Those patches have been submitted upstream.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Set busybox .config CONFIG_NOMMU appropiately and streamline this new
setting with the previous BUSYBOX_DISABLE_MMU_APPLETS in a single
BUSYBOX_SET_MMU definition (since it's not just applets now).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's also done in the kernel configuration, however users may be using
some other pre-built kernel and miss functionality like firmware
loading.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The kernel headers are part of the staging directory, so there is no
reason to point the Busybox CFLAGS directly to them.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When udhcpc is used on multiple network devices at the same time (or a mix
of dhcp and fixed configuration), /etc/resolv.conf should contain the
union of information from all the interfaces.
Currently that's not the case. The udhcpc script simply overwrites
resolv.conf with the information from the specific interface on each dhcp
bound/renew event.
Fix it by tagging lines with the interface they came from when added,
and drop the affected lines on deconfig/renew. As /etc/resolv.conf is
often a symlink to /tmp (and rootfs might be read only), special care
has to be taken when it is updated.
Notice that I'm not really aware of any official documentation requiring
that '#' comments in /etc/resolv.conf must be supported, but atleast
glibc and uClibc do.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
ifconfig up is a no-op if the device is already running, so let's just
do that unconditionally.
Systems might have multiple network devices, and perhaps run udhcpc on
another interface even when booted over nfs, so don't disable the
per-interface deconfig based on the global nfsroot= setting on the kernel
command line.
If you don't want udhcpc to mess with kernel level IP autoconfiguration
(E.G. for nfs boot), you should instead ensure udhcpc/ifup/ifplugd isn't
started for that interface.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We're currently using two different udhcpc scripts, one in the busybox
package and another in the avahi one, which calls avahi-autoipd on
dhcp failures.
The avahi one actually only does something differently from the default
if avahi-autoipd is available, so let's just always use this one instead
of the complicated logic about writing the file if not present /
overwriting it afterwards.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Update the mdev patch so that subsystem matching is reintroduced.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
On commit 5538e47662 the versioned package
patches changed the directory structure but the packages weren't fixed.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Don't change the busybox STATIC option if buildroots PREFER_STATIC_LIB option
is not set. Not to prefer static linking doesn't imply prefer dynamic linking
for all packages.
Signed-off-by: Patrick Ziegler <patrick.ziegler@fh-kl.de>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The BusyBox watchdog application supports reset periods specified in
milliseconds. The Buildroot package will only allow an integer reset period,
which prevents the use of the required "ms" suffix. Change the watchdog period
configuration item to a string, to allow the use of the "ms" suffix.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Before the config file can be copied, it has to exist. The
other xxx-update-config targets do this as well.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Busybox does partial linking of its modules before linking everything
together into the binary. Those partial links are done without the
standard libraries, but that also means -ltirpc can't be found. In
addition, this probably fails horribly with static linking (untested).
The problem is that the LDFLAGS are also used in the partial links.
So instead, use CFLAGS_busybox, which is only used for the busybox
link step. Also make sure that this is passed through the environment,
not on the command line, so the busybox Makefile can still append to
it.
Fixes e.g.
http://autobuild.buildroot.net/results/e8351e3ba86fdcdb2999548658271a6fde0526a9
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of making the Busybox configuration more complicated by trying
to adjust it depending on whether RPC is available or not (which gets
complicated when RPC support can be provided by libtirpc), simplify
things by letting the user enable FEATURE_NFS_MOUNT or not depending
on whether RPC support is available or not.
Our default configuration do not enable FEATURE_NFS_MOUNT, so users
will not face any build problems by default. Only if they explicitly
enable FEATURE_NFS_MOUNT will they have to make sure that the
toolchain has RPC support, or that libtirpc is enabled (support for
this added in a followup patch).
[Peter: remove from CONFIGURE_CMDS as well]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since we have now two uncompatible init systems, and we want only one of
them at the same time in use in the rootfs, we need to select a
particular init system. This patch also adds $(PKG)_INSTALL_INIT_SYSTEMD
and $(PKG)_INSTALL_INIT_SYSV hooks that are called when the matching
init systems are selected to install properly the init scripts of the
package.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add version 1.20.0, remove deprecated 1.16.x & 1.17.x versions and mark
1.18.x as deprecated.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Busybox used to declare and create files even if the package was not
enabled through the device table. Remove the entries for busybox in the
device table and move them to the package declaration.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Our default mdev.conf file in package/busybox has lines like:
pcm.* root:audio 660 =snd/
event[0-9]+ root:root 640 =input/
that are used to create the device is the appropriate /dev
subdirectory. However, this feature requires
CONFIG_FEATURE_MDEV_RENAME to be enabled, otherwise mdev complains
with:
mdev: bad line 25
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The original name busybox-update is confusing as it only updates a
configuration file.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
