Following the switch to uClibc-ng as the default library, uClibc-ng
was also used as the default on ARC, while we actually want to use the
ARC specific version by default on this architecture.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Even though this is only RC1 it's been heavily used internally so it should
not be any worse than existing arc-2014.12.
Moreover this relase (and so its RC1) finally delivers support of NPTL
for ARC in uClibc.
That's why it would be good to allow interested users to start trying it
(for example WebKit and apps that use WebKit could be successfully built
and run) also it will be helpful to run that new toolchain through
autobuilder in attempt to find any hidden regressions so we have a solid
toolchain for release.
If there's an interest in that patch more patches will follow with
subsequent RCs and essentially on appearence or relese Buildroot will be
updated with it.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: arc-buildroot@synopsys.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
check_arm_abi builds a test C file to check that the toolchain is
working correctly, with the output redirected to /dev/null.
However, some toolchains (OSELAS 2014.12.0, for instance) foolishly
append ".gdb" to the output filename for an intermediate file, causing
an attempt to write to /dev/null.gdb, which obviously fails.
Fix this by adding changing the output to a temporary file, which is
later removed along with any other "suffixed" files.
Suggested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add the Cortex M3 variant. These microcontrollers don't support regular
ARM instructions and don't have an MMU.
Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A very interesting use-case for a kconfig-based package is to create a
custom (def)config file based on one bundled with the package itself,
like described in PR-8156:
make menuconfig
-> enable kernel, use an in-tree defconfig, save and exit
make linux-menuconfig
-> enable/disable whatever option, save and exit
make menuconfig
-> change to use a custom defconfig file, set a path, save and exit
make linux-update-config
-> should save to the new custom defconfig file
However, that is currently not possible, because the dependency chain
when saving the configuration goes back up to the (newly-set!) custom
(def)config file, which does not exist.
So, we break the dependency chain so that saving the configuration does
not depend on that file. Instead, we use a terminal rule that checks
that the configuration has indeed been done, and fails if not.
Closes#8156.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
After we exit the configurators, we need to re-run the kconfig fixups to
ensure the user is not able to override them in the configurators.
Currently, we schedule that "for later", by removing the corresponding
stamp file, so make will run the fixups "later".
This means the user has access to the un-fixed .config file, which he
might decide to copy and use as a reference (not too bad, since we'd run
the fixups anyway; but not clean either).
Note that we still remove the stamp file before running the fixups, in
case any one of those fixups breaks, so we don't want to believe the
fixups have been applied; the fixup macro will touch that file anyway.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The same fixups will have to be done after leaving the configurators,
so we want to commonalise that code.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Even though we do have a dependency chain back to each of the kconfig
base and fragment files:
$$($(2)_DIR)/.config: $$($(2)_KCONFIG_FILE) $$($(2)_KCONFIG_FRAGMENT_FILES)
we can't rely on it to ensure they are all present, because they all have
this rule:
$$($(2)_KCONFIG_FILE) $$($(2)_KCONFIG_FRAGMENT_FILES): | $(1)-patch
but since this rule has no prerequisite (only build-order, but that does
not count in this case) and no recipe, make will believe each missing
file to be a PHONY target, and will always run targets that depend on
it:
https://www.gnu.org/software/make/manual/make.html#Force-Targets
So, that means a missing kconfig base or fragment file would always
cause the rule to generate .config to be run at each invocation, which
in turn would cause a rebuild of the kernel, which is clearly not what
we want.
Since this is expected make behaviour, we can well end up with a missing
Kconfig base or fragment. To avoid continuously rebuilding the kernel in
that case, we must check those files exist by ourselves, and error out
if any one of them is missing.
One would expect we check for them right in their dependency rule, like
so:
$$($(2)_KCONFIG_FILE) $$($(2)_KCONFIG_FRAGMENT_FILES): | $(1)-patch
[ -f $(@) ] || {echo Missing $(@) >&2; exit 1; }
but that does not work, as only the first target is tested for. That
check msut be turned into a loop explicitly testing all files, like so:
$$($(2)_KCONFIG_FILE) $$($(2)_KCONFIG_FRAGMENT_FILES): | $(1)-patch
for f in $$($(2)_KCONFIG_FILE) $$($(2)_KCONFIG_FRAGMENT_FILES); do \
[ -f $(@) ] || {echo Missing $$$${f} >&2; exit 1; }; \
done
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Floris Bos <bos@je-eigen-domein.nl>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Kconfig fragments may be present in the package, so we need to extract
and patch it before we can use the fragments.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Floris Bos <bos@je-eigen-domein.nl>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Martin Bark <martin@barkynet.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Drop 110-pr64896.patch and 920-libgcc-remove-unistd-header.patch since
they're upstream.
Tweak 850-libstdcxx-uclibc-c99.patch for this new release.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Although no package seems to link against vlc libraries right now, these
libraries will be necessary for upcoming new efl emotion-generic-players
package.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Acked-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add libarchive hash. Enable lzma support.
Both xz and lzma support are provided by the xz library.
[Thomas: explicitly pass --with-lzma when xz is available.]
Signed-off-by: Nimai Mahajan <nimaim@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Note that this situation is not ideal because it only add openmp support
to the Buildroot toolchain, not the external ones; but a couple of
packages already are in this situation.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
opencv_python module needs python-numpy because it uses some numpy
headers in this wrapper.
>From its 2.4 release, OpenCV offers python bindings, but they required
most of the OpenCV modules to be enabled.
Since OpenCV-3.0.0, python bindings have been reworked:
- it now supports both python2 and python3
- only built modules supporting wrapped in python will be included in
the bindings.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This change allows to reduce the size of the default OpenCV package, so
the final root filesystem.
However, this will break any existing defconfig enabling OpenCV. Indeed,
a minimal OpenCV package will be built, whereas, prior to applying this
patches, a full-featured one would have been built instead.
Cc: "Yann E. Morin" <yann.morin.1998@free.fr>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since its integration into Buildroot, OpenCV always enables all modules
by default because the inter-module denpedency were not supported.
Now that OpenCV inter-module dependencies are correctly set at the
Buildroot configuration level, it is possible to reduce the enabled
module list to its minimal set, letting kconfig enable the other
modules.
This change will not change anything WRT a defconfig build with opencv.
Cc: "Yann E. Morin" <yann.morin.1998@free.fr>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch is mostly cosmetic changes improving the human interface.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
OpenCV allows to enable/disable the selection of modules (a.k.a.
opencv libraries). These modules depend one on the others; these
dependencies are already handled by the build-system (CMake).
However, the way we handled them in Buildroot was not really clean.
For each opencv module, there is a kconfig option, but we forced the
corresponding CMake config option without checking for the modules'
dependencies.
This patch replicates the modules' dependency relations in the
Config.in, so that the selection of the user will actually be built.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The opencv plugin uses stuff from the now removed opencv's legacy module.
Note that the configure script already correctly check the opencv version
and disable the opencv plugin with opencv-3.x.
Also remove 'select ...' to prevent kconfig from complaining about
recursive dependencies.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This major version bump is in fact a bump from 2.4.10 to 2.4.11, then to
3.0.
OpenCV-2.4.11 improves a lot the Buildroot integration, including a
couple of patches that are no longer needed:
- x86 PIC code compilation fix in core module [1];
- return type fix in superes module [2];
- opencv.pc generation [3].
It also improves the gstreamer-0.10/1.x detection [4], that will be
needed in a follow-up patch.
OpenCV-3.0 still requires 2 patches (backported from upstream fixing
pthread support [5,6].
The OpenCV-3.0 does some major changes, for which a transition guide
has been published [7].
Among these changes coming with OpenCV-3.0, some new modules have been
introduced and others got removed; leading to a bunch of configure
option updates (to keep as much as possible an iso-functional-perimeter)
and the legacy menu has been updated too.
The worth noticing removals being:
- the opencv_legacy and opencv_nonfree modules no longer exist;
- the opencv_contrib module has moved out of the opencv base tree and
now has its own repository [8].
There is currently no plan to support it.
Some 3rd-party supports have been improved or added; their integrations
in Buildroot will be addressed in follow-up patches.
[1] ea50be0529
[2] 2e393ab833
[3] eceada586b
[4] 38bb0db9db
[5] 1f983ec39c
[6] a482dcce46
[7] http://docs.opencv.org/master/db/dfa/tutorial_transition_guide.html
[8] https://github.com/itseez/opencv_contrib
[Thomas:
- address most contents made by Yann E. Morin on the Config.in file.]
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
No new option added nor removed.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Libucl is a high performance and flexible JSON/YAML/etc. parser for C.
https://github.com/vstakhov/libucl
[Thomas:
- remove hash file, should not be used for github downloads
- rewrap Config.in help text
- remove trailing white space in Config.in.
- add missing host-pkgconf dependency, without which the package
doesn't autoreconf properly.
- fix license: it is BSD-2c, not just BSD.]
Signed-off-by: Nimai Mahajan <nimaim@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Helps drop some patches and hence autoreconf saving time.
Also allows parallel builds.
And fixes:
http://buildroot-busybox.2317881.n4.nabble.com/PATCH-v2-heimdal-explicitly-set-lpthread-td99422.html
without the need to hardcode libraries (disables/withouts weren't enough
though i've added them anyway for correctness).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Change to new homepage since maintainer changed as well.
Add hash file based on tarball signature file.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
These are not used by the busybox or Debian ifupdown implementation. Instead
if-up.d is run after the per-interface up tasks (E.G. post-up) and
if-down.d is run before the per-interface down tasks (E.G. pre-down).
So drop them as they only cause confusion.
grep execute_all output/build/busybox-1.23.2/networking/ifupdown.c
static int execute_all(struct interface_defn_t *ifd, const char *opt)
if (!execute_all(iface, "pre-up")) return 0;
if (!execute_all(iface, "up")) return 0;
if (!execute_all(iface, "down")) return 0;
if (!execute_all(iface, "post-down")) return 0;
grep execute_script output/build/ifupdown-0.7.49/execute.c
int execute_scripts(interface_defn * ifd, execfn * exec, char *opt)
if (!execute_scripts(iface, doit, "pre-up"))
if (!execute_scripts(iface, doit, "up"))
if (!execute_scripts(iface, doit, "down"))
if (!execute_scripts(iface, doit, "post-down"))
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use the Git repository instead of the snapshots,
since they are not generated anymore.
Signed-off-by: David du Colombier <0intro@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove kernel headers check since it now implements local definitions to
keep working with newer versions.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
CMake verbose mode is based on VERBOSE environment variable.
* If VERBOSE is exported but empty, only "Dependee ... is newer than
depender ..." messages are shown.
* If VERBOSE is exported and set (whatever the value), all compilation
commands are shown.
VERBOSE is currently systematically exported by Buildroot, even if it
is empty, in the root Makefile, which implies that the "light" verbose
mode - with "Dependee ... is newer than depender ..." messages - is
always enabled.
VERBOSE should only be exported when V=1, which is the standard way to
enable verbose mode in Buildroot.
Signed-off-by: Cédric Marie <cedric.marie@openmailbox.org>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds a fix for building uClibc 0.9.33.2 and uClibc-ng
1.0.3 with gcc 5.1 on ARM, since we're about to add support for gcc
5.1.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Configure the sudo utility to support PAM if the framework is enabled.
[Peter: use install -D, reword commit message]
Signed-off-by: James Knight <james.knight@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
eglibc is a dead project and has not been making any release since a
while, now that glibc is back and kicking. So let's deprecated our
eglibc support.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Note that both gdb 7.9 and 7.9.1 fail to build in a chroot without
texinfo, due to the infamous makeinfo issue. This should be fixed
separately.
[Peter: fixup white space]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that we have added gcc 5.1, it's time to make gcc 4.9 the default
version used in Buildroot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
