gcc-12 is starting to trickle down to some distros, like Archlinux.
gcc-12 has new warnings, and detects more cases of issues, like new
UAF cases, which is causing build issues in code that was previously
building fine, as reported in #14826:
In file included from sigchain.c:3:
In function 'xrealloc',
inlined from 'sigchain_push.isra' at sigchain.c:26:2:
subcmd-util.h:56:23: error: pointer may be used after 'realloc' [-Werror=use-after-free]
56 | ret = realloc(ptr, size);
| ^~~~~~~~~~~~~~~~~~
subcmd-util.h:52:21: note: call to 'realloc' here
52 | void *ret = realloc(ptr, size);
| ^~~~~~~~~~~~~~~~~~
subcmd-util.h:58:31: error: pointer may be used after 'realloc' [-Werror=use-after-free]
58 | ret = realloc(ptr, 1);
| ^~~~~~~~~~~~~~~
subcmd-util.h:52:21: note: call to 'realloc' here
52 | void *ret = realloc(ptr, size);
| ^~~~~~~~~~~~~~~~~~
In that case, the kernel has already fixed their code, which is part of
5.17:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=52a9dab6d892763b2a8334a568bd4e2c1a6fde66
However, we can't easily carry that patch, because we don't know
whether the kernel the user uses already has the fix or not.
Instead, we can just tell the kernel to disable use of -Werror when
building host tools.
As a consequence, we can drop it from the perf-specific setting.
Fixes: #14826
Reported-by: Anders Pitman <buildroot@apitman.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The default defconfig target for the 64 bit powerpc kernel is
ppc64_defconfig, the big endian configuration.
When building for powerpc64le users want the little endian kernel as
they can't boot LE userspace on a BE kernel.
Fix up the defconfig used in this case. This will avoid the following
autobuilder failure:
VDSO32A arch/powerpc/kernel/vdso32/sigtramp.o
cc1: error: ‘-m32’ not supported in this configuratioin
make[4]: *** [arch/powerpc/kernel/vdso32/Makefile:49: arch/powerpc/kernel/vdso32/sigtramp.o] Error 1
http://autobuild.buildroot.net/results/dd76d53bab56470c0b83e296872d7bb90f9e8296/
Note that the failure indicates the toolchain is configured to disable
the 32 bit target, causing the kernel to fail when building the 32 bit
VDSO. This is only a problem on the BE kernel as the LE kernel disables
CONFIG_COMPAT, aka 32 bit userspace support, by default.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
5.15.x is getting quite old, so default to 5.17.x instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The 5.16.x series is now EOL upstream, so drop the linux-headers option and
add legacy handling for it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since SDMA firmwares for imx[6,7,8] are now provided only by
firmware-imx package and not linux-firmware package [1]. If
CONFIG_EXTRA_FIRMWARE is set in the kernel config, the build will fail
if the imx firmware is not available.
[1] http://lists.busybox.net/pipermail/buildroot/2021-January/603807.html
Signed-off-by: Leger Charlie <c.leger@borea-dental.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The 4.4.x series is now EOL upstream, so drop the linux-headers option and
add legacy handling for it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Just like aarch64, aarch64 BE supports the Image and Image.gz format.
Signed-off-by: Rémi Duraffort <remi.duraffort@linaro.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Some older versions of linux, or custom versions (like forks for some
boards), fail to build with host-gcc 10+, because of redefined symbols:
HOSTLD scripts/dtc/dtc
/usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x10): multiple definition
of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
collect2: error: ld returned 1 exit status
Since this has been fixed in recent-ish versions, we can't use an
unconditionaly patch, so we must have a conditional patch. However, a
patch may not always apply to arbitrary Linux versions or forks.
Upstream just dropped that line altogether:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e33a814e772cdc36436c8c188d8c42d019fda639
So, we use a little sed-grep combo to do the exact same change.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
To support building in the wireless regulatory database files (regulatory.db*)
into the kernel using the CONFIG_EXTRA_FIRMWARE option, we need to ensure that
the database files are installed before the Linux kernel is built.
The dependency is harmless if CONFIG_EXTRA_FIRMWARE isn't actually set.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Buildroot uses variable LINUX_ARCH_PATH to refer to the arch-specific
directory in the Linux tree, which may not necessarily be arch/$(KERNEL_ARCH).
Buildroot already accounts for the case of KERNEL_ARCH=i386 and
KERNEL_ARCH=x86_64, but does not for KERNEL_ARCH=sparc64, in which case the
correct directory is arch/sparc.
Reported-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This clarifies that custom DTSI files can be passed too,
and that the files are compiled after being copied to the
Linux kernel source tree.
Signed-off-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
CONFIG_DEBUG_BTF_INFO relies on pahole, so kernel DWARF are converted to BTF.
If CONFIG_DEBUG_BTF_INFO is set and BR2_LINUX_KERNEL_NEEDS_HOST_PAHOLE not,
an error message is shown and .config is not written.
Signed-off-by: Francis Laniel <flaniel@linux.microsoft.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The 5.14.x series is now EOL, so drop it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[yann.morin.1998@free.fr: actualyl drop it from the choice list]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch bumps Linux CIP RT kernel to version 5.10.83-cip1-rt1.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch bumps Linux CIP to version 5.10.83-cip1.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
"Path to to out-of-tree..." -> "Path to the out-of-tree..."
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The 5.13.x series is now EOL, so drop it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch bumps Linux CIP RT to version 4.19.198-cip54-rt21
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch bumps Linux CIP to version 4.19.198-cip54.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Includes fixes for the recent "Sequoia" seq_file vulnerability
(CVE-2021-33909):
https://lwn.net/Articles/863729/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As Thomas put it:
The <pkg>_HELP_CMDS variable allows packages using the
kconfig-package infrastructure to display their specific
targets related to the handling of their configuration.
However, it was not consistently used and handled by the
different packages.
So, this commit switches all the kconfig-based package to use the
generic help helper.
As a consequence:
- all kconfig packages now advetise their kconfig-related actions,
where some were previously missing: at91bootstrap3, linux-backports,
swupdate, xvisor;
- busybox advertises it does not support defconfig files;
- the 'foo-savedfconfig' action is no longer advertised: it is to be
considered an internal implementation detail.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
To support building in (a subset of) the linux-firmware files into the
kernel using the CONFIG_EXTRA_FIRMWARE option, we need to ensure that the
firmware files are installed before the Linux kernel is built, similar to
how it is done for intel-microcode.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
arm64 / riscv supports building a gzip compressed 'Image' format kernel,
which is sometimes useful. From arch/arm64/Makefile:
all: Image.gz
Image: vmlinux
$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
Image.%: Image
$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
(and similar logic for riscv)
Future architectures may or may not copy this logic, so for robustness add
an explicit Image.gz format rather than copying both Image and Image.gz when
the Image format is used.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As we discussed on the mailing list, using $(<pkg>_NAME) when defining
CPE ID variables feels a bit odd and needlessly complicated. Just use
the package name directly.
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop 5.9 stable (EOL).
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
[Peter: add Config.in.legacy handling for 5.9]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The CPE type of the Linux kernel is special, it should be "o", unlike
all other packages that use "a". We therefore need to override
<pkg>_CPE_ID_PREFIX, so that the CPE ID of the linux package matches
with the CPE dictionary.
Reported-by: Matt Weber <matthew.weber@rockwellcollins.com>
Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch adds CPE ID information for a significant number of
packages.
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch bumps Linux CIP RT to version 4.19.152-cip37-rt16
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps Linux CIP to version 4.19.152-cip37
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit b737c6b351. This was not
supposed to be committed, as the patch did not update linux.hash.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps Linux CIP to version 4.19.152-cip37
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Curently, host-kmod has no option to enable it, because only
the kernel depends on it, and this is unconditional (because
we can't know if modules will be enabled in the kernel config).
But we're soon to add options to enable various features of
kmod, so we'll need a place where to show those features.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Cc: Lucian Buga <lucianbuga@gmail.com>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add support for creating self-extractible kernels compressed with ZSTD.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
If the modules directory that corresponds to the version of the kernel
being built has been deleted, don't try to run depmod, which will
obviously fail.
This can happen for instance when the modules are stripped from the main
root filesystem, and placed into a separate filesystem image, so that
the root filesystem and the kernel can be updated separately.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
On Ubuntu 18.04, make-4.1 emits spurious, incorrect "entering/leaving"
messages, which end up in the LINUX_VERSION_PROBED variable:
printf 'probed linux version: "%s"\n' "$(LINUX_VERSION_PROBED)"
probed linux version: "make[1]: Entering directory '/home/buildroot'
4.19.78-linux4sam-6.2
make[1]: Leaving directory '/home/buildroot/output/build/linux-linux4sam_6.2'"
First, the messages are displayed even though we do explicitly pass
--no-print-directory -s.
Second, the entering and leaving messages are not about the same
directory!
This *only* occurs in the following conditions:
- the user has the correct 0022 umask,
- top-level parallel is used (with or without PPD),
- initial -C is specified as well.
$ umask 0022
$ make -j16 -C $(pwd)
[...]
depmod: ERROR: Bad version passed make[1]:
[...]
(yes, 'make[1]:' is the string depmod is trying, and fails, to parse as
a version string).
If any of the three conditions above is removed, the problem no longer
occurs. Here's a table of the MAKEFLAGS:
| 0002 | 0022 |
----+-------+------------------------------------------------+--------------------------+
| no-j | --no-print-directory -- | |
noC | +------------------------------------------------+--------------------------+
| -j16 | -j --jobserver-fds=3,4 --no-print-directory -- | -j --jobserver-fds=3,4 |
----+-------+------------------------------------------------+--------------------------+
| no-j | --no-print-directory -- | w |
-C | +------------------------------------------------+--------------------------+
| -j16 | -j --jobserver-fds=3,4 --no-print-directory -- | w -j --jobserver-fds=3,4 |
----+-------+------------------------------------------------+--------------------------+
0002: umask == 0002
0022: umask == 0022
no-j: no -j flag
-j16: -j16 flag
noC: no -C flag
-C : -C /path/of/buildroot/
Only the bottom-right-most case fails...
This behaviour goes against what is documented:
https://www.gnu.org/software/make/manual/make.html#g_t_002dw-Option
5.7.4 The ‘--print-directory’ Option
[...]
you do not need to specify this option because ‘make’ does it for
you: ‘-w’ is turned on automatically when you use the ‘-C’ option,
and in sub-makes. make will not automatically turn on ‘-w’ if you
also use ‘-s’, which says to be silent, or if you use
‘--no-print-directory’ to explicitly disable it.
So this exactly describes our situation; yet 'w' is added to MAKEFLAGS.
Getting rid of the 'w' flag makes the build succeed again, so that's
what we do here (bleark, icky)...
Furthermore, the documented way to override MAKEFLAGS is to do so as a
make parameter:
https://www.gnu.org/software/make/manual/make.html#Options_002fRecursion
5.7.3 Communicating Options to a Sub-make
[...]
If you do not want to pass the other flags down, you must change the
value of MAKEFLAGS, like this:
subsystem:
cd subdir && $(MAKE) MAKEFLAGS=
However, doing so does not fix the issue. So we resort to pass the
modified MAKEFLAGS via the environment (bleark, icky)...
Fixes: #13141
Reported-by: Laurent <laurent@neko-labs.eu>
Reported-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
