pulseaudio documentation recommends not using the daemon mode unless you
are on a headless system, but since that is the common case for a
buildroot installation, install the related user and groups
[Peter: fix typos, ifeq check, unconditionally install into target]
Signed-off-by: Jérémy Rosen <jeremy.rosen@openwide.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We no longer support ARM less than v3 so kill dead code.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
No functional change.
[Peter: adjust commit message]
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libsndfile requires sizeof(sf_count_t) == 8, where sf_count_t is a
typedef alias for off_t. This is not true by default for all
tool-chains, which leads to a runtime assert failure in binaries
compiled against libsndfile. See:
http://permalink.gmane.org/gmane.comp.audio.libsndfile.devel/229
Add a dependency on BR2_LARGEFILE for libsndfile, and a comment if
BR2_LARGEFILE is not selected.
[Thomas: rebased patch, added more propagation of the new
BR2_LARGEFILE dependency to gst-plugins-good and mpd.]
Signed-off-by: Ryan Mallon <rmallon@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: License is GPLv2+, move out of package/multimedia]
Signed-off-by: Patrick Gerber <kpa_info@yahoo.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Finally get rid of all := used for variable definitions in packages,
as we suggest in our manual and during the review of new packages.
While I was at it, I also sometimes added a few missing new lines
between the header and the first variable definition.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fix missing comma in DEPENDENCIES, causing to pull in libiconv when it
wasn't necessary and causing other packages to go crazy on (e)glibc
toolchains which don't need it with libiconv being present. Fixes:
http://autobuild.buildroot.org/results/e0ce086a33a1db6fee77f43356e4e94ed6941f17
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It may be desirable not to use the alsa sink for playback
even though alsa-lib is installed. So make this a configuration
option. This also takes care of selecting the proper options
for alsa-lib
(BR2_PACKAGE_ALSA_LIB_MIXER and BR2_PACKAGE_ALSA_LIB_PCM).
[Peter: fix indentation]
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Newer versions of binutils (2.22+) default to --no-copy-dt-needed hence
all the used libraries must be explicitly named.
This is accounted for in the source configure script but not in the
compiled form so we just need to autoreconf it.
[Peter: add comment why autoconf is needed]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The ffmpeg configure script tries to autodetermine ARM optimizations by
building a small code snippet with AS.
If AS allows higher-level (>generic) assembly instructions then it
passes and enables the relevant optimization path.
Some toolchains allow/default to more than generic asm and then fail
when the real code is built.
Fixes:
http://autobuild.buildroot.net/results/b6e1225a07a58cc7544e37bc55675be71e2b5088/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
MPlayer wants to have some "support" for each architecture, and for
now, it doesn't know about Microblaze and AArch64, so prevent the
selection of MPlayer on those architectures.
For Microblaze, fixes:
http://autobuild.buildroot.org/results/4e6e0d15694345ded649c92251cc2173dc45fe7c/build-end.log
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The plugin registry can take a while to be generated when GStreamer is
initialized. Turning it off can speed up up GStreamer application launch
times. Default behaviour is unchanged.
Signed-off-by: Tim Sheridan <tim.sheridan@imgtec.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This sets paths to dvdread-config and dvdnav-config,
and configuration options to enable external libdvdread
and libdvdnav support.
Signed-off-by: Valentine Barshak <gvaxon@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Some parts of alsa-lib correctly use threads only when available, but
some other parts, especially certain PCM plugins, unconditionally
require threads. While it would certainly be possible to fix alsa-lib
to only use threads when available, it probably doesn't make much
sense, since on an embedded system that has audio, we are probably
powerful enough to enable thread support in the C library.
Fixes:
http://autobuild.buildroot.org/results/e14469be7f6171f4c8c0c09c8e32943819f7938b/build-end.log
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In its Config.in, pulseaudio declares a dependency on gettext
using the documented construct:
select BR2_PACKAGE_GETTEXT if BR2_NEEDS_GETTEXT
but in its .mk file, declares a dependency on the package:
PULSEAUDIO_DEPENDENCIES = [...] $(if $(BR2_PACKAGE_GETTEXT),gettext) [...]
instead of the documented:
$(if $(BR2_NEEDS_GETTEXT),gettext)
Fix that.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
CC: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
From now on, packages only need to select the BR2_PACKAGE_GETTEXT
option and depend on the 'gettext' package to get the necessary i18n
libraries installed on the target.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: remove BR2_PACKAGE_LIBINTL]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
CC: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The mplayer configure script says that sh4a is not supported,
according to:
http://autobuild.buildroot.org/results/c6457c2dea7c1df4d8e0f23995ebfb3285a85aed/build-end.log
Apparently, sh4 is supported, but not sh4a, even though it seems that
sh4a is a super-set of sh4. So it would probably not be too difficult
to get mplayer to build/work for sh4a, but we don't have hardware to
test this easily, and we can leave this work to the first developer
who will need mplayer on sh4a: let's only support what the upstream
package supports.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
