Add support for m68k/coldfire. A gcc patch is required
to avoid gcc ICE.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds the support for gcc 6. This release allows to remove
a large number of our gcc patches, mainly thanks to the Xtensa and
musl related patches being merged upstream.
Patches kept with no changes:
100-uclibc-conf.patch
301-missing-execinfo_h.patch
810-arm-softfloat-libgcc.patch
830-arm_unbreak_armv4t.patch
840-microblaze-enable-dwarf-eh-support.patch
860-cilk-wchar.patch
890-fix-m68k-compile.patch
Patches dropped because they have been merged upstream, or were
already upstream backports:
120-gcc-config.gcc-fix-typo-for-powerpc-e6500-cpu_is_64b.patch (merged)
850-libstdcxx-uclibc-c99.patch (merged in a different form, see
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58393)
870-xtensa-add-mauto-litpools-option.patch (upstream backport)
871-xtensa-reimplement-register-spilling.patch (upstream backport)
872-xtensa-use-unwind-dw2-fde-dip-instead-of-unwind-dw2-.patch (upstream backport)
873-xtensa-fix-_Unwind_GetCFA.patch (upstream backport)
874-xtensa-add-uclinux-support.patch (upstream backport)
900-libitm-fixes-for-musl-support.patch (upstream backport)
901-fixincludes-update-for-musl-support.patch (upstream backport)
902-unwind-fix-for-musl.patch (upstream backport)
903-libstdc++-libgfortran-gthr-workaround-for-musl.patch (upstream backport)
904-musl-libc-config.patch (upstream backport)
905-add-musl-support-to-gcc.patch (upstream backport)
905-add-musl-support-to-gcc.patch (upstream backport)
906-mips-musl-support.patch (upstream backport)
907-x86-musl-support.patch (upstream backport)
908-arm-musl-support.patch (upstream backport)
909-aarch64-musl-support.patch (upstream backport)
Successfully build-time and run-time tested with
qemu_arm_vexpress_defconfig, using gcc 6.x, both in uClibc and musl
configurations.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit f4682cf933, a hash of the patches applied to gcc was created
to make sure that ccache can properly detect when the toolchain has
changed. The patches applied to gcc consist of the buildroot patches in
package/gcc, but also potentially patches in BR2_GLOBAL_PATCH_DIR.
However, the path to the patches in BR2_GLOBAL_PATCH_DIR was corrected
incorrectly, because it misses a /. So instead of:
$(BR2_GLOBAL_PATCH_DIR)/gcc-initial/*.patch
it would look for
$(BR2_GLOBAL_PATCH_DIR)gcc-initial/*.patch
In other words, if BR2_GLOBAL_PATCH_DIR doesn't end with /, the patches
in BR2_GLOBAL_PATCH_DIR are not taken into account in the ccache hash.
To fix, add the missing /
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: He Chunhui <hchunhui@mail.ustc.edu.cn>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
After the commit f67a4f50e2 "gcc: preserve CXXFLAGS_FOR_TARGET"
target CFLAGS are passed to all libraries bundled with gcc. This breaks
libsanitizer on gcc-4.9.x when building with _FILE_OFFSET_BITS=64:
error: size of array ‘assertion_failed__837’ is negative
...
libsanitizer/sanitizer_common/sanitizer_platform_limits_posix.cc:837:1:
note: in expansion of macro ‘CHECK_SIZE_AND_OFFSET’
CHECK_SIZE_AND_OFFSET(dirent, d_ino);
This issue is fixed in the libsanitizer mainline and in gcc-5.x.
There's no issue with gcc-4.8.x and earlier.
Reported-by: Julien CORJON <corjon.j@ecagroup.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Backported from: https://llvm.org/svn/llvm-project/compiler-rt/trunk@220328
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit c44cf2cc97.
Now that xtensa gas don't move literals into .init and .fini this fix is
no longer needed.
See upstream commit
https://sourceware.org/git/?p=binutils-gdb.git;a=commitdiff;h=4111950f363221c4641dc2f33bea61cc94f34906,
which was backported to all supported binutils version, under the name
*-xtensa-fix-.init-.fini-literals-moving.patch.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
[Thomas: add more details in the commit log, as suggested by Yann
E. Morin, and using information provided by Max.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This allows to build a m68k toolchain with uClibc.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 2dcab526a9.
Now that gcc correctly propagates CXXFLAGS_FOR_TARGET for libstdc++
build this is no longer needed.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gcc-4.7.x, gcc-4.8.x and gcc-4.9.x don't propagate CXXFLAGS_FOR_TARGET to
CXXFLAGS for libstdc++ build. As a result libstdc++ is built without
TARGET_CFLAGS and may fail to link with applications using it, see e.g.
http://autobuild.buildroot.net/results/81a3bca5cbcf789c7ce1aa221a6a4154dd7c3917/
Instead of passing TARGET_ABI or TARGET_CFLAGS for libstdc++ in
--enable-cxx-flags parameter backport the patch that fixes propagation
of CXXFLAGS_FOR_TARGET to CXXFLAGS.
This issue is fixed in gcc-5.x
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit updates the gcc musl patches for gcc 4.7, 4.8 and 4.9 so
that the path to the dynamic linker encoded as "program interpreter"
in the generated binaries actually matches the symbolic link installed
by musl when building for mips soft-float.
Indeed, musl installs a symlink called ld-musl-mipsel-sf.so.1, but gcc
currently generates binaries that use /lib/ld-musl-mips.so as program
interpreter.
The fix is simply the one from
https://bitbucket.org/GregorR/musl-cross/commits/825219202365, i.e
adjust MUSL_DYNAMIC_LINKER in our musl gcc patches.
Thanks to these patches:
$ ./host/usr/bin/mipsel-linux-readelf -a ./target/bin/busybox
[...]
[Requesting program interpreter: /lib/ld-musl-mipsel-sf.so.1]
[...]
gcc 5.x doesn't need any fix because the musl patches already use the
right value.
Fixes bug #7562.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We have removed gcc 4.5 support since a long time, so this commit
removes dead code that was only used when building a toolchain based
on gcc 4.5.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It's been deprecated for some time now.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
[Thomas: move option to Config.in.legacy, as noticed by Peter.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We're already using 4.9.x as default, and have 4.8.x on the lower side
together with 5.x (5.3.0) on the higher side.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add the Cortex A17 variant. This core is considered a replacement
of the Cortex A12 and is supported by gcc 5 / binutils 2.25+
Suggested-by: Ross Green <greenfross@netscape.net>
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This change introduces newer ARC toolchain in Buildroot.
That new arc-2015.12 release doesn't bring any significant changes
but mostly is focused on fixes and minor improvements here and there.
Most noticeable changes are:
* GCC: Source update to v4.8.5
* GDB: Updated to upstream 7.10 release.
You may find more info on fixes and improvements in that release at:
https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/releases/tag/arc-2015.12
Signed-off-by: Lada Trimasova <ltrimas@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
These patches solve several problems that were discovered
after bumping tools to arc-2015.12-rc1.
The fixes were done in development tree arc-4.8-dev and will be
a part of the next release of ARC GNU tools.
Once that new release happens these patches must be removed.
Signed-off-by: Lada Trimasova <ltrimas@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This change introduces newer ARC toolchain in Buildroot.
Note this is the first release candidate and we'll probably see another
RC before cutting the final release.
That new arc-2015.12 release doesn't bring any significant changes but
mostly is focused on fixes and minor improvements here and there.
Most noticeable changes are:
* GCC updated to v4.8.5
* GDB updated to 7.10
You may find more info on fixes and improvements in that release at:
https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/releases/tag/arc-2015.12-rc1
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: arc-buildroot@synopsys.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
201-libgcc-remove-unistd-header.patch is upstream so remove it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
See https://gcc.gnu.org/gcc-5/changes.html
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch fixes compiler error during libbroadvoice build.
The comparison arguments where not correctly handled.
The fix is done in development tree:
b4035128ba
and will be a part of the next release of ARC GNU tools.
Once that new release happens this patch must be removed.
Fixes:
http://autobuild.buildroot.net/results/bea/beace68a19382b43370c798dcf7d2ef412f9d75e/
Signed-off-by: Lada Trimasova <ltrimas@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Anton Kolesov <akolesov@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The explanations given in the commit log of 7d6c79 (Compile static
versions of gcc libraries) do not explain why we have to provide custom
configure commands, instead of just adding --enable-static to the
configure options.
Add a comment in the code that explains why that is so. Add a pointer to
the ML archives with the explanations, too.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Jérôme Pouiller <jezz@sysmic.org>
Acked-by: Jérôme Pouiller <jezz@sysmic.org>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Building with -mtune=e6500 led to build failures in glibc (probably in
uclibc as well) because gcc was built for a 32-bit target even though
the target tuple is powerpc64-*. This lead to a mix of 32-bit and
64-bit support and build errors like:
fatal error: gnu/lib-names-32.h: No such file or directory
The root cause is that the configure script is not handling e6500
correctly, because of stupid typo in the condition.
Change has been submitted upstream.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Alvaro Gamez <alvaro.gamez@hazent.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Doing a symlink results in incorrect behavior:
$ x86_64-buildroot-linux-gnux32-cc
--version
ccache: error: execv of [...]/x86_64-buildroot-linux-gnux32-cc.br_real.br_real failed: No such file or directory
$ x86_64-buildroot-linux-gnux32-gcc --version
x86_64-buildroot-linux-gnux32-gcc.br_real (Buildroot 2015.11-git-00965-g8d89653-dirty) 5.2.0
Copyright (C) 2015 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Note the double .br_real on the invocation by toolchain-wrapper.
[Thomas: use 'ln -f' instead of 'cp -l', as suggested by Arnout.]
Signed-off-by: Steven Noonan <steven@uplinklabs.net>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As reported by Steven Noonan, the variable recently introduced in the
package infrastructure to exclude certain parts of an archive from
being extracted is <pkg>_EXCLUDES, not <pkg>_TAR_EXCLUDES. However,
the gcc code was incorrectly using <pkg>_TAR_EXCLUDES. This commit
fixes that.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reported-by: Steven Noonan <steven@uplinklabs.net>
Now that we are always explicitly passing gcc_cv_libc_provides_ssp,
there is no longer any reason to modify the gcc configure/configure.ac
to take into account the musl case. When a musl toolchain is being
built, BR2_TOOLCHAIN_HAS_SSP is always 'y', and therefore
gcc_cv_libc_provides_ssp=yes is always passed when building
gcc-initial and gcc-final.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
During the gcc-initial build, we already pass
gcc_cv_libc_provides_ssp=yes explicitly when SSP support will be
available in the C library: at this point in time the C library is not
yet built, so gcc cannot detect if it will support SSP or not.
However, it turns out that there are some situations for which it is
also useful to tell gcc explicitly whether the SSP support is
available or not: the gcc logic to decide whether uClibc has SSP
support or not is broken since uClibc-ng bumped the glibc version it
pretends to be.
So, this commit makes sure that we explicitly pass
gcc_cv_libc_provides_ssp both to gcc-initial and gcc-final, and that
we're always passing either 'yes' or 'no'.
Fixes:
http://autobuild.buildroot.org/results/778/778e6309ba834cc70f8243a4f6c664c0bcaeb7c5/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If an externally built (non-Buildroot) toolchain also wraps the toolchain
executables, there is a risk that it will also use the '.real' extension.
To minimise this risk, use a more buildroot-specific extension instead:
'.br_real', so we can detect that the external toolchain is built using
Buildroot and get to the raw toolchain binaries.
[Peter: reword description]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Disable libsanitizer for sparc64, too. Same problem as for
sparc, see https://bugs.busybox.net/show_bug.cgi?id=7951
Reported-By: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Add support for mips32r6 and mips64r6 target architecture variants
- Disable unsupported gcc versions
- Disable unsupported binutils versions
- Disable unsupported external toolchains
- Disable unsuported C libraries
- Add a hook in order to make glibc compile for MIPS R6.
[Thomas: slightly tweak the glibc hack explanation, to make it
hopefully clearer.]
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
$(wildcard ...) in make doesn't sort the files, so the order of the
hashed files is not predictable. Therefore, the ccache hash could
change from one build to another. We don't want that, so sort the
files explicitly.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With support from assembler this option allows compiling huge functions,
where single literal pool at the beginning of a function may not be
reachable by L32R instructions at its end.
Currently assembler --auto-litpools option cannot deal with literals
used from multiple locations separated by more than 256 KBytes of code.
Don't turn constants into literals, instead use MOVI instruction to load
them into registers and let the assembler turn them into literals as
necessary.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
One of the gcc configure options that we hash for ccache is
--with-pkgversion which is set to something like Buildroot
2015.11-git-00426-ge7e7e4f - i.e., it will change with every buildroot
commit. That's obviously not wanted, so substitute this away.
Also add a \n to the printf so the output is a bit more readable.
[Peter: update documentation to match]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When building in a different output directory than the original build,
there will currently be a lot of ccache misses because in many cases
there is some -I/... absolute path in the compilation. Ccache has an
option CCACHE_BASEDIR to substitute absolute paths with relative paths,
so they wil be the same in the hash (and in the output).
Since there are some disadvantages to this path rewriting, it is made
optional as BR2_CCACHE_USE_BASEDIR. It defaults to y because the
usefulness of ccache is severely reduced without this option.
In addition to CCACHE_BASEDIR, we also substitute away the occurences
of $(HOST_DIR) in the calculation of the compiler hash. This is done
regardless of the setting of BR2_CCACHE_USE_BASEDIR because it's
quite harmless.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Our current ccache disables hashing of the compiler executable itself,
because using the default 'mtime' doesn't work in buildroot: we always
rebuild the compiler, so the mtime is always different, so the cache
always misses.
However, in the current situation, if a user changes the compiler
configuration (which would result in the compiler generating different
object files than before) and does 'make clean all', ccache may in fact
reuse object files from the previous run. This rarely gives problems,
because
(1) the cache expires quite quickly (it's only 1GB by default),
(2) radically changing compiler options will cause cache misses because
different header files are used,
(3) many compiler changes (e.g. changing -mtune) have little practical
effect because the resulting code is usually still compatible,
(4) we currently don't use CCACHE_BASEDIR, and almost all object files
will contain an absolute path (e.g. in debug info), so when
building in a different directory, most of it will miss,
(5) we do mostly build test, and many of the potential problems only
appear at runtime.
Still, when ccache _does_ use the wrong cached object files, the
effects are really weird and hard to debug. Also, we want reproducible
builds and obviously the above makes builds non-reproducible. So we
have a FAQ entry that warns against using ccache and tells the user to
clear the cache in case of problems.
Now that ccache is called from the toolchain wrapper, it is in fact
possible to at least use the 'mtime' compiler hash for the external
toolchain and for the host-gcc. Indeed, in this case, the compiler
executable comes from a tarball so the mtime will be a good reference
for its state. Therefore, the patch (sed script) that changes the
default from 'mtime' to 'none' is removed.
For the internal toolchain, we can do better by providing a hash of
the relevant toolchain options. We are only interested in things that
affect the compiler itself, because ccache also processes the header
files and it doesn't look at libraries because it doesn't cache the
link step, just compilation. Everything that affects the compiler
itself can nicely be summarised in $(HOST_GCC_FINAL_CONF_OPTS). Of
course, also the compiler source itself is relevant, so the source
tarball and all the patches are included in the hash. For this purpose,
a new HOST_GCC_XTENSA_OVERLAY_TAR is introduced.
The following procedure tests the ccache behaviour:
Use this defconfig:
BR2_arm=y
BR2_CCACHE=y
make
readelf -A output/build/uclibc-1.0.6/libc/signal/signal.os
-> Tag_CPU_name: "ARM926EJ-S"
Now make menuconfig, change variant into BR2_cortex_a9
make clean; make
readelf -A output/build/uclibc-1.0.6/libc/signal/signal.os
-> Tag_CPU_name: "ARM926EJ-S"
should be "Cortex-A9"
After this commit, it is "Cortex-A9".
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Danomi Manchego <danomimanchego123@gmail.com>
Cc: Károly Kasza <kaszak@gmail.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that the calls to gcc always pass through the toolchain wrapper, it
is no longer necessary to patch gcc to support poisoning.
This does have the disadvantage that there is no unsafe path check for
libc, libgcc and libstdc++ (all of these are built before the wrapper
exists). But we can assume that the toolchain components themselves
should be pretty safe.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We have a toolchain wrapper for external toolchain, but it is also
beneficial for internal toolchains, for the following reasons:
1. It can make sure that BR2_TARGET_OPTIMIZATION is passed to the
compiler even if a package's build system doesn't honor CFLAGS.
2. It allows us to do the unsafe path check (i.e. -I/usr/include)
without patching gcc.
3. It makes it simpler to implement building each package with a
separate staging directory (per-package staging).
4. It makes it simpler to implement a compiler hash check for ccache.
The wrapper is reused from the external toolchain. A third CROSS_PATH_
option is added to the wrapper: in this case, the real executable is in
the same directory, with the extension .real.
The creation of the simple symlinks is merged with the creation of the
wrapper symlinks, otherwise part of the -gcc-ar handling logic would
have to be repeated.
The complex case-condition could be refactored with the one for the
external toolchain, but then it becomes even more complex because
they each have special corner cases. For example, the internal
toolchain has to handle *.real to avoid creating an extra indirection
after host-gcc-{final,initial}-rebuild.
Instead of creating the .real files, it would also have been possible
to install the internal toolchain in $(HOST_DIR)/opt, similar to what
we do for the external toolchain. However, then we would also have to
copy things to the sysroot and do more of the magic that the external
toolchain is doing. So keeping it in $(HOST_DIR)/usr/bin is much
simpler.
Note that gcc-initial has to be wrapped as well, because it is used for
building libc and we want to apply the same magic when building libc.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Jérôme Oufella <jerome.oufella@savoirfairelinux.com>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gcc used to be installed into $(HOST_DIR)/usr/$(GNU_TARGET_NAME) but
since gcc 4.9 this is no longer the case. Therefore, the cc -> gcc
symlink that is created in that we create in that directory is dead.
There don't seem to have been any problems due to the missing gcc and
cc in $(HOST_DIR)/usr/$(GNU_TARGET_NAME), things seems to build fine
without it. The cc -> gcc symlinks in general should not be needed
anyway, since we always pass the appropriate CC variable to the
package build system.
Therefore, let's remove the cc -> gcc symlink in
$(HOST_DIR)/usr/$(GNU_TARGET_NAME) - also for pre-4.9 gcc versions.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When gcc 4.9.x was bumped from 4.9.2 to 4.9.3 in commit
2fed00ea1e, patch
920-libgcc-remove-unistd-header.patch was removed with the argument
that it had been applied upstream.
However, it is not the case, and the patch continues to apply fine on
gcc 4.9.3, and is actually needed to make gcc build properly on
NIOS-II.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit wires up the gcc version dependency mechanism in the
internal toolchain backend by making the gcc version choice in the gcc
package Config.in.host select the appropriate
BR2_TOOLCHAIN_GCC_AT_LEAST_* option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Rename the binutils configuration option to match that one used by gcc
where the patchlevel is explicitly left out.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
xtensa libgcc can't be built with -mtext-section-literals flag, now
coming from TARGET_CFLAGS, because it needs to emit literals to
.init/.fini sections, which is not currently supported.
Filter -mtext-section-literals flag out of GCC_COMMON_TARGET_CFLAGS.
Suggested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
