Currently, all the dependencies of a package are drawn on the dependency
graph, including transitive dependencies (e.g. A->B->C and A->C).
For very big graphs, with lots of packages with lots of dependencies, the
dependency graph can be very dense, and transitive dependencies are
cluttering the graph.
In some cases, only getting the "build-order" dependencies is enough (e.g.
to see what impact a package rebuild would have).
Add a new environment variable to disable drawing transitive dependencies.
Basically, it would turn this graph:
pkg1 ---> pkg2 ---> pkg3 -------------------.
|\__________/ \ \
|\____________________ \ \
| \ \ \
`-> pkg4 ---> pkg5 ---> pkg6 ---> pkg7 ---> pkg8
\__________/
into that graph:
pkg1 ---> pkg2 ---> pkg3 -----------.
| \
`-> pkg4 ---> pkg5 ---> pkg6 ---> pkg7 ---> pkg8
[Thanks to Samuel for the parser hints]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Do not use the same colors for toolchain, host and target packages.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[yann.morin.1998@free.fr rephrase commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
in order to avoid spurious diff when updating packages
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove some spaces before tabs and add the empty line at end of file.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As Samuel said:
In Python, None is a singleton, and it is recommended to use "is" or
"is not" for testing them [1].
[1] http://legacy.python.org/dev/peps/pep-0008/#programming-recommendations
Reported-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some magic numbers obtained with trial-and-error and successive
iterations, to eventually get a nice graph.
[Thomas: remove excessive spaces in expressions.]
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Al packages depend on 'toolchain'. Currently, 'graph-depends' graphs this
dependency. The resulting graph is thus cluttered with less-than-useful
information.
Instead, do not graph the 'toolchain' dependency for any package, save
for the fake 'all' package. The graph is now a bit more readable.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the complete dependency chain of a package is used to
generate the dependency graph. When this dependency chain is long,
the generated graph becomes almost unreadable.
However, it is often sufficient to get the first few levels of
dependency of a package.
Add a new variable BR2_GRAPH_DEPTH, that the user can set to limit
the depth of the dependency list.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we are using a crude, ad-hoc parsing of argv[].
This is a limiting factor to adding new options.
Use argparse instead, and introduce a single argument for now:
--package, -p PACKAGE
In the (near) future, we'll be able to add more option arguments,
such as depth-limiting for big graphs.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Old toolchains, with old gcc that do not support -print-sysroot, break the
kernel-headers version check script: it fails to find the sysroot of the
toolchain, and thus ends up including the host's linux/version.h.
Most of the time, this will break early, since the host's kernel headers
will not match the toolchain settings.
But it can happen that the check is succesful, although the configuration
of the toolchain is wrong:
- the custom toolchain has kernel headers vX.Y
- the user selected vX.Z (Z!=Y)
- the host has headers vX.Y
In this case, the check passes OK, but the build of some packages later on
will break (which is exactly what those _AT_LEAST_XXX options were added to
avoid).
Fix that by passing the sysroot to the check script, instead of the cross
compiler.
We get the sysroot as thus:
- for custom toolchains, we use the macro toolchain_find_sysroot. We can
do that, because we already have a complete sysroot with libc.a at that
time.
- for internal toolchain using a custom kernel headers version, we just
use $(STAGING_DIR). We can't use the macro as for custom toolchains
above, because at the time we install the kernel headers, we do not yet
have a complete sysroot with a libc.a. But we can just use
$(STAGING_DIR), since we're only interested in the kernel headers.
For all other types of toolchains, we already have the _AT_LEAST_XXX options
properly set, so we need not add a check in this case.
Fixes:
http://autobuild.buildroot.net/results/f33/f331a6eff0b0b93c73af52db3a6b43e4e598577e/http://autobuild.buildroot.net/results/a57/a5797c025bec50c10efdcff74945aab4021d05e4/
[...]
[Thanks to Thomas for pointing out the toolchain_find_sysroot macro!]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Instead of creating a temporary files with a dubious scheme, use mktemp,
which purpose is exactly that: creating temporary files
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since we introduced the _AT_LEAST_XXX for the kernel headers, people
using pre-built custom toolchain now have to specify the version of
the kernel headers their custom toolchain uses.
So, when we detect that there is a mismatch between the selection in
the menuconfig, and the actual version of the headers, we currently
only bail out with a terse message "Incorrect selection of kernel
headers".
This could be confusing some, and getting the version of the headers
used by the toolchain is not trivial (well, it's very easy, but not
trivial.)
This patch changes the way we report the error by moving the message
into the test-code, and by printing the expected and actual versions
of the kernel headers.
BUT! To get this pretty error message, we need to run the
test-program, so we can not use the cross-toolchain, we have to use
the native one.
BUT! The native one has its own linux/version.h header, so we can not
simply include it.
So, we ask the cross-compiler where its default sysroot is, and use
that to then force-feed the cross linux/version.h to the native
toolchain.
[Thomas: augment commit log with a message provided by Yann, fix
coding style to not have spaces after opening parenthesis and before
closing parenthesis, reformatted the message "Incorrect selection..."
to make it fit on one line.]
Reported-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When adding a new user (or a new group), we would get warnings, like:
[...]/support/scripts/mkusers: line 145: [: too many arguments
This is because we're checking if a UID (or a GID) is already defined,
and/or is different from the requested one, both checks in the same
test.
Of course, if a UID (or a GID) is not defined, it does not have a value,
so we can not compare it to an integer.
Fix that by splitting the test in two, so the second is only executed if
the first is sucessful.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This fixes the spurious "[: too many arguments" errors from mkusers.
Signed-off-by: Philip Paeps <philip@paeps.cx>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Ensure the kernel headers version used in the custom external toolchain,
or the manually-specified kernel headers version, matches exactly the one
selected by the user.
We do not care about the patch-level, since headers are not supposed to
change between patchlevels. This applies only to kernels >= 3.0, but
those are actually the ones we do care about; we treat all 2.6.x kernels
as being a single version, since we do not support any 2.6 kernels for
packages with kernel-dependant features.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To make the naming consistent (all user-visible options should be
prefixed with BR2_).
An entry is added to Makefile.legacy to warn users who have set
BUILDROOT_CONFIG but not BR2_CONFIG.
Still export BUILDROOT_CONFIG but pointing to some phony value, to
make sure that scripts that still use it fail in a predictable way.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Jérémy Rosen <jeremy.rosen@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
scan_patchdir is called recursively. For this to work properly, the
variable path which is set to $1 at the very beginning must be local not
global.
A test case is to set BR2_GLOBAL_PATCH_DIR to 'mypatches' and having the
following tree in the buildroot root:
$ find mypatches/
mypatches/
mypatches/busybox
mypatches/busybox/subdir.patch
mypatches/busybox/subdir.patch/busybox-0001-abc.patch
mypatches/busybox/busybox-0002-def.patch
mypatches/busybox/asubdir.patch
mypatches/busybox/asubdir.patch/busybox-0003-xyz.patch
When running 'make busybox-dirclean busybox-patch' originally, you'd get:
Applying busybox-0003-xyz.patch using patch:
Applying busybox-0002-def.patch using patch:
Error: missing patch file
mypatches/busybox/asubdir.patch/busybox-0002-def.patch
While with this fix:
Applying busybox-0003-xyz.patch using patch:
Applying busybox-0002-def.patch using patch:
Applying busybox-0001-abc.patch using patch:
This fixes bug #6434 (https://bugs.busybox.net/show_bug.cgi?id=6434)
Signed-off-by: Daniel Mentz <daniel@exxm.de>
[Thomas: update commit message with test case]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
the initial implementation assumes that when a version found in
buildroot is different from the one in the X11 release, it
requires an upgrade. even though this is most likely the case, it
could be a downgrade too, and it's probably worth highlighting
such cases when it (rarely) happens.
LooseVersion from distutils is doing the low level job of sorting
version numbers represented in strings...
[Thomas & Thomas:
- do not count packages more recent in Buildroot than in the latest
X.org release as to be downgraded. If we have more recent version,
it's generally for a good reason, so we want to keep them as
is. Such packages are counted as "nothing to do", but for
information, we indicate that there are "More recent"
- also remove the "nothing to do" action indicator. It used to be a
simple dash, which was not really useful.
]
Signed-off-by: Nicolas Dechesne <ndec13@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In order to keep better track of when a feature got deprecated, and hence
when it can be removed, a new set of symbols BR2_DEPRECATED_SINCE_xxxx_xx is
introduced. These symbols are automatically selected when BR2_DEPRECATED is
selected, and thus are transparent to the user.
A deprecated feature will no longer depend on BR2_DEPRECATED directly, but
rather on the appropriate BR2_DEPRECATED_SINCE_xxxx_xx. If that symbol does
not yet exist, it has to be created in Config.in.
When removing a deprecated feature, one should also check whether this was
the last feature using the BR2_DEPRECATED_SINCE_xxxx_xx symbol, in which
case the latter can be removed from Config.in.
A followup patch will make sure the overview is added to the list of
deprecated features in the manual, so that a buildroot core developer can
easily determine which features to remove in a given development cycle.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
PDF files can not be easily embedded in other documents (eg. ODT, or HTML).
Add support for generating PNG graphs, by setting the GRAPH_OUT=pdf|png on
the command line:
make GRAPH_OUT=png graph-build graph-depends
The default is still to generate PDF graphs.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This script generates graphs of packages build time, from the timing
data generated by Buildroot in the $(O)/build-time.log file.
Example usage:
./support/scripts/graph-build-time \
--type=histogram --input=$(O)/build-time.log --output=foobar.pdf
Three graph types are available :
* histogram, which creates an histogram of the build time for each
package, decomposed by each step (extract, patch, configure,
etc.). The order in which the packages are shown is
configurable: by package name, by build order, or by duration
order. See the --order option.
* pie-packages, which creates a pie chart of the build time of
each package (without decomposition in steps). Packages that
contributed to less than 1% of the overall build time are all
grouped together in an "Other" entry.
* pie-steps, which creates a pie chart of the time spent globally
on each step (extract, patch, configure, etc...)
The default is to generate an histogram ordered by package name.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[yann.morin.1998@free.fr: adapt to the format of the step-hooks build-time.log,
add sort order by name, default to name-ordered histogram, use our colours
for pie-charts, add alternate color-scheme, add short-options, add
--input/-i]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch fixes an issue that occurs during the manual build process
which will occur when BR2_EXTERNAL is introduced.
During the package list generation, the python script using kconfiglib
module reads and parses the Config.in files. So, symbols, including
environment variables, got expanded and/or resolved. In
kconfiglib.py, this patch fixes the regex that did not allow to use
numbers in the environment variable names, so '$BR2_EXTERNAL' got
wrongly expanded like it was '${BR}2_EXTERNAL':
<snip>
>>> Updating the manual lists...
Traceback (most recent call last):
File "/opt/buildroot/master/support/scripts/gen-manual-lists.py", line 375, in <module>
buildroot = Buildroot()
File "/opt/buildroot/master/support/scripts/gen-manual-lists.py", line 216, in __init__
self.root_config))
File "/opt/buildroot/master/support/scripts/kconfiglib.py", line 214, in __init__
self.top_block = self._parse_file(filename, None, None, None)
File "/opt/src/buildroot/master/support/scripts/kconfiglib.py", line 919, in _parse_file
return self._parse_block(line_feeder, None, parent, deps, visible_if_deps, res)
File "/opt/buildroot/master/support/scripts/kconfiglib.py", line 1114, in _parse_block
self.base_dir))
IOError: /opt/buildroot/master/Config.in:490: sourced file "$BR2_EXTERNAL/Config.in" (expands to
"2_EXTERNAL/Config.in") not found. Perhaps base_dir
(argument to Config.__init__(), currently
"/opt/buildroot/master") is set to the wrong value.
docs/manual/manual.mk:2: recipe for target 'manual-update-lists' failed
make: *** [manual-update-lists] Error 1
</snip>
Reported-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Python saves a pre-compiled support/scripts/kconfiglib.pyc file
side-to-side with the corresponding .py file.
This does not work if the Buildroot source tree is read-only (but
this is not an error for Python, which keep going OK).
But this may cause issues for out-of-tree builds in case the same
Buildroot source tree is shared by many builds.
Also, 'make clean' currently does not clean this file, and out-of-tree
builds can remove it either, at the risk of causing issues for other
out-of-tree builds running at the same time.
Just tell Python not to generate .pyc files:
- call the script via python, don't use the sha-bang
- thus, make the script non-executable, and remove the sha-bang
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch fixes typos in the 'encode_password' function calls.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For out-of-tree builds, this use-case fails to build:
$ make clean all
This is because 'all' is filtered-out in the Makefile wrapper, since
the wrapper itself has a 'all' target.
The 'all' target is just the usual naming for the default target in a
Makefile. In fact, the first target is the default one, so we can name
it whatever we want.
Rename the Makefile wrapper 'all' target to avoid name-clashing.
Fixes#6644.
Reported-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ryan Barnett <rjbarnet@rockwellcollins.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Thomas: added Thomas DS Acked-by, given at
http://patchwork.ozlabs.org/patch/284719/, and made the additional
typo fixes suggested by Thomas DS.]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Disable reversed/already applied patches fallout from commit
5871b79199
Reverse patches are bad, they may unfix things with version bumps and
just sneak under the radar with pure batch mode.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes http://autobuild.buildroot.net/results/868/8687be8ec029486d9c5e2224cde542134f72884b/
The recent (d245fbb41d: apply-patches.sh: detect missing patches)
change to apply-patches.sh causes a number of regressions with packages
using downloadable tarballs of patches (typically from Debian), as
those contain additional files besides just the patches (ChangeLog's,
debian/rules, ..).
This use case is arguably abusing the _PATCH handling, but it used to
work so people might rely on it so go back to only warn about this
instead of erroring out.
At the same time reword the warning message.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The "patch" command returns an error code only if patches fail
to apply. Therefore the pipleline "cat <patchfile> | patch ..."
does not fail, even if <patchfile> is missing. Fix this by
adding an explicit check for patch file existence.
Based on feedback from buildroot mailing list, also change the
existing check for unsupported patch format into a fatal error.
Signed-off-by: Ralph Siemsen <ralphs@netwinder.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In BR sub-directory boot/ linux/ and package/ there are a few .mk files which
aren't <package>.mk files. These files shouldn't be taken into account
in package statistics.
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Brings a number of fixes, and most importantly no longer tries to figure
out if the tree contains uncommitted changes when using svn, as that can
be very slow.
This only syncs with setlocalversion as of 2.6.34 as later kernel versions
aren't directly compatible with our use cases since 09155120c (kbuild:
Clean up and speed up the localversion logic).
We still have one delta from the kernel version (setlocalversion: fix i18n
issue with svn), as that has only later been fixed in the kernel version.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If the file to be patched is missing, then `patch' will interactively
ask for a file to be patched. This is annoying in e.g. the autobuilders
because they have to wait for a timeout instead of failing.
Giving the '-t' (batch mode) option to patch fixes this: it will skip the
missing file, and return a non-zero exit code. So the build cleanly
fails.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This finally removes the BR2_HAVE_DEVFILES option, that was used to
install/keep development files on target. With the recent migration of
the internal backend to the package infrastructure, we had anyway lost
the ability to build gcc for the target, and install the uClibc
development files on the target.
[Peter: also remove support/scripts/copy.sh]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We ran into a "Login incorrect" problem when running the same rootfs
image across platforms with different loging ports ttyS0/1/2/3.
Simply assignning "console" to BR2_TARGET_GENERIC_GETTY_PORT, which in
turn modifies the /etc/inittab, is not enough because the "console" device
was missing in the /etc/securetty.
While current securetty has enumerated a lot of ttys, this patch should save
some efforts to enumerate more.
[Peter: guard with single quotes]
Signed-off-by: Tzu-Jung Lee <tjlee@ambarella.com>
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Otherwise, graph-depends tries to call 'make target-purgelocales-show-depends',
which does not exist, as 'target-purgelocales' is not an actual package.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The graph-depends script tries to call 'make target-generic-dont-remount-rw',
which doesn't exist since 'target-generic-dont-remount-rw' is not a package.
See also the comments for commit 72bd61e5b8c2094378.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Script generating the target and host package tables, and the deprecated
stuff list as well. These tables and lists are generated parsing the
Config.in files.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
[yann.morin.1998@free.fr: no leading dot, no menu path for host-utils]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
[yann.morin.1998@free.fr: rename readme so it is obvious it's about kconfiglib]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Packages that install daemons may need those daemons to run as a non-root,
or an otherwise non-system (eg. 'daemon'), user.
Add infrastructure for packages to create users, by declaring the FOO_USERS
variable that contain a makedev-syntax-like description of the user(s) to
add.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Cam Hutchison <camh@xdna.net>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
[yann.morin.1998@free.fr: space-damage]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since the introduction of the post-image mechanism, the graph-depends
script is broken: it tries to call 'make
target-post-image-show-depends', which doesn't exist since
'target-post-image' is not a package.
So we should simply ignore this 'target-post-image'.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This mechanism of root filesystem customization has been deprecated
since a long time, so let's remove it now.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: "Samuel Martin" <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As requested by Peter, add a bit of documentation in the
eclipse-register-toolchain script, and add a few more checks (even
though this script is not intended to be executed manually, which is
also now mentionned in the documentation).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The Eclipse plugin at
https://github.com/mbats/eclipse-buildroot-toolchain-plugin allows
users of Eclipse to easily use the toolchain available in
Buildroot. To do so, this plugin reads
~/.buildroot-eclipse.toolchains, which contains the list of Buildroot
toolchains available on the system, and then offer those toolchains to
compile Eclipse projects.
In order to interface with this plugin, this commit adds an option
that allows the user to tell whether (s)he wants the Buildroot project
toolchain to be visible under this Eclipse plugin. It simply adds a
line in this ~/.buildroot-eclipse.toolchains file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Following Gustavo's removal of two X.org drivers for old hardware
unlikely to be used in embedded contexts, the xorg-release script now
reports those two X.org packages as "to be added": they exist in
X.org, but not in Buildroot.
So, we add a small list, XORG_EXCEPTIONS, in our xorg-release script,
to list the X.org packages we don't want to hear about. Of course,
packages that exist in X.org, and that are not part of this exception
list, and are not packaged in Buildroot are still listed as "to be
added".
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This script generates a report on the packaging status of X.org
releases in Buildroot. It does so by downloading the list of tarballs
that are part of a given X.org release, and compare that with the
packages that are available in Buildroot.
[Peter: drop .py suffix, make executable]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add the root-password internal target to the exclusion list.
Fixes failures like:
Getting dependencies for [... 'target-root-passwd' ...]
Error getting dependencies [... 'target-root-passwd' ...]
Which is easily singled out with:
$ make target-root-passwd-show-depends
make[1]: *** No rule to make target `target-root-passwd-show-depends'.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The "unknown" packages mechanism was used to render packages that did
not implement the make <pkg>-show-depends target, i.e the packages
that were not yet converted to one of the package infrastructures.
Since now all packages have been converted, we can remove this
"unknown" packages feature.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since 9bc7b1d4ae, all X.org .mk files
are parsed unconditionally, even if BR2_PACKAGE_XORG7 is disabled.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Until now, graph-depends was calling "make <pkg>-show-depends"
individually for eack package, which was very slow. Now, it calls
"make <pkg1>-show-depends <pkg2>-show-depends ... <pkgN>-show-depends"
for all packages it knows, and then does that recursively. It reduces
the number of make invocations to the deepest dependency chain in the
current configuration, instead of having a number of make invocations
equal to the number of enabled packages.
For a configuration with xvkbd enabled (which brings a significant
number of X.org dependencies) and a tar root filesystem, the time to
execute graph-depends was:
real 5m14.944s
user 4m53.590s
sys 0m14.069s
After our optimizations, it is now:
real 0m33.096s
user 0m30.878s
sys 0m1.472s
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In preparation for more graph-depends improvements, use a
TARGET_EXCEPTIONS list to list all the targets that should be ignored
while building the dependency graph.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When doing a full graph of the dependencies, graph-depends starts by
doing a "make show-targets", which lists all the packages registered
in the $(TARGETS) variable. This variable contains all packages that
are enabled according to the .config file. Then, for each of those
packages, we used to create a "all" -> "package" dependency, even if
in fact most of some packages are already dependencies of other
packages. This creates a needlessly complex dependency graph.
This patch modifies graph-depends so that it filters out the unneeded
"all" -> "package" dependencies when "package" is already the
dependency of another package.
For example, if you have a configuration with libpng (which selects
zlib), "make show-targets" displays "libpng zlib", so graph-depends
used to create the following dependencies: (all -> libpng, all ->
zlib, libpng -> zlib). However, the (all -> zlib) dependency is not
really needed, as zlib is already the dependency of libpng. Those
dependencies are now filtered out.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
At the top of the output html page there is a dangling "results" link.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
graph-depends calls make to get the list of packages, and the
dependencies of each package.
When called out-of-tree, the Makefile is a wrapper that calls
the real Makefile, so make will spit out a line like:
make -C /path/to/buildroot O=/path/to/build-dir show-targets
which graph-depends wrongly believes is part of the target list.
Be silent when calling make, as we really only want the target
and dependency lists.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since on some packages we are adding <pkg>_LICENSE but not necessarily
<pkg>_LICENSE_FILES, let's add a separate statistic to track these
informations. This will allow us to improve both the number of
packages covered by <pkg>_LICENSE and <pkg>_LICENSE_FILES.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For alignement reasons, we sometimes add spaces between <pkg>_LICENSE
and the equal sign. Take this into account in pkg-stats.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that most packages have been converted over to package
infrastructures, keep only one column to show the package
infrastructures.
A new column, showing of the package has license information, has been
added. This will help in increasing the number of packages having
license metadata.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With the introduction of a specific macro for host targets, it was decided
to also make the names of the macros more intuitive: generic-package,
autotools-package and cmake-package.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Create host-generic-package, host-autotools-package and
host-cmake-package macros. Such a macro is more intuitive to use than
the $(call ...,host) construct. Also it speeds things up by having
one less $(call ...) evaluation.
Also includes documentation update, but not for buildroot.html.
This brings the time for 'make -qp' (which is used by bash-completion)
down from 1.85s to 1.35s on my laptop.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The patch pattern was expanded before being into the patch directory so the
expansion can add incorrect files.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Recursivity is needed with some tarballs containing debian patches:
.
debian
changelog
control
patches
02-COPYRIGHT.patch
[...]
Since we can find some files which are not patches in those directories, only
consider .patch* and .diff* files as valid patches.
Due to recursivity, strip-components option is no more necessary so it has
been removed.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If a series file is present use it to determine the proper order to apply
patches instead of using ls sorting order.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com>
add a series file with a wrong patch order into an archive containing several
patches whose correct order is the alphabetical one
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The way archives were managed was incorrect because the uncompressed archives
were sent directly to the patch command. It means that alphabetical patch
order was not respected.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com>
with an armadeus_apf9328_defconfig build
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When a directory is found in patchdir, it is skipped.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com>
with an armadeus_apf9328_defconfig build
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
targetdir is not the output/target directory as it can suggest.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com>
with an armadeus_apf9328_defconfig build
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: .rej files might be in subdirs, so just do find .. | xargs rm]
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com>
with an armadeus_apf9328_defconfig build
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The "Patch count" cell needs rowspan=2, otherwise the host/target cells are
misaligned.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The variable convert_to_autotools is not used in the script. The correct
variables are convert_to_target_autotools and convert_to_host_autotools.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The package count, cnt, should start with an initial value of 0. It
is incremented as each package *.mk file is checked. Starting with a
value of 1 makes the first ID = 2 and results in the TOTAL being off
by 1.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Update the grep tests used to determine the package type.
The package name and directory are now worked out magically due to:
package: add helper functions to get package name and directory magically
Because of this the extra arguments were removed by patches:
package: remove useless arguments from GENTARGETS
package: remove useless arguments from AUTOTARGETS
package: remove useless arguments from CMAKETARGETS
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The CONFIG_UPDATE macro is no longer defined in
package/gnuconfig/gnuconfig.mk, but instead in
package/Makefile.autotools.in. It it also changed a little bit to take
the directory of the package sources as argument, and the AUTOTARGETS
infrastructure is updated to use this macro.
[Peter: drop echo in CONFIG_UPDATE]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The name "patch-kernel.sh" is a bit stupid, since this script is used
to patch everything in Buildroot, not only kernel trees.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
