We already default to 7.6 for all architectures (except AVR32, ARC and
Microblaze that have their specific versions), and we have added 7.7
recently.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Those gcc series are old and are not used as the default versions for
any of the architectures we support, so this commit gets rid of them.
The gcc 4.3.x series technically remains used by the LPC32xx
defconfigs we have:
configs/ea3250_defconfig:BR2_GCC_VERSION_4_3_X=y
configs/fdi3250_defconfig:BR2_GCC_VERSION_4_3_X=y
configs/phy3250_defconfig:BR2_GCC_VERSION_4_3_X=y
Back when those defconfigs were introduced, gcc 4.3 was chosen because
it was the only one capable of building a fully working kernel for
those ARM-based platforms. However, the original submitter, Alexandre
Belloni, no longer has access to the hardware platforms, so he is
unable to test if newer gcc versions have fixed the problem. It
certainly doesn't make sense to keep gcc 4.3.x just for those three
boards, so we'll wait for someone actually using those defconfigs to
complain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The BR2_UCLIBC_ARM_TYPE was only used for uClibc 0.9.32 on ARM. Now
that only uClibc 0.9.33 is supported for ARM, there is no point in
keeping BR2_UCLIBC_ARM_TYPE, since the corresponding uClibc options no
longer exist.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit removes all remaining references to uClibc 0.9.32.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit removes the 0.9.32.1 version of uClibc, which is very old,
and does not bring any specific advantage over 0.9.33, which has been
around for more than two years now.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- The 2.20.x series is old, it no longer makes sense to support it.
- In the 2.21.x series, we still have 2.21.1, so keeping 2.21 doesn't
make much sense, so this patch removes it.
- Similarly for the 2.23.x series, having both 2.23.1 and 2.23.2
doesn't make much sense, so this patch removes 2.23.1 and keeps
2.23.2.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Tested toolchain compiles with binutils 2.22 and 2.24.
Result tested in Qemu 2.0.0. (only little endian version
tested)
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that there's a twolame package we can add support for it in mpd.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The 2014R1 toolchain is provided in two flavours by Analog Devices:
one based on gcc 4.3.x, which is considered stable, and one based on
gcc 4.5.x, considered experimental. In commit
5a65b8e185 ("toolchain-external: add ADI
Blackfin 2014R1 toolchain, remove 2012R1") both variants were added.
However, after some testing in the autobuilders, and discussion with
the Analog Devices folks, it turns out that the experimental version
of the toolchain is too experimental. It causes numerous build
failures, and the Analog Devices folks clearly say that it's an early
release and that they expect quite a few problems to show up.
Therefore, this commit removes the experimental flavor and keeps only
the stable variant. Note that the removal/renaming of the Config.in
options is not a problem, since those options were added after the
2014.05 release.
Fixes:
http://autobuild.buildroot.org/results/2a9/2a9d9c332a206fdb46bc8ba022c74d23082a6312/http://autobuild.buildroot.org/results/e1c/e1ce0c1cdd0139208dddaa8f2441ab0e3ab2385e/http://autobuild.buildroot.org/results/993/993aca3f4719afaa4b37524f9136fb8cdc53a066/
and more.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ccrypt is a utility for encrypting and decrypting files and streams.
Signed-off-by: David Bachelart <david.bachelart@bbright.com>
Reviewed-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Quite some work has been done from 0.8.3 to 1.0.1, and as a result
this commit is very intrusive. The biggest change is the move to an
autotools package.
Then, the options that enable utilities individually have been deprecated
and moved to Config.in.legacy. Instead, we introduce new option to select
either all the utilities. This change loses granularity in favor of
maintainability.
[Peter: needs host-pkgconf. Select and use argp-standalone on uClibc]
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is no longer needed now that e244eb12d (xserver_xorg-server: Fix race
condition when installing man pages) has been reverted.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With the recent change to the init script the default /etc/default/ntpd file
doesn't do anything, so don't install it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add ntp.conf file to make ntpd syncing.
Starting ntpd daemon with -g to sync time also with big offsets.
Removes the use of deprecated ntpdate command for initial time sync.
[Peter: drop unused NTPDATE_BIN variable]
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In order for this comment to be properly displayed, it must be moved to be
at the end of the file.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As reported by Sagaert Johan in the mailing list mpd 0.18.x fails to
build with gcc 4.9.x
Patch status: sent upstream.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit mainly fixes bug #7268 by improving the isolation of
the build environment by making sure some host environment header
paths do not leak into the target build. The investigation was done by
David <buildroot-2014@inbox.com>. This is done by not calling the
add_multiarch_paths() function of setup.py when we're cross-compiling,
a change made in the newly introduced
python3-012-dont-add-multiarch-path.patch.
In addition to this, another patch is added to make sure the build is
aborted when one of the Python module fails to build. This is done in
python3-013-abort-on-failed-modules.patch. Without this, the Python
setup.py script simply logs which module failed to build, but doesn't
abort, so it's hard to notice when there is a problem.
[Peter: slightly reword commit message]
Cc: David <buildroot-2014@inbox.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit mainly fixes bug #7268 by improving the isolation of
the build environment by making sure some host environment header
paths do not leak into the target build. The investigation was done by
David <buildroot-2014@inbox.com>. This is done by not calling the
add_multiarch_paths() function of setup.py when we're cross-compiling,
a change made in the newly introduced
python-013-dont-add-multiarch-path.patch.
In addition to this, another patch is added to make sure the build is
aborted when one of the Python module fails to build. This is done in
python-014-abort-on-failed-modules.patch. Without this, the Python
setup.py script simply logs which module failed to build, but doesn't
abort, so it's hard to notice when there is a problem.
[Peter: slightly reword commit message]
Cc: David <buildroot-2014@inbox.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: also add README to _LICENSE_FILES]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit makes dvb-apps behave properly in a static-only build. It
passes the static=1 variable to the Makefile, and adds a patch that
fixes the Makefile to not build .so libraries when static=1.
Fixes:
http://autobuild.buildroot.org/results/3db/3dbfa7b692d4b123b3ba6b55c84df12818273554/
[Peter: drop V=1 as pointed out by Yann]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When switching the git helper over to a shell script, a special case was
not carried over: in case the remote has the required reference, we
attempt a shallow clone, using --depth 1. However, this is not supported
when the remote is accessed with the http protocol.
Therefore, the download fails.
What happened before the conversion to a shell script was that the helper
in the Makefile would fallback to doing a full-clone.
This is the case and behaviour that were lost in the conversion.
To avoid making the script too complex, we only attempt a full clone if
needed. And we decide that a full clone is needed by default; we decide
it is unnecessary if the remote has the needed reference *and* the
shallow clone was successful.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch legal-info generation dependency to patch rather than extract
so we can use debian/copyright from debian-maintained packages,
because the *orig* file alone doesn't contain the appropiate file.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
librtlsdr is a library and software for using a Realtek RTL2832U based
DVB-T dongle as a cheap SDR.
[Thomas: change license to GPLv2+, reword help text for the detach
driver option.]
Signed-off-by: Jason Pruitt <jrspruitt@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Disable the phar command-line tool since it requires php to pack itself
up. Fixes build failure for CLI (or CLI+CGI) variants of php.
Hardly useful for embedded scenarios.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add the _ntp user that the daemon requires to work in any way.
Add a SysV-style initscript as well, but not with '-s' (set time
immediately after startup) because it can make the boot process stall
for a few seconds if there's no proper network connectivity/dns setup.
Make ntp and openntpd mutually exclusive since they overstep each other.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds support for the TS-5x00 serie of Technologic Systems
x86-based Single Board Computers, featuring an AMD Elan520 processor.
http://wiki.embeddedarm.com/wiki/#AMD
[Peter: explicitly set arch/variant in defconfig, strip trailing spaces]
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A few minor updates on the patches were needed to resolve some
conflicts on the main Makefile.pre.in file, in the list of modules to
build/install.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
