Commit 9696d27756 "package/gpsd: condition python stuff to the proper
kconfig option" changed the condition in which the gpsd python scripts
are installed. After that change, the "gpsfake" command (which is a
python script) is no longer found and the runtime test is failing.
This commit fixes the issue by reflecting the change in the runtime
test Buildroot configuration.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit b6f4d79df21b2affa1ccc5133c44647072d21058)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The mysql virtual package was removed in commit 8708f3a23a
"package/mysql: drop virtual package".
The mariadb runtime test was authored before this mysql virtual
package removal, but was merged after it, in commit 5356754d1e
"support/testing: add mariadb runtime test". Due to this, this test
always failed with the error:
Makefile.legacy:9: *** "You have legacy configuration in your .config! Please check your configuration.". Stop.
This commit fixes the issue by removing the legacy
BR2_PACKAGE_MYSQL=y configuration directive.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/7540345406
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 3da3361a1b9cafb274dac776693720fe20f6681b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Runtime tests running on test runners are subject to a high
variability in term of performance and timing. Most or the runtime
test commands are executed with a timeout, in pexpect.
Slow or very loaded test runners can use the timeout_multiplier to
globally increase those timeouts.
Some runtime test commands sometimes needs to poll or query a state,
rather than having purely sequential actions. It is sometimes hard to
know, from the test writer point of view, the maximum timeout to set, or
if a retry logic is needed.
In order to help debugging runtime tests failing due very slow
execution, this commit adds extra information on the host test runner
about its load in the run log. Relevant information are: number of
cpus, the load average at the moment the emulator is started and the
current timeout_multiplier.
Note: this change was discussed in:
https://lists.buildroot.org/pipermail/buildroot/2024-July/759119.html
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 7a6edbc7b9166c799b43cf9a9b78422c8e20ccc0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The gpsfake command line has a typo (a missing space), which makes the
next gpsctl command to always fail.
This commit fixes the issue by adding the missing space.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/7391792948
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 49156a0fa4a48d5d80f03c3854f631f312b486d4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 2fe638af2632424b826843675311f9a258a57b71)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Lots of people are using broken text editors that 1. do not naturally
terminate text files with a final \n as is customary in UNIX text files,
and 2. do not respect our .editorconfig settings, which explicitly
require adding that final newline. See this nice summary of what a text
file is (with references to applicable standards):
https://stackoverflow.com/questions/12916352/shell-script-read-missing-last-line/12916758#12916758
So, it is not surprising that read does not read the last "line" of a
file, when said "line" does not end with a newline, because it is thus
not really a line.
Even though we do mandate actual text files, let's be a little bit lax
in this respect, because people may write packages, and their hash
files, in a br2-external tree, and they may not have our .editorconfig
in the directory heierarchy (e.g. if buildroot is a submodule of their
br2-external tree, or whatever).
mapfile does not suffer from this limitation, though, and correctly
reads all lines from a file, even the final line-that-is-not-a-line.
mapfile was introduced in bash 4.0, released on 2009-01-20, more than
15 years ago. Debian squeeze, released in 2011 already had bash 4.1.
Those are really ancient. So, it means we can indeed expect bash
version 4.0 or later; which means mapfile is available.
"It should be fine!"
Fixes: #15976
Reported-by: masonwardle@gmail.com
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit ac2e6b392791085bc29fa21901265a8eed4ae0ee)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To give us a chance to catch runtime issues (such as missing
dependencies) more easily, add a test that writes a sample PDF file,
read it back and verify the text that was read.
Like similar packages that lead to a big
rootfs (e.g. python-botocore), this test requires a separate ext2
rootfs to avoid filling the default amount of RAM available
entirely (which would cause missing files from the root filesystem and
in turn, test failures).
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 115e9493b8e3b50cd56b93c47d669319d02698a7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 21da0df09db09700948c27782d0bb446a0ad66f8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit f77d698f83 changed apply-patches to
use $TAR instead of `tar`, but did not define a fallback if $TAR is not
defined. This results in an error when calling apply-patches.sh from
outside Buildroot's Makefile. Our team uses this script to setup local
checkouts of Buildroot package's with patches for development.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 118c824b565442bfe1d4ae1c0a39d330e624b854)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Note that here, it is in fact not really relevant. We only extract a
tarball, and we don't use any "modern" or GNU-only options like
--strip-components. However, for consistency it's better to use the same
tar everywhere.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: "Maier, Brandon L Collins" <Brandon.Maier@collins.com>
Reviewed-by: brandon.maier@collins.com
[Arnout: quote TAR="..."]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit f77d698f83)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When running a test that uses host-python-setuptools using the Buildroot
Docker image, for example running the following command,
> ./utils/docker-run ./support/testing/run-tests -o output -s -k tests.package.test_python_pytest.TestPythonPy3Pytest
The build fails with the following error,
> File "/home/blmaier/buildroot/output/TestPythonPy3Pytest/build/host-python-setuptools-69.2.0/setuptools/_distutils/dist.py", line 354, in _gen_paths
> yield pathlib.Path('~').expanduser() / filename
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> File "/home/blmaier/buildroot/output/TestPythonPy3Pytest/host/lib/python3.11/pathlib.py", line 1385, in expanduser
> raise RuntimeError("Could not determine home directory.")
> RuntimeError: Could not determine home directory.
>
> ERROR Backend subprocess exited when trying to invoke get_requires_for_build_wheel
Python setuptools is looking for $HOME but failing to find it.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 4dafb8b5c2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
No functional change as we install a python symlink, but use python3 for
consistency with the other scripts.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit ed9288505c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The python-magic-wormhole runtime test can randomly fail on slow
runners, see [1].
The issue is that the sending command is started first in background
_without_ redirecting its output to /dev/null. The receiving command
is started after, expecting the message to be printed on the first
standard output line. On slower systems, the sending command still
print messages while the test controller expect output from the
receiving command. The expected string finally appear, but not on the
first line. This makes the test fail.
This commit fixes the issue by redirecting all outputs (stdout, stderr)
of the sending command to /dev/null. To help even more, the sleep time
is moved from the emulator to the test controller. The sleep time is
also multiplied by the timeout_multiplier.
Fixes: [1]
[1] https://gitlab.com/buildroot.org/buildroot/-/jobs/6888691508
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
(cherry picked from commit 9a734700d7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Replace br-i386-pentium-mmx-musl by bootlin-x86-i686-musl to avoid the
following build failure with efivar and musl < 1.2.3 as suggested in
https://patchwork.ozlabs.org/project/buildroot/patch/20240303171115.1140763-1-ju.o@free.fr:
/home/buildroot/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/i586-buildroot-linux-musl/9.3.0/../../../../i586-buildroot-linux-musl/bin/ld: ./libefisec.so: undefined reference to `qsort_r'
Fixes:
- http://autobuild.buildroot.org/results/a0ed3970da8a84d884b26c081b49b8d2b7208829
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit a8be4a04ad)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The lvm2 package now enables the required Kernel configuration. The
Kernel config fragment included in this test is no longer needed.
This commit removes it.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 9339343111)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The CPIO filesystem generated by TestPerlDBDmysql is too large, and
doesn't fit as an initramfs in the 256MB of RAM available in the
versatilepb machine. This causes a failure while running a basic
test "perl -MDBI -e '1'" since "/usr/lib/perl5", and many files
being missing from the root filesystem, ultimately causing the test
to fail.
Can't locate DBI.pm in @INC (you may need to install the DBI module)
(@INC entries checked: /usr/lib/perl5/site_perl/5.38.2/arm-linux
/usr/lib/perl5/site_perl/5.38.2 /usr/lib/perl5/5.38.2/arm-linux
/usr/lib/perl5/5.38.2).
It would make sense to switch all test cases to use ext2 + a
hard-drive, but for now, let's fix the few test cases that are causing
problems.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/6735654506
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 8937cd065c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
