The filesystem types can benefit from this script to prevent common
mistakes when submitting patches.
In order to accomplish this:
Do not ignore anymore files from the fs/ directory.
Ignore fs/common.mk as it declares a package infra and not a package itself.
Register the ROOTFS_ as a valid prefix for variables.
Ignore these symbols:
- PACKAGES_PERMISSIONS_TABLE: defined either by packages through
pkg-generic or by filesystem types, used by fs/common.mk;
- SUMTOOL: defined by package mtd, used by filesystem jffs2;
- TARGETS_ROOTFS: defined by filesystem types, used in the main
Makefile.
Keep using loose checks that warn about common mistakes while keep the
code simple.
As a consequence the check functions do not differentiate between
packages and filesystems so the symbol PACKAGE_UBI would not generate a
warning for the ubi filesystem neither the symbol ROOTFS_MTD would
generate a warning for the mtd package. But those kind of mistakes are
not common and are obvious in the code review, unlike typos i.e.
ROOTFS_UBl or PACKAGE_MID that would be hard to see in the code review.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
... to follow the convention: type, default, depends on, select, help.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This directory can benefit from this script to prevent common mistakes
when submitting patches.
In order to accomplish this:
Do not ignore anymore files from the boot/ directory.
Ignore boot/barebox/barebox.mk as it declares a package infra and not a
package itself.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Rearrange the header of the .mk file so it becomes similar to a header
from a package. It doesn't fit in one line, so split the details to a
comment below the header.
GCONV_LIBS is only used inside this file, so rename it to start with
TOOLCHAIN_, following the namespace convention already used by packages.
Rename the hook COPY_GCONV_LIBS to TOOLCHAIN_GLIBC_COPY_GCONV_LIBS
following the convention used for hooks in packages.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The header of the .mk file fits in one line, so rearrange it to be
similar to a header from a package.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
toolchain-common.in is a Config.in file with an uncommon name.
It is just included by toolchain/Config.in, and toolchain/Config.in is
not that long, so instead of renaming the file, merge it to
toolchain/Config.in.
Move the raw contents from the file to the exact location it is
currently included in order to not change the order in the menu.
Update the references in the manual as well.
Suggested-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
These three symbols:
KERNEL_ARCH_PATH
KERNEL_DTBS
KERNEL_DTS_NAME
are defined and used only inside this file, so use the LINUX_ namespace
for them instead of KERNEL_.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use only one space before backslash.
Remove consecutive empty line.
Indent with tabs.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Make it follow the package coding style by removing redundant info.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Christian Stewart <christian@paral.in>
Cc: David Lechner <david@lechnology.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The header of the initramfs.mk file fits in one line, so rearrange it.
Remove consecutive empty line.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
UBINIZE_CONFIG_FILE_PATH is only used inside this file, so rename it to
start with UBI_, following the namespace convention already used by
common packages.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
... to follow the convention: type, default, depends on, select, help.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
These directories can benefit from this script to prevent common
mistakes when submitting patches.
In order to accomplish this:
Do not ignore anymore files from these directories.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
... to follow the convention: type, default, depends on, select, help.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently the script only checks files inside the package/ directory.
Upcoming patches will enable it for other directories.
In order to reliably test for file names, i.e. the Config.in in the base
directory, normalize the path of files to check to a relative path to
the base directory.
Rename the variable that holds the compiled regexp to better represent
its content and rearrange how it is declared to make easy to later add
new directories to check. As a consequence the files that declare
package infra types would not be ignored anymore, so create a new
variable to list the files intree to be ignored during the check. The
same variable will be used by upcoming patches to ignore other files.
Ignore pkg-*.mk and doc-asciidoc.mk since they are package infra files.
In order to not produce weird results when used for files outside the
tree (i.e. in a private br2-external) add an explicit command line
option (-b) that bypasses any checks that would make a file be ignored
by the path that contains it.
When in this out-of-tree mode, the user is responsible for providing a
list of files to check that do not contain files the script does not
understand, e.g. package infra files.
As a result of this patch, besides the known use:
$ ./utils/check-package package/new-package/*
someone with the utils/ directory in the path can now also run:
$ cd package/new-package/
$ check-package *
or
$ check-package -b /path/to/br2-ext-tree/package/staging-package/*
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Rename the .mk to follow the convention. The variables inside it already
use the correct name.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use only one space before backslash.
Indent with tabs.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 3a0c20c530 (scanpypi: add support for Python3) adapted the script
to work with python 3.x, but the shebang still said python2 making it
unlikely to work on systems without python 2.x.
Change it to just 'python' instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The nc -> netcat symlink is not created if nc exists already, e.g.
from busybox.
For netcat itself this is not needed, it is always installed.
Cc: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
It may be necessary if packages become built in parallel, leading to a
race condition on the creation of the "nc" link.
Of course this still leaves a race conditon if other netcat competitors
but we must assume thet the user is a grown-up person who knows what is
doing.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
[Arnout: Don't force-remove the existing nc, not needed according to
Romain.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
https://git.buildroot.net/buildroot/commit/?id=266208972192f1e0869f89d7be941de6294a810a
broke imx support in Kodi because previously the G2D libraries were
part of the imx-gpu-viv package:
CMake Error at /usr/share/cmake-3.7/Modules/FindPackageHandleStandardArgs.cmake:138 (message):
Could NOT find IMX (missing: G2D_LIBRARY)
Adjusting the Kodi package to use the imx-gpu-g2d as well still does
not provide a working build:
/home/buildroot/br4/output/build/kodi-17.6-Krypton/xbmc/linux/imx/IMX.cpp: In member function 'void CIMX::Deinitialize()':
/home/buildroot/br4/output/build/kodi-17.6-Krypton/xbmc/linux/imx/IMX.cpp:79:21: error: 'DCIC_IOC_STOP_VSYNC' was not declared in this scope
ioctl(m_fddcic, DCIC_IOC_STOP_VSYNC, 0);
^~~~~~~~~~~~~~~~~~~
/home/buildroot/br4/output/build/kodi-17.6-Krypton/xbmc/linux/imx/IMX.cpp: In member function 'bool CIMX::UpdateDCIC()':
/home/buildroot/br4/output/build/kodi-17.6-Krypton/xbmc/linux/imx/IMX.cpp:109:19: error: 'DCIC_IOC_STOP_VSYNC' was not declared in this scope
ioctl(m_fddcic, DCIC_IOC_STOP_VSYNC, 0);
^~~~~~~~~~~~~~~~~~~
/home/buildroot/br4/output/build/kodi-17.6-Krypton/xbmc/linux/imx/IMX.cpp:115:21: error: 'DCIC_IOC_START_VSYNC' was not declared in this scope
ioctl(m_fddcic, DCIC_IOC_START_VSYNC, 0);
^~~~~~~~~~~~~~~~~~~~
/home/buildroot/br4/output/build/kodi-17.6-Krypton/xbmc/linux/imx/IMX.cpp: In member function 'virtual void CIMX::Process()':
/home/buildroot/br4/output/build/kodi-17.6-Krypton/xbmc/linux/imx/IMX.cpp:125:19: error: 'DCIC_IOC_START_VSYNC' was not declared in this scope
ioctl(m_fddcic, DCIC_IOC_START_VSYNC, 0);
^~~~~~~~~~~~~~~~~~~~
/home/buildroot/br4/output/build/kodi-17.6-Krypton/xbmc/linux/imx/IMX.cpp:131:19: error: 'DCIC_IOC_STOP_VSYNC' was not declared in this scope
ioctl(m_fddcic, DCIC_IOC_STOP_VSYNC, 0);
^~~~~~~~~~~~~~~~~~~
Although it might be possible to fix these bugs with something like
#define DCIC_IOC_CONFIG_DCIC _IO('D', 12)
#define DCIC_IOC_START_VSYNC _IO('D', 15)
#define DCIC_IOC_STOP_VSYNC _IO('D', 16)
as done in
https://raw.githubusercontent.com/LibreELEC/LibreELEC.tv/libreelec-7.0/projects/imx6/patches/kodi/imx6-jarvis.patch
we would still try to ride a dead horse. The upcoming Kodi version
18.0-Leia will remove imx support completely, see upstream PR 12990.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
[Thomas: keep an explicit -DENABLE_IMX=OFF in CONF_OPTS.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
According to imx-vpu-5.4.37/Makefile, line 6:
INCLUDE_LIST:= IMX27ADS IMX51 IMX53 IMX6Q
imx6s is not supported by the imx-vpu package. Its install target,
guarded by
ifeq ($(PLATFORM), $(findstring $(PLATFORM), $(INCLUDE_LIST)))
does nothing, causing a build error later on in the imx-vpuwrap package
checking for vpu_lib.h... no
configure: error: lib_vpu is required, consider installing imx-lib
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
check-package would flag tabs before a backslash ('\t\\'),
two spaces before a backslash (' \\') but would not flag a tab before space
before backslash ('\t \\'), allowing someone to bypass the check.
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since custom dts files are unconditionally handled *KERNEL_USE_CUSTOM_DTS
is no longer available/needed.
Signed-off-by: Rafal Susz <rafal.susz@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Custom dts files are still conditionally copied based on non existing
boolean. So it is currently not possible to use custom dts file(s) at all.
List of dts files is now iterated and files are copied into dedicated kernel arch dir.
Signed-off-by: Rafal Susz <rafal.susz@gmail.com>
Tested-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When imake is installed on the host, it tries to include
freetype headers from host, so we must override ac_cv_path_IMAKE
to avoid this.
Extract from config.log:
configure:14803: checking if we should use imake to help
configure:14820: result: yes
configure:14829: checking for xmkmf
configure:14846: found /usr/bin/xmkmf
configure:14857: result: /usr/bin/xmkmf
configure:14920: testing Using /usr/bin/xmkmf ...
configure:15015: testing IMAKE_CFLAGS -I. -I/usr/include/freetype2
Signed-off-by: Valentin Korenblit <valentin.korenblit@smile.fr>
[Thomas: pass ac_cv_path_IMAKE="" as suggested by Romain Naour.]
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
host-meson is used by some packages such as libmpdclient.
If selinuxenabled is installed on host but restorecon is unavailable
(for an "unknwown" reason), install will crash.
Fixes:
- http://autobuild.buildroot.net/results/d5dcdfdfab3503fdc387f99e68267972a38c417d
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libbsd builds now almost fine with a musl or uClibc toolchain, except
for one issue introduced in the latest version bump. Upstream commit
22fbd62368c39de8ac5e249d1502d5ac0ffdef30 [1] uses the glibc-only macro
`__GLIBC_PREREQ`. The issue is fixed by the attached patch from upstream,
which fixes the use of `__GLIBC_PREREQ` on non-glibc toolchains.
Backported from:
https://cgit.freedesktop.org/libbsd/patch/?id=1f8a3f7bccfc84b195218ad0086ebd57049c3490
netcat-openbsd is the only package selecting libbsd. However, building
it still needs a glibc toolchain, as it uses `b64_ntop` which is not
available in musl or uClibc.
Build has been successfully tested with:
* armv7-eabihf--glibc--bleeding-edge-2017.11-1
* armv7-eabihf--musl--bleeding-edge-2018.02-1
* armv7-eabihf--uclibc--bleeding-edge-2018.02-1
[1] https://cgit.freedesktop.org/libbsd/commit/?id=22fbd62368c39de8ac5e249d1502d5ac0ffdef30
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a test to check Python code style in the whole buildroot tree.
Search files by type in order to help flake8 to find the Python scripts
without .py extension. But don't rely only in the output of 'file' as it
uses heuristics and sometimes it is wrong (specially identifying Python
files as C++ source for the 'file' version currently in the Docker
image).
Include in the output:
- the list of Python files processed;
- statistics for each kind of warning;
- the total number of warnings;
- the number of Python files processed.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump the docker image to the latest tag to have flake8 pre-installed.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Even if --enable-static --disable-shared is passed, wine tries to
build a shared library, causing a build failure in a BR2_STATIC_LIBS=y
configuration:
/home/test/buildroot/output/host/i686-buildroot-linux-uclibc/sysroot/usr/lib/libc.a(__uClibc_main.os): In function `__uClibc_fini':
__uClibc_main.c:(.text.__uClibc_fini+0x10): undefined reference to `__fini_array_start'
/home/test/buildroot/output/host/lib/gcc/i686-buildroot-linux-uclibc/6.4.0/../../../../i686-buildroot-linux-uclibc/bin/ld: /home/test/buildroot/output/host/i686-buildroot-linux-uclibc/sysroot/usr/lib/libc.a(__uClibc_main.os): relocation R_386_GOTOFF again
st undefined hidden symbol `__fini_array_start' can not be used when making a shared object
/home/test/buildroot/output/host/lib/gcc/i686-buildroot-linux-uclibc/6.4.0/../../../../i686-buildroot-linux-uclibc/bin/ld: final link failed: Bad value
collect2: error: ld returned 1 exit status
make[2]: *** [libwine.so.1.0] Error 1
make[2]: Leaving directory `/home/test/buildroot/output/build/wine-3.0/libs/wine'
make[1]: *** [libs/wine] Error 2
Since using wine in a static linking environment is fairly unlikely,
we simply mark the wine package unavailable on static-only
configurations.
Since we need to add a Config.in comment, we also introduced a
BR2_PACKAGE_WINE_ARCH_SUPPORTS hidden boolean, to share the
architecture dependencies definition between the wine config option
and the comment.
Signed-off-by: André Hentschel <nerv@dawncrow.de>
[Thomas:
- add a comment in the Config.in file about the dependency
- add BR2_PACKAGE_WINE_ARCH_SUPPORTS
- extend the commit log]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, if the user specifies the path to an existing directory as
the path to the custom (def)config file (FOO_KCONFIG_FILE), then we
happily create a file in there, either 'defconfig' or '.config' (or
whatever the .config is named for that package), depending on whether
we're saving a defconfig or a full config.
So, we could save the file, but then the Buildroot defconfig file that
contains that path would no longer be reusable as-is, because we
interpret that path as a path to a file.
Furthermore, if the directory-portion of FOO_KCONFIG_FILE does not
exist yet, the update would fail, because cp does not create missing
directory components.
So we fix that by adding an explicit test for the directory-ness of the
target file, and then an explicit mkdir to create missing directory
components.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When updating back the (def)config file, the touch command is not very
useful by default, so hide it away.
We do not hide away the cp command, as that could confuse the user under
some circunmstances. For example, when the toolchain does not yet exist,
the uClibc buildsystem will complain multiple times about gcc not being
found, like so:
make[2]: /home/ymorin/dev/buildroot/O/host/bin/i686-buildroot-linux-uclibc-gcc: Command not found
(Note that we can not suppress those warnings, as they are on stderr,
and we still want to see stderr in case of real errors).
So, if we were to hide the cp command, the user could be left confused,
even though we were sucessful in updating back the (def)config file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Except for the nice human-friendly reminder of the command that the user
was just running, and the name of the file to copy from, those two rules
are exactly the same.
Make that a common macro that is shared, so that it's easier to add more
checks, and to simplify maintenance.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This was present in Yann's original patch, but got dropped when I rebased
commit 7e9870ce32 (core: introduce intermediate BASE_TARGET_DIR variable) to
fix the Makefile conflicts.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to how we do for openssl.
host-luainterpreter is only used by the luarocks infrastructure, and there
is afaik no specific reason why the host lua variant must match the target one.
Luajit only supports a limited number of architectures, so building it for
the host limits the architectures Buildroot can be used on (E.G. powerpc64
autobuilders).
To fix this, always use host-lua. Slightly rework lua.mk to ensure
host-lua-5.1 is used when luajit is selected, and drop the logic for using
host-luajit.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes#10776
The upstream git repo contains a number of fixes for building against newer
kernel versions, so bump the version.
git shortlog eb66d40310c93dc82bc8eac889744c1ed1f01f7b..
Alain Kalker (2):
uprobe: Print the symbol, not the matching pattern
uprobe: Blacklist uretprobes on _start
Aleksa Sarai (2):
runtime: update GFP_WAIT to GFP_RECLAIM
userspace: fix up argument parsing NULL dereference
Alexey Makhalov (1):
Fix building for v4.8 kernel
Azat Khuzhin (12):
Use get_unused_fd_flags(0) instead of get_unused_fd()
Support trace_seq::seq
Ignore separate debug files (*.dwo)
Use trace_seq_has_overflowed()
makefile: split vim plugins installing into separate target
makefile: use DESTDIR for install (allow to change install dir)
makefile: install: create dirs
makefile: use ldflags for linking ktap
makefile: add CPPFLAGS to KTAPC_CFLAGS, to allow change default flags
ignore: exclude /debian
Support compilation for 4.2 (ftrace_events cleanup)
runtime: fix building on 4.3
Jovi Zhangwei (11):
Merge pull request #84 from azat/linux-3.19-fixes-v3
Merge pull request #85 from azat/debian-preparations-v2
Merge pull request #88 from NanXiao/master
Merge pull request #89 from NanXiao/patch-1
Merge pull request #91 from NanXiao/patch-1
Merge pull request #90 from azat/linux-4.2-compilation-fixes
Merge pull request #99 from cyphar/fix-null-deref
Merge pull request #98 from cyphar/fix-gfp-reclaim
Merge pull request #97 from azat/fix-building-4.3-__GFP_RECLAIM
Merge pull request #103 from ackalker/blacklist
Merge pull request #104 from YustasSwamp/master
Nan Xiao (3):
Update tutorial.md
Update Makefile
Fix memory leak issue in main function.
WEI ZHANG (1):
ktap: Change the copyright to Huawei Technologies
While we are at it, also add a hash for the license file.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Each of the intermediate, per-rootfs target directories, as well as the
intermediate tarball, can take quite some place, and is mostly a
duplication of what's already in target/. The only delta, if any, would
be the tweaks made by the filesystem image generations, but those tweaks
are most probably only meaningful when seen as root.
We normally do not remove intermediate files, but those can be quite
large, and are not directly usable by, nor accessible to the user.
So, get rid of them once the filesystem has been generated.
This does not need to be done in fakeroot.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that the pre-fs ones are run on a transient copy of target/, the
post-fs hooks are no longer needed because we no longer need to restore
the target/ directory as it is only a internal copy.
Remove support for the post-fs hooks, and update the sole package using
them.
We do not add a legacy check because this was mostly a purely-internal
detail that was never really exposed nor documented.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, some packages may register hooks to be run just before and
just after the generic tarball image is generated, because they need to
prepare the filesystem for read-only or read-write operation.
However, this means that, if any of the hooks or the image generation
fails, the target directory is left in a dangling, inconsistent state.
We fix that by doing a copy of target/, run the hooks on that copy,
generate the generic tarball image out of that, and get rid of the copy.
This way, we can guarantee consistency of the target directory, and we
can even ditch support for post-fs hooks (those that restore target/).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, some filesystems may want to tweak the content of the target
directory, create special device nodes etc... This all means that:
- the content of the target directory for a specific filesystems may
depend on whether another filesystem is enabled or not; for example,
cpio will create a /init script or symlink and a /dev/console node;
- the filesystems can not be built in parallel, because they may change
the content of the target directory while another is being assembled.
Furthermore, the same fakeroot script is executed over-and-over-again
for each filesystem, to create the device nodes, the users and their
homes and files, and setting permissions...
We introduce an intermediate tarball, for which we do the full fakeroot
shebang.
That tarball then serves as the base for the other filesystems, with a
very simple fakeroot script that untars the common tarball, and calls
the actual filesystem image generator on that.
Note that we use a very simple tar command to generate the intermediate
tarball, because we are not concerned with reproducibility of the
archive itself (only of the archived files).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Before we can create an intermediate tarball for all filesystems, we
nedd to move the common dependencies needed to generate that
intermediate tarball, rather than leave those dependencies to each
filesystem.
So, we introduce rootfs-common, which gathers all those common
dependencies.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
... which for now still points to the base target directory, but this is
a step forward.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
