Let's also reorder BR2_UBOOT_ options by moving
BR2_TARGET_UBOOT_FORMAT_DTB_IMX after BR2_TARGET_UBOOT_NEEDS_OPENSSL since
this reflects the order in boot/uboot/Config.in file.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The size of xipImage has grown by 84KB but there are still 278KB left
before running out of 2MB of flash memory.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
During the last U-boot version bump it's not been noted that the TPL
was not prepended to SPL anymore preventing the board to boot, so
let's copy TPL to the image folder, prepend it to u-boot-spl-dtb.bin
and place it at offset 32KB, where RK3288 bootrom expects to find
it. Let's also place u-boot-dtb separated from SPL at offset 8M, where
the SPL expects it to find it.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Migrate versal-firmware package from nealfrager github to Xilinx github.
The images are identical, so this patch has zero impact on functionality.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Starting from version 2021.10 only distro booting is supported, as
reported by commit ff8f277e9121 ("ti: am335x_evm: Switch to DISTRO_BOOT only").
The patch allows to update U-Boot to versions later than 2021.10.
Tested on beaglebone black.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The previous version failed to boot from sd card with a log reported by
the document [1]. In my case it always failed, a 100% failure against
75% reported by the document.
Instead of adding the patch to fix the problem, I preferred to update
the kernel version.
Tested on beaglebone black.
[1] https://forum.beagleboard.org/t/5-10-x-beaglebone-black-fails-to-boot-from-sd-card/33297
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Linux 6.1.9 installs more modules and this makes rootfs size to increase
and the default 60M size is not enough. So let's expand rootfs size to
120M.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a defconfig to build a 32b ARMv7-A U-Boot based firmware implementing
the subset of UEFI defined by EBBR[1], as well as a Linux OS disk image
booting with UEFI, to run on Qemu.
The generated firmware binary can also be used to install or run another OS
supporting the EBBR specification.
[1]: https://github.com/ARM-software/ebbr
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit adds support for the BeagleBone Green Wireless to the
existing beaglebone_defconfig, by making sure the relevant Device Tree
is built and installed.
Signed-off-by: Ramon Crichlow <rcrichlow9000@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
BSH SMM S2 PRO (SystemMaster S2 Pro) Board is an add-on board which
provide input and output interfaces to a dedicated carrier board. It is
designed mainly to provide graphical/video and connectivity interfaces
to the appliance.
Board support package includes the following components:
- mainline Linux kernel 6.1.6
- mainline U-Boot 2022-07
- Default packages from buildroot
https://www.apertis.org/reference_hardware/imx8mn_bsh_smm_s2pro_setup/
Add Ariel D'Alessandro and Dario Binacchi as co-maintainer, we work
together on platform mainline
Build and tested using:
docker pull registry.gitlab.com/buildroot.org/buildroot/base:20220105.2314
Cc: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Heiko Thiery <heiko.thiery@gmail.com>
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Tested-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
BSH SMM S2 (SystemMaster S2) Board is an add-on board which provide
input and output interfaces to a dedicated carrier board. It is designed
mainly to provide graphical/video and connectivity interfaces to the
appliance.
Board support package includes the following components:
- mainline Linux kernel 6.1.6
- mainline U-Boot 2022-07
- default packages from buildroot
https://www.apertis.org/reference_hardware/imx8mn_bsh_smm_s2pro_setup/
The smm s2 board is basically the same as the pro except it boots from
NAND instead of eMMC.
Co-authored-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The updated device tree is provided by Acme Systems:
https://www.acmesystems.it/compile_kernel_5_15
It is released under GPLv2 or later.
Signed-off-by: Edgar Bonet <bonet@grenoble.cnrs.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Migrate zcu106_pmufw.elf location from nealfrager github to Xilinx github.
The image is identical, so this patch has zero impact on functionality.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Migrate zcu102_pmufw.elf location from nealfrager github to Xilinx github.
The image is identical, so this patch has zero impact on functionality.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Migrate kv260_pmufw.elf location from nealfrager github to Xilinx github.
The image is identical, so this patch has zero impact on functionality.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Follow changes to other OrangePi boards, most importantly
orangepi-zero-plus2, which this board support is based on. This includes
switching to extlinux as boot mechanism and dropping custom U-Boot boot
script.
Rootfs image no longer fits into default 60M (mostly due to Linux
modules), so increase it to 120M.
While at it, bump Linux to 6.1.4 and U-Boot to 2023.01.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Linux DTS name has changed for the zynqmp_kria_kv260 with Xilinx 2022.2.
smk-k26-revA-sck-kv-g-revB has become zynqmp-smk-k26-revA-sck-kv-g-revB.
This DTS corresponds to generating the zynqmp-smk-k26-revA.dtb for the k26 som
and applying the zynqmp-sck-kv-g-revB.dtbo for the kv260 carrier board.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3477506541
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When using the buildroot compiler, it builds the u-boot.itb immediately
after building the fit-dtb.blob. This causes a build failure when using
the CONFIG_MULTI_DTB_FIT build configuration. This patch adds the necessary
dependency to guarantee that the fit-dtb.blob has finished building before
trying to build the u-boot.itb.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3310463281
This patch has been submitted to u-boot mainline:
https://lore.kernel.org/all/20221221075446.47141-1-neal.frager@amd.com/
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
NXP moved all its open source code repositories from Code Aurora Forum
to github. See for example:
39bc4d8196
Software packages are now grouped in several NXP github
projects/organizations (nxp-imx, nxp-qoriq, ...). See:
https://www.nxp.com/design/software/embedded-software/nxp-github:NXP-GITHUB
The NXP code published on Code Aurora is still present (at the time of
this commit) but is no longer receiving updates. It is also expected
to be shut down on 2023-03-31. The Code Aurora website
https://source.codeaurora.org/ currently show the following message:
"""
Note: Qualcomm Innovation Center Inc. maintained repositories have
migrated to git.codelinaro.org. QUIC repositories on this site will
not receive any updates after March 31, 2022, and will be deleted on
March 31, 2023. If your project depends on these repositories, please
adjust your tooling configuration to use the new, up-to-date project
location.
"""
For this reason, the NXP recipes using codeaurora.org urls need to be
updated to the correct github.com replacement.
Note: this commit does not change the component version. Only the
download URL is updated. The archive content is expected to be the
same.
Note 2: this commit updates the Kernel, U-Boot and ATF download urls.
The method is also changed from _CUSTOM_GIT to _CUSTOM_TARBALL.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Reviewed-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
NXP moved all its open source code repositories from Code Aurora Forum
to github. See for example:
39bc4d8196
Software packages are now grouped in several NXP github
projects/organizations (nxp-imx, nxp-qoriq, ...). See:
https://www.nxp.com/design/software/embedded-software/nxp-github:NXP-GITHUB
The NXP code published on Code Aurora is still present (at the time of
this commit) but is no longer receiving updates. It is also expected
to be shut down on 2023-03-31. The Code Aurora website
https://source.codeaurora.org/ currently show the following message:
"""
Note: Qualcomm Innovation Center Inc. maintained repositories have
migrated to git.codelinaro.org. QUIC repositories on this site will
not receive any updates after March 31, 2022, and will be deleted on
March 31, 2023. If your project depends on these repositories, please
adjust your tooling configuration to use the new, up-to-date project
location.
"""
For this reason, the NXP recipes using codeaurora.org urls need to be
updated to the correct github.com replacement.
Note: this commit does not change the component version. Only the
download URL is updated. The archive content is expected to be the
same.
Note 2: this commit updates the U-Boot and ATF download urls.
The method is also changed from _CUSTOM_GIT to _CUSTOM_TARBALL.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
NXP moved all its open source code repositories from Code Aurora Forum
to github. See for example:
39bc4d8196
Software packages are now grouped in several NXP github
projects/organizations (nxp-imx, nxp-qoriq, ...). See:
https://www.nxp.com/design/software/embedded-software/nxp-github:NXP-GITHUB
The NXP code published on Code Aurora is still present (at the time of
this commit) but is no longer receiving updates. It is also expected
to be shut down on 2023-03-31. The Code Aurora website
https://source.codeaurora.org/ currently show the following message:
"""
Note: Qualcomm Innovation Center Inc. maintained repositories have
migrated to git.codelinaro.org. QUIC repositories on this site will
not receive any updates after March 31, 2022, and will be deleted on
March 31, 2023. If your project depends on these repositories, please
adjust your tooling configuration to use the new, up-to-date project
location.
"""
For this reason, the NXP recipes using codeaurora.org urls need to be
updated to the correct github.com replacement.
Note: this commit does not change the component version. Only the
download URL is updated. The archive content is expected to be the
same.
Note 2: this commit updates only the ATF download urls.
The method is also changed from _CUSTOM_GIT to _CUSTOM_TARBALL.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
NXP moved all its open source code repositories from Code Aurora Forum
to github. See for example:
39bc4d8196
Software packages are now grouped in several NXP github
projects/organizations (nxp-imx, nxp-qoriq, ...). See:
https://www.nxp.com/design/software/embedded-software/nxp-github:NXP-GITHUB
The NXP code published on Code Aurora is still present (at the time of
this commit) but is no longer receiving updates. It is also expected
to be shut down on 2023-03-31. The Code Aurora website
https://source.codeaurora.org/ currently show the following message:
"""
Note: Qualcomm Innovation Center Inc. maintained repositories have
migrated to git.codelinaro.org. QUIC repositories on this site will
not receive any updates after March 31, 2022, and will be deleted on
March 31, 2023. If your project depends on these repositories, please
adjust your tooling configuration to use the new, up-to-date project
location.
"""
For this reason, the NXP recipes using codeaurora.org urls need to be
updated to the correct github.com replacement.
Note: this commit does not change the component version. Only the
download URL is updated. The archive content is expected to be the
same.
Note 2: this commit updates only the ATF download urls.
The method is also changed from _CUSTOM_GIT to _CUSTOM_TARBALL.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
NXP moved all its open source code repositories from Code Aurora Forum
to github. See for example:
39bc4d8196
Software packages are now grouped in several NXP github
projects/organizations (nxp-imx, nxp-qoriq, ...). See:
https://www.nxp.com/design/software/embedded-software/nxp-github:NXP-GITHUB
The NXP code published on Code Aurora is still present (at the time of
this commit) but is no longer receiving updates. It is also expected
to be shut down on 2023-03-31. The Code Aurora website
https://source.codeaurora.org/ currently show the following message:
"""
Note: Qualcomm Innovation Center Inc. maintained repositories have
migrated to git.codelinaro.org. QUIC repositories on this site will
not receive any updates after March 31, 2022, and will be deleted on
March 31, 2023. If your project depends on these repositories, please
adjust your tooling configuration to use the new, up-to-date project
location.
"""
For this reason, the NXP recipes using codeaurora.org urls need to be
updated to the correct github.com replacement.
Note: this commit does not change the component version. Only the
download URL is updated. The archive content is expected to be the
same.
Note 2: this commit updates the Kernel, U-Boot and ATF download urls.
The method is also changed from _CUSTOM_GIT to _CUSTOM_TARBALL.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
NXP moved all its open source code repositories from Code Aurora Forum
to github. See for example:
39bc4d8196
Software packages are now grouped in several NXP github
projects/organizations (nxp-imx, nxp-qoriq, ...). See:
https://www.nxp.com/design/software/embedded-software/nxp-github:NXP-GITHUB
The NXP code published on Code Aurora is still present (at the time of
this commit) but is no longer receiving updates. It is also expected
to be shut down on 2023-03-31. The Code Aurora website
https://source.codeaurora.org/ currently show the following message:
"""
Note: Qualcomm Innovation Center Inc. maintained repositories have
migrated to git.codelinaro.org. QUIC repositories on this site will
not receive any updates after March 31, 2022, and will be deleted on
March 31, 2023. If your project depends on these repositories, please
adjust your tooling configuration to use the new, up-to-date project
location.
"""
For this reason, the NXP recipes using codeaurora.org urls need to be
updated to the correct github.com replacement.
Note: this commit does not change the component version. Only the
download URL is updated. The archive content is expected to be the
same.
Note 2: this commit updates the Kernel, U-Boot and ATF download urls.
The method is also changed from _CUSTOM_GIT to _CUSTOM_TARBALL.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
NXP moved all its open source code repositories from Code Aurora Forum
to github. See for example:
39bc4d8196
Software packages are now grouped in several NXP github
projects/organizations (nxp-imx, nxp-qoriq, ...). See:
https://www.nxp.com/design/software/embedded-software/nxp-github:NXP-GITHUB
The NXP code published on Code Aurora is still present (at the time of
this commit) but is no longer receiving updates. It is also expected
to be shut down on 2023-03-31. The Code Aurora website
https://source.codeaurora.org/ currently show the following message:
"""
Note: Qualcomm Innovation Center Inc. maintained repositories have
migrated to git.codelinaro.org. QUIC repositories on this site will
not receive any updates after March 31, 2022, and will be deleted on
March 31, 2023. If your project depends on these repositories, please
adjust your tooling configuration to use the new, up-to-date project
location.
"""
For this reason, the NXP recipes using codeaurora.org urls need to be
updated to the correct github.com replacement.
Note: this commit does not change the component version. Only the
download URL is updated. The archive content is expected to be the
same.
Note 2: this commit updates the Kernel, U-Boot and ATF download urls.
The method is also changed from _CUSTOM_GIT to _CUSTOM_TARBALL.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
NXP moved all its open source code repositories from Code Aurora Forum
to github. See for example:
39bc4d8196
Software packages are now grouped in several NXP github
projects/organizations (nxp-imx, nxp-qoriq, ...). See:
https://www.nxp.com/design/software/embedded-software/nxp-github:NXP-GITHUB
The NXP code published on Code Aurora is still present (at the time of
this commit) but is no longer receiving updates. It is also expected
to be shut down on 2023-03-31. The Code Aurora website
https://source.codeaurora.org/ currently show the following message:
"""
Note: Qualcomm Innovation Center Inc. maintained repositories have
migrated to git.codelinaro.org. QUIC repositories on this site will
not receive any updates after March 31, 2022, and will be deleted on
March 31, 2023. If your project depends on these repositories, please
adjust your tooling configuration to use the new, up-to-date project
location.
"""
For this reason, the NXP recipes using codeaurora.org urls need to be
updated to the correct github.com replacement.
Note: this commit does not change the component version. Only the
download URL is updated. The archive content is expected to be the
same.
Note 2: this commit updates the Kernel, U-Boot and ATF download urls.
The method is also changed from _CUSTOM_GIT to _CUSTOM_TARBALL.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
NXP moved all its open source code repositories from Code Aurora Forum
to github. See for example:
39bc4d8196
Software packages are now grouped in several NXP github
projects/organizations (nxp-imx, nxp-qoriq, ...). See:
https://www.nxp.com/design/software/embedded-software/nxp-github:NXP-GITHUB
The NXP code published on Code Aurora is still present (at the time of
this commit) but is no longer receiving updates. It is also expected
to be shut down on 2023-03-31. The Code Aurora website
https://source.codeaurora.org/ currently show the following message:
"""
Note: Qualcomm Innovation Center Inc. maintained repositories have
migrated to git.codelinaro.org. QUIC repositories on this site will
not receive any updates after March 31, 2022, and will be deleted on
March 31, 2023. If your project depends on these repositories, please
adjust your tooling configuration to use the new, up-to-date project
location.
"""
For this reason, the NXP recipes using codeaurora.org urls need to be
updated to the correct github.com replacement.
Note: this commit does not change the component version. Only the
download URL is updated. The archive content is expected to be the
same.
Note 2: this commit updates the Kernel, U-Boot and ATF download urls.
The method is also changed from _CUSTOM_GIT to _CUSTOM_TARBALL.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
NXP moved all its open source code repositories from Code Aurora Forum
to github. See for example:
39bc4d8196
Software packages are now grouped in several NXP github
projects/organizations (nxp-imx, nxp-qoriq, ...). See:
https://www.nxp.com/design/software/embedded-software/nxp-github:NXP-GITHUB
The NXP code published on Code Aurora is still present (at the time of
this commit) but is no longer receiving updates. It is also expected
to be shut down on 2023-03-31. The Code Aurora website
https://source.codeaurora.org/ currently show the following message:
"""
Note: Qualcomm Innovation Center Inc. maintained repositories have
migrated to git.codelinaro.org. QUIC repositories on this site will
not receive any updates after March 31, 2022, and will be deleted on
March 31, 2023. If your project depends on these repositories, please
adjust your tooling configuration to use the new, up-to-date project
location.
"""
For this reason, the NXP recipes using codeaurora.org urls need to be
updated to the correct github.com replacement.
Note: this commit does not change the component version. Only the
download URL is updated. The archive content is expected to be the
same.
Note 2: this commit updates the Kernel, U-Boot and ATF download urls.
The method is also changed from _CUSTOM_GIT to _CUSTOM_TARBALL.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
NXP moved all its open source code repositories from Code Aurora Forum
to github. See for example:
39bc4d8196
Software packages are now grouped in several NXP github
projects/organizations (nxp-imx, nxp-qoriq, ...). See:
https://www.nxp.com/design/software/embedded-software/nxp-github:NXP-GITHUB
The NXP code published on Code Aurora is still present (at the time of
this commit) but is no longer receiving updates. It is also expected
to be shut down on 2023-03-31. The Code Aurora website
https://source.codeaurora.org/ currently show the following message:
"""
Note: Qualcomm Innovation Center Inc. maintained repositories have
migrated to git.codelinaro.org. QUIC repositories on this site will
not receive any updates after March 31, 2022, and will be deleted on
March 31, 2023. If your project depends on these repositories, please
adjust your tooling configuration to use the new, up-to-date project
location.
"""
For this reason, the NXP recipes using codeaurora.org urls need to be
updated to the correct github.com replacement.
Note: this commit does not change the component version. Only the
download URL is updated. The archive content is expected to be the
same.
Note 2: this commit updates the Kernel and U-Boot download urls.
The method is also changed from _CUSTOM_GIT to _CUSTOM_TARBALL.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
NXP moved all its open source code repositories from Code Aurora Forum
to github. See for example:
39bc4d8196
Software packages are now grouped in several NXP github
projects/organizations (nxp-imx, nxp-qoriq, ...). See:
https://www.nxp.com/design/software/embedded-software/nxp-github:NXP-GITHUB
The NXP code published on Code Aurora is still present (at the time of
this commit) but is no longer receiving updates. It is also expected
to be shut down on 2023-03-31. The Code Aurora website
https://source.codeaurora.org/ currently show the following message:
"""
Note: Qualcomm Innovation Center Inc. maintained repositories have
migrated to git.codelinaro.org. QUIC repositories on this site will
not receive any updates after March 31, 2022, and will be deleted on
March 31, 2023. If your project depends on these repositories, please
adjust your tooling configuration to use the new, up-to-date project
location.
"""
For this reason, the NXP recipes using codeaurora.org urls need to be
updated to the correct github.com replacement.
Note: this commit does not change the component version. Only the
download URL is updated. The archive content is expected to be the
same.
Note 2: this commit updates the Kernel and U-Boot download urls.
The method is also changed from _CUSTOM_GIT to _CUSTOM_TARBALL.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
NXP moved all its open source code repositories from Code Aurora Forum
to github. See for example:
39bc4d8196
Software packages are now grouped in several NXP github
projects/organizations (nxp-imx, nxp-qoriq, ...). See:
https://www.nxp.com/design/software/embedded-software/nxp-github:NXP-GITHUB
The NXP code published on Code Aurora is still present (at the time of
this commit) but is no longer receiving updates. It is also expected
to be shut down on 2023-03-31. The Code Aurora website
https://source.codeaurora.org/ currently show the following message:
"""
Note: Qualcomm Innovation Center Inc. maintained repositories have
migrated to git.codelinaro.org. QUIC repositories on this site will
not receive any updates after March 31, 2022, and will be deleted on
March 31, 2023. If your project depends on these repositories, please
adjust your tooling configuration to use the new, up-to-date project
location.
"""
For this reason, the NXP recipes using codeaurora.org urls need to be
updated to the correct github.com replacement.
Note: this commit does not change the component version. Only the
download URL is updated. The archive content is expected to be the
same.
Note 2: this commit updates the Kernel and U-Boot download urls.
The method is also changed from _CUSTOM_GIT to _CUSTOM_TARBALL.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
NXP moved all its open source code repositories from Code Aurora Forum
to github. See for example:
39bc4d8196
Software packages are now grouped in several NXP github
projects/organizations (nxp-imx, nxp-qoriq, ...). See:
https://www.nxp.com/design/software/embedded-software/nxp-github:NXP-GITHUB
The NXP code published on Code Aurora is still present (at the time of
this commit) but is no longer receiving updates. It is also expected
to be shut down on 2023-03-31. The Code Aurora website
https://source.codeaurora.org/ currently show the following message:
"""
Note: Qualcomm Innovation Center Inc. maintained repositories have
migrated to git.codelinaro.org. QUIC repositories on this site will
not receive any updates after March 31, 2022, and will be deleted on
March 31, 2023. If your project depends on these repositories, please
adjust your tooling configuration to use the new, up-to-date project
location.
"""
For this reason, the NXP recipes using codeaurora.org urls need to be
updated to the correct github.com replacement.
Note: this commit does not change the component version. Only the
download URL is updated. The archive content is expected to be the
same.
Note 2: this commit updates the Kernel and U-Boot download urls.
The method is also changed from _CUSTOM_GIT to _CUSTOM_TARBALL.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
NXP moved all its open source code repositories from Code Aurora Forum
to github. See for example:
39bc4d8196
Software packages are now grouped in several NXP github
projects/organizations (nxp-imx, nxp-qoriq, ...). See:
https://www.nxp.com/design/software/embedded-software/nxp-github:NXP-GITHUB
The NXP code published on Code Aurora is still present (at the time of
this commit) but is no longer receiving updates. It is also expected
to be shut down on 2023-03-31. The Code Aurora website
https://source.codeaurora.org/ currently show the following message:
"""
Note: Qualcomm Innovation Center Inc. maintained repositories have
migrated to git.codelinaro.org. QUIC repositories on this site will
not receive any updates after March 31, 2022, and will be deleted on
March 31, 2023. If your project depends on these repositories, please
adjust your tooling configuration to use the new, up-to-date project
location.
"""
For this reason, the NXP recipes using codeaurora.org urls need to be
updated to the correct github.com replacement.
Note: this commit does not change the component version. Only the
download URL is updated. The archive content is expected to be the
same.
Note 2: this commit updates the Kernel and U-Boot download urls.
The method is also changed from _CUSTOM_GIT to _CUSTOM_TARBALL.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
NXP moved all its open source code repositories from Code Aurora Forum
to github. See for example:
39bc4d8196
Software packages are now grouped in several NXP github
projects/organizations (nxp-imx, nxp-qoriq, ...). See:
https://www.nxp.com/design/software/embedded-software/nxp-github:NXP-GITHUB
The NXP code published on Code Aurora is still present (at the time of
this commit) but is no longer receiving updates. It is also expected
to be shut down on 2023-03-31. The Code Aurora website
https://source.codeaurora.org/ currently show the following message:
"""
Note: Qualcomm Innovation Center Inc. maintained repositories have
migrated to git.codelinaro.org. QUIC repositories on this site will
not receive any updates after March 31, 2022, and will be deleted on
March 31, 2023. If your project depends on these repositories, please
adjust your tooling configuration to use the new, up-to-date project
location.
"""
For this reason, the NXP recipes using codeaurora.org urls need to be
updated to the correct github.com replacement.
Note: this commit does not change the component version. Only the
download URL is updated. The archive content is expected to be the
same.
Note 2: this commit updates the Kernel and U-Boot download urls.
The method is also changed from _CUSTOM_GIT to _CUSTOM_TARBALL.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
NXP moved all its open source code repositories from Code Aurora Forum
to github. See for example:
39bc4d8196
Software packages are now grouped in several NXP github
projects/organizations (nxp-imx, nxp-qoriq, ...). See:
https://www.nxp.com/design/software/embedded-software/nxp-github:NXP-GITHUB
The NXP code published on Code Aurora is still present (at the time of
this commit) but is no longer receiving updates. It is also expected
to be shut down on 2023-03-31. The Code Aurora website
https://source.codeaurora.org/ currently show the following message:
"""
Note: Qualcomm Innovation Center Inc. maintained repositories have
migrated to git.codelinaro.org. QUIC repositories on this site will
not receive any updates after March 31, 2022, and will be deleted on
March 31, 2023. If your project depends on these repositories, please
adjust your tooling configuration to use the new, up-to-date project
location.
"""
For this reason, the NXP recipes using codeaurora.org urls need to be
updated to the correct github.com replacement.
Note: this commit does not change the component version. Only the
download URL is updated. The archive content is expected to be the
same.
Note 2: this commit updates the Kernel and U-Boot download urls.
The method is also changed from _CUSTOM_GIT to _CUSTOM_TARBALL.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The kernel used is based on 6.1-rc3, so use the recently introduced 6.1
kernel headers version to fix a build issue:
Incorrect selection of kernel headers: expected 6.0.x, got 6.1.x
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The kernel used is based on 6.1-rc3, so use the recently introduced 6.1
kernel headers version to fix a build issue:
Incorrect selection of kernel headers: expected 6.0.x, got 6.1.x
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The kernel used is based on 6.1-rc3, so use the recently introduced 6.1
kernel headers version to fix a build issue:
Incorrect selection of kernel headers: expected 6.0.x, got 6.1.x
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a defconfig for the Starfive VisionFive2 board, a board built around the
Starfive JH7110 RISC-V 64bit SoC.
This board comes with functional lowlevel and U-Boot bootloaders in SPI
flash. The defconfig reuses these and only builds a (5.15 based) kernel and
rootfs.
The factory shipped U-Boot is hard coded to look at MMC partition 3.
Signed-off-by: Francois Dugast <francois.dugast.foss@gmail.com>
[Peter: add to DEVELOPERS]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Lichee RV Dock is a RISC-V Linux development kits with high integration,
small size and affordable price designed for opensource developer.
https://wiki.sipeed.com/hardware/en/lichee/RV/Dock.html
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Tested-by: Indrek Kruusa <indrek.kruusa@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Lichee RV - Nezha CM is a compute module with modular design, equipped
with Allwinner D1 chip (based on T-Head XuanTie C906 core), 512MB DDR3
RAM.
Board support is based on the nezha defconfig already available in
buildroot.
https://wiki.sipeed.com/hardware/en/lichee/RV/RV.htmlhttps://linux-sunxi.org/Sipeed_Lichee_RV
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Reviewed-by: Indrek Kruusa <indrek.kruusa@gmail.com>
Tested-by: Indrek Kruusa <indrek.kruusa@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is now based on Linux 6.1-rc3. We don't have an option for 6.1 yes, so
mark it as 6.0 headers.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The D1 support is now upstream, so we can use the upstream 1.1 release
instead of a custom version.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is now based on U-Boot 2022.10 and has gained SPL support, so use that
instead of sun20-d1-spl. With this we can also drop the u-boot patch and
patch directory.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch fixes a problem in the vck190 boot.bin generation as it should be
using the u-boot.dtb as the u-boot device tree and not the Linux system.dtb.
While both dtbs are basically the same, it is better not to mix this up.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since commit
5bbc20154e ("configs/zynqmp_kria_kv260_defconfig:
bump to Xilinx 2022.2"), we're using U-Boot version Xilinx 2022.2,
which already carries the psu_init_gpl.c, causing the build to fail as
our patch doesn't apply.
Fix this by dropping the no longer needed patch.
Fixes: 5bbc20154e ("configs/zynqmp_kria_kv260_defconfig: bump to Xilinx 2022.2")
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since commit
3c997c457a ("configs/zynqmp_zcu106_defconfig:
bump to Xilinx 2022.2"), we're using U-Boot version Xilinx 2022.2,
which already carries the psu_init_gpl.c, causing the build to fail as
our patch doesn't apply.
Fix this by dropping the no longer needed patch.
Fixes: 3c997c457a ("configs/zynqmp_zcu106_defconfig: bump to Xilinx 2022.2")
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch moves the board/zynqmp/kria/kv260/uboot.fragment file
to the board/zynqmp/kria directory. The reason is that this file
is the same for any kria starter kit and is not specific to the kv260.
By moving the file, it can be logically re-used with the kr260 when
support for this starter kit is added to buildroot.
KR260 Starter Kit:
https://www.xilinx.com/products/som/kria/kr260-robotics-starter-kit.html
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds support for Xilinx Versal VCK190 evaluation board.
VCK190 features can be found here:
https://www.xilinx.com/products/boards-and-kits/vck190.html
The VCK190 is based on the Xilinx Versal family:
https://www.xilinx.com/products/silicon-devices/acap/versal.html
The VC1902 included with the VCK190 evaluation board has Xilinx
AI Engine acclerators designed for accelerating machine learning
applications. Also included is an upgrade from prior Zynq and
ZynqMP families to ARM Cortex-A72 cores.
While the Linux kernel for Versal is quite similar to ZynqMP,
the boot process has significantly changed.
Triple-redundant MicroBlaze cores are used to boot and setup
Versal devices. For this reason, current buildroot support
will download pre-built firmware images and use Xilinx bootgen
to generate the boot.bin for the vck190.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 5370ec7451 was supposed to remove
the roc_pc_rk3399 defconfig. It actually removed everything related to
this defconfig, but not the defconfig itself.
The build failure this commit was supposed to fix is therefore still
happening. We fix it up by finally removing the defconfig.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3372859807
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch bumps following packages to the newer version:
- OpenSBI v1.1
- U-boot v2022.10
- Linux 6.0
Linux kernel is hosted on AndesTech Github which includes ethernet,
SD card, DMAC, RTC, WDT drivers support. OpenSBI is based on v1.1
with andes platfrom fdt driver.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Bump ATF to boundary-lf-5.15.52-2.1.0.
Signed-off-by: Chris Dimich <chris.dimich@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- U-Boot branch boundary-v2022.04 from Boundary repo.
Signed-off-by: Chris Dimich <chris.dimich@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Based on NXP 5.15.52-2.1.0 release.
Signed-off-by: Chris Dimich <chris.dimich@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add the host-qemu package to enable testing on gitlab.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 223516b51e (configs/kontron_bl_imx8mm: U-Boot needs util-linux)
added the needed dependency against host-util-linux, but missed an
earlier comment about u-boot still failing [0]
The U-Boot makefile for the host tools does not handle the
compiler/linker options properly. There are some patches [1][2] that fixes
that issue already applied in the newer U-Boot version 2022.10. So we have to
bump U-Boot to fix an autobuilder failure.
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/3267233833
[0] https://lore.kernel.org/buildroot/CAEyMn7Y3UgT-8dYY5rbnzcPfbGmqRVXG=joWx1fSSCC=WiFzbg@mail.gmail.com/
[1] U-Boot: a638bd349ea43825 (kbuild: add KBUILD_HOSTLDFLAGS to cmd_host-csingle)
[2] U-Boot: 31a7688cbe0ed5ed (tools: mkeficapsule: use pkg-config to get -luuid and -lgnutls)
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
[yann.morin.1998@free.fr:
- update commit log with reference to [0]
- slightly tweak commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes:
/usr/bin/ld: cannot find -lgnutls
/usr/bin/ld: cannot find -luuid
collect2: error: ld returned 1 exit status
when building U-Boot.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3301821264
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch bumps the zed to Xilinx release 2022.2.
Xilinx 2022.2 includes:
- U-Boot 2022.01 bug fixes
- Linux bump to Linux 5.15.36 with bug fixes
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch bumps the microzed to Xilinx release 2022.2.
Xilinx 2022.2 includes:
- U-Boot 2022.01 bug fixes
- Linux bump to Linux 5.15.36 with bug fixes
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch migrates the u-boot device tree definition
from uboot.fragment files to use BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS
instead for the zynqmp_kria_kv260_defconfig.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch migrates the u-boot device tree definition
from uboot.fragment files to use BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS
instead for the zynq_zc706, zynq_zed and zynq_microzed defconfigs.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This defconfig has been failing to build for several months, with
nobody stepping up to fix it. It's time to drop it.
See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this
defconfig.
This defconfig did not even have an entry in the DEVELOPERS file.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499140
Cc: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
