Userspace Raspberry Pi PWM/PCM/SPI library for SK6812 and WS281X LEDs.
Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Colorlog is a formatter for the python logging module.
Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
I am exclusively using my Gmail address for now on. Reflect this in
the DEVELOPERS file.
Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Mathieu is no longer working at Savoir-faire Linux, update his email
address in the DEVELOPERS file.
Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Keep listing the test infra so the developer is included in reviews, but
trim the list of tests to those the developer are most interested in.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
lrzip is a compression utility that excels at compressing
large files (usually > 10-50 MB)
Signed-off-by: Sam Lancia <sam@gpsm.co.uk>
[Thomas: license is GPL-2.0+, not GPL-2.0]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add basic support for the Libre Computer "La Frite" SBC.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since syslog-ng 3.11.1 eventlog has been bundled with the sources.
Remove the separate package.
We don't add Config.in.legacy handling because eventlog was only used
by syslog-ng, and was not really meant to be used by anyone else, so
there is no point in warning users who had this package enabled in
their configuration that it no longer exists, as it was only used by
syslog-ng, and syslog-ng now bundles eventlog.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
[Thomas: extend explanation about why we don't have any
Config.in.legacy handling]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Minimodem is a command-line program which decodes (or generates)
audio modem tones at any specified baud rate, using various
framing protocols. It acts a general-purpose software FSK modem,
and includes support for various standard FSK protocols such as
Bell103, Bell202, RTTY, TTY/TDD NOAA SAME, and Caller-ID.
Signed-off-by: Alexander Kurz <akurz@blala.de>
[Thomas:
- switch from a depends on to a select for the libsndfile or
pulseaudio or alsa dependency
- re-order statements in Config.in
- add missing host-pkgconf dependency]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
My email address will be deactivated in two weeks.
Signed-off-by: Refik Tuzakli <refik.tuzakli@savronik.com.tr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Gerome Burlats recently took care of the Qemu defconfigs, so it makes
sense to list him as a contact for the maintenance of these
defconfigs.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Gerome Burlats <gerome.burlats@smile.fr>
Cc: Romain Naour <romain.naour@smile.fr>
Acked-by: Gerome Burlats <gerome.burlats@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
<Pranit.Sirsat@imgtec.com>: host mxa-00376f01.gslb.pphosted.com[91.207.212.86]
said: 550 5.1.1 User Unknown (in reply to RCPT TO command)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Kevin Joly (kevin.joly@sensefly.com)<mailto:kevin.joly@sensefly.com>
Your message couldn't be delivered to the recipient because you don't have permission to send to it.
Looking at his LinkedIn profile, he left SenseFly in January 2019,
which quite certainly explains why his @sensefly.com e-mail address is
no longer working.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This defconfig tries to build an ARM Trusted Firmware version that
needs an ARM32 toolchain, which is not available as the platform is an
ARM64 one. The correct solution for this is to have a package in
Buildroot for an ARM32 bare-metal toolchain, but this wasn't done in
time for the 2019.08 release.
In order to not release 2019.08 with a broken defconfig, let's remove
it. It can be re-added later once the ARM32 bare-metal toolchain
problem has been resolved.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/278489410
Cc: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This defconfig tries to build an ARM Trusted Firmware version that
needs an ARM32 toolchain, which is not available as the platform is an
ARM64 one. The correct solution for this is to have a package in
Buildroot for an ARM32 bare-metal toolchain, but this wasn't done in
time for the 2019.08 release.
In order to not release 2019.08 with a broken defconfig, let's remove
it. It can be re-added later once the ARM32 bare-metal toolchain
problem has been resolved.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/278489367
Cc: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This defconfig tries to build an ARM Trusted Firmware version that
needs an ARM32 toolchain, which is not available as the platform is an
ARM64 one. The correct solution for this is to have a package in
Buildroot for an ARM32 bare-metal toolchain, but this wasn't done in
time for the 2019.08 release.
In order to not release 2019.08 with a broken defconfig, let's remove
it. It can be re-added later once the ARM32 bare-metal toolchain
problem has been resolved.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/278489328
Cc: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This defconfig tries to build an ARM Trusted Firmware version that
needs an ARM32 toolchain, which is not available as the platform is an
ARM64 one. The correct solution for this is to have a package in
Buildroot for an ARM32 bare-metal toolchain, but this wasn't done in
time for the 2019.08 release.
In order to not release 2019.08 with a broken defconfig, let's remove
it. It can be re-added later once the ARM32 bare-metal toolchain
problem has been resolved.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/278489329
Cc: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This defconfig tries to build an ARM Trusted Firmware version that
needs an ARM32 toolchain, which is not available as the platform is an
ARM64 one. The correct solution for this is to have a package in
Buildroot for an ARM32 bare-metal toolchain, but this wasn't done in
time for the 2019.08 release.
In order to not release 2019.08 with a broken defconfig, let's remove
it. It can be re-added later once the ARM32 bare-metal toolchain
problem has been resolved.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/278489325
Cc: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Andy Kennedy (andy.kennedy@adtran.com)<mailto:andy.kennedy@adtran.com>
The e-mail address you entered couldn't be found. Please check the
recipient's e-mail address and try to resend the message. If the
problem continues, please contact your helpdesk.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
<scjthm@live.com>: host live-com.olc.protection.outlook.com[104.47.5.33] said:
550 5.5.0 Requested action not taken: mailbox unavailable.
[HE1EUR02FT033.eop-EUR02.prod.protection.outlook.com] (in reply to RCPT TO
command)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
<marcin.nowakowski@imgtec.com>: host
mxa-00376f01.gslb.pphosted.com[185.132.180.163] said: 550 5.1.1 User
Unknown (in reply to RCPT TO command)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
<eswierk@skyportsystems.com>: host aspmx.l.google.com[108.177.127.27] said:
550-5.1.1 The email account that you tried to reach does not exist. Please
try 550-5.1.1 double-checking the recipient's email address for typos or
550-5.1.1 unnecessary spaces. Learn more at 550 5.1.1
https://support.google.com/mail/?p=NoSuchUser 33si1105652eds.275 - gsmtp
(in reply to RCPT TO command)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
His e-mail address @imgtec.com is bouncing:
<abhilash.tuse@imgtec.com>: host
mxa-00376f01.gslb.pphosted.com[185.132.180.163] said: 550 5.1.1 User
Unknown (in reply to RCPT TO command)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add support to test that the root passowrd is working as expected.
- Buildtime test: Check the hash present in the generated '/etc/shadow'.
- Runtime test: Build an armv7 image and try to login with a password.
Signed-off-by: Victor Huesca <victor.huesca@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[Thomas: license is MIT, not Apache-2.0]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit adds a minimal defconfig to build a Buildroot system for
the STM32MP157 Discovery Kit, which is the low-cost evaluation
platform for the new STM32MP157 system-on-chip from ST. This
system-on-chip features a single or dual Cortex-A7, a single
Cortex-M4, and a wide variety of peripherals.
This commit includes a custom linux configuration file, because there
is no specific defconfig for this platform in the kernel, only
multi_v7_defconfig supports it, which is really a massive
defconfig. That's why a custom linux configuration file is added.
A small U-Boot config fragment allows to disable the watchdog, so that
userspace by default doesn't need to have a watchdog daemon running.
The vendor U-Boot and Linux trees are used for the moment, but the
platform support is being upstreamed, so switching to upstream
versions will be possible in the relatively near future.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Peter is already listed in the DEVELOPERS file for board/raspberrypi/
and configs/raspberrypi3_defconfig, and in practice contributes
regularly to all RPi defconfigs. It makes sense to have him listed in
the DEVELOPERS file for all RPi defconfigs.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Acked-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Rafal was the last person modifying this defconfig. Let's add him as
the contact for this defconfig, so that he receives build failure
notifications and gets Cc'ed on patches.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Rafal Susz <rafal.susz@gmail.com>
Acked-by: Rafal Susz <rafal.susz@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Sergio added this defconfig a while ago, and is still active
contributing to Buildroot, so let's add him as the contact for this
defconfig, so that he receives build failure notifications and gets
Cc'ed on patches.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Sergio Prado <sergio.prado@e-labworks.com>
Cc: Scott Fan <fancp2007@gmail.com>
Acked-by: "Sergio Prado" <sergio.prado@e-labworks.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Luca Ceresoli has de-facto been updating/maintaining the
zynq_microzed_defconfig and zynq_zc706_defconfig for the past few
years, so let's add him in the DEVELOPERS for those two defconfigs.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Christophe has recently taken care of those defconfigs, so let's add
him as a contact for those defconfigs, so that he receives build
failure notifications and is Cc'ed on patches.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Christophe PRIOUZEAU <christophe.priouzeau@st.com>
Cc: Lee Jones <lee.jones@linaro.org>
Acked-by: Christophe Priouzeau <christophe.priouzeau@st.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Alexey was the last person to make significant changes to this
defconfig, so let's add him as a contact for the maintenance of this
defconfig.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Alexey Brodkin <alexey.brodkin@synopsys.com>
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Yann originally contributed this defconfig, and updated it regularly
afterwards, so let's list him as contact for this defconfig.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Acked-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabio has de-facto been maintaining this defconfig for the past few
years, so let's add him as a contact for it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Fabio Estevam <festevam@gmail.com>
Acked-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
restclient-cpp is a simple REST client library for C++
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The odroidc2_defconfig has been dropped in commit
b80712a16a, do it no longer makes sense
to list it in the DEVELOPERS file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The Python interface to the Redis key-value store.
https://github.com/andymccurdy/redis-py
Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
[Peter: hiredis is an optional runtime dependency, not build time]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Python extension that wraps protocol parsing code in hiredis.
It primarily speeds up parsing of multi bulk replies.
https://github.com/redis/hiredis-py
Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Enumerates all IP addresses on all network adapters of the system.
https://github.com/pydron/ifaddr
Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
[Thomas: add license file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bitcoin Core is an open source project which maintains and releases
Bitcoin client software called “Bitcoin Core”.
Signed-off-by: Fabio Urquiza <fabiorush@gmail.com>
[Thomas:
- Don't create a new blockchain applications sub-menu for now, put
this package in "Miscellaneous applications"
- Do not select BR2_INSTALL_LIBSTDCPP, use depends on instead, and
add the corresponding comment.
- Do not select BR2_TOOLCHAIN_BUILDROOT_USE_SSP. Instead pass
--disable-hardening, and let Buildroot pass the appropriate CFLAGS
when hardening features are enabled system-wide.
- Add missing BR2_TOOLCHAIN_HAS_ATOMIC dependency
- Add quirky !(BR2_arm || BR2_armeb) || BR2_USE_MMU because the
Cortex-M toolchains don't provide 8-byte __atomic intrinsics, but
we don't have a good way to express that today
- Add missing BR2_TOOLCHAIN_HAS_GCC_BUG_64735 due to the use of
std::future
- Use only one BITCOIN_CONF_OPTS assignment to pass all options]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds a new jack1 package alongside the existing jack2.
While jack1 and jack2 are two equivalent implementations of the same
protocol, they differ in a few details and both of them are being
actively used (jack2 is not considered to be a replacement of jack1).
It is not possible to enable both at the same time, so hide away jack1
when jack2 is enabled (to keep existing defconfig files working).
For more information, see:
https://github.com/jackaudio/jackaudio.github.com/wiki/Q_difference_jack1_jack2
Signed-off-by: Adam Heinrich <adam@adamh.cz>
[yann.morin.1998@free.fr:
- fix coding style
- use the release tarball, not a git clone
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
[Peter: add host-pkgconf dependency, reorder dependencies]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
An ASCII-art game like Space Invaders using ncurses.
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
sshguard protects hosts from brute-force attacks against SSH and other
services.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
[Peter: cleanup, start init script at S49, correct license, select iptables]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds support for the HiFive Unleashed board. This includes
building the firmware, kernel and rootFS for the HiFive Unleashed.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
[Thomas:
- fix the directory name hifive_unleased -> hifive-unleashed
- drop from readme.txt the instructions about manually flashing each
partition, since we have a full SD card image
- drop the custom post-image.sh script]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This initial support includes:
Custom u-boot
Linux v5.1
ATF v2.0
Buildroot default packages
Tested-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
[Thomas:
- Use BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_1
- Use final 5.1 kernel
- Use default ext2 filesystem]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This initial support includes:
u-boot v2019.04
Linux v5.0
Buildroot default packages
Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
[Thomas: use BR2_TARGET_UBOOT_BOOT_SCRIPT to generate the U-Boot
script, instead of doing it in the post-build]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This initial support includes:
Linux 5.1
Custom U-Boot
Arm Trusted Firmware v2.0
Buildroot default packages
Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
[Thomas:
- Use the headers from the kernel, by using
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_1=y
- Use the default ext2 rootfs size]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This initial support includes:
Linux 5.1
Custom U-Boot
Arm Trusted Firmware v2.0
Buildroot default packages
Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
[Thomas:
- Use the headers from the kernel, by using
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_1=y
- Use the default ext2 rootfs size]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This initial support includes:
Linux 5.1
Custom U-Boot
Arm Trusted Firmware v2.0
Buildroot default packages
Tested-by: Akash Gajjar <akash@openedev.com>
Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
[Thomas:
- Use the headers from the kernel, by using
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_1=y
- Use the default ext2 rootfs size]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This initial support includes:
Linux v5.2
Custom U-Boot
Arm Trusted Firmware v2.0
Buildroot default packages
Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
[Thomas:
- Use the kernel headers from the kernel, by using
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_2=y
- Use the final 5.2 kernel instead of rc1.
- Use the default ext2 rootfs size]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Piglit is an open-source test suite for OpenGL implementations.
It's an python3 script based around several tools like glxinfo,
wflinfo, dmesg.
Even though waffle support can be replaced by freeglut,
using pliglit with waffle is recommended since freeglut
will be replaced by waffle.
Add host-python-{mako,numpy,six} dependency since the build system
is checking with the host-python interpreter.
There is no comment about waffle dependency due to too complex
dependencies of waffle.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Reworked during the Buildroot summer camp 2019]
Signed-off-by: Romain Naour <romain.naour@smile.fr>
[Arnout: small corrections to license info. It's messy.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
PowerPC kernel developers were after a userspace for testing 32-bit
powerpc kernels. This machine both suits that requirement and has
support in qemu. It's also a fairly common piece of 32-bit ppc hardware.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Tested-by: Daniel Axtens <dja@axtens.net>
[Peter: lock kernel/headers to 5.2.4]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Adds the c-capnproto package. This creates a C plugin for the regular
capnproto capnpc compiler. It supports only serialization (no RPC).
Since it depends on capnproto, the package selects capnproto and has the
same requirements as capnproto.
The host version is always needed for the code generator, which is what
gets called by packages using it. The target version is also always
needed for the library. Therefore, no Config.in.host option is needed.
We need to use the git download method because the package has
submodules. The submodule is gtest, which is not really needed, but it's
complicated to remove the dependency.
The version is the latest upstream git hash. It is version 0.3 with just
two patches applied: one to the README file, and a fix submitted by us.
Signed-off-by: Joel Carlson <JoelsonCarl@gmail.com>
[Arnout:
- use latest upstream version which has patch already applied;
- mark in Config.in that dependencies come from capnproto;
- add some newlines to .mk file;
- updated commit message.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Email bounces:
<Qais.Yousef@imgtec.com>: host mxb-00376f01.gslb.pphosted.com[185.132.180.163]
said: 550 5.1.1 User Unknown (in reply to RCPT TO command)
Last mailing list postings date back to 2012.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A string transformation library that singularizes and pluralizes English
words, and transforms strings from CamelCase to underscored string.
Inflection is a port of Ruby on Rails' inflector to Python.
https://github.com/jpvanhal/inflection
Signed-off-by: John Faith <jfaith@impinj.com>
[Arnout: select unicodedata, add hash for license file]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Email bounces:
<markos.chandras@imgtec.com>: host
mxa-00376f01.gslb.pphosted.com[185.132.180.163] said: 550 5.1.1 User
Unknown (in reply to RCPT TO command)
Last mailing list postings date back to 2015.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A Python module providing bindings for the cairo graphics library.
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Implements a native Python implementation of DBus for Twisted.
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A protocol neutral RPC library that supports JSON-RPC and zmq.
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package provides Python bindings for iptables.
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Thomas: add license file]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package provides a simple cross-platform API for printing
colored terminal text.
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add support for the SolidRun Armada 8040 based Clearfog GT-8K. This
board has the same processor as the Macchiatobin, so we can reuse the
Macchiatobin U-Boot and image definitions.
The kernel fragment enables drivers that are necessary to make
networking ports work (SFP, Ethernet port, and Ethernet switch).
Cc: Jan Kundrát <jan.kundrat@cesnet.cz>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Mender-grubenv contains the boot scripts and tools used by Mender to
integrate with the Grub2 bootloader.
The user must select the following Grub modules for this package:
loadenv, hashsum, echo, halt, gcry_sha256, and test.
Because this patch also includes a grub version of fw_printenv and fw_setenv,
package/mender/Config.in must be changed as well at the same time, because if
both uboot-tools and this package are selected, during startup, mender calls
the uboot-tools version of fw_printenv and fails to start.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Tested-by: Mirza Krak <mirza.krak@northern.tech>
Acked-by: Mirza Krak <mirza.krak@northern.tech>
[Arnout:
- reorder depends clauses;
- add runtime tag to grub2 dependency
- remove wchar dependency from comment
- only error if BR_BUILDING
- use install instead of cp for a single file.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Force the build system to use python2 interpreter.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas: add docs/COPYING.MPL docs/copying.htm to the license files.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Libubootenv is a library that provides a hardware independent
way to access to U-Boot environment.
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Matplotlib is a Python 2D plotting library
which produces publication quality figures
in a variety of hardcopy formats and interactive
environments across platforms.
More information is available at:
https://matplotlib.org/.
Signed-off-by: Jugurtha BELKALEM <jugurtha.belkalem@smile.fr>
[Peter: use Python-2.0 for license, fix license file, add host-pkgconf]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Creates a Cycler object much like cycler, but
includes input validation.
This package is required by matplotlib.
Signed-off-by: Jugurtha BELKALEM <jugurtha.belkalem@smile.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This basic skeleton is similar to skeleton-init-sysv.
All links in /var are same as in skeleton-init-sysv to be compatible
with current default filesystem scheme.
Exceptions:
* /dev/shm and /dev/pts dirs were removed, since they are created by
openrc devfs service
* /etc/fstab does not need /dev/shm, /dev/pts and /sys entries
becuse they are mounted by devfs and sysfs services respectively
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This adds openrc init system package. This performs default openrc
installation with openrc-init that acts as pid1.
MKPKGCONFIG=no:
openrc does not use pkg-config per se, if MKPKGCONFIG is enabled,
it will just install *.pc files on rootfs for other programs to
find librc and libeinfo. These libs expose C api to control openrc
(al rc-* functions use it). From the looks of it, these libs would
be usefull if user wanted to write his own programs to manage
services, and vast majority of people using openrc won't need it.
Also, that's the reason why there is not INSTALL_STAGING=yes.
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* Redis 5 now supports reproducible builds via SOURCE_DATE_EPOCH
* Add myself to DEVELOPERS for Redis
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Very similar to orangepi-zero, except that the board has a 16MB SPI flash, a
2nd ethernet port is provided through a Realtek RTL8152 and wifi is provided
through a Realtek RTL8189FTV (no mainline driver, not supported).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
enet will be used by supertuxkart 1.0.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Suricata is a free and open source, mature, fast and robust
network threat detection engine.
The Suricata engine is capable of real time intrusion
detection (IDS), inline intrusion prevention (IPS), network
security monitoring (NSM) and offline pcap processing.
https://suricata-ids.org
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
An autocompletion tool for Python that can be used for text
editors.
https://github.com/davidhalter/jedi
python-jedi is a runtime dependency of ipython 7.3.0
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas: add license for the flask theme]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A Python Parser.
https://github.com/davidhalter/parso
python-parso is a runtime dependency of python-jedi
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas: mention Python-2.0 and BSD-3-Clause in licenses]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Specifications for callback functions passed in to an API.
https://github.com/takluyver/backcall
No license source files are provided from current version, however
upstream added one:
https://github.com/takluyver/backcall/blob/master/LICENSE
python-backcall is a runtime dependency of python-inotify 7.3.0
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add Andes 32-bit defconfig for AE3XX platform.
Signed-off-by: Che-Wei Chuang <cnoize@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Nylon Chen <nylon7@andestech.com>
[Thomas:
- fix commit title to match the defconfig name
- use the external toolchain package]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit adds a new package for the Andes external toolchain for
the nds32 Little Endian architecture.
https://github.com/vincentzwc/prebuilt-nds32-toolchain/releases/download/20180521/nds32le-linux-glibc-v3-upstream.tar.gz
Signed-off-by: Che-Wei Chuang <cnoize@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Nylon Chen <nylon7@andestech.com>
[Thomas:
- rename .mk and .hash files to carry the proper package name
- fix <pkg>_SITE variable, which was incorrect
- add prompt in Config.in
- add missing include of Config.in in toolchain/toolchain-external/Config.in
- add missing selects for RPC and SSP, since the toolchain supports
both
- drop BR2_TOOLCHAIN_EXTERNAL_URL option, the toolchain URL is
provided by the .mk file]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit provides basic support for the Andes 32-bit (nds32)
architecture.
Signed-off-by: Che-Wei Chuang <cnoize@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Nylon Chen <nylon7@andestech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Louis-Paul Cordier <lpdev@cordier.org>
[Thomas:
- add missing Config.in comment
- add missing select BR2_PACKAGE_LIBDRM_INTEL, needed as the code
uses a header file installed only when libdrm-intel is enabled
- add patch to drop -fstack-protector in order to support toolchains
without SSP support]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Louis-Paul Cordier <lpdev@cordier.org>
[Thomas:
- add missing Config.in comments
- fix minor nit in the _LICENSE variable
- add patch to drop hardening options, especially -fstack-protector,
which was causing the build to fail on toolchains without SSP
support]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The DaCapo benchmark suite is intended as a tool for Java benchmarking
by the programming language, memory management and computer
architecture communities.
Depends on the OpenJDK package for Java runtime environment.
Signed-off-by: Daniel J. Leach <dleach@belcan.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
--with-slang has to be given explicitly, otherwise the configure script
looks for slang.h in host directories.
Signed-off-by: Sven Oliver Moll <svolli@svolli.de>
[Arnout: add --with-slang config option]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
LibHTP is a security-aware parser for the HTTP protocol and the related
bits and pieces.
https://github.com/OISF/libhtp
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas: always disable SSP, let our gcc/wrapper handle that]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Needed for Kodi 18.x-compatible version of kodi-screensaver-rsxs.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Library and utility for TOTP based attestation using the tpm2-tss software
stack.
Add an upstream patch to fix format string mismatch errors when building for
32bit architectures.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
I left DATACOM and will unlikely have access to the hardware required to
test the package.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The current address will soon become invalid so drop it before the
messages start bouncing.
Change-Id: If631cedcaaa55d927d99b18ff299324e9d439cb0
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Oniguruma is a modern and flexible regular expressions
library. It encompasses features from different regular
expression implementations that traditionally exist in
different languages.
https://github.com/kkos/oniguruma
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Library for using PKCS#11, which includes an engine for OpenSSL that
lets it use PKCS#11 modules. Which is really what this package is
about, not that libp11 library itself, which has no users outside the
of OpenSSL engine.
If p11-kit is enabled, configure the engine to use that as the default
PKCS#11 module. That module is a sort of multiplexer that allows
multiple modules to be used at once, so it makes sense to use it even
if there are other modules present, e.g. softhsm2, nssckbi,
pkcs11-proxy, ykcs11, etc.
A host package is created too, with a host configuration option.
Since this a dynamically loaded module, there is no build time reason
to select it from a host package. It could be used by host openssl,
to allow host rauc to sign a software update bundle using a key from a
HSM with a PKCS#11 interface.
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Tested-by: Frank Hunleth <fhunleth@troodon-software.com>
[Thomas:
- add entry in DEVELOPERS file
- add missing !BR2_STATIC_LIBS dependency
- fix license information, as noticed by Frank Hunleth
- add missing dependency on host-pkgconf, needed by the configure
script to detect openssl
- explicitly pass --with-enginesdir as the value returned by
pkg-config is incorrectly prefixed by the sysroot]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
http://libcamera.org/
Cameras are complex devices that need heavy hardware image processing
operations. Control of the processing is based on advanced algorithms
that must run on a programmable processor. This has traditionally been
implemented in a dedicated MCU in the camera, but in embedded devices
algorithms have been moved to the main CPU to save cost. Blurring the
boundary between camera devices and Linux often left the user with no
other option than a vendor-specific closed-source solution.
To address this problem the Linux media community has very recently
started collaboration with the industry to develop a camera stack that
will be open-source-friendly while still protecting vendor core IP.
libcamera was born out of that collaboration and will offer modern
camera support to Linux-based systems, including traditional Linux
distributions, ChromeOS and Android.
The project has not made an official release as of yet, so we're
using the latest sha1 from master
We utilise C++ 11 but we mandate GCC5+ due to a bug [0] in earlier
versions which result in compile failures on our code base.
[0] Bug 54316 - [C++11] move constructor for stringstream
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=54316
Documentation and Tests are disabled from the build.
With the following added to libcamera.config:
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
BR2_PACKAGE_LIBCAMERA=y
./utils/test-pkg -c libcamera.config -p libcamera
br-arm-full [1/6]: SKIPPED
br-arm-cortex-a9-glibc [2/6]: OK
br-arm-cortex-m4-full [3/6]: SKIPPED
br-x86-64-musl [4/6]: OK
br-arm-full-static [5/6]: SKIPPED
sourcery-arm [6/6]: SKIPPED
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas:
- add missing Config.in comment
- remove empty newline at end of hash file
- adjust indentation of upstream URL in Config.in help text]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A bash-based automated testing system.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now that the package has been removed, get-developers complains:
WARNING: 'package/lunit/' doesn't match any file
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add gettext-tiny package from the sabotage-linux project:
gettext-tiny provides lightweight replacements for tools typically used
from the GNU gettext suite, which is incredibly bloated and takes a lot
of time to build (in the order of an hour on slow devices). the most
notable component is msgfmt which is used to create binary translation
files in the .mo format out of textual input files in .po format. this
is the most important tool for building software from source, because it
is used from the build processes of many software packages.
Some files were taken from gettext-gnu (some po/* files and gettextize
script) to make possible perform gettextizing of packages.
The main purpose of gettext-tiny is to replace gettext for the "host" if
NLS support is not needed. There is no option to manually select
gettext-gnu or gettext-tiny, it is done automatically by virtual gettext
package. For the target gettext-tiny only installs gettext tool echo-wrapper
which might be called from shell scripts (i.e. ecryptfs-utils).
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
gst1-plugins-bayer2rgb-neon[1] is a gstreamer1 plugin which uses
bayer2rgb-neon library to decode raw camera bayer to RGB using NEON
hardware acceleration.
[1] https://git.phytec.de/gst-bayer2rgb-neon
Signed-off-by: Eloi Bail <eloi.bail@savoirfairelinux.com>
[Thomas:
- add entry to DEVELOPERS file
- add .hash file
- adjust Config.in to match bayer2rgb-neon
- add Config.in comment
- drop --prefix=/usr from CONF_OPTS]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
bayer2rgb-neon[1] is a library which allows decoding raw camera bayer
to RGB using NEON hardware acceleration.
[1]: https://git.phytec.de/bayer2rgb-neon/
Signed-off-by: Eloi Bail <eloi.bail@savoirfairelinux.com>
[Thomas:
- use "config" instead of "menuconfig"
- use BR2_ARM_CPU_HAS_NEON instead of BR2_ARM_ENABLE_NEON
- use BR2_INSTALL_LIBSTDCPP instead of BR2_TOOLCHAIN_BUILDROOT_CXX
- add dependency on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9, because the code
is using C++11
- add missing Config.in comment
- drop --prefix=/usr from CONF_OPTS, it is passed by the
autotools-package infrastructure
- simplify CFLAGS logic
- move from "Applications" to "Libraries" in menuconfig
- add missing .hash file
- add entry in DEVELOPERS file]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
PyJWT is a Python library which allows you to encode and decode
JSON Web Tokens (JWT). JWT is an open, industry-standard (RFC 7519)
for representing claims securely between two parties.
https://github.com/jpadilla/pyjwt
Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
[Arnout: bump to 1.7.1]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This adds a new package for brickd. Brickd is system management daemon
for the LEGO MINDSTORMS EV3 programmable brick.
Signed-off-by: David Lechner <david@lechnology.com>
[Thomas: add missing BR2_USE_MMU dependency]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
OpenSBI is a much improved alternative to BBL (riscv-pk). Add OpenSBI
support to buildroot.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
[Thomas:
- disable target installation, as we install nothing
- enable staging installation
- enable images installation only when needed
- improve the comment about the staging installation]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Refik Tuzakli <refik.tuzakli@savronik.com.tr>
[Thomas:
- add missing dependency on BR2_TOOLCHAIN_HAS_GCC_BUG_64735 and
corresponding Config.in comment
- add missing dependency on BR2_INSTALL_LIBSTDCPP and update
Config.in comment
- add comment to explain why -DTHREADS_PTHREAD_ARG=OFF is passed in
CONF_OPTS]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This reverts commit 0bb0f2ba84, because
using "host-binutils" is not correct as it should only be used with
internal toolchains, and not external toolchains.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
mender-artifact is a host tool to generate update images
in the Mender artifact file format.
This package uses the binary archive from github because it bundles the
external dependencies.
Example usage:
$ mender-artifact write rootfs-image \
--update rootfs.ext4 \
--output-path rootfs.mender \
--artifact-name "release-v1.0.0" \
--device-type "beaglebone"
Above will generate a Mender artifact called "rootfs.mender"
containing the "rootfs.ext4" image along with meta-data.
One can read-out the meta-data with the following command:
$ mender-artifact read rootfs.mender
Mender artifact:
Name: release-v1.0.0
Format: mender
Version: 2
Signature: no signature
Compatible devices: '[beaglebone]'
Updates:
0000:
Type: rootfs-image
Files:
name: rootfs.ext4
size: 52428800
modified: 2018-08-27 09:10:55 +0200 CEST
checksum: e70b113fb0964a810a3043586eb4fc1c48e684ba78b02ba65fead4aa3e540d87
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Tested-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
aiomonitor adds monitor and python REPL capabilities for
asyncio application.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Asynchronous console and interfaces for asyncio.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Generate simple tables in terminals from a nested list of strings.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This test is a simple "Hello, World" integration test of the OpenJDK
package.
It compiles the Java app on the host, then runs it on an emulated
AARCH64 target and verifies "Hello, World" is printed.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
OpenJDK is a free and open-source implementation of the Java Platform.
This package provides the option to build a client or a server JVM
interpreter.
The default option is the server option, as that is what the majority
of users use. This JVM interpreter loads more slowly, putting more
effort into JIT compilations to yield higher performance.
Unlike most autotools packages, OpenJDK is exceptionally different and
has many quirks, some of which are below:
- X11, alsa, and cups are required to build Java, even if it's a headless build.
See
http://hg.openjdk.java.net/jdk10/jdk10/raw-file/tip/common/doc/building.html#external-library-requirements
for more information.
- host-zip is needed for the zip executable.
- There is no autogen.sh file, instead, a user must call "./configure
autogen."
- OpenJDK ignores some variables unless passed via the environment.
These variables are: PATH, LD, CC, CXX, and CPP.
- OpenJDK defaults ld to the ld binary but passes -Xlinker and -z as
arguments during the linking process, which causes linking failures.
To fix this issue, ld is set to gcc.
- Make -jn is unsupported. Instead, one must use the "--with-jobs="
configure option, and use $(MAKE1).
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[Thomas:
- drop explanations about CC, LD, CXX, etc. be set to their "actual
binaries" instead of ccache: TARGET_CC/TARGET_LD/TARGET_CXX point
to the compiler wrapper, so the usage of ccache is hidden
- make sure at least one of the variants is enabled in Config.in
- drop the submenu for variant selection
- use system zlib instead of the bundled one. This works fine when
BUILD_SYSROOT_CFLAGS and BUILD_SYSROOT_LDFLAGS are passed
- fix minor nits in the Config.in comments]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Prelink-cross emulates a runtime linker for a given sysroot. This is
necessary to allow gobject-introspection to build it's typelib files
during cross-compiling.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: drop Config.in.host file and visible option.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This library was previously a part of sunxi-mali.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The package sunxi-mali-mainline is available for recent kernels.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Python library to scan and decode advertised BLE info.
Uses asyncio.
https://github.com/frawau/aioblescan
Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This defconfig was added in October 2016 and was never updated since
then. It currently fails to build because U-Boot is too old and
doesn't build with host-openssl in version 1.1.x.
On February 13, 2019, the original submitter was notified, but didn't
reply, so let's remove the defconfig for this platform.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/165766194
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
OP-TEE performance benchmark tools for the OP-TEE project.
This packages generates embedded Linux based OS materials used
to retrieve execution timing information on invocation of the
OP-TEE secure services.
It is added next to the OP-TEE client package in BR configuration.
This change references in Buildroot the today's latest OP-TEE
revision release tagged 3.4.0.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
[Thomas:
- drop version selection
- propagate the dependency of optee-client]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
OP-TEE test package provide test materials as part of the OP-TEE
project helping platforms to verify their OP-TEE components
against a set of regression and performance tests.
Package is added in the BR package configuration next to the
OP-TEE client package.
This change references in Buildroot the today's latest OP-TEE
revision release tagged 3.4.0 with an added patch to fix an issue
reported by recent GCC toolchains.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
[Thomas:
- drop version selection
- propagate !BR2_STATIC_LIBS dependency of optee-client
- make sure BR2_TARGET_OPTEE_OS_SDK is selected
- use a patch generated by git format-patch
- simplify the construct to build the examples]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package generates embedded Linux based OS userland client
applications and OP-TEE OS trusted applications all embedded in the
file system. These applications shows how to use the APIs OP-TEE OS is
based on, both in the non secure and secure worlds.
Package is added next to the OP-TEE client package in the BR package
configuration.
This change references in Buildroot the today's latest OP-TEE revision
release tagged 3.4.0 with an added patch to fix an issue reported by
recent GCC toolchains.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
[Thomas:
- drop version selection
- propagate !BR2_STATIC_LIBS dependency of optee-client
- make sure BR2_TARGET_OPTEE_OS_SDK is selected
- use a patch generated by git format-patch
- simplify the construct to build the examples]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
OP-TEE client API library and supplicant daemon from the
OP-TEE project are packaged in package/optee-client. An init script
launches the tee-supplicant deamon. Package is added to the
Security menu of BR configuration.
This change references in Buildroot the today's latest OP-TEE
revision release tagged 3.4.0.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
[Thomas:
- remove version selection
- add dependency on !BR2_STATIC_LIBS, as it unconditionally builds a
shared library]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Here is the list of the changes compared to the removed mongodb 3.3.4
version:
- Remove patch (not applicable anymore)
- Add patch (sent upstream) to fix openssl build with gcc 7 and
-fpermissive
- Remove 32 bits x86 platforms, removed since version 3.4:
https://docs.mongodb.com/manual/installation/#supported-platforms
- Change license: since October 2018, license is SSPL:
- https://www.mongodb.com/community/licensing
- https://jira.mongodb.org/browse/SERVER-38767
- gcc must be at least 5.3 so add a dependency on gcc >= 6
- Add a dependency on host-python-xxx modules:
https://github.com/mongodb/mongo/blob/r4.0.6/docs/building.md
- Use system versions of boost, pcre, snappy, sqlite, yaml-cpp and zlib
instead of embedded mongodb ones
- Add hash for license files
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Tested-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Reviewed-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Reviewed-by: Adrian Perez de Castro <aperez@igalia.com>
[Thomas:
- add missing depends on BR2_HOST_GCC_AT_LEAST_4_8
- improve comments on depends on
- add missing "comment" for toolchain dependencies
- add missing "depends on BR2_PACKAGE_WPEWEBKIT_ARCH_SUPPORTS" on the
Config.in comment
- add missing "select BR2_PACKAGE_WAYLAND", which is needed to select
BR2_PACKAGE_WAYLAND_PROTOCOLS
- fix typoes in the JIT enabling code that was using
WEBKITGTK_CONF_OPTS instead of WPEWEBKIT_CONF_OPTS]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Reviewed-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Reviewed-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
OP-TEE OS is maintained by the OP-TEE project. It provides an
open source solution for development and integration of secure
services for Armv7-A and Armv8-A CPU based platforms supporting
the TrustZone technology. This technology enables CPUs to
concurrently host a secure world as the OP-TEE OS and a non-secure
world as a Linux based OS.
The OP-TEE project maintains other packages to leverage OP-TEE on
Linux kernel based OSes. An OP-TEE interface driver is available
in the Linux kernel since 4.12 upon CONFIG_OPTEE.
This change references in Buildroot the today's latest OP-TEE
revision release tagged 3.4.0.
https://www.op-tee.org/https://github.com/OP-TEE/optee_os
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
[Thomas:
- pass CFG_ARM32_core=y when building for ARMv7, otherwise the build
fails
- add a check that verifies that BR2_TARGET_OPTEE_OS_PLATFORM is not
empty
- minor formatting fixes/adjustements.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Paradoxically, building OpenJDK requires a pre-existing JDK. This
pre-existing JDK is called the "boot JDK."
The boot JDK for building JDK major version N should be a JDK of major
version N-1, so for building JDK11, JDK10 would be needed. This
requirement is an issue when building on most distributions, as the
host JDK tends to be JDK8.
The AdoptOpenJDK project provides binaries that can act as the boot
JDK to build the target JDK, which is what this package provides.
Currently, only a x86_64 host is supported, for two reasons:
1) A 32bit x86 binary distribution is not available from AdoptOpenJDK
2) We didn't had access to a host machine using an architecture other
than x86-64
The provided unpack200 has an invalid RPATH and relies on libzlib.
When host-libzlib runs the install step, the following error is
generated:
*** ERROR: package host-libzlib installs executables without proper RPATH:
*** $(HOST_DIR)/bin/unpack200
Because unpack200 is a deprecated tool, removing it after installation
is safe and fixes the issue.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[Thomas:
- fix comments in the code
- use the more usual "cp -dpfr" command to copy files over]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Configuration contains:
- building tpl, spl and u-boot (forked u-boot repository)
- booting from SD card and network via PXE
- working ethernet, usb and uart
- minimal rootfs with busybox
- ready to flash SD card image
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add tool which allows to setup broadcom bluetooth
device via UART.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: add hash for license file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The qtuio package uses the obsolete qt4 package, which we are about to
remove, so remove qtuio as well.
CC: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The python-pyqt package uses the obsolete qt4 package, which we are about to
remove, so remove python-pyqt as well.
CC: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This package adds NXP Layerscape and QoriQ reset config word
(RCW) / pre-bootloader (PBL) generation support.
The RCW is used to setup clocking and IO allocations and then launches
the next stage of boot (usually u-boot).
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
GstShark leverages GStreamers newest instrumentation subsystem by
installing a set of custom hooks to the trace points. A variety of
data analytics are extracted and presented to the user in a graphical,
friendly way.
https://developer.ridgerun.com/wiki/index.php?title=GstSharkhttps://github.com/RidgeRun/gst-shark
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: João Victor Oliveira <jv.oliveirag@gmail.com>
Cc: Adam Duskett <aduskett@gmail.com>
Cc: Igor Miranda <igorcmiranda3110@gmail.com>
[Thomas:
- fix package prompt to be gtk1-shark in Config.in
- license is LGPL-2.1+, not LGPL-2.1
- add entry to DEVELOPERS file]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A free media server.
Stream your media to devices on your home network.
https://gerbera.io
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas:
- fix S99gerbera to be compliant with the init script pattern
that was recently put in place
- add -l option in init script for logging
- license code is GPL-2.0]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
http://autobuild.buildroot.net/results/afd/afdc598b80356a8301d890232466de421f7779d5/
Luacrypto fails to build with openssl 1.1.x. The package has not seen any
functional changes since it was added in 2013 and has no reverse
dependencies.
The upstream repository (https://github.com/starius/luacrypto) explicitly
states:
this project is deprecated, use luaossl
So remove the package.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Utility for testing pluggable authentication modules (PAM) facility.
While specifically designed to help PAM module authors to test their
modules, that might also be handy for system administrators interested
in building a centralised authentication system using common standards
such as NIS, SASL and LDAP.
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Peter: drop spelling fix patch]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This tool is used to send commands to imx6 based hardware using NXP's
UTP protocol.
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Vincent Prince <vincent.prince.fr@gmail.com>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package contains a set of tools to manipulate RTC devices. They
are written and maintained by the RTC subsystem Linux kernel
maintainer, Alexandre Belloni.
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds a package for 'shim', an EFI bootloader for secure
boot chain loading.
While gnu-efi supports 32bit ARM, this is currently broken in shim.
Patches to fix this have been submitted upstream but are not included
here for now.
https://github.com/rhboot/shim/pull/162
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Thomas: use BR2_PACKAGE_GNU_EFI_ARCH_SUPPORTS, add separate depends
on to exclude ARM32 build.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds the Entertainment Arts Standard Template Library.
The initial version uses the latest hash so that the aarch64 support
is included vs Buildroot having to apply the aarch64 support patch.
Signed-off-by: Maury Anderson <maury.anderson@rockwellcollins.com>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Thomas:
- add missing BR2_INSTALL_LIBSTDCPP dependency
- use the github helper instead of the git site method, and adjust
hash consequently
- drop INSTALL_TARGET_CMDS, the default cmake-package implementation
works fine]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Ilya Averyanov <averyanovin@gmail.com>
[Thomas:
- add missing dependencies on expat and zlib
- add missing depends on C++ and dynamic library support, and the
corresponding Config.in comment
- add the missing entry to the DEVELOPERS file
- add the missing hash for the license file
- adjust indentation in the Config.in file
- use --disable-unittest instead of --enable-unittest=no.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
His e-mail address is no longer valid. Sending an e-mail to this
address says (yes, the actual text is in French):
Veuillez prendre note que cette adresse n'est plus valide à la suite du départ de l'employé.
which means:
Please take note that this address is no longer valid following the employee departure.
Therefore, it does not make sense to list Sebastien in our DEVELOPERS
file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Vicente is no longer working at Imgtec, and his e-mail is now
bouncing:
<Vincent.Riera@imgtec.com>: host
mxa-00376f01.gslb.pphosted.com[185.132.180.163] said: 550 5.1.1 User
Unknown (in reply to RCPT TO command)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add initial support for Orangepi Lite2 board with below features:
- U-Boot 2018.09
- Linux 4.19.0-rc8
- Default packages from buildroot
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add initial support for Orangepi One Plus board with below features:
- U-Boot 2018.09
- Linux 4.19.0-rc8
- Default packages from buildroot
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libpagekite is a C implementation of the backend of the PageKite relay
protocol. It allows external access to embedded devices without public
IP address.
There is a bundled version of libev but we prefer to use the global
libev library.
Although the configure script has a --without-openssl option, it
doesn't actually build without openssl.
Patch 0001-configure.ac-fix-handling-of-with.patch is needed because
we want to explicitly pass --with and --without options, even if they
are the default. The way the AC_ARG_WITH macros were used, --with and
--without both had the effect of enabling the option.
Patch 0002-configure.ac-use-AS_HELP_STRING-for-with-openssl.patch is
not needed for Buildroot, but it is part of the same upstream PR and
would generate a conflict for the next patch.
Patch 0003-configure.ac-use-pkg-config-for-openssl.patch is needed to
pass -lz (needed by openssl) in static compilation.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
[Thomas:
- As noticed by Romain Naour, fix the prompt of the package in the
Config.in
- Add entry to DEVELOPERS file
- Drop the dependency on BR2_bfin, since this architecture has been
dropped from Buildroot.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[Thomas:
- rename BR2_PACKAGE_NETSURF_FRAMEBUFFER to BR2_PACKAGE_NETSURF_SDL,
and use "sdl" everywhere instead of "framebuffer", since really SDL
can display on something else than the framebuffer
- use a "depends on BR2_PACKAGE_LIBGTK2" instead of a "depends on
BR2_PACKAGE_XORG7 + many other depends on + select
BR2_PACKAGE_LIBGTK2"
- use PKG_CONFIG_HOST_BINARY for the pkg-config path]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Jobs scheduler for managing background task (asyncio).
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Control remote side information.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Security for aiohttp.web.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Server-sent events support for aiohttp.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Sessions for aiohttp.web.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Erico Nunes recently contributed this defconfig, we can safely assume
he is willing to maintain it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Lothar contributed this board not long ago, so let's assume he is
willing to take care of it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
His e-mail @rockwellcollins.com is bouncing:
<bryan.brinsko@rockwellcollins.com>: host
mail05.rockwellcollins.com[205.175.227.28] said: 550 #5.1.0 Address
rejected. (in reply to RCPT TO command)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This tool allows to verify if the OpenCL environment is set up correctly
and provides information related to the supported OpenCL platforms.
Signed-off-by: Valentin Korenblit <valentin.korenblit@smile.fr>
Signed-off-by: Valentin Korenblit <valentinkorenblit@gmail.com>
[Thomas:
- use the libopencl virtual package
- add LICENSE to the license files]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A flexible forms validation and rendering library for
Python web development.
https://wtforms.readthedocs.io/
Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libtorrent is a feature complete C++ bittorrent implementation
focusing on efficiency and scalability.
https://www.libtorrent.org/
Signed-off-by: Philipp Richter <richterphilipp.pops@gmail.com>
[Thomas: license is BSD-3c, not BSD-2c]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Mini SNMPd is a minimal implementation targeted at small or embedded
UNIX systems with limited resources.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
[Thomas: add hash file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is a core Perl module (ie. included in the Perl distribution), so
there is no point in having a separate package for it.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Robert Rose <robertroyrose@gmail.com>
[Thomas:
- add missing Config.in dependencies inherited from
BR2_PACKAGE_PROTOBUF, as well as the corresponding Config.in
comment
- replace spaces by tabs in grpc.mk indentation
- remove superfluous GRPC_SOURCE variable
- improved patch description.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
[Thomas: add entry in DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fail2ban scans log files (e.g. /var/log/apache/error_log)
and bans IPs that show malicious behaviours.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
[Thomas: simplify $(SED) expression by using comma as a separator
instead of slash.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Ryan Barnett <ryan.barnett@rockwellcollins.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
[Peter: fix alphabetical ordering as suggested by Ryan]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
paho-mqtt-c 1.3.0 is the current stable version of paho-mqtt-c.
The patch 0001-Declare-mqtt-tests-as-a-C-only-project.patch is no longer
required, a similar fix was applied upstream with:
a87450ebcefed573ad4cdac77e2c893a3c314762.
Signed-off-by: Julien Grossholtz <julien.grossholtz@openest.io>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
cChardet is high speed universal character encoding detector.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Simple DNS resolver for asyncio.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
I am now maintaining / submitting regular patches for the Go toolchain as well.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tiago is leaving the company and is unlikely to have access to the hardware
required to test the package.
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Having a host variant of this package is useful to create f2fs
filesystem images.
Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
[Thomas: add explicit --without-blkid and --without-selinux options,
following the review from Yann E. Morin.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds davici which is an alternative implementation of the
VICI client protocal used by Strongswan. It targets better integration
with software stacks and uses a asynchronous, non-blocking API that can
be integrated in third-party main dispatching loops without the use of
threads.
Signed-off-by: Jared Bents <jared.bents@rockwellcollins.com>
[Thomas: fix license, it's LGPL-2.1+, add entry in DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add initial support for Amarula A64-Relic board
with below features:
- U-Boot 2018.07
- Linux 4.17.0-rc6
- Default packages from buildroot
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[Thomas: add missing BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y and
BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y options.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
