When udhcpc is used on multiple network devices at the same time (or a mix
of dhcp and fixed configuration), /etc/resolv.conf should contain the
union of information from all the interfaces.
Currently that's not the case. The udhcpc script simply overwrites
resolv.conf with the information from the specific interface on each dhcp
bound/renew event.
Fix it by tagging lines with the interface they came from when added,
and drop the affected lines on deconfig/renew. As /etc/resolv.conf is
often a symlink to /tmp (and rootfs might be read only), special care
has to be taken when it is updated.
Notice that I'm not really aware of any official documentation requiring
that '#' comments in /etc/resolv.conf must be supported, but atleast
glibc and uClibc do.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
ifconfig up is a no-op if the device is already running, so let's just
do that unconditionally.
Systems might have multiple network devices, and perhaps run udhcpc on
another interface even when booted over nfs, so don't disable the
per-interface deconfig based on the global nfsroot= setting on the kernel
command line.
If you don't want udhcpc to mess with kernel level IP autoconfiguration
(E.G. for nfs boot), you should instead ensure udhcpc/ifup/ifplugd isn't
started for that interface.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We're currently using two different udhcpc scripts, one in the busybox
package and another in the avahi one, which calls avahi-autoipd on
dhcp failures.
The avahi one actually only does something differently from the default
if avahi-autoipd is available, so let's just always use this one instead
of the complicated logic about writing the file if not present /
overwriting it afterwards.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit bumps the various LTTng components to their latest stable
version: 0.7.7 for liburcu, 1.1.1 for babeltrace, 2.1.3 for libust and
2.1.2 for lttng-modules.
For babeltrace, the patch
lttng-babeltrace-02-fix-build-old-compilers.patch has been removed
because it has been merged upstream as of version 1.1.1. This is also
the reason why the package no longer needs to be autoreconfigured.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Original patch for tinyhttpd disables pthread support from the code
but does not disable it from makefile.
This patch disables pthread support altogether
Fixes:
http://autobuild.buildroot.net/results/2e61a80fcbddd62c76e0406c34ab44d14a4b5c79
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
gvfs can make optional use of libgcrypt so it needs to depend on
it if it is selected. It's also necessary to set the
ac_cv_path_LIBGCRYPT_CONFIG variable to a known value in order
to prevent the AM_PATH_LIBGCRYPT macro from searching the host
paths for the libgcrypt-config script.
Fixes the following build problem when libgcrypt is installed on the
host system but the package is not selected in buildroot:
gvfsbackendafpbrowse.c:31:20: fatal error: gcrypt.h: No such file or directory
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If docbook2pdf is present on the host, the documentation is built, no
matter all the --disable-doc*
But forcing ac_cv_prog_DOCBOOK2PDF to no tells configure that
docbook2pdf is absent, and thus the documentation is not built.
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
gst-omx enables OpenMAX based accelerated video decode.
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
adds libvpx support to gst1-plugins-good
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch adds the gstreamer version 1.x series to buildroot.
[Peter: strip trailing newlines in Config.in]
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The argp bundled dependency which is linked to the libwvutils.so
shared library, wasn't built with -fPIC.
MIPS will refuce to link a non-PIC library with a shared one.
We fix this problem by appending -fPIC to CFLAGS and build all the
shared objects with -fPIC.
[Peter: use +=]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
lxp.doc is a module that provides useful features for working with XML
formats in LOM format as used by the LuaExpat project from Kepler.
[Peter: use fixed git revision, github tarball, install -D]
Signed-off-by: Assaf Inbal <shmuelzon@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libqmi is a glib-based library for talking to WWAN modems and devices which
speak the Qualcomm MSM Interface (QMI) protocol.
Signed-off-by: Patrick Ziegler <patrick.ziegler@fh-kl.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The blkid binary is not any longer installed when libblkid from
util-linux is selected. udev has a builtin blkid command though
and already detects all values that we are interested in. Change
the usbmount script to use the environment variables set by udev
instead of calling blkid directly.
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since version 0.3.0, libconfig has been made optional
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
A patch from Thomas Petazzoni has been upstreamed in sconeserver; bump version
and remove the patch from Buildroot.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Dhcpcd is an RFC2131 compliant DHCP client.
[Peter: needs ipv6, fix whitespace/file header]
Signed-off-by: John Stile <john@stilen.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This package adds base64 encode/decode functionality for Lua
[Peter: fix file header, use TARGET_CONFIGURE_OPTS, drop quotes around paths]
Signed-off-by: Assaf Inbal <shmuelzon@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: move to libraries, fix Config.in, install into STAGING_DIR]
Signed-off-by: Phil Eichinger <phil@zankapfel.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixup iozone's build system to make it somewhat more flexible.
First make our own linux targets for non-AIO toolchains (uClibc) and
non-threading.
And second, just ditch forced largefile support and expect it from
CFLAGS.
Otherwise using the generic target caused issues like:
http://autobuild.buildroot.net/results/19f606f2978dc3c8039b1bccfcc562b4050083c7/
...which is fixed by this.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Also added:
- WEBP file format support
- License information
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fix freetype-config's includedir and libdir since they're expanded from
configure values since bumping to version 2.4.12
Fixes:
http://autobuild.buildroot.net/results/1c7/1c70ce0ff350623cc38baf4b8b61c8a7a8586aba/
...and many others.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Remove 'usb_modeswitch-makefile.patch' because it was merged upstream.
This package contains a dispatcher (wrapper) that can be installed as Tcl
script or as binary without further dependency. If Tcl is selected and the
binary interpreter is installed (BR2_PACKAGE_TCL &&
!BR2_PACKAGE_TCL_SHLIB_ONLY) the dispatcher will be installed as Tcl script
otherwise as binary.
Signed-off-by: Patrick Ziegler <patrick.ziegler@fh-kl.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Remove 'usb_modeswitch_data-fix-parallel-install.patch' because it was merged
upstream.
Remove dependency on Tcl because the dispatcher script has been moved to
usb_modeswitch package.
Signed-off-by: Patrick Ziegler <patrick.ziegler@fh-kl.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
And select/install jquery-ui since it's almost mandatory.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Older gcc versions (< 4.4) don't accept cpp as -Werror / -Wno-error
parameters.
Disable it since it's not yet a default with any version and we don't do
-Werror by default. Fixes:
http://autobuild.buildroot.net/results/977/9779215c4dfb68dc105f27097246a97851b1f6c2/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Remove 'strace-fix-arm-bad-syscall.patch'. This patch had been integrated
in v4.6 (commit: 9bc6340d2) and was later replaced with a generic solution
in v.7 (commit: 2ce12ed31c2).
Strace still cannot handle non-LFS environments, so a modified version of
strace-fix-disabled-largefile-syscalls.patch remains. The 64-bit syscalls
(sys_truncate64, etc.) are references in the sysent structure but the
functinon definitions are commented out becuase of the missing LFS support.
The workaround for the 'forced lfs mode' doesn't seem to be necessary anymore.
Build tested on arm w and w/o LFS support.
[Peter: arc still not supported]
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Pass --disable-strict to avoid having -Werror in CFLAGS.
Having -Werror in CFLAGS can lead to build problems depending
on the gcc version that is being used and it should not be used
in released code.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Upstream changed their distribution tarball site.
Thanks go to Andrew Scheller from bug #6308 for noticing and reporting.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Buildroot uses a normal ARM compiler to build the AM33X CM3 firmware
(which runs on a Cortex-M3 processor), but Buildroot will have a
default -march value that doesn't necessarily match the one needed for
Cortex-M3, leading to build failures (gcc complains that the
-mcpu=cortex-m3 option being passed is not compatible with the
selected -march).
Fix this by explicitly indicating -march=armv7-m.
Fixes:
http://autobuild.buildroot.net/results/db1/db13623b1701bfe678c302e8f88c7473cb2345f9/build-end.log
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Following the libglib2 bump, gvfs must be updated. We don't bump to
the latest 1.17.1, because it requires libglib2 2.37, and we have only
libglib2 2.36.x at this point.
Fixes:
http://autobuild.buildroot.net/results/d02/d026f3e697d60a3730f89acab18515eb568c4d0e/build-end.log
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When libpcap detects that libnl3 is available, it hardcodes the fact
of using -I/usr/include/libnl3, which is completely wrong in
cross-compilation.
This commit fixes that, by removing this hardcoded include path, and
by passing an appropriate -I option from libpcap.mk.
The original issue has been reported upstream at
https://github.com/the-tcpdump-group/libpcap/issues/305.
Fixes:
http://autobuild.buildroot.net/results/b65/b6585bf2985a188e797e5a6b71a35c461421e3b4/build-end.log
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Remove bison-2.6-compat patch as it has been incorporated upstream.
Remove fix build issue with old gtk as gtk has been bumped to a newer
version.
Remove fix-build-with-gcc-4-6 as it has incorporated upstream.
Remove directfb patches due to depreciation
Remove pool patch as it is no longer required
Remove pthread_getattr_np as webkit no longer uses this function.
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* Drop DirectFB support from libgtk2
* bump libgtk2 to version 2.24.18
[Peter: fixup patch whitespace changes]
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch bumps libglib2 to version 2.36.1. In addition this bumps glibmm
and glib-networking to 2.36.1.
Signed-off-by: Spenser Gilliland <spenser at gillilanding.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Remove initial g from hash tag to fix downloads from github.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Updating brings in a new bootloader that enables more free codecs:
MJPEG, VP6, VP8, Ogg Theora and Ogg Vorbis
Also, the command-line definition has moved to its own file, now.
Although the legacy 'cmdline' variable seems to still be supported
for a little while, better switch now than forget when we upgrade
later.
Update the RPi board readme accordingly.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: fix {/( mixup as pointed out by Yann]
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Even though we've got UCLIBC_HAS___PROGNAME=y in our internal toolchains
the build seems to fail under some circumstances.
Since program_invocation_short_name is equally as useful just disable
__progname usage. Fixes:
http://autobuild.buildroot.net/results/cc8/cc861f5a034a0922a90fb6f22835a1fe8205d497/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This reverts commit 7672b1235d.
It turns out that libgnutls.so ends up with a reference to wctomb() on
uClibc, as uClibc doesn't have vasnprintf so gnutls builds its internal
gnulib version of it, referencing wctomb().
Fix it by going back to requiring wchar for the base gnutls library as well.
Fixes http://autobuild.buildroot.net/results/780/780e825e56dc78f1ea347ca462e2e31044428775/
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When BR2_PACKAGE_ARGP_STANDALONE is enabled and built before p11-kit the
configure script detects it and a conflict arises because libc already
includes and defines program_invocation_short_name.
Avoid this by forcing the detection to true otherwise the configure
script tries to use argp-standalone and it clashes with libc. Fixes:
http://autobuild.buildroot.net/results/a39/a39fe81a356b922a891d4225a56ce2427ab5bca7/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
bwm-ng is a networking application, not a system one.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Some packages (kmod, e2fsprogs, ..) contain multiple (different) license
files with the same file name, but in different directories.
These are currently all copied to the same filename in
output/legal-info/licenses/<pkg>, overwriting everything but the last file.
Fix it by recreating the same directory structure under legal-info.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The libkmod is licensed as LGPL, while the kmod tools are GPL.
We always install libkmod, but conditionally install the tools.
This patch adjusts the license variables accordingly.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: license is mix of BSD-2c and BSD-3c]
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
genext2fs is built only if the user selected an ext2 root filesystem.
However, some use-cases can't live with the full target/ dir on the
root filesystem, and requires separate partitions (eg. for /usr).
In this case, the user would not select an ext2 root fs in the
Buildrooot menu, and would only generate a tarball of the rootfs.
This tarball would then be used from a post-image script to build
the actual required FSes.
But then, genext2fs is not built, since the ext2 root FS was not
selected.
As for the other filesystem generators, provide a host variant of
genext2fs (genext2fs is already host-package aware, so only needs
adding a Kconfig entry).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump version to get a few new firmware files for some WiFi adapters.
In the rtl81xx familly, it's hard to differentiate each members: I have
a USB stick that identifies itself as TRL8188CUS, but is handled by the
rtl8192ce driver. So I moved all of rtl81xx firmwares under the same
option to avoid confusion.
It will be the responsibility of the user to eventually get rid of
unwanted firmware files in a post-build script, if needed.
Ditto for rtl87xx.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
There are a buncha fixes that are not available in a release yet.
Needs refreshing our patches.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
