- License is GPL-3.0+ since version 4.3.0 and
6b92536858
- Switch to cmake-package
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Refresh patch
- libiconv is needed without locale since version 4.3.0 and
d5713996c2
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
BearSSL is an implementation of the SSL/TLS protocol (RFC 5246) written
in C
https://bearssl.org
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
NSS assumes <sys/auvx.h> is always present but that's not true, so add a
patch to check if it exists or not.
Fixes:
http://autobuild.buildroot.net/results/425ba828d30c2bd55ce9f4f00e67bc10d9de2867/
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
PKG-INFO hash change is due to version bump.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We need to set -DPROTOBUF_UPDATE_FILES=ON otherwise our protobuf
headers will be incompatible.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
systemd-userdbd is a system service that multiplexes user/group lookups
to all local services that provide JSON user/group record definitions
to the system. In addition it synthesizes JSON user/group records from
classic UNIX/glibc NSS user/group records in order to provide full
backwards compatibility.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
systemd-repart grows and adds partitions to a partition table, based on
the configuration files described in repart.d.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Set default-dns-over-tls to opportunistic when dns-over-tls is enabled
as it should be fully backwards compatible. The DNSOverTLS config in
resolved.conf can be used to override default-dns-over-tls.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When running ser2net it looks for config files in the legacy conf
format and the new yaml format so we need to allow either in the
sysv init script.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add an option to enable or disable mod_cap and select libcap accordingly
instead of using bundled libcap which raise a build failure with headers
< 4.3 due to PR_CAP_AMBIENT and will be removed in version 1.3.7:
8c845703fc
Fixes:
- http://autobuild.buildroot.org/results/4d680d8204bdf1f3deec2c3eeb9a2d9e6eabe4d5
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a configuration to enable the JavaScript shell (default off). So
far only libmozjs is required (by polkit) and the shell takes around
24MiB.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The web-interface files (~1.8MB) are by default installed under
/usr/share/doc/cups, which is unfortunate as Buildroot removes usr/share/doc
in target-finalize, breaking the webui.
As a fix, store the web-interface files under /usr/share/cups/doc-root,
similar to how it is done in Debian.
Signed-off-by: Alexey Lukyanchuk <skif@skif-web.ru>
[Peter: use --with-docdir, update description]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The SWUPDATE_SET_BUILD_OPTIONS macro sets a number of swupdate
configuration options with local build details, especially the
cross-compiler path and sysroot path.
This means that if one stores an swupdate defconfig file as part of
Buildroot, generated with "make swupdate-update-defconfig", it will
contain things like:
CONFIG_CROSS_COMPILE="/home/thomas/projets/buildroot/output/host/bin/arm-linux-"
CONFIG_SYSROOT="/home/thomas/projets/buildroot/output/host/arm-buildroot-linux-uclibcgnueabi/sysroot"
which obviously are not good, as they are specific to where the build
was done.
So instead this commit:
- Uses the CROSS_COMPILE environment variable to pass the
cross-compiler path.
- Drops entirely the use of CONFIG_SYSROOT, since all it does is pass
a --sysroot option to the compiler, which is not needed in the
context of Buildroot.
- Pass EXTRA_CFLAGS/EXTRA_LDFLAGS also through the environment.
Thanks to that the swupdate defconfig file no longer contains any
local build details, and can be re-used by different users of a given
Buildroot configuration.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- disable introspection unconditionally (as already done for all
other original gstreamer1 packages)
- use '=' instead of '+=' for the first usage of GST1_VALIDATE_CONF_OPTS
Fixes:
http://autobuild.buildroot.net/results/e6e43fb85c71af9bb599ea8bbe2e805b392cf1ad
GEN GstValidate-1.0.gir
Couldn't find include 'GstPbutils-1.0.gir' (search path: '['/nvmedata/autobuild/instance-6/output-1/host/bin/../aarch64-buildroot-linux-gnu/sysroot/usr/bin/../share/gir-1.0', '/usr/share/gir-1.0', '/usr/share/gir-1.0', '/usr/share/gir-1.0', '/usr/share/gir-1.0', '/usr/share/gir-1.0', '/nvmedata/autobuild/instance-6/output-1/host/share', 'gir-1.0', '/nvmedata/autobuild/instance-6/output-1/host/share/gir-1.0', '/usr/share/gir-1.0']')
make[5]: *** [Makefile:1612: GstValidate-1.0.gir] Error 1
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
host-thrift can fail if a broken Qt4 is found on host:
CMake Error in lib/cpp/CMakeLists.txt:
Imported target "Qt4::QtCore" includes non-existent path
"/nvmedata/autobuild/instance-4/output-1/host/usr/mkspecs/default"
in its INTERFACE_INCLUDE_DIRECTORIES. Possible reasons include:
* The path was deleted, renamed, or moved to another location.
* An install or uninstall procedure did not complete successfully.
* The installation package was faulty and references files it does not
provide.
Fixes:
- http://autobuild.buildroot.org/results/57cad5313896c868e99b0b9534678f1c83a386f2
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This allows to use nftables instead of the default iptables.
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use style typical for Buildroot.
Suggested-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
If there is no infra set or infra is virtual the status is set to 'na'.
This is done for the follwing checks:
- license
- license-files
- hash
- hash-license
- patches
- version
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This value can be used for later processing.
In the buildroot-stats application this is used to create links pointing
to the git repo of buildroot.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Unify the status check information. The status is stored in a tuple. The
first entry is the status that can be 'ok', 'warning' or 'error'. The
second entry is a verbose message.
The following checks are performed:
- url: status of the URL check
- license: status of the license presence check
- license-files: status of the license file check
- hash: status of the hash file presence check
- patches: status of the patches count check
- pkg-check: status of the check-package script result
- developers: status if a package has developers in the DEVELOPERS file
- version: status of the version check
With that status information the following variables are replaced:
has_license, has_license_files, has_hash, url_status
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the function 'parse_developers' function from getdeveloperlib that
collect the information about the developers and the files they
maintain. Then set the maintainer(s) to each package.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Remove the patch_count attribute and use a class property instead.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch changes the type of the latest_version variable to a dict.
This is for better readability/usability of the data. With this the json
output is more descriptive in later processing of the json output.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
During the CVE checking phase, we can still see a huge amount of
Python processes (actually 128) running on the host, even though
the CVE step is entirely ran in the main thread.
These are actually the worker processes spawned to check for the
packages URL statuses and the latest versions from release-monitoring.
This is because of an issue in Python's multiprocessing implementation:
https://bugs.python.org/issue34172
The problem was already there before the CVE matching step was
introduced, but because pkg-stat was terminating right after the
release-monitoring step, it went unnoticed.
Also, do not hold a reference to the multiprocessing pool from
the Package class, as this is not needed.
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In Python 3, the functions from the subprocess module return bytes
(and no longer strings as in Python 2), which must be decoded for
further text operations.
Now, pkg-stats can be run in Python 3.
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It seems like throughout the series that the CVE pkg-stats support
went through, the support for ignoring CVEs in the per-package
<pkg>_IGNORE_CVES variable was forgotten.
Let's re-introduce this, which is now very simple thanks to the CVE
class, its .identifier() propertly and the .is_cve_ignored() method of
the Package class
Cc: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Changelog (since 1.60):
- 1.61 2020-01-11 Fixed errors in the documentation for bcm2835_spi_write.
Fixes issue seen on Raspberry Pi 4 boards where 64-bit off_t is used by
default via -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64. The offset was
being incorrectly converted, this way is clearer and fixes the problem.
Contributed by Jonathan Perkin.
- 1.62 2020-01-12 Fixed a problem that could cause compile failures with
size_t and off_t
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested with qemu_riscv32_virt_defconfig and
qemu_riscv64_virt_defconfig using Buildroot host-qemu 4.2.0.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The tools option installs more than gst-launch and gst-inspect, so
simplify its prompt to just "install tools", and update the Config.in
help text. While at it, we list them alphabetically.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add tools option to disable building/installing of gst-discoverer,
gst-device-monitor and gst-play command line tools (similar to
BR2_PACKAGE_GSTREAMER1_INSTALL_TOOLS).
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
