Add initial support for bananapi M1 board with below features:
- U-Boot 2017.09
- Linux 4.13.7
- Default packages from buildroot
Cc: Jason <manager@sinovoip.com.cn>
Cc: hailymei@banana-pi.com <hailymei@banana-pi.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The directory package/sepolgen/ was removed in commit 9d6da7a26
(policycoreutils: split packages and bump to 2.7), but two
entries were left in the DEVELOPERS file.
This causes the following warnings when running util/get-developers:
WARNING: 'package/sepolgen/' doesn't match any file
WARNING: 'package/sepolgen/' doesn't match any file
Remove the erroneous entries.
Signed-off-by: Cam Hutchison <camh@xdna.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Policycoreutils was broken up into several packages, as such several
changes needed to happen for this patch to work:
- Remove patches 3, 4, and 5 as they no longer apply.
- Refresh patches 1 and 2 to work with version 2.7
- Remove semodule_${deps,expand,link,package} and sestatus from the makedirs
in the mk file.
- Remove restorecond from the make and config file. (Seperate package)
- Remove Audit2allow from the make and config file. (In a different package)
- Remove the package sepolgen
- Add the package selinux-python
- Add the package restorecond
- Add the package semodule-utils
- Add the relevant Config.in.legacy options into the menu.
Because these are utilities that work on top of python, the older versions of
these utilites still work, and as such this should be a single patch.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As stated by the upstream developers, Prosody only supports
lua-5.1 or luajit (which is a lua-5.1 interpreter):
> Response from zash at zash.se:
>
>> I pegged the package to lua 5,1 based on the contents of the
>> INSTALL file. Is this a hard requirement?
>
> Up until Prosody 0.9 Lua 5.1 is required. However LuaJIT
> implements Lua 5.1 so it works.
The license terms are not very consistent: the source files all
state to be "MIT/X11 licensed" and defer to the COPYING file for
details, but that file only has the text for the MIT license.
Thus, we believe the license to be MIT/X11, as stated in the source
files.
This installs the base system with certificates for two domains:
localhost and example.com
The default runtime configuration is tweaked during installation
to properly setup logging and pid-file directories.
Prosody doesn't like being executed as root, and thus the daemon
is executed as the user prosody. The startup script creates the
pid file write location with appropriate permissions.
Signed-off-by: Dushara Jayasinghe <nidujay@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package is based on the bcg729 library from Belledonne Communica-
tions which is wrapped into a freeswitch module to provide a native
G729.A codec.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Quoting http://www.linphone.org/technical-corner/bcg729/downloads
regarding patent information:
"ITU G729 Annex A/B were offically released October/November 1996
(https://www.itu.int/rec/T-REC-G.729), hence all patents covering these
specifications shall have expired in November 2016.
Patent pool administrator confirmed most licensed patents under the
G.729 Consortium have expired (http://www.sipro.com/G729.html)."
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
After the conversion to SPL the imx6sabresd defconfig targets have
been renamed,so update the entry accordingly.
Suggested-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is similar to the ppc64_pseries config, except we build for little
endian instead of big endian.
The default architecture is set to Power8 as this was the first fully
enabled LE machine.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch is based on works [1] and [2].
With this patch, one can run the Qt5 WebEngine quicknanobrowser sample
with the following options.
BR2_TOOLCHAIN_BUILDROOT_LIBC="glibc" and
BR2_TOOLCHAIN_BUILDROOT_CXX (Qt 5 needs a toolchain w/ wchar, NPTL, C++,
dynamic library; for now it builds only with glibc)
BR2_PACKAGE_LIBERATION (Qt needs at least one font)
BR2_PACKAGE_QT5BASE_EXAMPLES (to install quicknanobrowser sample)
BR2_PACKAGE_QT5BASE_GIF (do display gif)
BR2_PACKAGE_QT5BASE_JPEG (do display jpeg)
BR2_PACKAGE_QT5BASE_PNG (do display png)
BR2_PACKAGE_QT5QUICKCONTROLS (needed by webengine)
BR2_PACKAGE_QT5QUICKCONTROLS2 (needed by webengine)
BR2_PACKAGE_QT5WEBENGINE (because it is what we want)
Qt WebEngine requires an Open(E)GL-capable backend. As an example, the
package rpi-userland must be enabled to build for a rpi.
BR2_PACKAGE_RPI_USERLAND (to enable OpenGL ES backend)
To browse for HTTPS websites, please consider adding the following
options as well for SSL/TLS.
BR2_PACKAGE_CA_CERT (for certificates)
BR2_PACKAGE_NTPD (to sync date for certificates)
Since version 5.9, chromium requires udev at runtime (see note 4).
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV (input backend)
To run quicknanobrowser
# cd /usr/lib/qt/examples/webengine/quicknanobrowser/
# ./quicknanobrowser https://www.buildroot.org/
Note: The chromium.inc has been generated using the following command.
( echo 'CHROMIUM_LICENSE_FILES = \' &&
cd output/build/qt5webengine-5.9.1/ && \
find "src/3rdparty/chromium/" -type f -iname "*LICENSE*" -o -iname "*COPYING*" -o -iname "*GPL*" | \
sed -e '/\.asm$/d' \
-e '/\.h$/d' \
-e '/\.c$/d' \
-e '/\.cc$/d' \
-e '/\.cpp$/d' \
-e '/\.pyc\?$/d' \
-e '/\.pl$/d' \
-e '/\.sha1$/d' \
-e '/\.patch$/d' \
-e '/licensecheck/d' \
-e 's,^,\t,' \
-e 's,$, \\,' | \
sort && \
echo '' ) >package/qt5/qt5webengine/chromium.inc
Note 2: Since 5.9.1, the chromium's copy of opus fails with neon [3].
Qt WebEngine can uses buildroot ffmpeg copy which compiles fine (using
qmake flag WEBENGINE_CONFIG+=use_system_ffmpeg). It implies selecting
the following options.
BR2_PACKAGE_FFMPEG
BR2_PACKAGE_OPUS
BR2_PACKAGE_LIBVPX
BR2_PACKAGE_WEBP
BR2_PACKAGE_WEBP_DEMUX
In file included from ../../3rdparty/chromium/third_party/opus/src/silk/arm/NSQ_neon.c:31:0:
/home/gportay/src/buildroot/output-rpi3-qt5.9/host/lib/gcc/arm-buildroot-linux-gnueabihf/6.4.0/include/arm_neon.h:8997:1: error: inlining failed in call to always_inline ‘vld1q_s32’: target specific option mismatch
vld1q_s32 (const int32_t * __a)
^~~~~~~~~
../../3rdparty/chromium/third_party/opus/src/silk/arm/NSQ_neon.c:40:15: note: called from here
int32x4_t coef0 = vld1q_s32(coef32);
^~~~~
../../3rdparty/chromium/third_party/opus/src/silk/arm/NSQ_neon.c: At top level:
cc1: warning: unrecognized command line option ‘-Wno-#pragma-messages’
Note 3: Version 5.6.2 causes a build issue while building chromium. The
build against this version is disabled until the release 5.6.3 is out.
Note 4: Here is trace when udev does not run
# cd /usr/lib/qt/examples/webengine/quicknanobrowser
# ./quicknanobrowser
QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-root'
Unable to query physical screen size, defaulting to 100 dpi.
To override, set QT_QPA_EGLFS_PHYSICAL_WIDTH and QT_QPA_EGLFS_PHYSICAL_HEIGHT (in millimeters).
[0101/000248.161973:WARNING:resource_bundle_qt.cpp(114)] locale_file_path.empty() for locale
[0101/000248.384693:WARNING:resource_bundle_qt.cpp(114)] locale_file_path.empty() for locale
[202:223:0101/000248.484954:FATAL:udev_loader.cc(38)] Check failed: false.
#0 0x0000742b93de <unknown>
#1 0x0000742c3c38 <unknown>
#2 0x000073e1e1aa <unknown>
#3 0x000073e1d96e <unknown>
#4 0x000073e1defa <unknown>
#5 0x000074af6364 <unknown>
#6 0x000074302878 <unknown>
#7 0x0000742c8fee <unknown>
#8 0x0000742c9f44 <unknown>
#9 0x0000742ca21e <unknown>
#10 0x0000742cac4c <unknown>
#11 0x0000742c87b2 <unknown>
#12 0x0000742da4f6 <unknown>
#13 0x000073ed9d38 <unknown>
#14 0x000073eda03c <unknown>
#15 0x0000742e9aec <unknown>
#16 0x0000742e71dc <unknown>
Aborted
Note 5: On rpi and depending on what is insinde the .config, more GPU
memory should be allocated to run properly qt samples.
#0 0x0000742c63de <unknown>
#1 0x0000742d0c38 <unknown>
#2 0x0000749d7bde <unknown>
#3 0x0000749e3c70 <unknown>
#4 0x00007530227c <unknown>
#5 0x000075302480 <unknown>
#6 0x0000752fb1e4 <unknown>
#7 0x00007430f878 <unknown>
#8 0x0000742d5fee <unknown>
#9 0x0000742d6f44 <unknown>
#10 0x0000742d721e <unknown>
#11 0x0000742d7ad6 <unknown>
#12 0x0000742d57b2 <unknown>
#13 0x0000742e74f6 <unknown>
#14 0x0000742f6a74 <unknown>
#15 0x0000742f41dc <unknown>
Received signal 6
#0 0x0000742c63de <unknown>
#1 0x0000742c66a0 <unknown>
#2 0x0000725b5d10 <unknown>
[end of stack trace]
qml: Render process exited with code 256 (abnormal exit)
# mount /dev/mmcblk0p1 /mnt
# sed '/^gpu_mem_/s,=.*,=200,' -i /mnt/config.txt
# umount /mnt
Note 6: The first patch fixes a build issue when samples are compiled
without the support of printing [4]. This patch is already merged in
branch 5.9 [5] and concerns only 5.9.1.
085c2c52 Always compile QWebEnginePage::print
It fixes the error below.
.obj/browsermainwindow.o: In function `BrowserMainWindow::printRequested(QWebEnginePage*)': browsermainwindow.cpp:(.text+0x2cc0): undefined reference to `QWebEnginePage::print(QPrinter*, QWebEngineCallback<bool> const&)'
The second patch loads both libEGL and libGLESv2 symbols implicitly
instead of loading them with explicitly using hard-coded locations. It
fixes a bug when providers of lib*GL does not create libraries named
libEGL.so.1 and libGLESv2.s2 [6]. This patch is already merged in branch
5.9 [7].
d4c621f6 Load libEGL and libGLES2 symbols implicitly
It fixes the error below.
[327:347:1221/085837:ERROR:surface_factory_qt.cpp(68)] Failed to load /usr/lib/libGLESv2.so.2: /usr/lib/libGLESv2.so.2: cannot open shared object file: No such file or directory
[1]: http://lists.busybox.net/pipermail/buildroot/2015-July/132010.html
[2]: https://patchwork.ozlabs.org/patch/640633/
[3]: https://patchwork.ozlabs.org/patch/791332/
[4]: https://bugreports.qt.io/browse/QTBUG-61510
[5]: https://codereview.qt-project.org/#/c/198041/
[6]: https://bugreports.qt.io/browse/QTBUG-57761
[7]: https://codereview.qt-project.org/#/c/199554/
Cc: Akihiko Odaki <akihiko.odaki.4i@stu.hosei.ac.jp>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
[Arnout:
- move more dependencies to _ARCH_DEPENDS;
- mention all toolchain dependencies in the comments]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Peter: board is from Sinovoip, not Lemaker, move board files,
Use kernel headers from kernel, explicitly use 4.13.3,
drop eth0 dhcp config, cleanup post-build args,
disable tar output format, use u-boot custom format,
add host-dosfstools/mtools for genimage, drop unused
host-uboot-tools/genext2fs]
Signed-off-by: Mike Harmony <mike.harmony@snapav.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
I'm going to leave current company and
this mail address is going to become invalid.
Signed-off-by: Naoki Matsumoto <n-matsumoto@melcoinc.co.jp>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As the SixXS project has ceased its operation on 2017-06-06,
the aiccu utility has been removed.
Signed-off-by: Alexander Mukhin <alexander.i.mukhin@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Brock Williams <brock@cottonwoodcomputer.com>
[Thomas:
- properly handle the NLS cases, by adding two patches
- use sha256 locally calculated hash for the tarball, add hash for
the license file
- fix the license information: it's GPL-2.0 licensed, and the license
file is doc/COPYING.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Buildroot currently packages version 1.18 of simics, which is quite
out of date, and does not compile with Linux 4.12+. The latest package
v1.22 supports recent kernels, however that is not publicly available
anymore like the older versions.
In fact Simics is now moving away from the simicsfs kernel module, as
the kernel module has required too much maintenance work. Users should
move to the new user mode Simics agent instead. Therefore, we drop the
corresponding package from Buildroot.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The azmq library provides Boost Asio style bindings for ZeroMQ. This
library is built on top of ZeroMQ's standard C interface and is intended
to work well with C++ applications which use the Boost libraries in
general, and Asio in particular.
Signed-off-by: RJ Ascani <rj.ascani@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Introduce imx6q-sabresd_qt5_defconfig that supports the opensource
Etnaviv graphical stack.
This defconfig provides a way to quickly test some graphical applications,
such as kmscube, qt5, glmark2.
Currently kernel mainline exhibits issues when running cpufreq as ondemand
governor on mx6, so add a linux fragment that disables such option for the
time being.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
[Arnout:
- Add Fabio to DEVELOPERS
- Rename linux config fragment to linux_qt5.fragment
- Add comment to linux_qt5.fragment why it is needed
- Add explicit CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y to it
- Reorder defconfig entries to they match imx6q-sabresd_defconfig
- Remove strace and host-uboot-tools, neither seems to be needed
- Drop BR2_PACKAGE_QT5BASE_LICENSE_APPROVED, it no longer exists
- Replace BR2_TARGET_ROOTFS_EXT2_BLOCKS with BR2_TARGET_ROOTFS_EXT2_SIZE
- Regenerate .gitlab-ci.yml]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This host-only package was used to enable graphite support in GCC 4.9,
but Buildroot no longer supports Graphite optimizations in GCC 4.9
(only GCC >= 5.x is supported). Therefore, we can remove the cloog
package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
[Thomas: minor tweaks in Config.in file, adjust .mk file for
static+shared build.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
While at it, also move my professional entry near my personal one.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add package to provide Zstandard compression tools
(see https://facebook.github.io/zstd)
Minimal config snippet for utils/test-pkg is as follows:
BR2_PACKAGE_ZSTD=y
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
[Thomas:
- use "config" instead of "menuconfig" in Config.in
- add missing final newline in Config.in
- pass DESTDIR=$(TARGET_DIR) only at install time
- wrap too long lines in the .mk file
- remove useless empty newline at end of .hash file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add initial support for nanopi-m1-plus board
with below features
- U-Boot 2017.07-rc3
nanopi-m1-plus dts support is present in rc3 version
- Linux 4.11.5
- linux patches to add nanopi-m1-plus dts
- Default packages from buildroot
Signed-off-by: Chakra Divi <chakra@openedev.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
PaX regression test suite
Signed-off-by: David Graziano <david.graziano@rockwellcollins.com>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add package for official python bindings availibe as a part of systemd
project at: https://github.com/systemd/python-systemd
Minimal config snippet for utils/test-pkg is as follows (sans
backslashes):
BR2_INIT_SYSTEMD=y
BR2_PACKAGE_PYTHON3=y
BR2_PACKAGE_PYTHON_SYSTEMD=y
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
I'm leaving the company. So removing the entry before the address bounces.
Signed-off-by: Benoît Allard <benoit.allard@greenbone.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The email address of Sagaert Johan is bouncing. Remove his DEVELOPERS entry.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
And add myself to the DEVELOPPERS for squashfs.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Libressl is a fork of openssl from OpenSSL in 2014. Its goal is to
modernize the OpenSSL codebase, improve security, and apply best
practice development processes.
Right now, libressl is API compatible with OpenSSL 1.0.1, but does not
yet include all new APIs from OpenSSL 1.0.2 and later.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add initial support for nanopi-m1 board
with below features
- U-Boot 2017.07-rc1
- Linux 4.11.5
- Default packages from buildroot
Signed-off-by: Chakra Divi <chakra@openedev.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we use mkfs to generate ext2/3/4 filesystem image by calling
mkfs directly from fs/ext2/ext2.mk, we can remove this package.
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a package for pixz (pronounced pixie), a parallel, indexing version of
xz.
See https://github.com/vasi/pixz
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
