For consistancy and dependencies between uboot and uboot-tools,
this patch migrates the script creation over in a similar way as
the env image creation.
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Migrating the support for this feature to uboot-tools to gain the
ability to build env files when BR2_TARGET_UBOOT isn't selected.
When _ENVIMAGE_SOURCE is not set, we generate a default environment.
However, this default depends on the U-Boot configuration. Therefore,
this can only be done if uboot itself is built as well, and
host-uboot-tools needs to depend on uboot.
For the same reason, the commands for creating the environment have to
be adapted a little. Take this occasion to drastically simplify them.
Note: This patch creates a circular dependency with uboot until the
similar migration patch is merged for uboot scripts
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
It's easier to locate given format when it's sorted.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The buildroot custom bareboxenv compile command misses the additional
include path 'scripts/include' to gain access to the local copy of the
kernel header files (which leads to compile error when using an older
toolchain).
This could be fixed by enhancing the custom bareboxenv compile command
(see [1]) or by using the barebox build system by simply enabling the
CONFIG_BAREBOXENV_TARGET option (available since April 2012, see [2])
instead (as suggested by Yann E. MORIN).
Fixes (with BR2_TARGET_BAREBOX_BAREBOXENV enabled):
build/barebox-2019.12.0/scripts/bareboxenv.c💯10: fatal error: linux/list.h: No such file or directory
[1] http://lists.busybox.net/pipermail/buildroot/2020-January/270942.html
[2] https://git.pengutronix.de/cgit/barebox/commit/?id=afb03d7a554a2911a3742e316f011319fcb416f1
Note: a user who would previously provide a barebox config file which
had CONFIG_BAREBOXENV_TARGET=y, but a Buildroot config file which did
not have BR2_TARGET_BAREBOX_BAREBOXENV=y, would have bareboxenv-target
built, but it would not be installed in the target. Now, and unset
BR2_TARGET_BAREBOX_BAREBOXENV will not even build it, but his is not a
regression: it was anyway previously not installed.
Reported-by: Frederick Gotham <cauldwell.thomas@gmail.com>
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[yann.morin.1998@free.fr:
- also explicitly disable it when not selected
- rewrap commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This commit adds a patch that passes -fno-builtin to fix the build
with gcc 10. The patch has been submitted upstream.
There are no autobuilder failures, since it's a bootloader package,
and therefore not tested by the autobuilders. However, a build failure
was detected when building toolchains and a minimal ARMv7-M system at
https://gitlab.com/bootlin/toolchains-builder/-/jobs/729359529.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Recent versions of OP-TEE depend on Python 3. Currently, OP-TEE is
building with the Python interpreter provided by the user. This patch
includes an upstream patch that makes the interpreter configurable,
and makes use of this configuration with host-python3.
Signed-off-by: Dick Olsson <hi@senzilla.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
U-Boot must use $(BR2_MAKE) as it uses a Make feature from v4.0. We
already use $(BR2_MAKE) in the BUILD_CMDS, but the kconfig commands
still uses $(MAKE). Without this fix, building U-Boot with kconfig will
fail with the following cryptic error.
> Makefile:37: *** missing separator. Stop.
Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Enable this bootloader for cortex a7 based SoCs: support for the
sama7g5 SoC is now in upstream at91bootstrap3, and it is a Cortex-A7
based SoC.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Details: https://lists.gnu.org/archive/html/grub-devel/2020-07/msg00034.html
Fixes the following security issues:
* CVE-2020-10713
A flaw was found in grub2, prior to version 2.06. An attacker may
use the GRUB 2 flaw to hijack and tamper the GRUB verification
process. This flaw also allows the bypass of Secure Boot
protections. In order to load an untrusted or modified kernel, an
attacker would first need to establish access to the system such as
gaining physical access, obtain the ability to alter a pxe-boot
network, or have remote access to a networked system with root
access. With this access, an attacker could then craft a string to
cause a buffer overflow by injecting a malicious payload that leads
to arbitrary code execution within GRUB. The highest threat from
this vulnerability is to data confidentiality and integrity as well
as system availability.
* CVE-2020-14308
In grub2 versions before 2.06 the grub memory allocator doesn't
check for possible arithmetic overflows on the requested allocation
size. This leads the function to return invalid memory allocations
which can be further used to cause possible integrity,
confidentiality and availability impacts during the boot process.
* CVE-2020-14309
There's an issue with grub2 in all versions before 2.06 when
handling squashfs filesystems containing a symbolic link with name
length of UINT32 bytes in size. The name size leads to an
arithmetic overflow leading to a zero-size allocation further
causing a heap-based buffer overflow with attacker controlled data.
* CVE-2020-14310
An integer overflow in read_section_from_string may lead to a heap
based buffer overflow.
* CVE-2020-14311
An integer overflow in grub_ext2_read_link may lead to a heap-based
buffer overflow.
* CVE-2020-15706
GRUB2 contains a race condition in grub_script_function_create()
leading to a use-after-free vulnerability which can be triggered by
redefining a function whilst the same function is already
executing, leading to arbitrary code execution and secure boot
restriction bypass
* CVE-2020-15707
Integer overflows were discovered in the functions grub_cmd_initrd
and grub_initrd_init in the efilinux component of GRUB2, as shipped
in Debian, Red Hat, and Ubuntu (the functionality is not included
in GRUB2 upstream), leading to a heap-based buffer overflow. These
could be triggered by an extremely large number of arguments to the
initrd command on 32-bit architectures, or a crafted filesystem
with very large files on any architecture. An attacker could use
this to execute arbitrary code and bypass UEFI Secure Boot
restrictions. This issue affects GRUB2 version 2.04 and prior
versions.
Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump OP-TEE OS package version to OP-TEE release 3.9.0.
Update patch on pydrypto/pycryptodome to match 3.9.0.
Add patch on CFG_OPTEE_REVISION_MINOR that was not updated in release
3.9.0 and fixed only few commits above.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Before now, U-Boot SPL could only load the Platform Management Unit
(PMU) by patching the board-specific pm_cfg_obj.c file into the generic
PMU firmware, but that then requires generating a new PMU firmware for
every board configuration. To fix that, Luca Ceresoli added support to
U-Boot to load the pm_cfg_obj[1].
Like the PMU firmware, we need a way to pass the PMU cfg to U-Boot
during build. U-Boot only accepts the binary format of the cfg, so we
must convert the source file with the tool provided with U-Boot.
[1] https://lucaceresoli.net/zynqmp-uboot-spl-pmufw-cfg-load/
Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The OpenSBI platform 'qemu/virt' has been removed in v0.8. Builds for
the QEMU 'virt' machine can use the 'generic' platform instead.
Tested with qemu_riscv32_virt_defconfig and
qemu_riscv64_virt_defconfig using Buildroot host-qemu 5.0.0.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Backport a patch from upstream to fix the build on certain versions of
gsc, notably:
Ubuntu 19.10 with gcc (Ubuntu 8.3.0-26ubuntu1~19.10) 8.3.0
Ubuntu 19.10 with gcc (Ubuntu 9.2.1-9ubuntu2) 9.2.1 20191008
The upstream patch is simply a change in the gentpl.py script, which is
used to generate parts of the automake machinery, so if we just backport
the upstream patch, we need to call the script to regenerate those files.
However, the modified script is a python script, so we would need to add
a dependency on host-python (2 or 3), which is not so nice.
Furthermore, calling the script is not enough: it needs a specific set
of optionss for each file it is to generate. That set of options is not
static; it is constructed in the convoluted autogen.sh. Calling
autogen.sh is usally not so good an idea in the Buildroot context, and
indeed this fails becasue it calls to autoreconf, but without our
carefuly crafted options and environment variables.
There was a little light in the tunnel, in that autogen.sh can be told
not to run autoreconf, by setting the environemnt variable
FROM_BOOTSTRAP to an non-=empty string, but this is fraught with various
other side-effects, as in that cause, autogen.sh expects to be valled by
an upper sciopt, bootstrap, which is not provided in the tarball
distribution...
So, between all those issues, autogen, bootstrap, and a host-python (2
or 3) dependency, we choose another route: path the script *and* the one
generated file affected by the change. Since that patched file is a .am
file, we also patch the corresponding .in file
However, we're faced with another issue: the other generated file is
now older than the script, so the automake machinery will now want to
re-run autoconf et al during the build step, which is still not a good
idea for us. So we touch the other generated file so it is mopre recent
than the script.
This is still not sufficient, because the patched file also has a
dependency on the generated file, so we need to touch as well.
Fixes:
- https://bugs.buildroot.org/show_bug.cgi?id=12946
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr:
- keep the hunk about patching gentpl.py
- make it a git-formatted patch
- add the touch
- drastically expand the commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The HTTPS URL seems to be more reliable and quicker for download than
FTP. FTP may also be a blocked protocol on some sites and in CI/CD
setups.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A few conflicts had to be resolved:
- Version number and hash for mesa3d-headers/mesa3d
- Patches added in qemu, and the qemu version number
- The gnuconfig README.buildroot
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The commit [1] "licensing info is only valid for v1.4" fixed the legal-info
issues when a custom ATF tarball or a version from git is used.
But we need to ignore licencing for a used defined official ATF version.
Althougt the ATF version are licensed under BSD-3-Clause, the license
file can be updated between version (for example between v1.4 and v2.0).
Ignore the licencing check if the user provide a custom official version.
[1] d1a61703f7
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: use positive logic with the _LATEST option]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
>From [1] included in optee-os release 3.7.0:
"PyCryptodome is a fork of PyCrypto, which is not maintained any more
(the last release dates back to 2013 [2]). It exposes almost the same
API, but there are a few incompatibilities [3]."
pem_to_pub_c.py/sign.py scripts still use pycrypto that is replaced
by pycryptodomex. Add a patch to use pycryptodomex but don't use
upstream commit since it also switches from the algorithm
TEE_ALG_RSASSA_PKCS1_V1_5_SHA256 to TEE_ALG_RSASSA_PKCS1_PSS_MGF1_SHA256
when replacing pycrypto to pycryptodomex [4].
[1] 90ad245043
[2] https://pypi.org/project/pycrypto/#history
[3] https://pycryptodome.readthedocs.io/en/latest/src/vs_pycrypto.html
[4] ababd72d2f
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/526035730
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
U-Boot versions newer than 2020.01 use Python 3.x instead of Python
2.x in various scripts.
We already had the BR2_TARGET_UBOOT_NEEDS_PYLIBFDT and
BR2_TARGET_UBOOT_NEEDS_PYELFTOOLS options, but depending on the U-Boot
version, we now need to indicate if Python 2.x or Python 3.x should be
used.
In addition, it turns out that some U-Boot configurations need a
Python interpreter, without needing pylibfdt or pyelftools. Some of
our defconfigs were abusing the BR2_TARGET_UBOOT_NEEDS_PYLIBFDT option
to make sure a Python interpreter was built.
To solve this issue, we introduce a choice, that let the users specify
what, if any, host python version is needed. The default is 'no', to
preserve the previous behaviour, unless any of the pylibfdt or the
pyelftools options is enabled, in which case we hide the 'no' option,
and use python 2 by default. This dfault is guaranteed by the order of
options in the choice.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- explicitly make the choice a bool
- make BR2_TARGET_UBOOT_NEEDS_PYTHON a blind option
- introduce the 'no' option in the choice
- reword the commit log accordingly
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The following defconfig:
BR2_x86_i686=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y
BR2_TOOLCHAIN_EXTERNAL_URL="http://toolchains.bootlin.com/downloads/releases/toolchains/x86-i686/tarballs/x86-i686--glibc--bleeding-edge-2018.11-1.tar.bz2"
BR2_TOOLCHAIN_EXTERNAL_GCC_8=y
BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_14=y
BR2_TOOLCHAIN_EXTERNAL_CUSTOM_GLIBC=y
BR2_TOOLCHAIN_EXTERNAL_CXX=y
BR2_INIT_NONE=y
BR2_TARGET_SYSLINUX=y
BR2_TARGET_SYSLINUX_EFI=y
fails to build due to missing setjmp/longjmp definitions, which is a
consequence of a change introduced between gnu-efi 3.0.9 and 3.0.10.
This build failure is fixed by adding another syslinux paytch, which
has been submitted upstream.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some ATF configurations, require a pre-built bare metal toolchain to
build some platforms which host cortex-m series core, for instance
rockchip rk3399 has a cortex-m0 core. Without a pre-built bare metal
toolchain, the build fails:
make[3]: arm-none-eabi-gcc: Command not found
To solve this, this commit implements a
BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN
option. Platforms which have such requirement should enable this
config option.
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When barebox, and thus barebox-aux, are downloaded from a git tree, then
barebox-aux download fails because a hash check is attempted on the
downloaded archive:
Could not fetch special ref 'v2020.03.0'; assuming it is not special.
ERROR: No hash found for barebox-aux-v2020.03.0.tar.gz
This is because we only exclude from the check the archive of the bare
barebox:
BR_NO_CHECK_HASH_FOR += $(BAREBOX_SOURCE)
However, the default name of an archive is based on the package name,
which for barebox-aux is not 'barebox'.
Since barebox-aux really uses the exact same source as the bare barebox,
it should also share the archive name.
This has two direct consequences and advantages:
- the hash check is completely avoided for the barebox-aux archive;
- the barebox-aux archive is not downloaded as it is already
downloaded for barebox.
Reported-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
barebox and barebox-aux are really the same package, from the same URL
and the same version. They deserve being stored in the same directory.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Tested-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Some ATF configurations, such as the ones for the STM32MP1 processor
family, require DTC during the build as Device Tree files are
used. Without dtc, the build fails:
/bin/sh: 1: dtc: not found
dtc version too old (), you need at least version 1.4.4
plat/st/stm32mp1/platform.mk:239: recipe for target 'check_dtc_version' failed
make[1]: *** [check_dtc_version] Error 1
To solve this, this commit implements a
BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_DTC option, in a way that mimics
the BR2_TARGET_UBOOT_NEEDS_DTC option we already have for the U-Boot
package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Tested with qemu_riscv32_virt_defconfig and
qemu_riscv64_virt_defconfig using Buildroot host-qemu 4.2.0.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add missing qstrip wrapping to the new
BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_TARGETS option.
Signed-off-by: Francois Gervais <fgervais@distech-controls.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We can only know the details of the license files for known versions. For
custom, older or newer versions, the license files may change, or may be
moved around.
So, do for optee-os as was done for other packages in the recent past,
and only define the list of license files for the latest version.
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We can only know the details of the license files for known versions. For
custom, older or newer versions, the license files may change, or may be
moved around.
So, do for at91bootstrap3 as was done for other packages in the recent
past, and only define the list of license files for the latest version.
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We can only know the details of the license files for known versions. For
custom, older or newer versions, the license files may change, or may be
moved around.
So, do for Barebox as was done for ATF, linux, and linux-headers, and
only define the list of license files for the latest version.
Add the hash for that license file, and align hashes to the new spacing
convention.
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We can only know the details of the license files for known versions. For
custom, older or newer versions, the license files may change, or may be
moved around.
So, do for U-Boot as was done for ATF, linux, and linux-headers, and only
define the list of license files for the latest version.
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Starting with 2020.01, uboot started using the 'undefine' make
directive, which was only introduced with make 4.0.
In the general case, we do not have a way to know if the uboot
selected by the user is older or later than 2020.01, so we have
no way to know before hand if make >= 4.0 is needed or not. As
such, we have no other option than to always require it.
So, use the existing $(BR2_MAKE_HOST_DEPENDENCY) and $(BR2_MAKE),
both of each will ensure that we do use a make that is at least 4.0.
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Allow specifying additional build targets for ATF.
This might be more useful when using a custom git repository.
For example, when using with the ATF repository from NXP QorIQ,
there is a new build target 'pbl' which is used to build the
pbl binary image. Note that in the specific case of the 'pbl'
target, additional build variables also need to be specified
through BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES.
Signed-off-by: Francois Gervais <fgervais@distech-controls.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The original UBOOT_FIXUP_LIBFDT_INCLUDE hook only works for u-boot versions
starting from v2017.11.
As older u-boot versions are still in common use today, e.g. in the
ci20_defconfig, extend the hook to cover a wider range of u-boot versions.
The main code change was proposed by Arnout Vandecappelle in [1].
Testing and comment changes were done by Thomas De Schampheleire.
Additional (build) testing done by Yann.
[1] http://lists.busybox.net/pipermail/buildroot/2019-May/251231.html
This was tested with the following defconfigs, that each excercise one
case:
----.-- No defconfig identified
2010.06 'lib/libfdt/', used to be simply 'libfdt' before upstream commit 0de71d507157...
2013.10 ci20_defconfig
2014.04 'srctree' used to be called 'SRCTREE' before upstream commit 01286329b27b27ea...
2017.05 olimex_a13_olinuxino_defconfig
2017.11 scripts/dtc/libfdt only exists since upstream commit c0e032e0090d6541549b19cc...
2018.01 mx6udoo_defconfig
2018.03 core change is equivalent to upstream commit e0d20dc1521e74b82dbd69be53a04884...
2019.10 nanopi_neo_defconfig
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
[yann.morin.1998@free.fr: add the build-test results]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add an upstream URL to the help text in Config.in. This
addresses the issue where an incorrect URL is displayed
on the package stats web page.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When at91bootstrap3 was bumped to 3.9.0 in commit
513899e471, an incorrect hash was set:
it was the hash of the tarball generated by the Git download logic of
Buildroot, and not the hash of the tarball auto-generated by Github,
which is the one that we really download by default.
Fixes:
ERROR: at91bootstrap3-v3.9.0.tar.gz has wrong sha256 hash:
ERROR: expected: 9960b0d18fe42feee566d4c52efa0d7c8251685bf9acfdf343f30a27951ada1e
ERROR: got : e23e6df23b79ca81e412cb73a1f48bd95df8d46c7d52a1d073c2ed9d4f3a1a71
ERROR: Incomplete download, or man-in-the-middle (MITM) attack
Reported-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
[Thomas: improved commit log]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Implement possibility to download AT91Bootstrap from a custom tarball
URL.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds support for GICv3 (such as GIC-500).
Signed-off-by: Jan Kotas <jank@cadence.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch improves the DTB handling, using a parameter
in more recent versions of the bootwrapper.
Signed-off-by: Jan Kotas <jank@cadence.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch bumps the bootwrapper version to the latest.
Signed-off-by: Jan Kotas <jank@cadence.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
It allows you to add the u-boot.itb to the list of U-Boot images that
can be created. Like the others, this one is also copied to the image
folder.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, when BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33 is
enabled, the arm-trusted-firmware package assumes that the BL33 image
provided by U-Boot is u-boot.bin. However for some platforms, the name
may be different (for example u-boot-dtb.bin). To support such use
cases, this commit adds a string option
BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_BL33_IMAGE to configure the
U-Boot image name, which defaults to u-boot.bin to preserve backward
compatibility.
Signed-off-by: Jerry Huang <jerry.huang@nxp.com>
Reviewed-by: Sergey Matyukevich <geomatsi@mail.com>
[Thomas: rewrite commit log and Config.in help text]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This adds support for different platforms where the binaries have
different extensions.
Signed-off-by: Michael Schenk <michael.schenk@noser.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump OP-TEE OS package version to OP-TEE release 3.7.0.
This adds host-python-pyelftools to optee-os dependencies
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
In commit 2c8ff251cb ("boot/uboot: add
option to generate env image from default env"), the possibility of
generating an environment image using the built-in U-Boot environment
as a source was added.
This is meant to happen when the string option
BR2_TARGET_UBOOT_ENVIMAGE_SOURCE is empty, but the original commit
added the Config.in help text to BR2_TARGET_UBOOT_ENVIMAGE, which is a
boolean option, and therefore cannot be empty.
Move the help text to BR2_TARGET_UBOOT_ENVIMAGE_SOURCE, where it
belongs.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump OpenSBI to the latest version. We need a patch for RV32 to avoid
hard/soft float build failures.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The RISCV Proxy Kernel (AKA BBL) isn't being used by most distros so has
very limited testing. It has been replaced by OpenSBI and been
deprecated for awhile, so let's just remove it.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Bump version of Marvell DDR training software. This update accompanies
update of the ARM Trusted Firmware used on Marvell A8K platforms.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since release 18.12 binaries-marvell repository provides
common firmware supporting both A7K and A8K SoC families.
This commit bumps package version to 18.12 and removes
platform specific binary selections from Config.in.
Single firmware image suitable for both A7K and A8K
platforms is now specified in mk file explicitely.
Legacy handling is not needed, as configs which did have
the option set will continue to work without change.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
[Arnout:
- Remove BINARIES_MARVELL_IMAGE entirely;
- Add remark about legacy handling;
- Remove the deprecated option from the defconfigs and test that use
it.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since the ts4800_defconfig has been removed, the ts4800-mrboot package
is no longer useful, therefore we drop it.
Cc: Patrick Keroulas <patrick.keroulas@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
U-Boot supports a number of environment variables to pass specific
information. The following patches were submitted in the past to one
some specific Config.in option to pass some of these variables:
- http://patchwork.ozlabs.org/patch/881197/ proposed an option to
pass a custom EXT_DTB= variable
- http://patchwork.ozlabs.org/patch/1018245/ proposed an option to
pass a custom DEVICE_TREE= variable
Instead of adding one Config.in option for each of those variables,
let's provide a generic mechanism to pass arbitrary variables during
U-Boot build step.
Cc: Konstantin Porotchkin <kostap@marvell.com>
Cc: Clemens Gruber <clemens.gruber@pqgruber.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some platform may generate specific boot image files instead of
the generic files tee.bin and tee-*_v2.bin when building OP-TEE OS
package.
This change introduces optee-os configuration directive
BR2_TARGET_OPTEE_OS_CORE_IMAGES that allows board configuration
to specify its expected boot image file names.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
[Thomas: use the current hardcoded values as the default for the new
config option, to avoid breaking existing setups, and therefore use
$(wildcard ...) to support wildcards]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
[Thomas:
- Config.in: move the BR2_TARGET_OPENSBI_PLAT dependency to a
"depends on", there's no need to have an if...endif block just for
that.
- Config.in: drop the BR2_TARGET_OPENSBI_LIBRARY_ONLY dependency,
since this option doesn't exist
- opensbi.mk: don't use qstrip on BR2_TARGET_OPENSBI_LINUX_PAYLOAD,
since it's a boolean option
- opensbi.mk: use += when adding linux to DEPENDENCIES
- opensbki.mk: refactor the firmware file installation with a loop]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds support to extract compiled in default env
via u-boot's get_default_envs script and generate env image from it.
Signed-off-by: Denis Osterland <Denis.Osterland@diehl.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The licensing information, and especially the name of the license file,
is known only for the official v1.4 version. For example, in later
versions, the license file has been renamed.
Since we can't be sure of the licensing information for custom versions,
or for versions from git, define that only for the known v1.4 version.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Adam Duskett <aduskett@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
>>> uboot 2019.07 Collecting legal info
ERROR: No hash found for Licenses/gpl-2.0.txt
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Barebox starting from 2019.02 no longer ships flex/bison generated
parser. Add conditional kconfig dependencies, same as we did for kernel
and uboot.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add upstream patch fixing a build warning that is considered as error.
Cc: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
On Github, a large number of projects name their tag vXYZ (i.e v3.0,
v0.1, etc.). In some packages we do:
<pkg>_VERSION = v0.3
<pkg>_SITE = $(call github foo,bar,$(<pkg>_VERSION))
And in some other packages we do:
<pkg>_VERSION = 0.3
<pkg>_SITE = $(call github foo,bar,v$(<pkg>_VERSION))
I.e in one case we consider the version to be v0.3, in the other case
we consider 0.3 to be the version.
The problem with v0.3 is that when used in conjunction with
release-monitoring.org, it doesn't work very well, because
release-monitoring.org has the concept of "version prefix" and using
that they drop the "v" prefix for the version.
Therefore, a number of packages in Buildroot have a version that
doesn't match with release-monitoring.org because Buildroot has 'v0.3'
and release-monitoring.org has '0.3'.
Since really the version number of 0.3, is makes sense to update our
packages to drop this 'v'.
This commit only addresses the (common) case of github packages where
the prefix is simply 'v'. Other cases will be handled by separate
commits. Also, there are a few cases that couldn't be handled
mechanically that aren't covered by this commit.
Signed-off-by: Victor Huesca <victor.huesca@bootlin.com>
[Arnout: don't change flatbuffers, json-for-modern-cpp, libpagekite,
python-scapy3k, softether]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Bump OP-TEE OS package version to OP-TEE release 3.5.0.
The hash of the license file changed due to a fairly minor change in
the file:
-Unless it has its own copyright/license embedded in its body, each source file
+Unless it has its own copyright/license embedded in its body, each file
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
[Thomas: update the license file hash]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Install generated trusted shared libraries in the target file
system next to the trusted applications.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This change fixes the TA binary files install sequence that were
previously install in target filesystem though
OPTEE_OS_INSTALL_IMAGES_CMDS instead of expected
OPTEE_OS_INSTALL_TARGET_CMDS.
This change removes useless mkdir prior call to $(INSTALL) that
already handles parent directory creation when needed.
This change conditions the .ta files installation upon their
availability as they may exist or not depending on the exact OPTEE
version/configuration selected.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Rockchip rk3399 SOC based boards require python pyelftools library for
parsing dtb files, so lets add it as uboot dependency.
This commit introduces a new config option
BR2_TARGET_UBOOT_NEEDS_PYELFTOOLS to achieve this.
Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
All downloads performed by buildroot should be integrity-checked if
possible. Enable integrity-checking for the RISC-V OpenSBI sources by
adding a corresponding hash file.
Signed-off-by: Karsten Merker <merker@debian.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following check-package warning:
boot/barebox/barebox.hash:5: missing newline at end of file
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes#11756
This fixes the following build error with newer binutils:
objcopy -O binary mbr.elf mbr.bin
perl /build/syslinux/src/syslinux/mbr/checksize.pl mbr.bin
mbr.bin: too big (452 > 440)
Corresponding bug reports:
- https://bugs.archlinux.org/task/60405
- https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=906414
Strip the .note.gnu.property in the linker scripts for the MBRs.
Signed-off-by: Christian Stewart <christian@paral.in>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
OpenSBI is a much improved alternative to BBL (riscv-pk). Add OpenSBI
support to buildroot.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
[Thomas:
- disable target installation, as we install nothing
- enable staging installation
- enable images installation only when needed
- improve the comment about the staging installation]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When the trusted firmware is built with debug support (DEBUG defined),
the generated images are located in a different path compared to a
build without debug support. The non debug images are located in
generated directory build/<platform>/release/ while the debug images
are located in generated directory build/<platform>/debug/.
This change introduces the boolean option
BR2_TARGET_ARM_TRUSTED_FIRMWARE_DEBUG to define whether the release or
debug configuration is used to build trusted firmware.
Note that enabling trusted firmware debug support using
BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="... DEBUG=1 ..."
would not work since Buildroot will try to copy the generated files
from the wrong path.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This change allows one to build trusted firmware (TF-A) with OP-TEE as
BL32 secure payload.
When BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL32_DEFAULT is enabled TF-A
builds a BL32 stage according the TF-A configuration directive. If
these specify no BL32 stage then TF-A will build without BL32
support. This is the default configuration and reflects TF-A legacy
integration in BR.
When BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL32_OPTEE is enabled TF-A builds
with support for the OP-TEE OS as BL32.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
[Thomas: rename config options, simplify option prompts, and rework
option description.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This change allows one to build the TF-A (Trusted Firmware A) for
32bit architectures Armv7 and Armv8 platforms. TF-A supports these
configuration since release v1.5.
Change dependency on BR2_aarch64 into a dependency on either
BR2_ARM_CPU_ARMV8A/BR2_ARM_CPU_ARMV7A to better define
the target architectures supported by the package.
Set package configuration directive ARM_ARCH_MAJOR according to
BR2_ARM_CPU_ARMV8A/BR2_ARM_CPU_ARMV7A. Set package configuration
directive ARCH based on BR2_aarch64/BR2_arm.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This upgrades to version 48 plus the last commits done after that.
Note, that after that, gummiboot is officially dead, so there will
be no more upstream commits after this.
For various reasons, there are still users of gummiboot, so let's base our
work on the latest gummiboot "version".
Signed-off-by: Esben Haabendal <esben@haabendal.dk>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds a new variable OPTEE_OS_SDK, define by the optee-os
package, which points to the OPTEE SDK installed in STAGING_DIR. This
will allow other pakage to find this SDK more easily.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
[Thomas: improve commit log, rename variable to just OPTEE_OS_SDK]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 1a437fd22f bumped gnu-efi to version 3.0.9. This breaks the build
of syslinux with EFI support due to multiple definitions of 'memset' and
'memcpy'. Backport a patch already applied upstream to fix the problem.
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
OP-TEE OS is maintained by the OP-TEE project. It provides an
open source solution for development and integration of secure
services for Armv7-A and Armv8-A CPU based platforms supporting
the TrustZone technology. This technology enables CPUs to
concurrently host a secure world as the OP-TEE OS and a non-secure
world as a Linux based OS.
The OP-TEE project maintains other packages to leverage OP-TEE on
Linux kernel based OSes. An OP-TEE interface driver is available
in the Linux kernel since 4.12 upon CONFIG_OPTEE.
This change references in Buildroot the today's latest OP-TEE
revision release tagged 3.4.0.
https://www.op-tee.org/https://github.com/OP-TEE/optee_os
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
[Thomas:
- pass CFG_ARM32_core=y when building for ARMv7, otherwise the build
fails
- add a check that verifies that BR2_TARGET_OPTEE_OS_PLATFORM is not
empty
- minor formatting fixes/adjustements.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following check-package warning:
boot/uboot/Config.in:185: attributes order: type, default, depends on, select, help (http://nightly.buildroot.org/#_config_files)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Rockchip's rk3328 encapsulates the BL31 part of ATP but it needs
image in ELF format. This is extension to
2c4809e608
This commit introduces a BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF variable
to achieve this.
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Allow user to choose specific, stable version from official ATF
repository
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
At kconfig time, dependencies are not built, and therefore host-ccache
is not ready. Due to this, using $(HOSTCC) as the host compiler in
KCONFIG_OPTS does not work: a "make uboot-menuconfig" invocation from
a clean tree with ccache enabled fails.
This commit fixes this by using $(HOSTCC_NOCCACHE). We cannot rely on
the default value of HOSTCC passed by the kconfig-package
infrastructure, because $(UBOOT_MAKE_OPTS) also contains a HOSTCC
definition that would override the one passed by the kconfig-package
infrastructure.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds a package for 'shim', an EFI bootloader for secure
boot chain loading.
While gnu-efi supports 32bit ARM, this is currently broken in shim.
Patches to fix this have been submitted upstream but are not included
here for now.
https://github.com/rhboot/shim/pull/162
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Thomas: use BR2_PACKAGE_GNU_EFI_ARCH_SUPPORTS, add separate depends
on to exclude ARM32 build.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This will be used in packages that depend on gnu-efi, and we take this
opportunity to propagate this dependency where it was missing in
gummiboot and syslinux. In practice, it was not a problem because
gummiboot and syslinux are only available on i386 and x86-64, which is
a subset of the architectures supported by gnu-efi.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Following d0f4f95e39 ("Makefile: rework
main directory creation logic"), BINARIES_DIR is not implicitly
created by the main Makefile at the beginning of the build, leaving
that up to whatever piece of code needs to install something in
$(BINARIES_DIR).
The afboot-stm32 package didn't pay attention to this, which this
commit fixes.
While at it, we move the afboot-stm32 installation into
<pkg>_INSTALL_IMAGES_CMDS, because using <pkg>_INSTALL_TARGET_CMDS to
install only files to BINARIES_DIR is a bit strange.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/131217111
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add notes to test grub2 running on ARM using qemu. The arm section
describes how to run it using u-boot and aarch64 shows how to do it
using efi, which is similar to what has to be done for x86_64.
The source for OVMF builds is also changed to
https://www.kraxel.org/repos/jenkins/edk2/ which is the source for
nightly builds (as rpms but which can be extracted in any distribution),
as the sourceforge link provided only very old builds.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
[Thomas:
- formatting fixes
- simplify the AArch64/EFI example by using the aarch64_efi_defconfig]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit enables the arm-uboot, arm-efi and aarch64-efi grub2
platforms in Buildroot.
With the uboot platform, the grub2 image gets built as a u-boot image
and is loaded from u-boot through a regular "bootm". The only
requirement from the u-boot side in order to allow this is that u-boot
is built with CONFIG_API enabled. CONFIG_API seems to not be enabled
by default in most in-tree configurations, however, it seems to be
available for quite some time now. So it might be possible to use this
even on older u-boot versions. This is available only for arm
(32-bit).
With the efi platform, grub2 gets built as an EFI executable. This
allows EFI firmware to find and load it similarly as it can be done
for x86_64. Also, since u-boot v2016.05, u-boot is able to load and
boot an EFI executable, so the uboot efi platform can also be used
from u-boot in recent versions. This has been enabled (mostly) by
default for ARM u-boot. efi platform is available for both arm and
aarch64.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
[Thomas: move the BR2_USE_MMU dependency in
BR2_TARGET_GRUB2_ARCH_SUPPORTS]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add an option to install grub2 support tools to the target.
In the context of Buildroot, some useful target tools provided are
grub2-editenv, grub2-reboot, which provide means to manage the grub2,
environment, boot order, and others.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
grub2 requires the host grub2-mkimage tool to build some of its target
images. The current way of building this tool in the grub2 package is
to perform a simultaneous host-tools/target-bootloader build during
the grub2 build step.
This method makes the recipe complex to understand, and proved to be a
complication during the work to enable grub2 support for architectures
other than x86.
This patch tries to do a better separation between the build of grub2
host tools and target boot loader image, as a partial step to enable
grub2 to build for other architectures.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When building with glibc 2.28+, the "major", "minor" and "makedev"
functions are defined in "sys/sysmacros.h". This commit backports
upstream commit 1a74985b2a404639b08882c57f3147229605dfd5 to fix the
build with glibc 2.28.
Link: https://www.syslinux.org/wiki/index.php?title=Building
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We already use $(MKIMAGE_ARCH) in lots of places; use it here too.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We already use $(MKIMAGE) instead of $(HOST_DIR)/bin/mkimage in xvisor, linux,
and cpio; use it here too.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We already use $(MKIMAGE) instead of $(HOST_DIR)/bin/mkimage in xvisor, linux,
and cpio; use it here too.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
U-boot has provided SPL support as a viable replacement for the
2nd stage bootloader on TI platforms. The X-loader project
hasn't had a commit in the log since 12-05-2011.
(https://gitorious.org/x-loader/x-loader)
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As reported by Jeff Wittrock in bug #11396, the U-Boot environment
image checksum is invalid for big endian targets, because the test on
the BR2_ENDIAN Config.in option doesn't take into account that it is
double quoted.
The fix was provided by Jeff himself on bugzilla.
Fixes bug #11396.
Reported-by: Jeff Wittrock <jwittrock@faultrecorder.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Passing CFLAGS/CPPFLAGS in the environment confuses the ATF version
provided by Marvell, and we in fact only need to pass CROSS_COMPILE,
which is already in ARM_TRUSTED_FIRMWARE_MAKE_OPTS.
We however keep TARGET_MAKE_ENV so that the PATH with $(HOST_DIR) is
kept.
This change has been tested with all current defconfigs that build
ATF:
- arm_juno
- bananapi_m64
- freescale_imx8mqevk
- friendlyarm_nanopi_a64
- friendlyarm_nanopi_neo2
- nitrogen8m
- olimex_a64_olinuxino
- orangepi_pc2
- orangepi_prime
- orangepi_win
- orangepi_zero_plus2
- pine64
- pine64_sopine
- solidrun_macchiatobin_mainline
- solidrun_macchiatobin_marvell
- zynqmp_zcu106
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Note that the license file has been entirely rewritten (hence the
change in the hash), but it is still GPL-2.0 with FreeRTOS exception.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is necessary to be able to bump the ARM Trusted Firmware version
used on Marvell platforms.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add the RISC-V Proxy Kernel (pk) package which provides the Berkeley
Boot Loader for booting RISC-V kernel images.
Signed-off-by: Mark Corbin <mark.corbin@embecosm.com>
[Thomas:
- fix prompt of option to be just "riscv-pk"
- add blank line between help text and upstream URL in Config.in file
- use $(INSTALL) instead of cp to install the generated image]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When using the legacy buildsystem, the kconfig parser may still be used,
as reported by Thomas:
>>> uboot 2018.09 Configuring
...]
HOSTCC scripts/basic/fixdep
HOSTCC scripts/kconfig/conf.o
YACC scripts/kconfig/zconf.tab.c
bin/sh: 1: bison: not found
ake[3]: *** [scripts/kconfig/zconf.tab.c] Error 127
ake[3]: *** Waiting for unfinished jobs....
LEX scripts/kconfig/zconf.lex.c
bin/sh: 1: flex: not found
However, in that case, the kconfig parser is only generated during the
'configure' step, so we can add bison/flex as standard dependencies.
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
U-Boot fails to build in a GitLab CI context because the kconfig-package
build stage is unable to find bison or flex even though they are
installed in HOST_DIR.
To fix this, set UBOOT_MAKE_ENV so that UBOOT_KCONFIG_MAKE uses the
correct PATH.
Signed-off-by: Thomas Preston <thomas.preston@codethink.co.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Recent U-Boot no longer ship the flex/bison generated kconfig parser, as
of commit e91610da7c8a9fe42f3e5a75f06c3d1a0cb5f815 (kconfig: re-sync
with Linux 4.17-rc4).
So, add the conditional kconfig dependencies, as we just did for the
kernel.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some U-Boot configurations use lzop, which may not be available on the
build machine since it's not a mandatory dependency of Buildroot.
To solve this, a new option BR2_TARGET_UBOOT_NEEDS_LZOP is introduced,
and handled in a similar way to the existing
BR2_TARGET_UBOOT_NEEDS_OPENSSL option.
This fixes the build of the dra7xx_evm U-Boot defconfig as of U-Boot
2018.07, on a build machine without lzop installed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
