The target "$(LINUX_DIR)/.stamp_initramfs_rebuilt" uses its own
'cp' command, instead of LINUX_INSTALL_IMAGE/LINUX_INSTALL_IMAGES_CMDS
provided by (or updated with) commit 055e6162bb ("linux: don't build
appended DTB image in place and support multiple images") and thus is
not operating properly when APPENDED_DTB is used.
Indeed, it copies a single image, and does not copy the one with the DTB
appended.
This patch replaces the 'cp' command with LINUX_INSTALL_IMAGE which
handles APPENDED_DTB.
Fixes: 055e6162bb ("linux: don't build appended DTB image in place and
support multiple images")
Signed-off-by: Sebastian Frias <sf84@laposte.net>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When setting BR2_LINUX_KERNEL_LATEST_VERSION, it is hard for the user to
know that this version is subject to change in the future.
Explicit this in the Kconfig entry text.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since quite some time, the kernel and bootloader communities consider
zImage as the default format for kernel images on ARM, replacing
uImage. The load address information in uImage is no longer needed,
since the kernel is position-independent in terms of physical address,
except on a few old platforms. For most people, using zImage is simply
better/simpler, so let's switch to zImage as the default image format
on ARM.
All defconfigs are updated: 46 defconfigs no longer need to select
explicitly zImage because it's the default, and 16 defconfigs now need
to explicitly select uImage because that's no longer the default.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Matt Weber <matt@thewebers.ws>
Acked-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds the ability to compile and install the kernel
selftests into the target at /usr/lib/kselftests. The rationale behind
/usr/lib is that the selftests have subdirectories where they are
installed which makes them unsuitable to be placed in /usr/sbin as
this would result in /usr/sbin/kselftests/x/y/z. While the selftests
aren't libraries either, they don't achieve much as a standalone
binary so they can be considered to be a 'library of tests' making
/usr/lib sensible.
The selftests require that the kernel headers be installed into the
kernel build tree as some of the selftests have a hardcoded CFLAGS to
include kernel headers (CFLAGS += -I../../../../usr/include/). This is
most easily achieved by using the make ... headers_install inside the
kernel build dir.
This is likely to be a rarely used debugging/performance feature for
development and unlikely to be used in a production configuration.
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas:
- remove bash as a build dependency, it is only a runtime dependency.
- fix typo in the Config.in help text, and rewrap
- add missing 'depends on BR2_USE_MMU' dependency for the comment.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Forcefully disable the features that have optional dependencies that are
not enabled in Buildroot.
Disable support for bionic since, well, we're not Android.
Slightly re-order the variables to have semantically-related variables
together, with features last.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
perf does not honour the -j flags we pass to make; it yet again tries to
reinvent the wheel and by default uses the number of CPUs as the number
of parallel jobs.
Fortunately, in their infinite wisdom, the insane developpers of the
perf buildsystem were kind enough to provide us with a variable we can
set to specify the number of parallel jobs.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The perf buildsystem, inside the kernel, is not really amenable to be
easily used...
Regarding the documentation, it will forcefully try to detect asciidoc
and, with the latest versions, xmlto, completely disregarding what the
user may provide.
We currently pass ASCIIDOC= (the empty string) on the make command line,
as an attempt to disable building the documentation, but that has no
effect whatsoever on perf: that variable is not passed down to the
sub-sub-make (yes, a two-level depth) that is responsible for building
the documentation.
We really do not want to build any of the documentation (the user can
refer to the documentation on his own development machine), so we use a
little dirty trick: we provide a GNUmakefile beside the existing
Makefile for the documentation; GNUmakefile always takes precedence over
a Makefile when both are present. We only provide a catch-all-no-recipe
rule in that GNUmakefile, so it really does nothing useful, except avoid
building the documentation.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We need to pass an argument to ld for setting the endianness when
building it for MIPS architecture, otherwise the default one will always
be used (which is big endian) and the compilation for little endian will
always fail showing an error like this one:
LD foo.o
mips-linux-gnu-ld: foo.o: compiled for a little endian system and target
is big endian
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Kernels older than 3.9 (not counting stable releases) used the
timeconst.pl perl script for their build process.
The problem with this script is that it used deprecated perl features,
namely defined(@array) which was removed for the perl 5.22 release,
causing build failure of older kernels on newer distributions.
To fix this instead of going the hard way (moving to the new
timeconst.bc script) use the easy way by patching timeconst.pl with an
upstream patch used for stable releases.
First try a dry-run on the patch to see if it applies, if it does then
call a proper APPLY_PATCHES to it.
Tested against an arbitrary 2.6.30 kernel (applies and builds), against
4.4.1 for a missing timeconst.pl (does not apply since it's missing) and
3.8.13 (does not apply since it's fixed already).
Known broken distributions: fedora 23, debian testing (stretch) and unstable
(sid).
Signed-off-by: Gustavo Zacarias <gustavo.zacarias@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It is no longer meaningful, now that we have the option to use the
kernel version for the linux headers, as it is more logical and more
versatile.
Add it to legacy.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is the Vivante kernel driver split from the kernel source code in
order to make it possible to be used in any kernel source since 3.10.53.
The driver source code provided by Freescale needs fixes so the
community forked the code to allow faster development and easier
integration of fixes from the community.
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/32cf391https://github.com/Freescale/meta-fsl-arm/commit/4249193
This package has been tested with the following commands:
# modprobe galcore
# cd /usr/share/examples/viv_samples/vdk/
# ./tutorial7
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some heavily (and most often improperly) modified Linux kernels may export
new APIs to userland, so as to speak to custom hardware or custom kernel
facilities.
However, we currently have no easy way to use such kernels as a source
for the linux-headers package, which precludes having those userland
headers intalled for userland applications to use them.
We do have a way for the kernel to use the same version as for the
headers, but that is definitely not enough, as the linux-headers package
has a version choice that is far less versatile and capable than that of
the linux package.
Add a new option for the linux-headers package, for the user to specify
that the version (really, the sources) of the kernel be used to install
the headers from.
We do that by making linux-headers patch-depend on the linux package.
We can't have linux-header simply depend on linux, because the simple
dependency means the the dependee will be configured, built and installed
before the dependent is configured. And since linux is a target package,
it depends on the toolchain, which internally dependes on linux-headers,
which would depend on linux, and we'd get a circular dependency.
Using patch-depend will ensure that linux is extracted and patched
before linux-headers is extracted, which is really all we need.
Then, we install the headers from the linux source tree, rather than
from linux-headers' source tree (as there's nothing in there!).
Since we need to install a private set for uClibc (see cde947f, uclibc:
prevent rebuilding after installation to staging), we explicitly set
INSTALL_HDR_PATH when calling the kernel' install-headers rule in
LINUX_HEADERS_CONFIGURE_CMDS, so that the headers are installed in
linux-headers' $(@D) instead of linux' $(@D).
Finally, as there is no way to know the kernel version in this case, we
must still prompt the user for the kernel series the headers are from
(like we do for a custom version) and check for consistency at build
time.
Note however that this still leaves users that want to built their
such-kernel outside of Buildroot out in the cold.
[Peter: drop comment as suggested by Thomas]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Karoly Kasza <kaszak@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some fine version control systems make all files read-only. The custom DTS file
may therefore be read-only, and that permission is preserved when copying into
the Linux build directory. A subsequent rebuild tries to 'cp' again, which
fails with a "Permission denied" error unless the -f option is used.
Signed-off-by: Hollis Blanchard <hollis_blanchard@mentor.com>
Acked-by: Nikolay Dimitrov <picmaster@mail.bg>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The perf tool installed test files in
output/target/usr/libexec/perf-core/tests/
which amounted to about 30+K.
Since they are not needed for normal perf operation, remove them.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, packages that need the kernel to have support for laodable
modules have two ways to require it:
- either the use the kernel-module infra, which does it automatically,
- or they do not use it, and they need to require it manually by
setting the corresponding Makefile variable; however, they must only
set it when they are actually enabled, which makes for a slightly
cumbersome and ugly code, like:
ifeq ($(BR2_PACKAGE_FOO),y)
LINUX_NEEDS_MODULES = y
endif
Introduce a new blind Kconfig option that packages can select to signify
they need kernel modules. That Kconfig option is then used to set the
Makefile variable.
It makes it cleaner:
- code is simpler (one Kconfig line instead of a Makefile if-block,
- this is handled at the Kconfig level, which is where we usually
handle such dependencies.
Packages will be updated in follow-up commits.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix improper use of qstrip; use correct variables.
Fixes#8546.
Reported-by: craigswank@gmail.com
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
[yann.morin.1998@free.fr: move the kconfig-package hunk to the
corresponding patch]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the linux.mk logic for appended DTB image does the
appending of the DTB in place, directly at the end of the zImage using
a >> sign. This is incorrect because if you run "make linux-rebuild"
multiple times, you get the DTB appended over and over again to the
image.
Since keeping the 'zImage' or 'uImage' name for the appended DTB image
is not very clear, this commit moves to using the 'zImage.<dtb>' and
'uImage.<dtb>' format. This way, we can clearly distinguish the
original image from the appended one.
In addition, this naming scheme easily allows to generate *multiple*
appended DTB images: from one zImage, you can generate multiple
zImage.<dtb> for several DTBs, and then generate (if requested) the
corresponding uImage.<dtb>.
To achieve this, this commit:
- Changes the definition of LINUX_APPENDED_DTB to iterate over
$(KERNEL_DTS_NAME), and generate a zImage.<dtb> image for each of
them.
- Changes the addition of LINUX_APPENDED_DTB for appended uImage to
also iterate over $(KERNEL_DTS_NAME).
- Provide a different implementation of LINUX_INSTALL_IMAGE which
installs all the appended DTB images (but not the bare image)
- Remove the checks that verified that only one DT name is passed
when appended DTB is used, since we now support generating multiple
DT images.
Some of the tested configuration:
- Normal uImage with several DTBs
BR2_LINUX_KERNEL_DEFCONFIG="mvebu_v7"
BR2_LINUX_KERNEL_UIMAGE=y
BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x200000"
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="armada-xp-matrix armada-xp-gp armada-370-mirabox"
Contents of output/images/:
armada-370-mirabox.dtb armada-xp-gp.dtb armada-xp-matrix.dtb uImage
- Normal zImage with several DTBs
BR2_LINUX_KERNEL_DEFCONFIG="mvebu_v7"
BR2_LINUX_KERNEL_ZIMAGE=y
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="armada-xp-matrix armada-xp-gp armada-370-mirabox"
Contents of output/images:
armada-370-mirabox.dtb armada-xp-gp.dtb armada-xp-matrix.dtb zImage
- Appended uImage with several DTBs:
BR2_LINUX_KERNEL_DEFCONFIG="mvebu_v7"
BR2_LINUX_KERNEL_APPENDED_UIMAGE=y
BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x200000"
BR2_LINUX_KERNEL_INTREE_DTS_NAME="armada-xp-matrix armada-xp-gp armada-370-mirabox"
Contents of output/images:
uImage.armada-370-mirabox uImage.armada-xp-gp uImage.armada-xp-matrix
- Appended zImage with several DTBs:
BR2_LINUX_KERNEL_DEFCONFIG="mvebu_v7"
BR2_LINUX_KERNEL_APPENDED_ZIMAGE=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="armada-xp-matrix armada-xp-gp armada-370-mirabox"
Contents of output/images:
zImage.armada-370-mirabox zImage.armada-xp-gp zImage.armada-xp-matrix
In all configurations, the contents of output/target/boot/ was the
same if BR2_LINUX_KERNEL_INSTALL_TARGET=y.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When you're using the "appended DTB" mode, the Device Tree blob gets
appended to your kernel image, so there is no point in installing both
the DTB and the kernel image to the images or target directories,
installing the kernel image itself is sufficient.
Therefore, this commit disables the definition of LINUX_INSTALL_DTB
when appended DTB is used.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the LINUX_INSTALL_DTB and LINUX_INSTALL_DTB_TARGET macros
are exactly the same, except for the target directory.
Similarly, LINUX_INSTALL_KERNEL_IMAGE_TO_TARGET and
LINUX_INSTALL_IMAGES_CMDS are copying the kernel image, just to a
different place (and with a different strategy).
As a preparation for future additions, this commit de-duplicate this
code:
- LINUX_INSTALL_DTB becomes a make macro that takes one argument: the
destination directory.
- LINUX_INSTALL_IMAGE is a new make macro that also takes on
argument: the destination directory.
Both macros are used by LINUX_INSTALL_KERNEL_IMAGE_TO_TARGET and
LINUX_INSTALL_IMAGES_CMDS to respectively install to the target
directory and the images directory.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Linux for MIPS supports raw binary zboot image (vmlinuz.bin).
Add it to the "Kernel binary format" list.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This selection will ensure that the correct host tools
will be build used for the kernel compression method used.
[Maxime: Select the compression opts in the kernel config too ]
Signed-off-by: Sagaert Johan <sagaert.johan@proximus.be>
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998 at free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
On aarch64, the image name is always Image, so let's add support for
that.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
So it doesn't conflict with host-dtc. The Linux kernel version may be a
patched version supporting E.G. overlays.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since v4.0 the fbtft drivers are included in the linux kernel
staging area.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When a package wants to build a kernel module, we should ensure that the
kernel does support modules.
This patch does it automatically for packages using the kernel-module
infrastructure.
Packages that do not use it will have to set it manually (to be done in
a followup patch).
Suggested-by: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Noé Rubinstein <noe.rubinstein@gmail.com>
Cc: Jan Viktorin <viktorin@rehivetech.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
