It now requires json-glib as dependency so adjust.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a new explicit option for the dependency-less timecode plugin.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's new for 1.10.0, add an explicit option for the webrtc plugin.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In preparation to the addition of a webrtc GStreamer plugin that will
have to select the webrtc-audio-processing package (and therefore
inherits its dependencies), this commits adds a
BR2_PACKAGE_WEBRTC_AUDIO_PROCESSING_ARCH_SUPPORTS blind option to avoid
duplicating the architecture dependencies of this package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's new for 1.10.0, add an explicit option for the fdkaac plugin.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
[Thomas: add missing dependencies for the fdk-aac select, as noticed
by Baruch Siach.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In preparation to the addition of a fdk-aac GStreamer plugin that will
have to select the fdk-aac package (and therefore inherits its
dependencies), this commits adds a BR2_PACKAGE_FDK_AAC_ARCH_SUPPORTS
blind option to avoid duplicating the architecture dependencies of
this package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's a new feature for 1.10.0+, however it doesn't have an
enable/disable configure switch so just handle the dependency.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove gstconfig.h compatibility kludge since it has been
fixed/reinstated upstream.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Like for cyclictest (rt-test)[1], linux-user/syscall.c use the
definition of the "struct sigevent" from Glibc/uClibc which doesn't
build with musl libc.
So, disable Qemu user-land emulation for musl toolchains.
Fixes:
http://autobuild.buildroot.net/results/b27/b277e668d9e22b624416bf46f6ccba802acd257e
[1] 43bffa59e7
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
U-Boot KConfig allows to take care of CONFIG_OLD_SUNXI_KERNEL_COMPAT
in order to properly start the kernel (Error: unrecognized/unsupported machine ID)
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This defconfig has not been updated in any significant way since 2011,
when Peter moved it to use a mainline kernel. It's now using an
ancient 3.0 kernel, and a vendor-specific U-Boot version that fails to
build with various "undefined reference" errors:
undefined reference to `show_boot_progress'
undefined reference to `image_print_contents'
undefined reference to `wait_ms'
So it's time to get rid of the defconfig for this platform.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 1ba7b6a4f1.
Adding -DCROSS_COMPILE_ARM=ON to _CONF_OPTS will not fix the build:
/home/buildroot/br2/output/host/usr/arm-buildroot-linux-gnueabihf/sysroot/usr/include/gnu/stubs.h:7:29:
fatal error: gnu/stubs-soft.h: No such file or directory
because cross-compiling x265 is only supported for soft-float abi:
583fc74fc0/source/CMakeLists.txt (CMakeLists.txt-211)
Fixes
http://autobuild.buildroot.net/results/6ec/6ec75cc176e05bfc6287dc54fa1a53e0ffc0521d/
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use the common mxs genimage script instead of a custom one.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a standard genimage script for the MXS processors (MX23 and MX28).
Based on the common scripts for the other imx devices:
board/freescale/common/genimage.cfg.template
board/freescale/common/post-image.sh
This makes it easier to add new MX23/MX28 boards configurations into
Buildroot.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove patches now upstream.
Disable new optional features: webrtc and opus.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Stefan Nickl <Stefan.Nickl@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 0b6b67f34d ("jamvm: add patch to
fix musl build") introduced a patch to fix the jamvm build with the
musl C library. While the commit log pretends that the build was still
working with uClibc, it is not correct: it no longer builds fine with
uClibc on i386/x86_64, because the Buildroot default configuration for
uClibc doesn't enable <fenv.h> support.
Therefore this commit adapts the patch to use <fenv.h> if available
(which is the case with musl), and otherwise fall back to
<fpu_control.h>, which is available in uClibc.
Thanks to Waldemar for the investigation.
Fixes:
http://autobuild.buildroot.net/results/325a50d15e1836b31df4e84ba83b296abfb73041/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ser2net configure script provide an option to disable threads support,
use it.
Fixes:
http://autobuild.buildroot.net/results/6bc/6bc0f99917c2069a1614f4cfcaa98af1b21762e4
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas: use --{with,without}-pthreads instead of --with-pthreads={yes,no}.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Even though privoxy has some conditional code to handle configurations
without threads, it is not properly handled everywhere, leading to a
build failure. Since this package is unlikely to be used in
non-threaded environment, just disable it for non-threaded
configurations.
Fixes:
http://autobuild.buildroot.net/results/fae7a41d110ed6c4d62c77873229d069d8b65986
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The kvm-unit-tests package defines a KVM_UNIT_TESTS_ARCH variable, but
never used it. Due to this, on PowerPC64, we were passing an incorrect
value, causing a build failure.
In addition, once the KVM_UNIT_TESTS_ARCH is used, it appeared that
its value for x86_64 was incorrect, due a typo: it was x86_84 instead
of x86_64.
Fixes:
http://autobuild.buildroot.net/results/16836c02f4d1ab5df6b2e21a4fcdbbf4a7542f22/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reenables the use of 2.27 for microblaze.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We don't use the default implicit rules that are added by make, so
they just slow down the Makefile processing. The default implicit
rules can be removed by defining an empty .SUFFIXES: target.
This speeds up the start of the build on my machine from 5.6s to
4.9s.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Brings in a fix about externded attributes (xattrs).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This configuration for the KwikByte KB9202 was added back in July 2008
(commit e27fef5183), and was never
updated since then. It still uses a 2.6.38 kernel, with the out of
tree patches from the former AT91 kernel maintainer. The board has
been discontinued according to its page at
http://www.kwikbyte.com/KB9202.html.
This defconfig no longer builds since the switch to gcc 5.x as the
default. Therefore, it's time to get rid of this defconfig.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We use makedevs to create device nodes in the target rootfs. However,
this can be called several times, e.g. when building several filesystem
images or when rebuilding. When makedevs is called the second time, the
device node already exists so mknod() errors out.
This wasn't noticed before because fakeroot's mknod() wrapper
(incorrectly) does _not_ error out when the file exists already. Now
we switched from fakeroot to pseudo, the problem becomes apparent.
Before creating the device node, check if it already exists and if so,
if it has the correct device type and number. Change of mode and
ownership is still done.
This approach was preferred over removing the target files before
creating them, which would be simpler. However, when e.g. a file exists
as a normal file and makedevs specifies it as a device node, that
really is an error so we should detect it.
The other types don't have to be changed. The 'd' (directory) type is
already OK because it already only creates directories if they don't
exist yet. The 'f' (file mode) and 'r' (recursive) types only operate
on files and directories that exist already.
Patch also sent upstream to busybox.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reported-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In upstream busbyox, the code to create devices has been simplified:
the code for a single and for multiple devices is no longer duplicated.
Since we are going to change the device creation code next, it's
convenient to have only one copy to modify.
There are two behavioural changes with this, but they were introduced
silently together with other commits in upstream busybox.
- When mknod() fails, the chmod was still done. This is pointless so it
is no longer done now.
- There was a check for mode != -1; however, a mode of -1 would not
have worked anyway because all bits would be set for mknod(), which
would fail. So this check is redundant.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Fabio Estevam <festevam@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
czmq uses readdir_r(), which has been marked as deprecated in glibc
2.24, and czmq uses -Werror which causes the warning to be turned into
an error that aborts the build.
This commit fixes that by removing -Werror. Long-term, we might want
to upgrade czmq to a newer version, since they've removed the use of
readdir_r() in commit 2594d406d8ec6f54e54d7570d7febba10a6906b2. But
getting rid of -Werror is anyway always a good idea in Buildroot.
Fixes:
http://autobuild.buildroot.net/results/f6e4b8ed8571fdcf30eecae121dd11dfdef50799
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ustream-ssl has support for polarssl and cyassl
but since polarssl is made obsolete by mbedtls and cyassl
is not present in buildroot, we have not added support for it.
Signed-off-by: Rahul Bedarkar <Rahul.Bedarkar@imgtec.com>
Signed-off-by: Rahul Jain <Rahul.Jain@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This fixes the build on machines that do not have attr development files
installed.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Pseudo is not python3 friendly. It causes build failure on distros using
python3 as default python interpretor.
./maketables enums/*.in
File "./makewrappers", line 327
return """/* This function is not called if pseudo is configured --enable-force-async */
^
TabError: inconsistent use of tabs and spaces in indentation
File "./maketables", line 76
print "Flags: set for %s" % self.name
^
SyntaxError: Missing parentheses in call to 'print'
make[2]: *** [Makefile:150: wrappers] Error 1
make[2]: *** Waiting for unfinished jobs....
make[2]: *** [Makefile:147: tables] Error 1
Those patches make pseudo works with python2 and python3.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- 0002 patch tweaked. There is a hunk that has been removed upstream by
this commit:
082210c7a8
- Patches 0004, 0005 and 0006 were backported from upstream and now they
are included in this release, so drop them.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Set the PREFIX to avoid installing files in [...]/usr/local/.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
