The toolchain still use binutils 2.25 without the fix for PR19405.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Our musl support has now been around for quite some time, numerous
packages have been fixed (although admittedly not all). It's time to no
longer call our musl support "experimental": things are now expected to
be working with musl just like with the other two C libraries we
support.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As noticed by Romain Naour, commit
4d39ca1c2a ("toolchain-external: fix
installation for CodeSourcery AArch64 toolchain") has a small bug where
a post-install hook doing fixups in TARGET_DIR was registered as a
staging installation hook while it should have been registered as a
target installation hook. This commit fixes this inconsistency.
Reported-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add hash for the toolchain sources.
Runtime tested with Qemu with qemu_mips_malta_defconfig
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 519d83bfa0 adds support for GCC
6. Add an GCC 6.x option for external toolchains, too.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The extracted toolchain sources contains a single symlink in the
aarch64-linux-gnu/libc/lib directory wich is lost during Buildroot's
staging install.
aarch64-linux-gnu/libc/lib/ld-linux-aarch64.so.1 -> ../lib64/ld-2.18.so
Add a custom post install staging and target hooks to create it
manually.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: also make the same tweak in the target.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The sysroot toolchain support check is duplicated at two locations in
the external toolchain infra. So move it inside the
check_unusable_toolchain helper that is called when the toolchain
package is configured (TOOLCHAIN_EXTERNAL_CONFIGURE_CMDS).
The check in TOOLCHAIN_EXTERNAL_INSTALL_SYSROOT_LIBS can be safely
removed since it's already done in check_unusable_toolchain helper.
The check in TOOLCHAIN_EXTERNAL_INSTALL_TARGET_LIBS was removed by
2a87b64f8e.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When a message with MESSAGE, we can print it as the first command of
the command sequence, and in this case, we don't need to use a shell
continuation.
In one case, the call to MESSAGE is moved a few lines up in the
sequence of commands.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As suggested by Arnout, this commit renames:
- TOOLCHAIN_EXTERNAL_INSTALL_BFIN_FDPIC to
TOOLCHAIN_EXTERNAL_INSTALL_TARGET_BFIN_FDPIC
- TOOLCHAIN_EXTERNAL_INSTALL_BFIN_FLAT to
TOOLCHAIN_EXTERNAL_INSTALL_TARGET_BFIN_FLAT
Which makes it clear that those variables are installing libraries to
the target, and make their naming more consistent with the naming of
other variables in the file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With the alignment of toolchain library location in target and staging,
there is no need anymore for the distinction between LIB_EXTERNAL_LIBS and
USR_LIB_EXTERNAL_LIBS. Unify them into TOOLCHAIN_EXTERNAL_LIBS.
Related, update the help text of
BR2_TOOLCHAIN_EXTRA_TOOLCHAIN_EXTERNAL_LIBS.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The toolchain-external logic is roughly:
- populate the staging dir by rsyncing the entire ${ARCH_LIB_DIR} and
usr/${ARCH_LIB_DIR} from sysroot.
- populate the target dir by explictly copying some libraries from sysroot
into target/lib and some other libraries in target/usr/lib, the split
being hardcoded into buildroot regardless of the location in the sysroot.
This means that a library libfoo could be located in:
staging/lib/libfoo.so
target/usr/lib/libfoo.so
When debugging an application that links against this library, gdb will
fruitlessly search for 'usr/lib/libfoo.so' in staging, and then suggest to
use 'set solib-search-path' which is a hack, really.
To solve the problem, we need to make sure that libraries from the toolchain
are installed in the same relative location in staging and target.
Achieve this by:
- replacing the convoluted search for libraries using for+find in sysroot
with a simple find in staging.
- determining DESTDIR for each library individually based on the location in
staging.
- treating LIB_EXTERNAL_LIBS and USR_LIB_EXTERNAL_LIBS equivalently
These changes also allow for the removal of most arguments to
copy_toolchain_lib_root in the method itself and their callers.
Test procedure:
- set configuration for a given toolchain
- make clean toolchain
- find output/target | sort > /tmp/out-before
- apply patch
- make clean toolchain
- find output/target | sort > /tmp/out-after
- diff -u /tmp/out-before /tmp/out-after
The only changes should be some libraries moving from lib to usr/lib or vice
versa. Notable examples being libstdc++ and libatomic.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas:
- use -L instead of -follow in the find invocation, as suggested by
Arnout.
- move the BR2_STATIC_LIBS condition as a make condition rather than
a shell condition, as suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The installation of the gdbserver binary has no relation to the installation
of the target libraries. Moving it to a separate define improves the
understandability of the code and makes later refactoring easier.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
[Thomas:
- move the BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY condition as a make
condition rather than a shell condition, as suggested by Romain
Naour.
- rename the TOOLCHAIN_EXTERNAL_INSTALL_GDBSERVER variable to
TOOLCHAIN_EXTERNAL_INSTALL_TARGET_GDBSERVER as suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For external Blackfin toolchains with BR2_BFIN_INSTALL_FDPIC_SHARED set,
the FDPIC shared libraries are currently only copied to the target
directory, not to staging.
For debugging purposes, an unstripped copy in staging is necessary.
Moreover, this change will simplify a subsequent change that lines up the
location of shared libraries between target and staging directories.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In TOOLCHAIN_EXTERNAL_INSTALL_TARGET_LIBS, ARCH_SUBDIR is calculated but not
used, and can thus be removed. Since SYSROOT_DIR is only used for the
calculation of ARCH_SUBDIR, it can be removed too.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Linux kernel doesn't even support i386 anymore, there is no NPTL
support for i386 and uClibc-ng only supports NPTL on x86, so there is
essentially no usable thread implementation. Most likely glibc and
musl also don't support i386 either. So it's time to remove the
support for this architecture variant.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When a toolchain is glibc based, the getent package assumes that
$(STAGING_DIR)/usr/bin contains the getent program. Unfortunately, the
Codescape MIPS toolchains do not conform with this:
$(STAGING_DIR)/usr/{bin,sbin} are empty, and instead three directories
are provided: bin-o32, bin-n32 and bin-n64 (ditto for sbin), one for
each supported MIPS ABI.
Since this is a toolchain-specific oddity, we handle it by adding a
post-install fixup hook that creates $(STAGING_DIR)/usr/{bin,sbin} as
symbolic link to the appropriate directory.
Fixes:
http://autobuild.buildroot.org/results/9c0ee836021553319f166f9de88750535aee0a58/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As we currently download the actual sources as part of saving the
legal-info, we do not check the hashes of those downloads.
That's because, during legal-info, there is not package involved, and
thus there's no path to an actual .hash file.
However, this precludes legal-info from working in off-line mode. A
subsequent patch will make it possible to do so, and actual sources will
be downloaded as another classical package download.
This will have two consequences:
- first, we will be able to add hashes for actual sources, so we can
ensure their integrity,
- second, and as a direct consequence of the above, when a .hash file
is present, it would have to list all the hashes for that package,
or that would be treated as an error.
Currently, the only package that falls in this case is the external-
toolchain, for which we have means to retrieve the sources for some of
the toolchains.
So we just add hashes for those actual external-toolchain sources we may
have to download.
Those hashes are not used for now, but they'll come into play a few
patches down.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Abele <jason@nextthing.co>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
While the prebuilt musl toolchains provided by http://musl.codu.org/
had not been updated in a while, a new release based on musl 1.1.12
has been put online in December 2015. This commit updates our external
toolchain package to use this new pre-built toolchain.
Compared to the previous 1.1.6 toolchain, there are some changes:
- The MIPS big endian soft-float variant is no longer available.
- The Microblaze variant is no longer available.
- SuperH 4, both little and big endian, variants have been added.
- The components have been updated: gcc 5.3 is used, binutils 2.25.1,
and of course musl 1.1.12.
Besides the update itself, in this commit, we are:
- Making the musl toolchain non-selectable on MIPS big endian
soft-float.
- Making the musl toolchain actually work on MIPS little endian
soft-float, by downloading the right tarball and setting up the
right symbolic link.
- Removing support for the Microblaze variant, and adding support for
the SH4 variants.
All variants except armeb have been boot tested under Qemu, up to a
Busybox shell prompt. armeb has not been tested due to the lack of a
Qemu configuration for this architecture.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, we have a pattern-matching that automatically derives the
the source tarball filename from the binary tarball filename.
However, the latest Linaro toolchains no longer follow that scheme (and
do not even readily provide the sources...).
Remove the generic pattern-matching, and explicitly set the source
tarball name for those toolchains that do have a source tarball readily
available.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas: only add the symlink with the old 2014.09 Linaro toolchain,
for the newer ones, it is no longer needed.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Runtime tested with Qemu 2.3.1 using a configuration based on
qemu_arm_vexpress_defconfig with BR2_ARM_ENABLE_VFP and
BR2_ARM_EABIHF selected
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas: only add the symlink with the old 2014.09 Linaro toolchain,
for the newer ones, it is no longer needed. This has been runtime
tested in Qemu.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Runtime tested with Qemu 2.3.1 using qemu_aarch64_virt_defconfig.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas: only add the symlink with the old 2014.09 Linaro toolchain,
for the newer ones, it is no longer needed. This has been runtime
tested in Qemu.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, following symbolic links are created in both target and
staging directories:
- lib(32|64) --> lib
- usr/lib(32|64) --> lib
The decision for lib32 or lib64 is based on the target architecture
configuration in buildroot (BR2_ARCH_IS_64).
In at least one case this is not correct: when building for a Cavium Octeon
III processor using the toolchain from the Cavium Networks SDK, and
specifying -march=octeon3 in BR2_TARGET_OPTIMIZATION, libraries are expected
in directory 'lib32-fp' rather than 'lib32' (ABI=n32; likewise for
lib64-fp in case of ABI=n64)
More generally the correct symbolic link is from (usr/)${ARCH_LIB_DIR}->lib.
However, feedback from Arnout Vandecappelle is that there are packages that
do depend on the lib32/lib64 symlink, even if ARCH_LIB_DIR is different.
Hence, these links must be kept.
Fix the problem as follows:
- For internal toolchains: no change
- For external toolchains: create a symlink ARCH_LIB_DIR->lib if
(usr/)ARCH_LIB_DIR does not exist yet.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: "Yann E. Morin" <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- rebase on top of master
- remove version number of the Config.in option name.]
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- rebase on top of master
- remove version number of the Config.in option name.]
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As reported by Yann E. MORIN [1], the latest CS PowerPC toolchain (2012.03)
requires a PPC CPU with SPE, which is basically two variants, 8540 (e500v1) and
8548 (e500v2) in Buildroot. All other PPC CPU can't use that toolchain.
Keep CS PowerPC 2011.03 as latest available version and add a second Kconfig
symbol for the CS PowerPC 2012.03 since it's verry specific to one CPU type
(e500v2).
Previously it was possible to select the CS 2012.03 with a powerpc 8540 (e500v1)
CPU but the sysroot provided by the toolchain only support the 8548 (e500v2)
variant. Allow to select CS 2012.03 only with BR2_powerpc_8548.
Also re-add the previous CS toolchain handling for pixman and liquid-dsp.
[1] http://lists.busybox.net/pipermail/buildroot/2015-December/148308.html
Reported-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Following the introduction of the check that target packages must have
their Config.in option enabled, we started to see failures related to
netbsd-queue. Yann fixed the internal toolchain case in commit
e84fd04e88. This commit fixes the
similar issue, but for the external toolchain case.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Arago armv7 toolchain really requires a VFPv3 unit, so only expose
it to the user when the CPU actually has such a VFP unit
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since a few releases, the pre-built musl external toolchain has added
an ARM EABIhf variant, built for ARMv5T. This commit allows this
additional external toolchain to be used.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
See the conclusion about external toolchains during the Buildroot
meeting [1]:
"In the future, we stick to a single external toolchain version. The
Kconfig symbol should not encode the version (avoid legacy handling)"
[1] http://elinux.org/index.php?title=Buildroot:DeveloperDaysELCE2015#Report
Just rename Kconfig symbols
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
See the conclusion about external toolchains during the Buildroot
meeting [1]:
"In the future, we stick to a single external toolchain version. The
Kconfig symbol should not encode the version (avoid legacy handling)"
[1] http://elinux.org/index.php?title=Buildroot:DeveloperDaysELCE2015#Report
Rename the Kconfig symbol even if this toolchain is marked as broken.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
See the conclusion about external toolchains during the Buildroot
meeting [1]:
"In the future, we stick to a single external toolchain version. The
Kconfig symbol should not encode the version (avoid legacy handling)"
[1] http://elinux.org/index.php?title=Buildroot:DeveloperDaysELCE2015#Report
Remove old ADI toolchain handling in glog, openpgm and zeromq.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
See the conclusion about external toolchains during the Buildroot
meeting [1]:
"In the future, we stick to a single external toolchain version. The
Kconfig symbol should not encode the version (avoid legacy handling)"
[1] http://elinux.org/index.php?title=Buildroot:DeveloperDaysELCE2015#Report
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
See the conclusion about external toolchains during the Buildroot
meeting [1]:
"In the future, we stick to a single external toolchain version. The
Kconfig symbol should not encode the version (avoid legacy handling)"
[1] http://elinux.org/index.php?title=Buildroot:DeveloperDaysELCE2015#Report
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
See the conclusion about external toolchains during the Buildroot
meeting [1]:
"In the future, we stick to a single external toolchain version. The
Kconfig symbol should not encode the version (avoid legacy handling)"
[1] http://elinux.org/index.php?title=Buildroot:DeveloperDaysELCE2015#Report
Remove old CS toolchain handling in pixman and liquid-dsp.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
See the conclusion about external toolchains during the Buildroot
meeting [1]:
"In the future, we stick to a single external toolchain version. The
Kconfig symbol should not encode the version (avoid legacy handling)"
[1] http://elinux.org/index.php?title=Buildroot:DeveloperDaysELCE2015#Report
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
