For some reason the kernel.org download hash doesn't match the
sourceforge hash so switch to kernel.org for the download.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop --disable-tls since it's not needed.
Add --disable-rpath to avoid unnecessary pollution.
e4defrag now needs an (e)glibc or musl toolchain because of
sync_file_range()
See e2fsprogs commit 58229aaf85d435469e901c974f31ead6d9124166
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(external) nios2 toolchain is currently missing the fallocate64 system
call. Because of compiling the e2fsprogs package with _FILE_OFFSET_BITS=64,
_LARGEFILE_SOURCE and _LARGEFILE64_SOURCE the fallocate call is replaced
by fallocate64 by the glibc. Therefore fallocate is entirely disabled while
configuring the package.
Fixes http://autobuild.buildroot.org/results/70a/70a47bd7392560cbc1c64769c8357c0b4c91ca3b/
Signed-off-by: Frank Bergmann <frank@frajasalo.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
e4defrag has to be disabled because of the (external) toolchain declares
the fallocate64 call in the header files but don't implement it in the
library. e4defrag defines its own fallocate64 function that throws an
error because of the previous declaration in the toolchain header.
Signed-off-by: Frank Bergmann <frank@frajasalo.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The libblkid library in util-linux uses fork. While it seems
potentially possible to disable the parts of the library that use fork
(the only parts using fork are parts related to LVM and Device Mapper,
which are said to be legacy as they are replaced by sysfs based
scanning, instead of having to fork to run a separate process).
However, since libblkid is used by:
- e2fsprogs, which uses lots of fork all over the place
- udev, which most likely will also need fork
There is not much point in making libblkid fork-less. As a
consequence, this commit makes util-linux/libblkid unavailable on
non-MMU architectures, and propagates the relevant dependency to the
reverse dependencies of libblkid.
This fixes the e2fsprogs build failure seen on Blackfin. The failure
was due to a configure test of e2fsprogs which was trying to link a
small test program against libblkid, which failed because there was an
undefined reference to fork() in the libblkid code.
Fixes:
http://autobuild.buildroot.net/results/ee2c1568d16ac040011dd4d6d8b543ff9e9e2622/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit c3d690166c.
The real cause of problem is missing posix_fadvise() implementation in uClibc
for xtensa. This has now been fixed with the uclibc version bump. The internal
e2fsprogs posix_fadvise() implementation is broken on 32bit systems anyway, and
upstream has removed it.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In the Config.in file of package foo, it often happens that there are other
symbols besides BR2_PACKAGE_FOO. Typically, these symbols only make sense
when foo itself is enabled. There are two ways to express this: with
depends on BR2_PACKAGE_FOO
in each extra symbol, or with
if BR2_PACKAGE_FOO
...
endif
around the entire set of extra symbols.
The if/endif approach avoids the repetition of 'depends on' statements on
multiple symbols, so this is clearly preferred. But even when there is only
one extra symbol, if/endif is a more logical choice:
- it is future-proof for when extra symbols are added
- it allows to have just one strategy instead of two (less confusion)
This patch modifies the Config.in files accordingly.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The fallocate syscall is not available on avr32. This is needed by the e4defrag
utility, so we disable this on avr32.
Fixes build failures such as the following.
http://autobuild.buildroot.net/results/dcb/dcb4e5c6981a9299a2eb18e325d4de621846afdb/
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch fixes the following whitespace problems in Config.in files:
- trailing whitespace
- spaces instead of tabs for indentation
- help text not indented with tab + 2 spaces
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch lines up the comments in Config.in files that clarify which
toolchain options the package depends on.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use the host-e2fsprogs to tune2fs the generated rootfs.ext2 image,
and upgrade it to either one of ext2, ext3 or ext4.
Since calling tune2fs may require running e2fsck (tune2fs will warn
to do so when certain FS options are changed), we systematically call
e2fsck. This makes the code path simpler, and as a side-effect checks
that genext2fs did not generate garbage.
In turn, e2fsck will unconditionally add a UUID to the filesystem,
which is bad for reproducibility, so we call tune2fs again to remove
the UUID. This does not require checking the filesystem.
To ensure compatibility of Buildroot's .config, leave ext2 as the
default. Boards' .config can override this at will.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add the e2fsprogs as a host-package selection in the menuconfig.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
remove e2fsprogs-add-missing-dep-of-tst_uuid-o.patch as
the changes are already upstream
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The e2fsprogs configure script enables the build of the e4defrag
utility by default. Disable it unless BR2_PACKAGE_E2FSPROGS_E4DEFRAG
is selected.
Also the --disable-blkid option is not recognized by the configure
script. Use --disable-libblkid instead.
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Thanks to the pkgparentdir and pkgname functions, we can rewrite the
AUTOTARGETS macro in a way that avoids the need for each package to
repeat its name and the directory in which it is present.
[Peter: pkgdir->pkgparentdir]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
e2fsprogs uuidd no longer builds with libuuid from util-linux 2.20,
and according to tytso the util-linux version should be used instead
when using libuuid from there, so drop the e2fsprogs option.
Reported-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Drop the dependency as it isn't really nice that other packages need
to select it, and kconf complains about it:
warning: (BR2_PACKAGE_E2FSPROGS && BR2_PACKAGE_USBMOUNT) selects
BR2_PACKAGE_BUSYBOX_SHOW_OTHERS which has unmet direct dependencies
(!BR2_PACKAGE_BUSYBOX)
Instead ensure that only the libraries are built by default, so
busybox applets are still used unless explicitly configured.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
e2fsprogs and util-linux both provide blkid / libblkid causing conflicts
if both are enabled. The preferred upstream (E.G. what is used by Debian)
is util-linux, so remove the options from e2fsprogs and make it use the
util-linux version instead.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
