buildroot (version 1) and there is a
plugin "openjpeg" using it in gst1-plugins-bad. This commit add the option
for building this plugin. It provide a JPEG2000 encoder and decoder.
[Peter: use 'select' instead of 'depends on', sort alphabetically]
Signed-off-by: Vincent Dehors <vincent.dehors@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It conflicts with jsoncpp, bind probes for json/json.h first, but that
header is installed by jsoncpp, which is completely different from
json-c.
Since it's not clear who's correct here (there might be some other
json-c predecessor/version that installs there as well) and the same
functionality (stats channel) is provided by libxml2 as well, just
disable libjson support completely.
Fixes:
http://autobuild.buildroot.net/results/226/2262c9b46663ea7a45e128a5fd7ff30417c2c2a7/build-end.log
(indirectly, it was probing aboslute directories while searching for it)
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As was suggested by the <pkg>_DEPENDENCIES variable, the audit support
in DBus requires both audit and libcap-ng. However, it didn't take
care of the fact that libcap-ng must be enabled in the configuration
to depend on it, causing some build failures with the newly added
check.
DBus configure.ac confirms that both packages are needed to enable
audit support, so we simply fix the condition to only be true when
both BR2_PACKAGE_AUDIT *and* BR2_PACKAGE_LIBCAP_NG are true.
Fixes:
http://autobuild.buildroot.org/results/239/23953cc66faecb65e9ebf1f6980924f823d736a2/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Leave the LTS series for the latest stable version for libressl
compatibility.
Unfortunately this means threads are now required, but this shouldn't be
a problem for a fully-featured resolver.
Drop 0001-disable-tests.patch since it's no longer required, genrandom
isn't run unless the tests are called upon.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since commit 00be67d846 (wireshark: enable GUI options, 2015-12-02) the GUI
is enabled when the required libraries are present. Update the config help
text accordingly.
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add hash file, switch to setuptools and change project's home page to
GitHub.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In commit e84fd04e88, Yann added a
Config.in symbol for netbsd-queue in a brand new Config.in file. But
that Config.in file was never included anywhere, making it somewhat
useless.
Let's include it under Libraries -> Other, even if its actual
inclusion location doesn't matter much since it's just a hidden
Config.in option anyway.
Fixes:
http://autobuild.buildroot.org/results/d23/d23a1c51c4d7a260364aeef576fdf5a407abc2f6/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libjpeg should not be selected directly, as it is one implementation
of the virtual jpeg package. Consequently, this commit moves minidlna
and libsvg to use the jpeg virtual package instead.
The build has been tested with both libjpeg and jpeg-turbo variants.
Fixes:
http://autobuild.buildroot.org/results/a12/a12760dea9e9d7ca62d14d0821539cc4b0c76835/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Virtual packages do not have a Kconfig symbol, so we must not check that
they are enabled.
Fixes:
http://autobuild.buildroot.org/results/287/28713478cc6edf8e5d5c3e830fee86a42f0afa8d/
... and numerous similar failures ...
[Thomas:
- use "$($(PKG)_IS_VIRTUAL)" != "YES" instead of !
"$($(PKG)_IS_VIRTUAL)" = "YES"]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Select that package from musl, too, since it is a dependency.
Fixes:
http://autobuild.buildroot.org/results/15c/15c9a80fb2754ed1866b59d5e62d02691b57834e/
... and numerous similar issues ...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Sergio Prado <sergio.prado@e-labworks.com>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we check that a target package in the _DEPENDENCIES of another
package has to be enabled in config, all target packages must have a
kconfig symbol.
Add a Kconfig symbol for linux-headers, and select it from the packages
that depends on it (C libraries).
Also remove the now-misleading comments "for legal-info" from the C
libraries.
Fixes:
http://autobuild.buildroot.org/results/2a9/2a9e5d27b34357819b44f573a834da1ba5079030/
... and numerous similar failures ...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add option for nftables compat utilies and for bpf compiler/nfsynproxy
configuration tool.
Drop symlink trickery since it's not required any more.
Switch homepage to proper one and drop the kernel v2.4+ note since
that's not supported by buildroot anyway.
Drop most patches (except musl build) since they're upstream.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
And reorder 'depends' before 'select'.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
And reorder 'select' after 'depends'
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
And reorder 'depends' after 'bool'.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Thomas:
- addition of 'depends on BR2_arm' as suggested by Yann.
- addition of a comment in the Config.in help text that says that
this library is a pure abomination.
- fix the hash, since apparently upstream changes the released
tarballs after they are published.
- fix license, it's GPLv2, not GPLv2+.]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- provide only libmongoose.a
- rework package description
[Peter: move under Libraries->Networking]
Signed-off-by: Davide Viti <zinosat@tiscali.it>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The sparse_super feature is more efficient in terms of speed and
available space, so set it by default if supported, i.e. for revision 1.
This gives a huge speed gain for large resize2fs operations, especially
for expansion.
Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Installing libraries in a subdirectory of /usr/lib leads to no end of
trouble. It requires either setting a RUN_PATH in the ELF files linked
with it or adding the path to ld.so.conf and calling ldconfig on the
target.
So to simplify things, put everything in /usr/lib instead of
/usr/lib/mysql
[Thomas:
- tweak commit title.
- also remove ld.so.conf handling in mysql.mk, since it is no longer
necessary.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In Buildroot, the selection of a package from a Config.in level and
from a Makefile level are completely disconnected. This can lead to
issues where the build of a package is triggered at the Makefile level
due to the package being listed in another package <pkg>_DEPENDENCIES
variable, even if that package is not enabled in the configuration.
This has for example been the case recently with python-can having
'python' in its <pkg>_DEPENDENCIES, while python-can could be enabled
when Python 3.x is used, in which case the 'python' package should not
be built.
To detect such issues more easily, this patch adds a check in the
package infrastructure. When the build process of a package is being
triggered, we verify that the package is enabled in the
configuration. We do this check in the "configure" step, since this
step is the first common step between the normal download case and the
"local site method" / "package override" case.
[Thomas: adjust the error message as suggested by Yann, to take into
account the fact that the problem might not be in a direct reverse
dependency, but in something higher up in the tree of reverse
dependencies.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Of host-gettext, we only build the tools. however some of those tools
have a --color option, which needs libxml2.
If the libxml2 development files are missing on the host, a bundled
subset of libxml2 is used, and all seems OK. But if they ar epresent,
then the host libxml2 is used. On some distros, lbxml2 is linked with
liblzma. And if we happend to _then_ build our host-liblzma, we may have
a conflict later when trying to run any of the host-gettext tools.
Always build host-gettext with our own host-libxml2 which is not linked
with liblzma.
Fixes https://bugs.busybox.net/show_bug.cgi?id=7886
Signed-off-by: Ignacy Gawędzki <ignacy.gawedzki@green-communications.fr>
[nicolas: added extended commit message]
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
[yann.morin.1998@free.fr: rebase; add comment; enhance commit log]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Unionfs changed its meta directory from .unionfs to .unionfs-fuse with the
unionfs -> unionfs-fuse rename. The rename later got reverted everywhere
but the meta directory, so now unionfs doesn't find the whiteout files from
older releases.
Revert back to the pre-1.0 behaviour to fix this.
Patch merged upstream:
93c2f9bd8b
[Thomas: add reference to the upstream commit, now that the patch has
been merged.]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now uses the new mbedtls package, and requires zlib.
Rename the SSL option description to TLS, but keep the same symbol
name to avoid pointless legacy.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add the mbed TLS library, formerly known as PolarSSL.
The 2.0+ version can live side-by-side with polarssl since it was
renamed, hence can be added with no conflict.
Use the Apache-2.0 license variant since it's somewhat more flexible,
the codebase is the same as the GPLv2 variant, just copyright
headers/license file changed.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The project moved to github, so point the homepage and download URL
there.
[Thomas:
- Remove comment "Switch to github helper on bump" since we clearly
don't want to switch to the github helper if they continue to
upload release tarballs.]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The project moved to github, so point the homepage and download URL
there.
[Thomas:
- Remove comment "Switch to github helper on bump" since we clearly
don't want to switch to the github helper if they continue to
upload release tarballs.
- Adjust comment in the .hash file for clarity.]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
xdotool is a command-line X11 automation tool.
http://www.semicomplete.com/projects/xdotool
[Thomas:
- fix <pkg>_LICENSE, as noticed by Baruch
- use $(TARGET_MAKE_ENV).]
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The dependency on linux is automatically added by the kernel-module
infrastructure, so there is no need to explicit add it in the emlog
package.
Thanks to Arnout for spotting the issue.
Reported-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package depends on the radeon driver from libdrm and depends on
DRI support in xserver_xorg-server, to achieve this we select the
Radeon mesa3d DRI driver.
Fixes:
http://autobuild.buildroot.net/results/9da/9da4ffdf1c4ec78ae37322e253cb769340116035
Signed-off-by: Lada Trimasova <ltrimas@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
----
Changes v1 -> v2:
- use github helper (thanks to Jörg Krause)
Changes v2 -> v3:
- add c++ dependency (suggested by Thomas Petazzoni)
- fix linking problem with builtin zlib (linking code
with/without '-fpic' compiled, see e.g. [2]), workaround by selecting
buildroot zlib package (failure detected by Thomas Petazzoni [2])
[1] https://cmake.org/pipermail/cmake/2006-March/008482.html
[2] http://lists.busybox.net/pipermail/buildroot/2015-December/146859.html
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Other packages will look for eigen3.pc to detect the presence of eigen3.
eigen3.pc is usually installed by eigen's cmake buildsystem, but we do a
manual install to not depend on host-cmake just to install header files.
But in doing so, we forgot to install the .pc file.
Manually sed the source .pc.in to generate the final .pc file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In Kconfig, when there is an item (like a comment) between a symbol and
its dependees, then the indentation is not in effect.
Move the symbol to the top of the file to guarantee the indentation in
menuconfig.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
In Kconfig, when there is an item (like a comment) between a symbol and
its dependees, then the indentation is not in effect.
Move the symbol to the top of the file to guarantee the indentation in
menuconfig.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
In Kconfig, when there is an item (like a comment) between a symbol and
its dependees, then the indentation is not in effect.
Move the symbol to the top of the file to guarantee the indentation in
menuconfig.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
In Kconfig, when there is an item (like a comment) between a symbol and
its dependees, then the indentation is not in effect.
Move the symbol to the top of the file to guarantee the indentation in
menuconfig.
In this case, it means the gstremaer1 plugins are not indented below the
main gstreamer1 prompt.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
In Kconfig, when there is an item (like a comment) between a symbol and
its dependees, then the indentation is not in effect.
Move the symbol to the top of the file to guarantee the indentation in
menuconfig.
In this case, it means the gstremaer plugins are not indented below
the main gstreamer prompt.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
In Kconfig, when there is an item (like a comment) between a symbol
and its dependees, then the indentation is not in effect.
Move the symbol to the top of the file to guarantee the indentation in
menuconfig.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
connman uses execinfo.h to dump a backtrace in case of failure.
execinfo.h is optional in uClibc, so we had a patch that conditonally
disabled backtraces for uClibc when it was missing execinfo.h
However, musl is also entirely lacking execinfo.h.
Add a proper patch that checks for execinfo.h at ./configure time. This
will no longer make any assumption on the C library that is being used.
Fixes:
http://autobuild.buildroot.org/results/f6e/f6ee8ab3a6300f1f527f9e92b8c2ec81e63afb27/http://autobuild.buildroot.org/results/96b/96b78bb644ed4ef3493782521b17e3b2113a405f/
...
Note that there might be other issues with musl; this patch only fixes
the execinfo.h one.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
pinentry can use libsecret when available, so we should handle this
optional dependencies properly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
pinentry configure.ac uses PKG_CHECK_MODULES() and also manual calls
to pkg-config, to detect the availability of some libraries, so we
need to depend on host-pkgconf.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we only support two levels of stach-smashing protection:
- entirely disabled,
- protect _all_ functions with -fstack-protector-all.
-fstack-protector-all tends to be far too aggressive and impacts
performance too much to be worth on a real product.
Add a choice that allows us to select between different levels of
stack-smashing protection:
- none
- basic (NEW)
- strong (NEW)
- all
The differences are documented in the GCC online documentation:
https://gcc.gnu.org/onlinedocs/gcc-4.9.2/gcc/Optimize-Options.html
Signed-off-by: Steven Noonan <steven@uplinklabs.net>
[yann.morin.1998@free.fr:
- rebase
- add legacy handling
- SSP-strong depends on gcc >= 4.9
- slightly simple ifeq-block in package/Makefile.in
- keep the comment in the choice; add a comment shen strong is not
available
- drop the defaults (only keep the legacy)
- update commit log
]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- only show the choice if the toolchain has SSP support
- add details for the BR2_SSP_ALL option that it has a significant
performance impact.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ustr now unconditionally builds a shared library, so we have to mark
it as not available for static-only builds. The only reverse
dependencies of ustr is libsemanage, which was anyway already not
available for pure static builds.
Fixes:
http://autobuild.buildroot.org/results/734/734975f6ac041e8aece07205c0b8966fe51e7df1/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
All packages use BR2_TOOLCHAIN_HAS_SSP to determine whether they can
use SSP suppport or not, except stunnel. Therefore, this commit makes
stunnel consistent with other packages. This is also necessary in
preparation to the removal of BR2_ENABLE_SSP in favor of a choice
between various SSP options.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Chromium OS verified boot utilities.
Needed for signing kernel images and manipulating bootable
partitions on media intended for Chromebooks.
Signed-off-by: Alex Suykov <alex.suykov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Following commit broke building for arc, metag, nios2, or1k and tile:
34683e3926/
Now we're fixing that breakage with a back-port of upstream fix:
dd1a80c8d2/
Mentioned fix will be a part of the next strace release,
i.e. this patch must be removed on strace version bump.
Fixes http://autobuild.buildroot.org/results/f25/f25c23003ed282b935f5289c944615860265364a
and alike, see http://autobuild.buildroot.org/?reason=strace-4.11
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
upmpdcli version 0.13.1 requires libupnpp version 0.13.1 to build successfully.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The nodejs options incorrectly started BR2_BR2_xxx. This change corrects
the name for 0.10.x releases to BR2_PACKAGE_NODEJS_0_10_X
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
No sleep is required for the restart and force-reload operations to
succeed.
Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix various messages displayed by these scripts:
- make start-stop-daemon quiet in order to avoid extra messages like
"stopped /usr/sbin/dhcpd (pid 174)" being output between the command
description and its result,
- fix the script names in the usage strings.
Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The dhcpd daemon does not require network interface names to be
specified on the command line.
>From dhcpd(8):
"The names of the network interfaces on which dhcpd should listen for
broadcasts may be specified on the command line. This should be done
on systems where dhcpd is unable to identify non-broadcast interfaces,
but should not be required on other systems. If no interface names
are specified on the command line dhcpd will identify all network
interfaces which are up, eliminating non-broadcast interfaces if
possible, and listen for DHCP broadcasts on each interface."
dhcpd exits with "Not configured to listen on any interfaces!" only if
no requested (those in INTERFACES, or all if empty) non-broadcast
interfaces matching the subnet declarations in dhcpd.conf are up.
Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add an OPTIONS configuration variable in order to make it possible to
pass custom extra options to dhcpd. This keeps the systemd support
consistent with the SysV init script.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
Reviewed-by: "Maxime Hadjinlian" <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add an OPTIONS configuration variable in order to make it possible to
pass custom extra options to dhcpd.
Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The S80dhcp-relay init script has configuration variables like
INTERFACES whose contents have to be passed to the daemon. These
variables are initialized as empty strings, but some of them are not
allowed to be empty and there was no means of filling them apart from
creating a root FS overlay to overwrite these scripts.
This commit adds support for reading dhcrelay under /etc/default/ to
set these configuration variables.
[Thomas: adapt to patch only S80dhcp-relay, since S80dhcp-server has
already been changed by previous commits.]
Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit does misc improvements to the S80dhcp-server init script:
- Use more variables: NAME, DAEMON, CFG_FILE
- Read the configuration file in /etc/default/ in a more usual way
(as done in S21rngd for example)
- Remove leftover dhcpd3 string in the stopping action.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
All daemons that read a file from /etc/default/ have it named just
after the name of daemon, without any extension. This commit fixes the
dhcp package to do the same.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also add a hash file.
The extraction method had to be changed, since the WAD file for this
version is not distributed as a stand-alone file, but comes inside a
2-part DOS self-extracting zip archive.
Signed-off-by: Rodrigo Rebello <rprebello@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Even though libnspr uses a configure script, it does look at __GLIBC__
and other macros to determine whether certain C library features are
available or not. Such things fails completely with the musl C
library, since it doesn't define __GLIBC__.
To fix this, we borrow some logic from Alpine Linux, which consists in
explicitly specifying which features are available in the musl C
library.
Fixes:
http://autobuild.buildroot.org/results/ddd/dddd032232126f1e476e6aea2c6a32e9cd1ddfae/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The autofs configure script does a number of weird things.
First, instead of using the default search path for AC_CHECK_PROGS(),
it overrides it its own search path, ignoring the PATH environment
variable. Due to this, autofs fails to find flex even though flex is
available in the PATH. Fortunately, the authors provided a --with-path
configure option which allows to override this search path.
In addition, the configure script is checking on the build machine
that a number of programs are available, while those programs are in
fact only needed on the target. The one causing build issues is
modprobe, because it may not necessarily be installed on build
machines, so we explicitly tell autofs that modprobe is located in
/sbin/modprobe. It might be necessary to provide additional values for
other programs, as we discover other problems.
Fixes:
http://autobuild.buildroot.org/results/447/4479382b2d4d762991cab2e93fd08ad6160c2921/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- move from Libraries/Crypto to System tools in menuconfig
- add patch to fix build with uClibc
- use 'select' for openssl rather than a 'depends on'
- propagate trousers dependencies
- add <pkg>_LICENSE and <pkg>_LICENSEFILES
- link against libiconv when needed, fixing !locale builds
- explicitly disable pkcs11 support, since it is not handled by
tpm-tools.mk currently.]
Signed-off-by: Al West <al.west@v-nova.com>
Signed-off-by: Noé Rubinstein <nrubinstein@aldebaran.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- use a 'select' instead of a 'depends on' for openssl
- select libiconv when locale support is not available, otherwise the
build fails due to missing iconv.h
- disable on BR2_STATIC_LIBS configurations as it doesn't build. It
could be made to build by patching the trousers Makefile.
- add missing dependency on thread support in the toolchain
- add Config.in comment about the thread and dynamic library
dependencies.
- add missing <pkg>_LICENSE and <pkg>_LICENSE_FILES variables.]
Signed-off-by: Al West <al.west@v-nova.com>
Signed-off-by: Noé Rubinstein <nrubinstein@aldebaran.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The shareware WAD file is also supported by Chocolate Doom.
Signed-off-by: Rodrigo Rebello <rprebello@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Chocolate Doom is a set of conservative source ports for Doom, Heretic,
Hexen and Strife, with a philosophy of preserving the look, feel, and
bugs of the vanilla versions of each.
http://www.chocolate-doom.org
Signed-off-by: Rodrigo Rebello <rprebello@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Mesa32 radeon driver doesn't depend on x86 and can be built for all architectures.
Signed-off-by: Lada Trimasova <ltrimas@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To use webchannel in an application qwebchannel.js is needed but this file was not
installed.
Signed-off-by: Julien Corjon <corjon.j@ecagroup.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix segmentation fault in node.js when using uClibc-ng.
This patch fixes bug #8296, see
https://bugs.busybox.net/show_bug.cgi?id=8296.
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
nodejs is only selected for mips hard float however the comment is
displayed for hard and soft float. Correct this by adding the missing
!BR2_MIPS_SOFT_FLOAT to the comment.
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove 0.12.9 to rationalise the number of nodejs releases supported by
buildroot. Going forward buildroot will only support the latest release
of nodejs and the 0.10.x branch for armv5 support.
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Replace 4.2.3 with 5.3.0. 5.3.0 is the current Stable release. See
https://nodejs.org/en/blog/release/v5.3.0 for details on the release.
Copied 4.2.3 patched to 5.3.0 with the following exceptions:
- Removed 0004-fix-arm-vfpv2.patch, committed upstream and included in
5.3.0. See https://github.com/nodejs/node/commit/84dea1bd0c
- Added 0004-Fix-va_list-not-declared.patch, fix for a new bug. This
has already been fixed upstream but is not in 5.3.0
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also:
- Remove no longer needed patch (merged upstream).
- Adapt vnstat.mk to the new autotools-based build system.
- Include patch to improve gd library usability check + add
configure option to explicitly disable that check.
Signed-off-by: Rodrigo Rebello <rprebello@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: use "br" as the version suffix instead of "-br" so that the
final version string is "0.5-br" and not "0.5--br".]
Signed-off-by: Viacheslav Volkov <sv99@inbox.ru>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
List all jQuery plugins in a dedicated menu and remove
uneeded jQuery selection.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As of Linux kernel commit ea4d1a8 "powerpc/configs: Replace
pseries_le_defconfig with a Makefile target using merge_config" some
kconfig defconfigs (one so far: "pseries_le_defconfig") can be
generated using "make <defconfig>" and they do not exist on disk as a
single defconfig file.
This causes buildroot's build to fail for those configs with:
'arch/powerpc/configs/pseries_le_defconfig' for 'linux' does not exist
To handle this case and keep the makefile steps as simple as possible,
introduce a new package variable, *_KCONFIG_DEFCONFIG, that can be
used to indicate that a defconfig rule is being used, rather than a
file.
This allows the rule that generates the .config file to use either the
provided file (by copying) or a generated defconfig (by running "make
<defconfig>") as its starting point. merge_config.sh can then be run the
same way in either case, using .config as both input and output.
Note that merge_config.sh is now modifying .config in-place but this
is safe because it uses a temporary copy while making changes.
This patch introduces the new variable but does not make use of it.
Use of the new variable will be introduced in separate patches.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
[yann.morin.1998@free.fr:
- include all the other kconfig-package hunks into this one patch
- do not transform the 'echo "..."; exit 1' into $(error ...) calls
- use a make $(if)-block instead of a shell if-block to copy the file
or run make (like is done to check the kconfig snippets)
- misc typoes and rephrasing in the commit log
- do not force the _defconfig suffix in the infra (Thomas)
]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We already had a patch to allow us to explicitly pass the location of
the sane-config script, but wine's configure script uses several other
*-config scripts. This commit extends the wine patch and wine.mk to
explicitly pss the location of all *-config scripts that may be used
by wine.
The wine patch has been submitted upstream.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Due to a missing header inclusion, the build of ltrace of sparc fails
with the following error:
plt.c: In function 'sym2addr':
plt.c:33:12: error: dereferencing pointer to incomplete type
return sym->enter_addr;
^
plt.c:34:1: warning: control reaches end of non-void function [-Wreturn-type]
}
This commit fixes that by adding a patch to the ltrace code base.
Fixes:
http://autobuild.buildroot.org/results/55c/55ce618dbe1b2867e5738d90afb2eb67c19200e4/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When the musl C library is used, the __GNU_LIBRARY__ symbol is not
defined, so the lockdev code doesn't know what to do. To work around
this, we explicitly pass __GNU_LIBRARY__ when building with musl, this
musl provides what's needed for lockdev to build, as if we were
building against glibc.
Fixes:
http://autobuild.buildroot.org/results/9db/9db4ab40955d3af0027e141245d73ee6c614fb1f/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A daemon which handles passwd, group and host lookups for running
programs and caches the results for the next query. This package is
intended to replace glibc nscd. Presently, glibc nscd is not installed
by Buildroot.
unscd depends on glibc because it relies on glibc function
__nss_disable_nscd.
nscd.conf is taken from glibc with unused configurations removed.
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Doug Kehn <rdkehn@yahoo.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Installs /etc/nfsmount.conf on the target, mainly to be able to configure the
the NFS version that mount.nfs uses by default. Without this ability you are
likely to encounter mount errors when automounting directories from NFS
version 3 servers.
Signed-off-by: Jonathan Ben Avraham <yba@tkos.co.il>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested on i.MX6 using NFS mounts only. Not tested with DAS mounts as
of this commit.
[Thomas:
- remove the "# rpcbind" comments on the thread and mmu dependencies,
since we don't select rpcbind. The thread and mmu dependencies are
still needed though, since autofs uses pthread_*() functions and
fork().
- Remove "Requires a toolchain with native RPC." in the Config.in
help text and instead add a proper Config.in comment about the
thread and RPC dependency.
- Add patch to fix building with uClibc, taken from OpenEmbedded.]
Signed-off-by: Jonathan Ben Avraham <yba@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- update to the latest github version, which has a number of
fixes/improvements compared to the latest tag.
- add a patch to fix the build of the kernel module with recent
kernel versions (>= 3.19).
- use $(INSTALL) -D with a full destination path.
- rewrap Config.in help text, lines were too long.]
Signed-off-by: Joris Lijssens <joris.lijssens@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Patch upstream so remove it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also use CANTARELL_VERSION_MAJOR in SITE as reported by Baruch.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
Make sure that all transferred files use only path names from inside the
transfer. This makes it impossible for a malicious sender to try to
make the receiver use an unsafe destination path for a transferred file,
such as a just-sent symlink.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for the Openbox Windows Manager.
[Thomas:
- don't mention MMU in the Config.in comment.
- wchar was forgotten in the Config.in comment.
- the dependency of the comment on thread should be "depends on
!BR2_TOOLCHAIN_HAS_THREADS" so that the comment is shown when
thread support is *not* available.
- add missing select of BR2_PACKAGE_XLIB_LIBXFT and
BR2_PACKAGE_XLIB_LIBXRENDER which are needed for pango to have xft
support, otherwise the build fails with "configure: error: Package
requirements (pango >= 1.8.0 pangoxft >= 1.8.0) were not met:"
- remove useless empty newline in the hash file
- add missing dependency on host-pkgconf, which is needed since
the configure.ac uses PKG_CHECK_MODULES.]
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
New release fixes a number of bugs, including some needed for talking
to modern AMI BMC firmware as shipped on some POWER8 systems.
Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also remove no longer needed patch (merged upstream before the release
of v2.1).
Signed-off-by: Rodrigo Rebello <rprebello@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add package luvi version v2.3.5.
luvi extends LuaJIT with asynchronous I/O and several optional modules to run
Lua applications and build self-contained binaries.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Enable developer mode to skip the shared library check in configure and
avoid further patching.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Version 2.5 of wpa_supplicant introduces the config option
CONFIG_BUILD_WPA_CLIENT_SO to enable building wpa_client as shared library.
We need to add a patch from upstream to fix a runtime error with
libwpa_client.so:
Error relocating /usr/lib/libwpa_client.so: bin_clear_free: symbol not found
[Thomas: renumber patch.]
Cc: Martin Bark <martin@barkynet.com>
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Reviewed-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package is also compatible with Berkeley DB v2 or higher:
https://metacpan.org/source/PMQS/DB_File-1.835/Changes
1.50
DB_File can now build with either DB 1.x or 2.x, but not both at
the same time.
[Thomas: adjust Config.in help text accordingly.]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This allow to keep backward compatibility with older
defconfig files that used BR2_PACKAGE_EFL.
Don't add Config.in.legacy entry for libefl since it's
not part of any Buildroot release.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As discussed on the list move the last remaining package
in package/efl subdirectory to package/ directory.
- move the efl dependency to libefl.
- Set LIBEFL_VERSION with the version number directly.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The upstream name is elementary so use it.
Even if this package provide libelementary.so, it also provide
elementary_codegen, elementary_run and elm_prefs_cc tools.
Add a legacy entry.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As discussed on the list the two remaining packages in
package/efl subdirectory will be moved to package/
directory.
- Add the efl dependency to libelementary.
- Set LIBELEMENTARY_VERSION with the version number
directly.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
They're broken for the latest version and directfb upstream is gone.
cle266 is an old chipset for AMD K7 (32 bit) athlons with integrated
graphics - very odd hardware.
unichrome is another VIA graphics standalone chip/chipset used for some
odd video cards and VIA CPUs (x86-based: C7, Nano and so on).
Add options to legacy as well. Fixes:
http://autobuild.buildroot.net/results/ab9/ab9a6dd044b5f3e8e42629a2aaf598fd0e0357ed/
Signed-off-by: Gustavo Zacarias <gustavo.zacarias@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
See the conclusion about external toolchains during the Buildroot
meeting [1]:
"In the future, we stick to a single external toolchain version. The
Kconfig symbol should not encode the version (avoid legacy handling)"
[1] http://elinux.org/index.php?title=Buildroot:DeveloperDaysELCE2015#Report
Remove old ADI toolchain handling in glog, openpgm and zeromq.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
See the conclusion about external toolchains during the Buildroot
meeting [1]:
"In the future, we stick to a single external toolchain version. The
Kconfig symbol should not encode the version (avoid legacy handling)"
[1] http://elinux.org/index.php?title=Buildroot:DeveloperDaysELCE2015#Report
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
See the conclusion about external toolchains during the Buildroot
meeting [1]:
"In the future, we stick to a single external toolchain version. The
Kconfig symbol should not encode the version (avoid legacy handling)"
[1] http://elinux.org/index.php?title=Buildroot:DeveloperDaysELCE2015#Report
Remove old CS toolchain handling in pixman and liquid-dsp.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Move to baseline package/
It doesn't really require x11r7 infrastructure and is in fact needed by
libepoxy which can be made x11r7-less.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bumping to brand new stable version 1.8
Upstreamed patches are dropped, sane patch is rebased.
Adding libpcap, pulseaudio and samba4 as soft dependencies.
sfnt2fon moved to its own subfolder and needs to be built in host-wine.
Signed-off-by: André Hentschel <nerv@dawncrow.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- replace patch 0001 fixing autoreconf by a simpler patch that simply
drops the -Wall and -Werror flags passed to automake.
- reformat the two patches using Git
- drop the "uclibc || glibc" dependency inherited from libv4l, since
libv4l has now been fixed to build on musl.
- drop the hook work arounding a build issue around man pages, and
replace by a patch that completely disables the build/installation
of documentation.
- change license to LGPLv2.1+, as noted in the COPYING file.
- drop --enable-shared=yes, since it is already passed by the
autotools-package infrastructure]
Signed-off-by: Viacheslav Volkov <sv99@inbox.ru>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- rename from comix_cursors to comix-cursors
- change prompt from comix to comix-cursors in order to match the
package name
- use <pkg>_STRIP_COMPONENTS instead of overriding the extract
commands.
- the license is GPLv3 according to the project website.]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- rename from obsidian_cursors to obsidian-cursors
- change prompt from obsidian to obsidian-cursors in order to match
with the package name.]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: change <pkg>_LICENSE to match the license identifier used for
other packages, such as 'liberation'.]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Needed for these new Kodi addons:
kodi-screensaver-asterwave
kodi-screensaver-cpblobs
kodi-screensaver-matrixtrails
kodi-screensaver-planestate
kodi-visualisation-fountain
[Thomas:
- don't pass LIBSOIL_CFLAGS since this variable no longer exists.
- pass TARGET_CONFIGURE_OPTS on the right hand side of make for the
install steps, like was done for the build step.]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Removed call to pkgconf because epoxy configure now uses pkgconf
itself to find egl headers:
d56f21c494
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
