When we build our host programs, and they depend on a host library we
also build, we want to ensure that program actually uses that library at
runtime, and not the one from the system.
We currently ensure that in two ways:
- we add a RPATH tag that points to our host library directory,
- we export LD_LIBRARY_PATH to point to that same directory.
With these two in place, we're pretty much confident that our host
libraries will be used by our host programs.
However, it turns our that not all the host programs we build end up
with an RPATH tag:
- some packages do not use our $(HOST_LDFLAGS)
- some packages' build system are oblivious to those LDFLAGS
In this case, there are two situations:
- the program is not linked to one of our host libraries: it in fact
does not need an RPATH tag [0]
- the program actually uses one of our host libraries: in that case it
should have had an RPATH tag pointing to the host directory.
For libraries, they only need an RPATH if they depend on another library
that is not installed in the standard library path. However, any system
library will already be in the standard library path, and any library we
install ourselves is in $(HOST_DIR)/usr/lib so already in RPATH.
We add a new support script that checks that all ELF executables have
a proper DT_RPATH (or DT_RUNPATH) tag when they link to our host
libraries, and reports those file that are missing an RPATH. If a file
missing an RPATH is an executable, the script aborts; if only libraries
are are missing an RPATH, the script does not abort.
[0] Except if it were to dlopen() it, of course, but the only program
I'm aware of that does that is openssl, and it has a correct RPATH tag.
[Peter: reworded as suggested by Arnout, fix HOT_DIR typo in comment]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When a series file exists, we should use every file mentioned in it,
not just the ones ending with .patch or .diff. Also, there's no need
to uncompress anything if it's mentioned in a series file (the tools
that manipulate series files don't support compressed patches).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Doug Kehn <rdkehn@yahoo.com>
Tested-by: Doug Kehn <rdkehn@yahoo.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
'quiet' variable is set and exported, but it is not used. We can safely
remove it.
This variable is inherited from the Makefile of the Linux kernel, and
is not used in Buildroot.
In support/scripts/mkmakefile, 'quiet' value is checked, but the test
is always true ('quiet' is never set to silent_), so the test can be
removed as well.
Signed-off-by: Cédric Marie <cedric.marie@openmailbox.org>
Reviewed-by: "James Knight" <james.d.knight@live.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
add this heuristic when no specific license file is found
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The format of the users table files is non trivial, so it is sometimes
handy to add comments explaining the syntax (or simply the reason for
the user) inline in the files.
Ignore empty lines and comment lines prefixed with '#' similar to shell
or makedevs files.
Packages that defined no user (the vast majority) would cause an empty
line to be present in the internal users table, hence the reason we
skipped empty usernames. Now that we ignore empty lines, we no longer
need to check for empty usernames.
Reported-by: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This new script uses the data collected by the step_pkg_size
instrumentation hook to generate a pie chart of the size contribution
of each package to the target root filesystem, and two CSV files with
statistics about the package size and file size. To achieve this, it
looks at each file in $(TARGET_DIR), and using the
packages-file-list.txt information collected by the step_pkg_size
hook, it determines to which package the file belongs. It is therefore
able to give the size installed by each package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- Check for Thread::Queue, not Thread:Queue.
- Use 'printf' instead of 'echo -e', since printf is POSIX, but not
'echo -e'.]
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
All the complexity with the different ways that CMAKE_C_COMPILER and
CMAKE_C_COMPILER_ARG1 can be set are no longer needed, it's all handled
by the toolchain wrapper now.
Note that it is still necessary to handle this for the host build.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
the perl dependency of cpan module is no longer generated by scancpan,
but added at the infrastructure level
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When a module is native or depends of a native module, it must be
disabled for static builds via its Config.in
We detect native modules by looking at the filenames listed in the
MANIFEST. If there is a file which looks like it contains code that
much be compiled (e.g. .c, .h and so on...), then we exclude that
module (and its dependencies) from static builds.
That's what we tried to do so far, but failed when there was a
comment on the same line as the filename in the manifest, like so:
foo-bar.c # Bla bla bla
Fix that by detecting either endof-line (as currently done) or
end-of-string.
For an example of failed build of perl-html-parser, see
http://autobuild.buildroot.net/results/128/128671dfa23d843698a63220c2fac1f44e1d5845/
[Thomas: use better commit log proposed by Yann E. Morin.]
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
with Perl 5.22, Module-Build is no longer a core module
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When the version of a package is a Mercurial tag, the download fails,
with:
abort: unknown revision 'X.Y.Z'!
This is because, in Mercurial, tags are commits like the others, and
when we clone, we actively request a tag. But then, the server
"dereferences" that tag and sends us the revision pointed to by that
tag. Of course, since the tag is a commit after the revision we got,
we do not have the revision adding the tag.
So, we just have to download the full repository to be sure we have
the tags in our local clone.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since commit 5f117c3 (webkit: mark as deprecated), generation of the
manual has been broken.
This is because that commit added a deprecated dependency on a
prompt-less symbol, BR2_PACKAGE_WEBKIT_ARCH_SUPPORTS. However, the
generation script does not check that a symbol has a prompt before
it attempts to add it to the deprecated list. So, we end up with
traceback:
Writing the virtual-packages list in:
/home/ymorin/dev/buildroot/O/build/docs/manual/virtual-package-list.txt
Traceback (most recent call last):
File "/home/ymorin/dev/buildroot/buildroot/support/scripts/gen-manual-lists.py", line 510, in <module>
buildroot.print_list(list_name, dry_run=args.dry_run, output=output)
File "/home/ymorin/dev/buildroot/buildroot/support/scripts/gen-manual-lists.py", line 466, in print_list
item_label=item_label)
File "/home/ymorin/dev/buildroot/buildroot/support/scripts/gen-manual-lists.py", line 126, in format_asciidoc_table
enable_choice=enable_choice))
File "/home/ymorin/dev/buildroot/buildroot/support/scripts/gen-manual-lists.py", line 350, in _format_symbol_prompt_location
return "| {0:<40} <| {1}\n".format(get_label_func(symbol),
File "/home/ymorin/dev/buildroot/buildroot/support/scripts/gen-manual-lists.py", line 458, in <lambda>
get_label = lambda x: self._get_symbol_label(x, mark_depr)
File "/home/ymorin/dev/buildroot/buildroot/support/scripts/gen-manual-lists.py", line 313, in _get_symbol_label
label = symbol.get_prompts()[0]
IndexError: list index out of range
However, we can not use the existing _is_deprecated filter function to
filter out symbols without prompts, because this function is also used
to add a '(deprecated)' tag in the man package list (not that it would
not work, but it does not seem /right/). Furthermore, it could also be
used (but is currently not) to build the list of virtual packages, which
do not have a prompt.
So, introduce a filter function, aptly named _is_deprecated_feature(),
to be used as the filter to find deprecated feature, and keep the
existing _is_deprecated() that can be used in any context to decide
whether a symbol is deprecated or not.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In 50c8b7e (support/download: support -q in all download backends), the
backend were made to respect the quietness of the main Makefile, when -s
is poassed on the 'make' command line. In doing so, they were all made
to be verbose by default.
However, the verbosity of some of the tools, like scp, is very high, and
is in fact intended for debug purposes.
Drop being verbose by default, just use whatever each tool deems normal
output. Only respect the quietness requested by the user.
Reported-by: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
underscore is not allowed in BR package name.
this problem was found with the Perl module DB_File
which must give the BR package perl-db-file.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 971faf8 (Makefile: fix out-of-tree builds with multiple targets
with 'all') renamed the default target to '_all' to avoid name-clashing.
In doing so, I forgot to also fix the instance in the .PHONY rule.
Fix that now.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
skeleton being a mandatory dependency, we don't want all our packages to
have a link back to that node, the graph would be awful.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Small optimization so we don't have another 'make' level (caused by the
umask fix) when running the generated makefile.
Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The introduction of <pkg>_STRIP_COMPONENTS broke the build of the
target tar package, because support/dependencies/check-host-tar.mk
defines TAR_STRIP_COMPONENTS to --strip-components. Which leads to
have the package infrastructure do:
$$(TAR_STRIP_COMPONENTS)=$$($(2)_STRIP_COMPONENTS)
which for the tar package evaluates to:
$$(TAR_STRIP_COMPONENTS)=$$(TAR_STRIP_COMPONENTS)
which evalutes to:
--strip-components=--strip-components
Which obviously doesn't work really well. And in fact the
TAR_STRIP_COMPONENTS definition in
support/dependencies/check-host-tar.mk is no longer necessary: it was
needed in the days where we were trying to support old tar versions
that did not support --strip-components. But nowadays, when such an
old tar version is encountered, we build our own host-tar which
supports --strip-components.
Fixes:
http://autobuild.buildroot.org/results/ae2/ae20df67f99f75b1ba5d5b7316ad265d66f3aa66/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is useful when a tag is not avaiable.
Also fix support for Fedora where the command "cvs -r :<version>" doesn't work.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Kconfiglib now runs as either Python 2 or Python 3.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
These weren't available when gen-manual-lists.py was first written.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Buildroot doesn't use $srctree from what I could tell.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Corresponds to a95f477 in https://github.com/ulfalizer/Kconfiglib.
Fixes:
- Unset user values when loading a zero-byte .config. (5e54e2c)
- Ignore indented .config assignments. (f8a7510)
- Do not require $srctree to be set for non-kernel projects. (d56e9c1)
- Allow digits in $-references to symbols. (ecacdd5)
- Add Symbol.is_allnoconfig_y(). (deaa624)
- Fix small output issue with Comments inside Choices.
Also adds Python 3 support and has a lot of internal cleanup and
optimization.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The following allows a user definition to specify that a created user
entry should not have a password value set. Original implementation
allowed a user definition to provide a password value of "=" (no quotes)
to generate a crypt-encoded empty string value. In some cases, it may be
desired to have no value specified for a user's password. By using a
value "-" for a password, no value will be set in the shadow value.
An example when this can be used is when logging into a terminal.
Logging into a session with an encoded empty password will prompt a user
to enter a password since it does not know the password is empty. If the
password field blank, a login session will not prompt for a password.
Signed-off-by: James Knight <james.knight@rockwellcollins.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Following commit 95a572282e (pkg-infra: move the git download helper to a
script, 2014-07-02), move the comment describing the shallow clone trickery as
well. Merge this comment with the existing helper comment that was added in
7e40a1103a (support/download: convert git to use the wrapper, 2014-08-03).
Rename $($(PKG)_DL_VERSION) to ${cset} to match the helper code context.
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that custom external toolchains to be downloaded properly instruct
to not fail on a missing hash, restore the mandatory hash check for
everything else.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In very constrained cases, it might be needed to not fail if a hash is
missing. This is notably the case for custom external toolchains to be
downloaded, because we do have a .hash file for external toolchains,
but we obviously can not have hashes for all existing custom toolchains
(he, "custom"!).
So, add a way to avoid failing in that case.
>From the Makefile, we export the list of files for which not to check
the hash. Then, from the check-hash script, if no check was done, and
the file we were trying to match in in this exclusion list, we just exit
without error.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
changes v6 -> v7:
- /beautify/ the pattern in the case clause
Changed v5 -> v6: (Arnout)
- fix the pattern in the case clause
Changes v4 -> v5:
- micro-optimisation, use case-esac instead of a for-loop (Arnout)
- typoes (Arnout)
Changes v3 -> v4:
- drop the magic value, use a list of excluded files (Arnout)
Changes v1 -> v2:
- fix typoes in commit log
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For clarity, this commit renames the TARGETS variable to the more
meaningful PACKAGES variable. Indeed, only packages (handled by one of
the package infrastructures) should be listed in this variable, and
not other random non-package targets.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: fix issues noticed by Arnout:
- Rewrap the linux/Config.in paragraph
- Revert the "is a toolchain dependency" -> "has a toolchain
dependency" change from pkg-generic.mk, as the original was
correct.]
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When downloading from a repository, we explicitly pass no hash file,
because we can't check hashes in that case.
However, we're still printing a message that there is a missign hash
file.
Beside being a bit annoying (since we can't do anything about it), it
may also be wrong, especially for packages for which we support multiple
versions, with some being downloaded via a git clone and others as
tarballs.
Just print no warning when the path to the hash file is empty.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When the user selects a custom toolchain to be downloaded, there's no
hash for that toolchain, so the download fails, now that hashes are
mandatory.
Fix that by simply exiting as if there was no error, until we have a
better fix...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of silently accepting a missing .hash file, print a warning.
This can be grepped from a build log, to find packages that still have
no hash, with the long-term goal of adding hashes for all packages.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
At the time we introduced hashes, we did not want to be too harsh in the
beginning, and give people some time to adapt and accept the hashes. So
we so far only whined^Wwarned about a missing hash (when the .hash file
exists).
Some time has passed now, and people are still missing updating hashes
when bumping packages.
Let's make that warning a little bit more annoying...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When checking hashes reports no hash for a file, and this is treated as
an error (now: because BR2_ENFORCE_CHECK_HASH is set; later: because
that will be the new and only behaviour), exit promptly in error.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Return different exit codes depending on the error that occured:
0: no error (hash file missing, or all hashes match)
1: unknown option
2: hash file exists, but at least one hash in error
3: hash file exists, but no hash for file to check
4: hash file exists, but at least one hash type unknown
This will be used in a later patch to decide whether the downloaded file
should be kept or removed.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support to explicitly state that an archive has no hash.
This can be used for archives downloaded from a repository, like a
git-clone or a subversion checkout, or using the github helper.
This will come in handy when we'll eventually make hashes mandatory as
soon as a .hash file exists: for some packages, like gcc, some versions
are downloaded as archives from upstream, while other versions may come
from a GitHub repository (via the github herlper).
In this case, a .hash file would exist, that contains hashes for the
downloaded tarballs, but archives downloaded from the repository would
not have a hash (since it is currently not possible to have reproducible
such archives). So, we'd need a way to explicitly state there is no
hash, on purpose, for those archives.
So, add 'none' as a new type of hash.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, specifying a hash file for our download wrapper is mandatory.
However, when we download a git, svn, bzr, hg or cvs tree, there's by
design no hash to check the download against.
Since we're going to have hash checking mandatory when a hash file
exists, this would break those downloads from a repository.
So, make specifying a hash file optional when calling our download
wrapper and bail out early from the check-hash script if no hash file is
specified.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Like for --stop-on, make --exclude recognise the keyword 'virtual',
to stop on virtual packages (as explained in the help...).
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Similar to --stop-on, but also omits the package from the graph.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Francois Perrad <fperrad@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Francois Perrad <fperrad@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a new option to graph-depends, that users can set to stop the graph
on a specific (set of) package(s).
This accepts any actual package name, or the 'virtual' keyword to stop
on virtual packages.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Francois Perrad <fperrad@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The current error messages are a bit terse, and do not provide all the
required information.
Expand them to provide more context.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Tom Elliott <tommygunsster@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This change prevents CMake from searching outside the sysroot location
for CMake modules when cross-compiling.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Most of targets listed in TARGET_EXCEPTIONS these days are long
gone, so why still keep them?
Most of those targets were removed in this commit:
http://git.buildroot.net/buildroot/commit/?id=02b88600312554bf166f6cfd71f7f2ede783096a
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
virtual packages are found by their version,
so we retrieve the version of all packages
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
