Remove patch (already in version). This version bump only contains a
limited set of bug fixes:
Changes 1.1.3
* Fix: default location of FIPS 140-2 HMAC control file is .<orig file>.hmac
(was accidentally moved to <orig file>.hmac with 1.1.2)
Changes 1.1.2
* Fix: Bug fixes for GCC 8.1.0 regarding string length checks by
Krzysztof Kozlowski
* Enhancement: ensure that tests execute on architectures other than X86
by Ondrej Mosnáček
* Fix: Bug fix to initialize FDs at the correct time in kcapi-kernel-if.c
by Ondrej Mosnáček
* Test fix: Support test execution outside build environment by
Ondrej Mosnáček
Changes 1.1.1
* Fix: Bug fixes for kcapi_hasher by Ondrej Mosnáček
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[Peter: drop Makefile changes]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit b07116644d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It turns out that the configure script attempts to run autoheader
because the configure.ac timestamp is slightly later than that of
config.h.in. Update the config.h.in timestamp after tarball extract to
avoid autoheader run. With that we can drop the host-autoconf
dependency.
Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 1f3f1fb8c7.
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds support for the powerpc arch to conditionally
check if an arch provies altivec accelerator support, similar
to other SIMD on ARM/x86.
Upstream issue: aircrack-ng/aircrack-ng#1941
Fixes
http://autobuild.buildroot.net/results/87e82a5e8d0b1c1ff10ec3e59d25bcd56b329075
Tested against both a e6500 with Altivec and a e500 target.
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
On some architectures, atomic binutils are provided by the libatomic
library from gcc. Linking with libatomic is therefore necessary,
otherwise the build fails with:
sparc-buildroot-linux-uclibc/sysroot/lib/libatomic.so.1: error adding symbols: DSO missing from command line
This is often for example the case on sparcv8 32 bit.
This atomic dependency is due to Qt >= 5.8, pkconfig can't be used as
Qt5 pc files does not mention this dependency
Fixes:
- http://autobuild.buildroot.net/results/9e307ab9c7067b26d7b33a572204394808e25772
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[Peter: drop Makefile changes]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 4b8deaf34c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2018-12910: The get_cookies function in soup-cookie-jar.c in
libsoup 2.63.2 allows attackers to have unspecified impact via an empty
hostname.
Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/d6d/d6dc9a640aa1f6650a3e7b9397f2fe2ae3433f4d/http://autobuild.buildroot.net/results/ab5/ab5a58ea7845f9f378454ee1aa7e872448618ba9/
ebx was recently added to the x86 inline asm MULADDC_STOP clobber list to
fix#1550, but this causes the build to fail with GCC < 5 when building in
PIC mode with errors like:
include/mbedtls/bn_mul.h:46:13: error: PIC register clobbered by ‘ebx’ in ‘asm’
This is because older GCC versions treated the x86 ebx register (which is
used for the GOT) as a fixed reserved register when building as PIC.
This is fixed by an improved register allocator in GCC 5+. From the release
notes:
Register allocation improvements: Reuse of the PIC hard register, instead of
using a fixed register, was implemented on x86/x86-64 targets. This
improves generated PIC code performance as more hard registers can be used.
https://www.gnu.org/software/gcc/gcc-5/changes.html
As a workaround, add a patch to detect this situation and disable the inline
assembly, similar to the MULADDC_CANNOT_USE_R7 logic.
Patch submitted upstream: https://github.com/ARMmbed/mbedtls/pull/1986
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This fixes autobuild failures like
http://autobuild.buildroot.net/results/3288b742cee650ee47a41c5b4d6aaef1fe67bff1
php compile breaks with:
ext/mysqlnd/mysqlnd_auth.o: In function `php_mysqlnd_scramble_sha2':
mysqlnd_auth.c:(.text+0x1054): undefined reference to `PHP_SHA256Init'
mysqlnd_auth.c:(.text+0x1064): undefined reference to `PHP_SHA256Update'
mysqlnd_auth.c:(.text+0x1070): undefined reference to `PHP_SHA256Final'
mysqlnd_auth.c:(.text+0x1078): undefined reference to `PHP_SHA256Init'
mysqlnd_auth.c:(.text+0x1088): undefined reference to `PHP_SHA256Update'
mysqlnd_auth.c:(.text+0x1094): undefined reference to `PHP_SHA256Final'
mysqlnd_auth.c:(.text+0x109c): undefined reference to `PHP_SHA256Init'
mysqlnd_auth.c:(.text+0x10ac): undefined reference to `PHP_SHA256Update'
mysqlnd_auth.c:(.text+0x10bc): undefined reference to `PHP_SHA256Update'
mysqlnd_auth.c:(.text+0x10c8): undefined reference to `PHP_SHA256Final'
It looks like the php mysqli extension needs the hash extension to work. This
seems to be a php Make dependany bug. This patch works around it until the
upstream maintainers can fix it.
Signed-off-by: Christopher McCrory <chrismcc@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
dropbear is affected by an user enumeration vulnerability similar to the
recent issue in openssh (CVE-2018-15473). Add an upstream patch fixing the
issue.
For more details, see the discussion on the mailing list:
http://lists.ucc.gu.uwa.edu.au/pipermail/dropbear/2018q3/002110.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds a one-liner patch that fixes the build with musl of
the openpowerlink package, caused by a missing <sys/types.h>
include. The patch has been submitted upstream.
Fixes:
http://autobuild.buildroot.net/results/8aff5f6d7bcab616129368c1fb22026bb164e454/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
brltty has a very inventive buildsystem, where it internall runs
./configure for the build machine In doing so, it generates a list
of make variables to define what the build machine supports, like
it does for the target.
However, the build variables are generated with a convoluted sed
script that scans the target list, and appends _FOR_BUILD to each
target variables. Then, both lists are included from the Makefile,
on the assumption that the build variables will not clash with the
target variables.
Where it gets interesting, is that that sed script considers the
variables names to match '[A-Za-z][A-Za-z0-9_]*'
And there we see why ATSPI2_PACKAGE does not match: it contains a
digit.
So, some build variables will inevitably override target ones.
Fix that by simply expanding the matching regexp to allow digits
in variable names.
Fixes:
http://autobuild.buildroot.org/results/a37/a37782b3cfc1a96cc129db8fade20a36a7b2d470/http://autobuild.buildroot.org/results/97e/97edc6a47d2140968e84b409cdc960604e5896f2/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Mario Lang <mlang@blind.guru>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Extend i2c-tools SPDX identifiers to include the library license.
Also include COPYING.LGPL and README to license files.
The ic2-tools readme states:
LICENSE
Check the documentation of individual tools for licensing information.
The library is released under the LGPL version 2.1 or later, while most
tools are released under the GPL version 2 or later, but there are a few
exceptions.
Signed-off-by: Brad Love <brad@nextdimension.cc>
[Thomas: add hashes for COPYING.LGPL and README.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit adds a patch to RAUC that makes the eMMC boot partition
support optional. This allows RAUC to build successfully on systems
using Linux < 3.0.
Fixes:
http://autobuild.buildroot.net/results/7e1cbeb458cb6536a36eae0d24cefb36edb22f55/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Add kconfig help text that explains how to manually specify an
official Linux version to use for the kernel headers.
Signed-off-by: Mark Corbin <mark.corbin@embecosm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following security issues:
- CVE-2018-0497: Remote plaintext recovery on use of CBC based ciphersuites
through a timing side-channel
- CVE-2018-0498: Plaintext recovery on use of CBC based ciphersuites through
a cache based side-channel
For more info, see the advisory:
https://tls.mbed.org/tech-updates/security-advisories/mbedtls-security-advisory-2018-02
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes CVE-2018-15473: user enumeration vulnerability due to not delaying
bailout for an invalid authenticating user until after the packet
containing the request has been fully parsed.
Some OpenSSH developers don't consider this a security issue:
https://lists.mindrot.org/pipermail/openssh-unix-dev/2018-August/037138.html
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes [1]:
../3rdparty/double-conversion/include/double-conversion/utils.h:81:2: error: #error Target architecture was not detected as supported by Double-Conversion.
#error Target architecture was not detected as supported by Double-Conversion.
[1] http://autobuild.buildroot.net/results/489/4891d96f45c64c2e66fe819bd4175cc1d6243a93
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The check_musl function currently builds a program and verifies if the
program interpreter starts with /lib/ld-musl. While this works fine
for dynamically linked programs, this obviously doesn't work for a
purely static musl toolchain such as [1].
There is no easy way to identify a toolchain as using the musl C
library. For glibc, dynamic linking is always supported, so we look at
the dynamic linker name. For uClibc, there is a distinctive
uClibc_config.h header file. There is no such distinctive feature in
musl.
We end up resorting to looking for the string MUSL_LOCPATH, which is
used by musl locale_map.c source file. This string has been present in
musl since 2014. It certainly isn't a very stable or convincing
solution to identify the C library as being musl, but it's the best we
could find.
Note that we are sure there is a libc.a file, because the
check_unusable_toolchain function checks that there is a such a file.
[1] http://autobuild.buildroot.net/toolchains/tarballs/br-arm-musl-static-2018.05.tar.bz2
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We sometimes create dangling symlinks in the target directory. That is
because we need canonical targets, as relative targets don't work well
with BR2_ROOTFS_MERGED_USR. For example, the vim package installs the
/bin/vi symlink to /usr/bin/vim. This symlink might be dangling when the
build host has no vim installed there.
Patch the busybox install.sh script to avoid clobber of dangling
symlinks.
Fixes:
http://autobuild.buildroot.net/results/796/796107430db6545401d9926e84f19eaf2040b756/
Cc: Adam Duskett <aduskett@gmail.com>
Cc: Carlos Santos <casantos@datacom.com.br>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Depending on the configuration, the cpp output may contain the string 'yes'
in a comment if built under a path containing 'yes', confusing the _AIX
test:
${CROSS}-cpp conftest.h
\# 1 "conftest.h"
\# 1 "<built-in>"
\# 1 "<command-line>"
\# 31 "<command-line>"
\# 1 "/home/peko/source/buildroot/output-yes/host/x86_64-buildroot-linux-gnu/sysroot/usr/include/stdc-predef.h"
\# 32 "<command-line>" 2
\# 1 "conftest.txt"
If misdetected, the configure script adds -lc128 to LIBS, causing the
AC_CHECKS_FUNCS check for stat64 to fail, which in turn causes compilation
errors about redefinition of symbols:
In file included from ./src/include/pv-internal.h:9:0,
from src/pv/file.c:5:
./src/include/config.h:76:18: error: redefinition of 'struct stat'
# define stat64 stat
^
Fix it by only matching on 'yes' on a line by itself.
As pv doesn't cleanly autoreconf (it doesn't use automake and configure.in
is located in subdir), instead directly patch configure.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
systemd can use elfutils when available, so this commit adds the
detection of this library.
Signed-off-by: Keith Mok <ek9852@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
wget is the only downloader currently usable with BR2_PRIMARY_SITE, and that
doesn't work at all for file:// URLs. The symptoms are these:
support/download/dl-wrapper -c '2.4.47' -d '/PATH/build/sw/source/attr' -D '/PATH/build/sw/source' -f 'attr-2.4.47.src.tar.gz' -H 'package/attr//attr.hash' -n 'attr-2.4.47' -N 'attr' -o '/PATH/build/sw/source/attr/attr-2.4.47.src.tar.gz' -u file\|urlencode+file:///NFS/buildroot_dl_cache/attr -u file\|urlencode+file:///NFS/buildroot_dl_cache -u http+http://download.savannah.gnu.org/releases/attr -u http\|urlencode+http://sources.buildroot.net/attr -u http\|urlencode+http://sources.buildroot.net --
file:///NFS/buildroot_dl_cache/attr/attr-2.4.47.src.tar.gz: Unsupported scheme `file'.
ERROR: attr-2.4.47.src.tar.gz has wrong sha256 hash:
ERROR: expected: 25772f653ac5b2e3ceeb89df50e4688891e21f723c460636548971652af0a859
ERROR: got : e3b0c44298fc1c149afbf4c8996fb92427ae41e4649b934ca495991b7852b855
ERROR: Incomplete download, or man-in-the-middle (MITM) attack
In the case of custom Linux kernel versions, this is fatal, because there isn't
necessarily a hash file to indicate that wget's empty tarball is wrong.
This seems to have been broken by commit c8ef0c03b0, because:
1. BR2_PRIMARY_SITE always appends "urlencode" (package/pkg-download.mk)
2. Anything with the "|urlencode" suffix in $uri will end up using wget due to
the backend case wildcarding.
3. The wget backend rejects file:/// URLs ("unsupported scheme"), and we end up
with an empty .tar.gz file in the downloads directory.
Fix that by shell-extracting the backend name from the left of "|". I'm not
positive if all URLs will have a "|", so this code only looks for a "|" left of
the "+".
Signed-off-by: Hollis Blanchard <hollis_blanchard@mentor.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The current download location fails, and Buildroot falls back to
sources.b.o:
--2018-08-20 23:41:39-- https://red.libssh.org/attachments/download/218/libssh-0.7.5.tar.xz
Resolving red.libssh.org (red.libssh.org)... 78.46.80.163
Connecting to red.libssh.org (red.libssh.org)|78.46.80.163|:443... connected.
The certificate's owner does not match hostname ‘red.libssh.org’
--2018-08-20 23:41:39-- http://sources.buildroot.net/libssh/libssh-0.7.5.tar.xz
Resolving sources.buildroot.net (sources.buildroot.net)... 104.25.211.19, 104.25.210.19, 2400:cb00:2048:1::6819:d313, ...
Connecting to sources.buildroot.net (sources.buildroot.net)|104.25.211.19|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 351632 (343K) [application/x-xz]
This commit fixes the download location:
--2018-08-20 23:43:04-- https://www.libssh.org/files/0.7/libssh-0.7.5.tar.xz
Resolving www.libssh.org (www.libssh.org)... 87.98.168.187, 2001:41d0:2:f80c::4
Connecting to www.libssh.org (www.libssh.org)|87.98.168.187|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 351632 (343K) [application/x-tar]
This patch is extracted from a contribution from Bernd Kuhls who was
also bumping the package at the same time
(http://patchwork.ozlabs.org/patch/959192/).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When libidn2 is statically build with libunistring support, mutt needs
to add -lunistring to LIBS.
To do that, add a call to PKG_CHECK_MODULES to retrieve this information
from libidn2.pc
Fixes:
- http://autobuild.buildroot.net/results/177da8f4798f69298db5385957184f1c53cca923
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The download wrapper call is currently always being displayed, even
without V=1, which is a bit annoying. It shows something like this:
thomas@windsurf:~/projets/buildroot (master)$ make tslib-source
>>> tslib 1.16 Downloading
PATH="/home/thomas/projets/buildroot/output/host/bin:/home/thomas/projets/buildroot/output/host/sbin:/usr/local/bin:/usr/bin:/bin:/home/thomas/.rvm/bin:/usr/local/sbin:/usr/sbin:/home/thomas/.rvm/bin:/home/thomas/sys/bin:/home/thomas/.gem/ruby/2.1.0/bin:/home/thomas/.rvm/bin" BR2_DL_DIR=/home/thomas/dl BUILD_DIR=/home/thomas/projets/buildroot/output/build O=/home/thomas/projets/buildroot/output flock /home/thomas/dl/tslib/ support/download/dl-wrapper -c '1.16' -d '/home/thomas/dl/tslib' -D '/home/thomas/dl' -f 'tslib-1.16.tar.xz' -H 'package/tslib//tslib.hash' -n 'tslib-1.16' -N 'tslib' -o '/home/thomas/dl/tslib/tslib-1.16.tar.xz' -u https+https://github.com/kergoth/tslib/releases/download/1.16 -u http\|urlencode+http://sources.buildroot.net/tslib -u http\|urlencode+http://sources.buildroot.net --
Let's silence this dl-wrapper call by prepending with $(Q).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
MySQL detects on the build machine where the hostname program is
located, and uses this value in a number of configuration files and
scripts that are generated and installed in the target:
output/target$ grep -r "bin/hostname" *
etc/inittab:::sysinit:/bin/hostname -F /etc/hostname
usr/share/mysql/mysql.server: pid_file=$datadir/mysqlmanager-`/usr/bin/hostname`.pid
usr/share/mysql/mysql.server: server_pid_file=$datadir/`/usr/bin/hostname`.pid
usr/bin/mysql_install_db:hostname=`/usr/bin/hostname`
usr/bin/mysqld_safe: err_log=$DATADIR/`/usr/bin/hostname`.err
usr/bin/mysqld_safe: pid_file="$DATADIR/`/usr/bin/hostname`.pid"
However, the hostname on the build machine may not necessarily be at
the same location as the hostname program on the target. Buildroot has
its hostname program (coming from Busybox) in /bin, but some Linux
distributions (such as Fedora) use /usr/bin/hostname, causing the
incorrect hostname paths above.
This commit fixes that by passing the appropriate autoconf cache
variable value.
Signed-off-by: Christopher McCrory <chrismcc@gmail.com>
[Thomas: add commit log]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Version 0.8.6 is a bugfix release including a nasty bug that has
potential to crash applications when parsing certain URIs (like
"//:%aa@", excluding quotes).
For more details please check the change log at
https://github.com/uriparser/uriparser/blob/uriparser-0.8.6/ChangeLog
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
