Users should use BR2_TARGET_UBOOT_PATCH instead.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The existing u-boot patch option only allowed directories to be
specified. This adds support for URLs using similar code as found
in linux/linux.mk. Local files are also handled now.
This change is useful for Intel Edison support, so that Intel's u-boot
patch can be downloaded rather than stored in the Buildroot source tree.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: fix issues noticed by Arnout:
- Rewrap the linux/Config.in paragraph
- Revert the "is a toolchain dependency" -> "has a toolchain
dependency" change from pkg-generic.mk, as the original was
correct.]
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For some (silly?) reason, the kconfig-package infra always wants
<pkg>_KCONFIG_FILE to be defined. So let's do like barebox does: use a
temporary AT91BOOTSTRAP3_SOURCE_CONFIG variable, and assign it to
AT91BOOTSTRAP3_KCONFIG_FILE. This way, the latter is always defined,
even if to the empty value.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In at91bootstrap3, defconfig files are spread out in various
sub-directories, so we can't easily construct the path to those
defconfig files.
As it turns out, there are no two defconfig files named the same; they
all contain at least the board name, plus some extra info. And there is
always only one directory depth below board/ where all defconfig files
are to be found.
Also, at91bootstrap3's own Makefile relies on this single-match as it
runs a 'find' command to locate the defconfig file.
So, even though we do not know the path to the defconfig file, we can
construct a shell-glob quite easily (in the hope that there will never
be more than one directory depth).
Signed-off-by: Mauro Condarelli <mc5686@mclink.it>
[yann.morin.1998@free.fr:
- remove custom _CONFIGURE_CMDS, handled by pkg-kconfig (Thomas)
- remove redundant intermediate variable
- fix using internal defconfig files
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Several packages have some logic to apply custom patches that existed
before the BR2_GLOBAL_PATCH_DIR mechanism: at91bootstrap,
at91bootstrap3, barebox, uboot and linux. Currently, the logic of
those packages to apply custom patches is to match
<package-name>-*.patch, which is not consistent with what we've done
for patches stored in the package directory, and for patches stored in
BR2_GLOBAL_PATCH_DIR: in such cases, we simply apply *.patch.
Therefore, for consistency reasons, this commit changes these packages
to also apply *.patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Allow to generate u-boot.sd, Freescale i.MX28 SB format with a header for
booting from an SD card.
U-boot includes an mxsboot tool to generate this format, starting from
v2011.12.
See u-boot doc/README.mxs (or doc/README.mx28_common before 2013.07).
[Arnout:
- Wrap Config.in help text at 72 columns.
- Remove v from U-Boot version specifier.
- Refer to different README name before 2013.07.
- Depend on host-elftosb
- Add comment to clarify sb -> sd conversion.]
Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com>
Tested-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Drop the buildroot toolchain non-largefile support option since it's
being removed.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit doesn't touch infra packages.
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since 6.03 syslinux release, the gnu-efi sources are bundled whith
syslinux. We need to force the build system to use the Buildroot's
gnu-efi package.
Remove the patch for find-gnu-efi.sh script which was removed, as well
as the SYSROOT variable from the BUILD_CMDS, which is no longer
needed.
There are still some parallel build issues, so MAKE1 can't
be removed for now.
Add a hash file.
Fix indentation.
[Thomas: fix minor typos in a new comment in the .mk file.]
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Barebox uses KERNEL_ARCH to derive BAREBOX_ARCH, but doesn't
currently handle the case of the x86-64 architecture. In this
case KERNEL_ARCH is x86_64, but BAREBOX_ARCH should be x86
nonetheless.
Signed-off-by: Fabien Lahoudere <fabienlahoudere.pro@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- use $(BAREBOX_DIR) instead of $(@D) when defining
BAREBOX_SOURCE_CONFIG, because $(@D) has no value at this point
since we're outside of a make rule. This was causing Barebox to be
constantly rebuilt, since the defconfig path was not a full path,
it was looking like: '/arch/arm/configs/tegra_v7_defconfig'. The
solution of using $(BAREBOX_DIR) has been used to mimic was is done
in the linux package, which uses $(LINUX_DIR).]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: "Yann E. Morin" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Even though this is not strictly necessary with the current version
of barebox.mk, it becomes necessary when migrating barebox.mk to the
kconfig infrastructure.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: "Yann E. Morin" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When x86-64-efi platform is selected, grub2 automatically adds -m64 to the
CFLAGS. This makes the configure script failed when the toolchain does not
have multilib support (like the Buildroot ones).
Reported-by: Noe Rubinstein <nrubinstein@aldebaran-robotics.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Though U-Boot introduced a Kconfig and Kbuild build system with version
2014.10 the old build commands with <board>_config are still supported.
Tested with BR2_TARGET_UBOOT_BOARDNAME="m28evk"
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This flag seems to be obsolete. There is no piece of code in the U-Boot source
tree referencing CONFIG_NOSOFTFLOAT.
Unfortunatly the use of this flag is not documented here. Maybe it's about this
old workaround:
http://lists.denx.de/pipermail/u-boot/2007-March/020282.html
However, this patch has been declined:
http://www.denx.de/wiki/view/U-Boot/PatchStatus?rev=1.27
Since no other configure options are used, remove also UBOOT_CONFIGURE_OPTS.
Signed-off-by: Jörg Krause <jkrause@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove the quotes from the BR2_TARGET_UBOOT_SPL_NAME variable.
Signed-off-by: Jörg Krause <jkrause@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Point out that the SPL name is an image name.
Signed-off-by: Jörg Krause <jkrause@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Building an SPL image depends on the board configuration. This option
does not enable the SPL build, but only copies the built SPL image to
the binary images folder. The current help text is misleading.
Signed-off-by: Jörg Krause <jkrause@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Change to use the _defconfig targets of at91bootstrap3 build system
when a defconfig is used.
[Thomas: adjust to make a better use of at91bootstrap3 defconfig
mechanism.]
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This way we don't depend on the permissions of files under boot/grub/,
which aren't tracked.
While we're at it, change all 'cp' usages into 'install' with the
correct mode for each file.
Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add and use the "UNZIP" variable instead of calling directly unzip
because the variable contains the "-q" option to silence "unzip" so it
doesn't show the list of files extracted just like when tar files are
being unpacked.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To easy up adding optional parameters when calling the
"apply-patches.sh" add and use the "APPLY_PATCHES" variable to execute
the script.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is the location where buildroot install the image if requested,
so this should be the default search path for the bootloader.
Signed-off-by: Alvaro G. M <alvaro.gamez@hazent.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Buildroot coding style defines one space around make assignments and
does not align the assignment symbols.
This patch does a bulk fix of offending packages. The package
infrastructures (or more in general assignments to calculated variable
names, like $(2)_FOO) are not touched.
Alignment of line continuation characters (\) is kept as-is.
The sed command used to do this replacement is:
find * -name "*.mk" | xargs sed -i \
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*$#\1 \2#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*\([^\\]\+\)$#\1 \2 \3#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*\([^\\ \t]\+\s*\\\)\s*$#\1 \2 \3#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\(\s*\\\)#\1 \2\3#'
Brief explanation of this command:
^\([A-Z0-9a-z_]\+\) a regular variable at the beginning of the line
\([?:+]\?=\) any assignment character =, :=, ?=, +=
\([^\\]\+\) any string not containing a line continuation
\([^\\ \t]\+\s*\\\) string, optional whitespace, followed by a
line continuation character
\(\s*\\\) optional whitespace, followed by a line
continuation character
Hence, the first subexpression handles empty assignments, the second
handles regular assignments, the third handles regular assignments with
line continuation, and the fourth empty assignments with line
continuation.
This expression was tested on following test text: (initial tab not
included)
FOO = spaces before
FOO = spaces before and after
FOO = tab before
FOO = tab and spaces before
FOO = tab after
FOO = tab and spaces after
FOO = spaces and tab after
FOO = \
FOO = bar \
FOO = bar space \
FOO = \
GENIMAGE_DEPENDENCIES = host-pkgconf libconfuse
FOO += spaces before
FOO ?= spaces before and after
FOO :=
FOO =
FOO =
FOO =
FOO =
$(MAKE1) CROSS_COMPILE=$(TARGET_CROSS) -C
AT91BOOTSTRAP3_DEFCONFIG = \
AXEL_DISABLE_I18N=--i18n=0
After this bulk change, following manual fixups were done:
- fix line continuation alignment in cegui06 and spice (the sed
expression leaves the number of whitespace between the value and line
continuation character intact, but the whitespace before that could have
changed, causing misalignment.
- qt5base was reverted, as this package uses extensive alignment which
actually makes the code more readable.
Finally, the end result was manually reviewed.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Cc: Yann E. Morin <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To be consistent with the recent change of FOO_MAKE_OPT into FOO_MAKE_OPTS,
make the same change for FOO_CONF_OPT.
Sed command used:
find * -type f | xargs sed -i 's#_CONF_OPT\>#&S#g'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To be consistent with the recent change of FOO_MAKE_OPT into FOO_MAKE_OPTS,
make the same change for FOO_INSTALL_TARGET_OPT.
Sed command used:
find * -type f | xargs sed -i 's#_INSTALL_TARGET_OPT\>#&S#g'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
While the autotools infrastructure was using FOO_MAKE_OPT, generic packages
were typically using FOO_MAKE_OPTS. This inconsistency becomes a problem
when a new infrastructure is introduced that wants to make use of
FOO_MAKE_OPT(S), and can live alongside either generic-package or
autotools-package. The new infrastructure will have to choose between either
OPT or OPTS, and thus rule out transparent usage by respectively generic
packages or generic packages. An example of such an infrastructure is
kconfig-package, which provides kconfig-related make targets.
The OPTS variant is more logical, as there are typically multiple options.
This patch renames all occurrences of FOO_MAKE_OPT in FOO_MAKE_OPTS.
Sed command used:
find * -type f | xargs sed -i 's#_MAKE_OPT\>#&S#g'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the trailing slash is stripped from $($(PKG)_SITE) by pkg-generic.mk:
$(call DOWNLOAD,$($(PKG)_SITE:/=)/$($(PKG)_SOURCE))
so it is redundant.
This patch removes it from $(PKG)_SITE variable for BR consistency.
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The help text of grub2 explains the detailed steps to create a disk
image with grub2 installed on it. However, the steps for the
BIOS-based systems have a few minor issues fixed by this patch:
- When calling partx to get the partitions detected, we should do it
on the /dev/loop0 block device, and not on the underlying disk.img
image file.
- The grub-bios-setup utility must be called as root to work properly
on /dev/loop0.
- The steps to cleanup the partx and loop device were missing.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since boot partition was not specified, grub tools try to detect it
automatically. This patch add an option to force it.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
