Finally there's working ARC port of glibc thanks to Vineet and Cuper!
This port is based on pretty recent glibc's master branch and ARC
changes are being reviewed now in glibc's mailing list.
Thus we again have to use sources from our GitHub but as soon as there's
a glibc release with our patches applied we'll switch to upstream releases
and will drop our glibc GitHub repo alltogether.
Note now we cut tags in glibc repo simultaneously with tags
in Binutils and GCC repos and so to make sure everything works in the best
way we plan to update glibc tag together with Binutils and GCC.
Also note as of today ARCompact (AKA ARCv1 ISA) is not supported in glibc
but we plan to fix it soonish so for now we make glibc intentionally
dependent on archs38.
Also note we are not creating directory "2.26" because all patches for glibc
ver 2.26 applies to arc glibc port.
Signed-off-by: Evgeniy Didin <didin@synopsys.com>
CC: Alexey Brodkin <abrodkin@synopsys.com>
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CC: Waldemar Brodkorb <wbx@openadk.org>
CC: Romain Naour <romain.naour@gmail.com>
Cc: Cupertino Miranda <cmiranda@synopsys.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Anton Kolesov <akolesov@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some cores are not supported by upstream gcc.
Use the newly-introduced symbol to state so, rather than have the
exclusion in the toolchain choice.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some cores are not supported by upstream gcc.
Use the newly-introduced symbol to state so, rather than have the
exclusion in the toolchain choice.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upstream gcc does not have support for C-Sky, and we do not have a
vendor tree for it either (yet?).
Use the newly-introduced symbol to state so, rather than have the
exclusion in the toolchain choice.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some architectures or specific cores do not have support in upstream
gcc. Currently, they are individually listed as exclusions in the
toolchain choice.
This poses a maintainance burden, as the knowledge about what gcc
version supports what architecture is split across many places: the
toolchain choice, the gcc version choice, the external toolchains.
As a first step, add a blind option that architectures or individual
cores may select to indicate they lack support in our internal backend.
Actual use of the option will come in followup patches.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since glibc 2.26, kernel headers >= 3.10 are needed on powerpc64le [1].
In order to prepare the glibc bump to this version, we don't allow to
build a Buildroot toolchain with kernel headers older than 3.10.
[1] https://sourceware.org/git/?p=glibc.git;a=commit;h=c2ff5ec13fca1bdd1cd646a0260808386d7bd7ff
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
GDB has been updated to 8.0 version in the release.
https://releases.linaro.org/components/toolchain/binaries/6.4-2017.08
Tested with qemu_aarch64_virt_defconfig.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
GDB has been updated to 8.0 version in the release.
https://releases.linaro.org/components/toolchain/binaries/6.4-2017.08
Tested with qemu_arm_vexpress_defconfig.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When using an external toolchain that was built with Buildroot and a
merged /usr, the dynamic linker is actually in /usr/lib.
But the check_glibc macro limits the depth it is looking for the dynamic
linker, and misses it when it is in /usr/lib because it is too deep.
We could fix that in two ways: increase the depth in which we look
for it, or follow symlinks. We choose the second solution.
Signed-off-by: Cam Hutchison <camh@xdna.net>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Commit 1b974425 (MIPS: add support for M6201 cores) explained that the
new core was not supported by upstream gcc, and as of gcc-8-trunk
that's still the case.
Ditto for 3cfbeb83 (MIPS: add support for P6600 cores).
This means that we currently allow to build an internal tolchain for
those cores, yet we have no suitable gcc version.
Disable the internal backend in this case.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since 392b0a26f5 (toolchain-external: default BR2_TOOLCHAIN_EXTERNAL_PATH
to empty), calling 'make clean' or similar can yield a spurious stderr
message:
dirname: missing operand
Try 'dirname --help' for more information.
Which is definitely baffling and unsettling...
It turns out that it is pretty trivial to reproduce, and this defconfig
is just enough:
$ cat my-defconfig
BR2_TOOLCHAIN_EXTERNAL=y
$ make BR2_DEFCONFIG=$(pwd)/my-defconfig defconfig
$ make clean
dirname: missing operand
Try 'dirname --help' for more information.
[--snip--]
This is because the cross-compiler is not found in the PATH (and for
good reasons, I don't have it in the PATH, not even at all).
So, when the cross-compiler is not found in the path, we simply
continue as if all was good, and postpone the check to much later,
when we try to copy the toolchain libs...
So, use a make construct rather than calling to the shell: $(dir ...)
does not whine if passed nothing.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The big.LITTLE configurations can be optimised for by gcc, and a few
users wonder what they should choose when they have such CPUs.
Add new entries for those big.LITTLE configurations.
Note: the various combos were added in various gcc versions, but only
really worked in later versions:
Variant | Introduced in | First built in
----------+---------------+----------------
a15-a7 | 4.9 | 4.9
a17-a7 | 5 | 5
a57-a53 | 4.9 | 6
a72-a53 | 5 | 6
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-mfpxx option was added in gcc-5.1.0 so make sure that users cannot
select the "xx" fp32 mode when using toolchains that have a gcc older
than 5.1.0.
-mfp32 and -mfp64 were added in gcc-4.1.0, so given the older gcc
version we support in Buildroot (in the GCC_AT_LEAST options) is 4.3 we
don't need to do anything else for them.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-mnan option was added in gcc-4.9.0 so make sure that users cannot
select the NaN mode when using toolchains that have a gcc older
than 4.9.0, and also make sure that the -mnan option is not passed at
all to the toolchain-wrapper and target cflags.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
MIPS32 support different FP modes (32,xx,64), so give the user the
opportunity to choose between them. That will cause host-gcc to be built
using the --with-fp-32=[32|xx|64] configure option. Also the
-mfp[32|xx|64] gcc option will be added to TARGET_CFLAGS and to the
toolchain wrapper.
FP mode option shouldn't be used for soft-float, so we add logic in the
toolchain wrapper if -msoft-float is among the arguments in order to not
append the -fp[[32|xx|64] option, otherwise the compilation may fail.
Information about FP modes here:
- https://sourceware.org/binutils/docs/as/MIPS-Options.html
- https://dmz-portal.imgtec.com/wiki/MIPS_O32_ABI_-_FR0_and_FR1_Interlinking#5._Generating_modeless_code
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
MIPS supports two different NaN encodings, legacy and 2008. Information
about MIPS NaN encodings can be found here:
https://sourceware.org/binutils/docs/as/MIPS-NaN-Encodings.html
NaN legacy is the only option available for R2 cores and older.
NaN 2008 is the only option available for R6 cores.
R5 cores can have either NaN legacy or NaN 2008, depending on the
implementation. So, if the user selects a generic R5 target architecture
variant, we show a choice menu with both options available. For well
known R5 cores we directly select the NaN enconding they use.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It makes no sense to default to an arbitrary path. In addition, it in
fact works correctly when it is empty. In that case, the toolchain will
be searched in PATH.
Update the help text to explain the above, and also that the compiler
is supposed to be in the bin subdirectory.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 14151d77af that eliminated
$(HOST_DIR)/usr seriously missed the toolchain-wrapper - only a single
reference was updated, the other three were missed. Commit
015d68c84c removed one more. This commit
finally removes the two remaining ones.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The toolchain wrapper, when called through PATH, strips the last three
levels of /proc/self/exe to find HOST_DIR. However, after the host/usr
removal, this should be just two levels.
The toolchain wrapper has different logic for when it is called with a
full path (i.e. $HOST_DIR/usr/bin/arm-linux-gcc) then when it is called
through the PATH (i.e. just arm-linux-gcc). The latter is never used
internally in Buildroot, that's why this wasn't discovered through
testing.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Mark Jackson <mpfj-list@newflow.co.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 32bec8ee2f (toolchain-external: copy ld*.so* for all C libraries)
removed the definition of TOOLCHAIN_EXTERNAL_MUSL_LD_LINK. Remove also the
reference to it.
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In commit 32bec8ee2f
("toolchain-external: copy ld*.so* for all C libraries") we changed
how the musl dynamic linker symbolic link was being created. Instead
of having specific logic in Buildroot, we switched to simply copying
the ld*.so.* symbolic link from staging to target, as well as the
target of this symbolic link.
However, it turns out that by default, musl creates its dynamic linker
symbolic link with an absolute path as the target of the link:
/lib/libc.so.
Therefore, external Musl toolchains built with Buildroot look like
this:
lrwxrwxrwx 1 thomas thomas 12 Jul 4 19:46 ld-musl-armhf.so.1 -> /lib/libc.so
The principle of the copy_toolchain_lib_root function, which is used
to copy libraries from staging to target, is to copy symbolic links
and follow their targets. In this case, it means we end up copying
/lib/libc.so (from the host machine) into the target folder. From
there on, there are two cases:
1. /lib/libc.so exists in your host system. It gets copied to the
target. But later on, Buildroot also copies /lib/libc.so from
staging to target, overwriting the bogus libc.so. So everything
works fine, even though it's admittedly ugly.
2. /lib/libc.so doesn't exist in your host system. In this case, the
build fails with no clear error message.
This problem does not happen with Musl toolchains built by
Crosstool-NG, because Crosstool-NG replaces the absolute target of the
dynamic linker symbolic link by a relative path.
However, since we want to support existing Buildroot Musl toolchains
and generally work with the fact that Musl by default installs an
absolute symlink, the following commit improves the
copy_toolchain_sysroot function to replace symbolic links with an
absolute destination to use a relative destination. I.e, in staging,
the ld-musl-armhf.so.1 symbolic link looks like this:
lrwxrwxrwx 1 thomas thomas 14 Jul 5 22:59 output/staging/lib/ld-musl-armhf.so.1 -> ../lib/libc.so
Fixes:
http://autobuild.buildroot.net/results/ce80264575918a8f71d9eab1091c21df85b65b1a/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In commit b3cc7e65ee, the definition of the DESTDIR variable was moved
down into the loop that follows symlinks in the libraries that are
copied to target. However, the corresponding mkdir was not moved down,
so that no directories are ever created.
In practice, this mkdir is normally redundant since the directories
should already have been created as part of creating STAGING_DIR.
Still, the current situation is clearly wrong, so fix it by moving the
mkdir down to after the assignment to DESTDIR.
While we're at it, also remove a redundant empty line. It's a leftover
from when a lot of variables were declared above.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since things are no longer installed in $(HOST_DIR)/usr, the callers
should also not refer to it.
This is a mechanical change with
git grep -l '$(HOST_DIR)/usr/bin' | xargs sed -i 's%$(HOST_DIR)/usr/bin%$(HOST_DIR)/bin%g'
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In copy_toolchain_sysroot, if no ld.so has been found in the
STAGING_DIR after the sysroot copy, we look at ARCH_SYSROOT_DIR if a
ld.so is available there. We do this for both ld*.so and ld*.so.*.
However, when copying thing from staging to target (as listed in
TOOLCHAIN_EXTERNAL_LIBS), we only match on ld*.so.*. This would mean
that even if a dynamic linker matching ld*.so but not ld*.so.* was
copied into staging by copy_toolchain_sysroot, it would anyway not be
copied to the target filesystem, making the system unusable.
Therefore, we can remove the special case on ld*.so, and keep only
ld*.so.*.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libgcc_s.so is now added to TOOLCHAIN_EXTERNAL_LIBS for glibc/uclibc
in one place, and for musl in another place. Bottom line: it should be
in TOOLCHAIN_EXTERNAL_LIBS unconditionally.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, for the dynamic loader, we're copying ld*.so* for glibc and
uClibc, except for glibc/EABIhf where we are explicitly copying
ld-linux-armhf.so.*. For musl, we're not copying the dynamic linker
because it's simply a symbolic link to libc.so. However, the name of
the musl dynamic linker changes from one architecture to the other,
and we don't handle all cases.
Since handling the musl dynamic linker symlink creation is becoming
more and more annoying to maintain, this commit makes musl use the
same mechanism as glibc/uClibc: put the dynamic linker in
TOOLCHAIN_EXTERNAL_LIBS.
In addition, the special condition on glibc/EABIhf was added in
11ec38b695 ("toolchain-external: fix
Linaro ARM toolchain support") because an old Linaro toolchain had two
dynamic loaders, and we wanted to copy only one. But 1/ this is old
and 2/ having the two dynamic linkers doesn't really matter.
So this commit simply unconditionally adds "ld*.so*" to
TOOLCHAIN_EXTERNAL_LIBS, regardless of the C library being chosen. It
re-uses the musl dynamic linker symlink from the sysroot, which makes
it always correct, and allows us to remove the
TOOLCHAIN_EXTERNAL_MUSL_LD_LINK hook, and all the related logic.
This commit therefore solves two problems with the musl dynamic linker
symbolic link creation logic:
1 We support all architectures, without having to hardcode in
Buildroot the mapping between the CPU architecture and the
corresponding dynamic linker name. For example, our current logic
was not handling the mips64+n32 ABI case, where the dynamic linker
is named ld-musl-mipsn32el.so.1.
2 We support Crosstool-NG musl toolchains, where the dynamic linker
is in /lib, but libc.so is in /usr/lib.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
This commit therefore replaces:
- https://patchwork.ozlabs.org/patch/780411/ (was another solution
for solving problem 1 above)
- https://patchwork.ozlabs.org/patch/763977/ and
https://patchwork.ozlabs.org/patch/748974/ (was another solution
for solving problem 2 above)
copy_toolchain_lib_root copies libraries from staging to target,
resolving and copying symbolic links along the way.
The most inner loop, a "while" loop, starts from an initial name, and
if it's a symbolic link, gets resolved to the target, and the loop
iterates until we reach a real file. However, the destination folder
where the symbolic link or real file is created is computed in DESTDIR
only once, before this loop starts. Therefore, this loop works fine
when all symbolic links in the chain, and the real file all belong to
the same directory. But it doesn't do the correct thing when the
symbolic link and/or real file are in different folder.
An example is Crosstool-NG musl toolchains, where the dynamic loader
is in /lib/ld-musl*.so but points to ../usr/lib/libc.so. With the
current logic, we copy /lib/ld-musl*.so to /lib, but we also copy
libc.so to /lib instead of the expected /usr/lib.
This currently doesn't cause any problem because the musl dynamic
linker is manually created by the TOOLCHAIN_EXTERNAL_MUSL_LD_LINK
hook. However, this logic has a number of problems, so in a followup
commit, we are going to put the musl dynamic linker in
TOOLCHAIN_EXTERNAL_LIBS, which will cause it to be copied by
copy_toolchain_lib_root. But we obviously want the link and its target
to be copied to the right place, hence this fix.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Move toolchainfile.cmake and Buildroot.cmake from
$(HOST_DIR)/usr/share/buildroot to $(HOST_DIR)/share/buildroot.
Build-tested with a bunch of cmake packages.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We currently use $(HOST_DIR)/usr as the prefix for host packages. That
has a few disadvantages:
- There are some things installed in $(HOST_DIR)/etc and
$(HOST_DIR)/sbin, which is inconsistent.
- To pack a buildroot-built toolchain into a tarball for use as an
external toolchain, you have to pack output/host/usr instead of the
more obvious output/host.
- Because of the above, the internal toolchain wrapper breaks which
forces us to work around it (call the actual toolchain executable
directly). This is OK for us, but when used in another build system,
that's a problem.
- Paths are four characters longer.
To allow us to gradually eliminate $(HOST_DIR)/usr while building
packages, replace it with a symlink to .
The symlinks from $(HOST_DIR)/usr/$(GNU_TARGET_NAME) and
$(HOST_DIR)/usr/lib that were added previously are removed again.
Note that the symlink creation will break when $(HOST_DIR)/usr
already exists as a directory, i.e. when rebuilding in an existing
output directory. This is necessary: if we don't break it now, the
following commits (which remove the usr part from various variables)
_will_ break it.
At the same time as creating this symlink, we have to update the
external toolchain wrapper and the external toolchain symlinks to go
one directory less up. Indeed, $(HOST_DIR) is one level less up than
it was before.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that all packages have been migrated to the new gettext logic, we
can remove the BR2_NEEDS_GETTEXT and BR2_NEEDS_GETTEXT_IF_LOCALE
variables.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This new boolean is true if the toolchain provides a built-in
full-featured implementation of gettext (glibc), and false if only a
stub implementation is provided (uclibc, musl).
This will be used in follow-up commits to decide whether libintl needs
to be built by gettext or not.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Static build with external musl toolchain leaves a dangling symlink to
libc.so. Don't create that symlink on static build.
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We do not support uClibc-ng/musl C library version choice support,
do the same for GNU C Library.
No legacy handling required as only version choice is removed.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: move 3.2 kernel headers dependency to the libc choice in
toolchain/toolchain-buildroot/Config.in file, and added a Config.in
comment about it.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove mention of toolchains the we don't have.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since glibc 2.17, executable link command need not include the -lrt option for
clock_* system calls. As a result, over time less and less software packages
bother to check whether to toolchain needs -lrt. We are now at a point where
maintainers refuse to add this complexity into their build system. This
requires Buildroot to carry patches fixing this issue indefinitely.
glibc 2.17 is now 4.5 years old. There is no reason to use an older version
with current software.
This commit removes the predefined profile for CodeSourcery sh toolchain that
is based on glibc 2.16. One may still use the custom external toolchain
support in Buildroot to get this toolchain back, and deal with any build
issues that this toolchain causes.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since glibc 2.17, executable link command need not include the -lrt option for
clock_* system calls. As a result, over time less and less software packages
bother to check whether to toolchain needs -lrt. We are now at a point where
maintainers refuse to add this complexity into their build system. This
requires Buildroot to carry patches fixing this issue indefinitely.
glibc 2.17 is now 4.5 years old. There is no reason to use an older version
with current software.
This commit removes the predefined profile for CodeSourcery x86 toolchain that
is based on glibc 2.16. One may still use the custom external toolchain
support in Buildroot to get this toolchain back, and deal with any build
issues that this toolchain causes.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As GCC 7 is now available in Buildroot, update the definition for
BR2_TOOLCHAIN_HAS_GCC_BUG_64735 as the bug #64735 is fixed in GCC 7.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The external toolchain code has some logic to calculate the correct name
for the dynamic linker symbolic link that needs to be created when the
musl C library is being used. There was already some handling for the
mipsel+soft-float case, but not for the mips+soft-float case. Due to
this, the symbolic link was incorrectly named, and programs were
referencing an non-existing file.
Reported-by: Florent Jacquet <florent.jacquet@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove upstream patches:
831-ARM-PR-target-70473-Reduce-size-of-Cortex-A8-automat.patch
870-xtensa-Fix-PR-target-78118.patch
871-xtensa-Fix-PR-target-78603.patch
890-fix-m68k-compile.patch:
1701058da9
892-libgcc-mkmap-symver-support-skip_underscore.patch:
6c8f362e1f
893-libgcc-config-bfin-use-the-generic-linker-version-in.patch:
966d046c08
894-libgcc-fix-DWARF-compilation-with-FDPIC-targets.patch:
397d0e43ab
895-bfin-define-REENTRANT.patch:
da89a4dcdf
940-uclinux-enable-threads.patch:
b9ce54109e
941-mips-Add-support-for-mips-r6-musl.patch:
8371706509
Remove obsolete patches:
301-missing-execinfo_h.patch: boehm-gc removed from gcc sources:
baf7122876
830-arm_unbreak_armv4t.patch: SUBTARGET_CPU_DEFAULT removed:
ff3caa3ade
Add a new patch to allow to build gcc 7.1 without extracting gcc/testsuite
directory.
This new gcc version require a kernel patch [1] to avoid a build issue with
____ilog2_NaN symbol. The following kernel version contain contain already
this patch :
4.11, 4.10.6, 4.9.18, 4.4.57, 3.18.50 and 3.12.73.
To build a toolchain based on gcc 7 and uClibc-ng 1.0.24, the patch [2] is
required to avoid a build issue due to missing aligned_alloc() definition.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=474c90156c8dcc2fa815e6716cc9394d7930cb9c
[2] https://cgit.openadk.org/cgi/cgit/uclibc-ng.git/commit/?id=5b0f49037e8ea8500b05c8f31ee88529ccac4cee
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Tested-by: Theodore Ateba <tf.ateba@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The libc-compat.h first appeared in kernel version 3.12. Trying to build a
musl toolchain using earlier headers leads to the following failure:
/bin/sed: can't read .../output/host/usr/arm-buildroot-linux-musleabi/sysroot/usr/include/linux/libc-compat.h: No such file or directory
package/pkg-generic.mk:266: recipe for target '.../output/build/toolchain/.stamp_staging_installed' failed
Don't apply the sed patch to older headers.
Reported-by: Florent Jacquet <florent.jacquet@free-electrons.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
An autobuilder exception has been added to avoid testing qt gui module
with the CodeSourcery NiosII toolchain. This allow to remove the
BR2_TOOLCHAIN_HAS_BINUTILS_BUG_19405 symbol.
This reverts commit 5dce3c05b5.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The current URL returns error 403: Forbidden, so switch to https.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The current URL returns error 403: Forbidden, so switch to https.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
