The RPi is slowly but surely dropping support for booting without a DTB,
so just ditch our old defconfig now that we have up-to-date DT-enabled
defconfigs for all RPi models (save for the compute module).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Floris Bos <bos@je-eigen-domein.nl>
Cc: Pascal de Bruijn <pmjdebruijn@pcode.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update to the latest stable kernel version (4.0.y); build an in-tree DTB.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Floris Bos <bos@je-eigen-domein.nl>
Cc: Pascal de Bruijn <pmjdebruijn@pcode.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update to the latest stable kernel version; build an in-tree DTB; use
a in-tree defconfig; enable C++ (to match what we have in the non-DT
variant); do not install DTB overlays (this minimalist config does not
make use of them).
Generate the DTBs for both the "original" variant (A and B) and the
"Plus" variant (A+ and B+).
Drop our custom linux defconfig file now we use an in-tree one.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Floris Bos <bos@je-eigen-domein.nl>
Cc: Pascal de Bruijn <pmjdebruijn@pcode.nl>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix a typo in the monkey package - should be MONKEY_CONF_OPTS
instead of MONKEY_CONF_OPT.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Include commit ec6cc07f which fixes an issue causing build failures
on several architectures.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Following commit 36555b4c8d ("ARC:
switch to RC1 of upcoming arc-2015.06 tools"), the binutils package
only contains the hash information for the 2015.06-rc1 ARC version of
binutils (which is in fact no hash). However, when an external
toolchain is used, and binutils is built for the target, it's still
the old 2014.11 binutils version that gets used in binutils.mk,
causing a build failure because there is no hash available for this
version.
This commit fixes that by using 2015.06-rc1 as the default binutils
version on ARC, which is used when no host-binutils has been built.
Fixes:
http://autobuild.buildroot.org/results/8f7/8f772e6fccb4f918120a7bb814da2224432d1c09/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For some reason, the hash file added in commit
ee6c9f5a1b by Gustavo turns out to be
wrong, so this commit replaces it with the proper hash, also added
after checking the GPG signature.
While at it, we switch to using a .bz2 tarball.
Fixes:
http://autobuild.buildroot.org/results/c44/c441f35119191f47dd5fae96fd76827024e50329/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Monkey is a small, fast and lightweight open source Web Server for
GNU/Linux. It has been designed with focus in embedded devices,
therefore its scalable by nature having a low memory and CPU
consumption and an excellent performance.
[Thomas:
- Add missing dependency on !BR2_STATIC_LIBS (the source code uses
dlopen) and BR2_USE_MMU (the source code uses fork)
- Slightly adjust/reword the description of the
BR2_PACKAGE_MONKEY_SHARED option.
- Remove all the complicated installation logic for the target, and
just use "make install" instead.
- Pass --no-backtrace when uClibc is used, otherwise the build fails
because <execinfo.h> is not available in uClibc.
- Pass $(TARGET_CONFIGURE_OPTS) in the environment of the configure
script., otherwise monkey gets built for the host and not for the
target.
- Add a post install target hook to remove a broken symlink
libmonkey.so installed by Monkey's Makefile when the shared
library is not enabled.
- Use TARGET_MAKE_ENV when calling make, just because we should.
- Pass --malloc-libc so that the libc malloc() is used instead of
the builtin jemalloc allocator, which requires more work to
cross-compile properly.
- Add missing empty line after the .mk header and before the first
variable definition.]
Signed-off-by: Julien Corjon <corjon.j@ecagroup.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Misc fixes and improvements all over the place...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Floris Bos <bos@je-eigen-domein.nl>
Cc: Pascal de Bruijn <pmjdebruijn@pcode.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, Buildroot does not support building the overlays that are
bundled in the Linux kernel, so all we can do is install the ones
pre-built in rpi-firmware.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Floris Bos <bos@je-eigen-domein.nl>
Cc: Pascal de Bruijn <pmjdebruijn@pcode.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The binary .dtb files are not suitable for everyone as they are
kernel-version specific.
Reintroduce BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS option.
Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
[yann.morin.1998@free.fr: don't install DTBs if kernel builds
its own; fix default; rephrase help text]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Pascal de Bruijn <pmjdebruijn@pcode.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Bump to version 221
- Update hash file
- Add --disable-gnuefi to configure options to avoid a failure like this
one:
checking for /usr/lib/gnuefi/elf_ia32_efi.lds... configure: error:
cannot check for file existence when cross compiling
- Remove gudev logic since it has been removed from the systemd tree and
it is now an external project.
Announcement URL:
http://lists.freedesktop.org/archives/systemd-devel/2015-June/033170.html
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Enable the target qemu for aarch64 since it works just fine.
Only tested using userland CPU emulation (no HYP) with a
qemu_aarch64_virt_defconfig image inside a qemu_aarch64_virt_defconfig
instance.
Signed-off-by: Gustavo Zacarias <gustavo.zacarias@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
fix some build failures,
see https://github.com/arsv/perl-cross/issues/17
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Patches refreshed to apply with no shift or fuzz.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The bin path for nginx is configured for /usr/sbin, so deleting
the nginx.old back-up from /usr/bin never works. Fix path, and
also use "$(RM)" instead of "-$(RM)", as "rm -f" never fails.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Tested-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With following blackfin toolchains
BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1
BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1
BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2
when BR2_BINFMT_FDPIC=y
../usr/include/bits/elf-fdpic.h: In function 'void* __reloc_pointer(void*, const elf32_fdpic_loadmap*)':
../usr/include/bits/elf-fdpic.h:95: error: invalid use of 'void'
code snippet at line 95 in elf-fdpic.h
-------------------------------------------------------
unsigned long offset = p - (void*)map->segs[c].p_vaddr;
-------------------------------------------------------
void pointer addition and subtraction is not allowed in C++ as it has undetermined size,
however in C with language extension it is possible because sizeof void is treated
as one byte.
This is toolchain-specific issue. So disable package on these external toolchains.
fixes:
http://autobuild.buildroot.net/results/c70/c704c70ae2f066f85dd6a5fa6a73789bc358d368/
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
when BR2_STATIC_LIBS=y
src/symbolize.cc:110:19: error: dlfcn.h: No such file or directory
glog requires dlfcn.h header. So add dependency on dynamic library
fixes:
http://autobuild.buildroot.net/results/75d/75d17ceb764c2c1136047c089a0c554770ca98a4/
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new defconfig for the Olimex A20 OLinuxino Lime
board, based on the 3.4.x vendor specific kernel, which allows to use
the Mali 3D acceleration for OpenGL support.
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new defconfig for the Olimex A20 OLinuxino Lime
board, based on the 4.x mainline kernel.
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In order to allow other packages to easily select libaio without
duplicating its complicated architecture dependencies, this commit
introduces a BR2_PACKAGE_LIBAIO_ARCH_SUPPORTS blind option.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
previously, this library was a part of sunxi-mali
[Thomas: add missing comment about the glibc dependency.]
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: fix minor Config.in formatting issues pointed by Yann.]
Signed-off-by: Martin Bark <martin@barkynet.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Following the switch to uClibc-ng as the default library, uClibc-ng
was also used as the default on ARC, while we actually want to use the
ARC specific version by default on this architecture.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Even though this is only RC1 it's been heavily used internally so it should
not be any worse than existing arc-2014.12.
Moreover this relase (and so its RC1) finally delivers support of NPTL
for ARC in uClibc.
That's why it would be good to allow interested users to start trying it
(for example WebKit and apps that use WebKit could be successfully built
and run) also it will be helpful to run that new toolchain through
autobuilder in attempt to find any hidden regressions so we have a solid
toolchain for release.
If there's an interest in that patch more patches will follow with
subsequent RCs and essentially on appearence or relese Buildroot will be
updated with it.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: arc-buildroot@synopsys.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
check_arm_abi builds a test C file to check that the toolchain is
working correctly, with the output redirected to /dev/null.
However, some toolchains (OSELAS 2014.12.0, for instance) foolishly
append ".gdb" to the output filename for an intermediate file, causing
an attempt to write to /dev/null.gdb, which obviously fails.
Fix this by adding changing the output to a temporary file, which is
later removed along with any other "suffixed" files.
Suggested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add the Cortex M3 variant. These microcontrollers don't support regular
ARM instructions and don't have an MMU.
Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A very interesting use-case for a kconfig-based package is to create a
custom (def)config file based on one bundled with the package itself,
like described in PR-8156:
make menuconfig
-> enable kernel, use an in-tree defconfig, save and exit
make linux-menuconfig
-> enable/disable whatever option, save and exit
make menuconfig
-> change to use a custom defconfig file, set a path, save and exit
make linux-update-config
-> should save to the new custom defconfig file
However, that is currently not possible, because the dependency chain
when saving the configuration goes back up to the (newly-set!) custom
(def)config file, which does not exist.
So, we break the dependency chain so that saving the configuration does
not depend on that file. Instead, we use a terminal rule that checks
that the configuration has indeed been done, and fails if not.
Closes#8156.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
After we exit the configurators, we need to re-run the kconfig fixups to
ensure the user is not able to override them in the configurators.
Currently, we schedule that "for later", by removing the corresponding
stamp file, so make will run the fixups "later".
This means the user has access to the un-fixed .config file, which he
might decide to copy and use as a reference (not too bad, since we'd run
the fixups anyway; but not clean either).
Note that we still remove the stamp file before running the fixups, in
case any one of those fixups breaks, so we don't want to believe the
fixups have been applied; the fixup macro will touch that file anyway.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The same fixups will have to be done after leaving the configurators,
so we want to commonalise that code.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Even though we do have a dependency chain back to each of the kconfig
base and fragment files:
$$($(2)_DIR)/.config: $$($(2)_KCONFIG_FILE) $$($(2)_KCONFIG_FRAGMENT_FILES)
we can't rely on it to ensure they are all present, because they all have
this rule:
$$($(2)_KCONFIG_FILE) $$($(2)_KCONFIG_FRAGMENT_FILES): | $(1)-patch
but since this rule has no prerequisite (only build-order, but that does
not count in this case) and no recipe, make will believe each missing
file to be a PHONY target, and will always run targets that depend on
it:
https://www.gnu.org/software/make/manual/make.html#Force-Targets
So, that means a missing kconfig base or fragment file would always
cause the rule to generate .config to be run at each invocation, which
in turn would cause a rebuild of the kernel, which is clearly not what
we want.
Since this is expected make behaviour, we can well end up with a missing
Kconfig base or fragment. To avoid continuously rebuilding the kernel in
that case, we must check those files exist by ourselves, and error out
if any one of them is missing.
One would expect we check for them right in their dependency rule, like
so:
$$($(2)_KCONFIG_FILE) $$($(2)_KCONFIG_FRAGMENT_FILES): | $(1)-patch
[ -f $(@) ] || {echo Missing $(@) >&2; exit 1; }
but that does not work, as only the first target is tested for. That
check msut be turned into a loop explicitly testing all files, like so:
$$($(2)_KCONFIG_FILE) $$($(2)_KCONFIG_FRAGMENT_FILES): | $(1)-patch
for f in $$($(2)_KCONFIG_FILE) $$($(2)_KCONFIG_FRAGMENT_FILES); do \
[ -f $(@) ] || {echo Missing $$$${f} >&2; exit 1; }; \
done
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Floris Bos <bos@je-eigen-domein.nl>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Kconfig fragments may be present in the package, so we need to extract
and patch it before we can use the fragments.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Floris Bos <bos@je-eigen-domein.nl>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Martin Bark <martin@barkynet.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Drop 110-pr64896.patch and 920-libgcc-remove-unistd-header.patch since
they're upstream.
Tweak 850-libstdcxx-uclibc-c99.patch for this new release.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Although no package seems to link against vlc libraries right now, these
libraries will be necessary for upcoming new efl emotion-generic-players
package.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Acked-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
