Tab instead of spaces
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Previously, a symlink was created to the uncompressed filesystem,
which made it a bit useless in case compression was chosen.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This will allow us to remove the unused ROOTFS_$(FSTYPE)_POST_GEN_HOOKS.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
genext2fs is built only if the user selected an ext2 root filesystem.
However, some use-cases can't live with the full target/ dir on the
root filesystem, and requires separate partitions (eg. for /usr).
In this case, the user would not select an ext2 root fs in the
Buildrooot menu, and would only generate a tarball of the rootfs.
This tarball would then be used from a post-image script to build
the actual required FSes.
But then, genext2fs is not built, since the ext2 root FS was not
selected.
As for the other filesystem generators, provide a host variant of
genext2fs (genext2fs is already host-package aware, so only needs
adding a Kconfig entry).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Turned out that setting a nil-UUID is no better than clearing it.
What currently happens is as follows:
- first, genext2fs does not generate a UUID
- then we tune2fs to upgrade the filesystem
- then we run fsck, which generates a random UUID
- then we re-run tune2fs to set a nil-UUID
So, on the target, if the file system is improperly unmounted (eg.
with a power failure), on next boot, fsck may be run, and a new
random UUID will be generated.
*However*, fsck improperly updates the filesystem when it adds the
UUID, and there are a few group descriptor checksum errors.
Those errors will go undetected until the next fsck, which will then
block for user input (bad on embedded systems, bad).
Fix that by systematically generating a random UUID _before_ we call
to fsck.
A random UUID is not so bad, after all, since there are already so
many sources of unpredictability in the filesystem: files date and
ordering, files content (date, paths...) which renders a fixed UUID
unneeded.
And it is still possible to set the UUID in a post-image script if
needed, anyway.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
"tune2fs -U clear" creates an invalid filesystem, that fsck.ext2
whines about later:
$ make rootfs-ext2
[--SNIP--]
$ ./host/usr/sbin/fsck.ext4 images/rootfs.ext2
e2fsck 1.42.7 (21-Jan-2013)
Filesystem did not have a UUID; generating one.
images/rootfs.ext2: clean, 4616/5120 files, 53171/131072 blocks
$ ./host/usr/sbin/fsck.ext4 -f images/rootfs.ext2
e2fsck 1.42.7 (21-Jan-2013)
One or more block group descriptor checksums are invalid. Fix<y>? yes
Group descriptor 0 checksum is 0x4131, should be 0x8bdb. FIXED.
[--SNIP--]
So we set an explicitly NULL UUID instead.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add support for LZO and XZ compression methods to cpio, ext2, tar and
ubifs filesystem targets.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
A quick test with a ~3.5MB ext4 filesystem shows that 1081 blocks isn't
enough:
tune2fs 1.42.7 (21-Jan-2013)
Please run e2fsck on the filesystem.
Creating journal inode:
Journal size too big for filesystem.
So bump it a bit. Overestimating the journal size is probably not really
a big deal for the kind of systems using ext3/4 anyway.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Set the count- and time-based checks intervals to 0, thus effectively
disabling automatic checks at boot (after a suggestion by Arnout).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Some bootloaders have a buggy ext2 support, and require ext2 rev1
instead of the traditional ext2 rev0 that genext2fs produces.
tune2fs accepts only one '-O list' at a time, so we need to construct
a list of -O options.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Use the host-e2fsprogs to tune2fs the generated rootfs.ext2 image,
and upgrade it to either one of ext2, ext3 or ext4.
Since calling tune2fs may require running e2fsck (tune2fs will warn
to do so when certain FS options are changed), we systematically call
e2fsck. This makes the code path simpler, and as a side-effect checks
that genext2fs did not generate garbage.
In turn, e2fsck will unconditionally add a UUID to the filesystem,
which is bad for reproducibility, so we call tune2fs again to remove
the UUID. This does not require checking the filesystem.
To ensure compatibility of Buildroot's .config, leave ext2 as the
default. Boards' .config can override this at will.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Use a 'if...endif' construct instead of repeating the
'depends on' for each symbols.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Arnout Vandecappelle <arnout@mind.be>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This makes things easier to understand and more consistent with the pkg-infra.
For example, it removes the need for '$$@' in the CMD variables of fs/*/*.mk.
It also makes it possible to update the variables later, e.g. in the package
override file.
It also makes sure that the date will be recorded correctly in Yann E. Morin's
patch that logs the MESSAGE macros to a file.
The fs/*/*.mk must be updated as well because the '$@' shouldn't be quoted
anymore in the CMD variables or the hooks.
The $(eval ...) for the dependencies is redundant, because the $(ROOTFS_TARGET)
variable is already eval'd. Note that it is only redundant if the evaluation of
the uses of the variable is also delayed.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The generic fs handling does a chmod -R 0:0 $(TARGET_DIR), so there's no
need for a specific option to enforce this when making an ext2fs image.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It's pretty uncommon to use ext2fs on embedded systems, so don't enable
it by default.
Adjust defconfigs to match.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#2929
Instead of just adding a fixed amount to the blocks used, try to
estimate the real space needed according to the filesystem structure
(bitmaps, inodes, blocks).
The side effect of this is that we no longer significantly overestimate
the size needed for small file systems.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
With the ROOTFS_TARGET conversion, EXT2_OPTS gets evaluated very early
(before TARGET_DIR is populated with files), so the calculated
blocks/inodes numbers are wrong.
Fix it by moving the calculation to a shell script wrapper around
genext2fs, so it only gets executed just before genext2fs runs.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
BR2_TARGET_ROOTFS_EXT2_RESBLKS is an int, so test against 0 rather than
the empty string - Otherwise the test is always true and a -m option
without arguments is added to the argument list, causing genext2fs to
get confused.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The dependency on gzip, bzip2 and lzma are properly handled
automatically. No need to tell the user about this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
