During the latest Buildroot Developers meeting, we discussed that
test-pkg would perhaps be more widely used if it tested a smaller
subset of toolchains. Indeed, it currently tests 47 toolchains, which
takes very long to build. Several of the toolchain configurations are
quite similar, and it is perhaps not necessary for contributors to
test them all before submitting a package.
Therefore, this commit changes the test-pkg script to only test a
subset of the toolchain configurations by default. The N first
configurations of the CSV files are tested, where N is hard-coded in
the script. The CSV file has therefore been re-organized to have the
first N toolchains be the most important ones.
A -a/--all option is added to test with all toolchains, while a
-n/--number option is added to test with the first N toolchains, N
being passed on the command line.
Note that the list of toolchains (built in the "toolchains" shell
variable) is no longer sorted. Indeed, when the first N toolchains are
tested, we want them to be tested in the same order as they are listed
in the CSV file, as we are careful to order them in an interesting
order. We only sort when all toolchains are tested.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
package/Config.in, package/Config.in.host, package/x11r7/Config.in and
package/kodi/Config.in do not comply with the normal Config.in
indentation rules. However, this violation of the rule is legitimate, so
let's skip them in check-package for this specific indentation check.
This removes the last 2197 remaining warnings on Config.in files.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Ricardo: rebase patch to use relative paths passed by the main script,
fix flake8 warnings, add package/Config.* to the list]
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Each line must fit in <tab><2 spaces><62 chars>.
The default width for textwrap.wrap() is 70, so explicit set it to 62.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
These files can benefit from this script to prevent common mistakes when
submitting patches.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The toolchain directory can benefit from this script to prevent common
mistakes when submitting patches.
In order to accomplish this:
Do not ignore anymore files from the toolchain/ directory.
Ignore this symbol:
- BR_LIBC: defined by the buildroot toolchain, used by gcc-final.mk.
Ignore toolchain/toolchain-external/pkg-toolchain-external.mk as it
declares a package infra and not a package itself.
Ignore toolchain/helpers.mk as it contains only helper functions.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This directory can benefit from this script to prevent common mistakes
when submitting patches.
In order to accomplish this:
Do not ignore anymore files from the linux/ directory.
Ignore missing LINUX_EXT_ prefix as the variables for linux extensions
do not use it.
Ignore this symbol:
- LINUX_EXTENSIONS: defined by each linux extension, used by
linux/linux.mk.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The filesystem types can benefit from this script to prevent common
mistakes when submitting patches.
In order to accomplish this:
Do not ignore anymore files from the fs/ directory.
Ignore fs/common.mk as it declares a package infra and not a package itself.
Register the ROOTFS_ as a valid prefix for variables.
Ignore these symbols:
- PACKAGES_PERMISSIONS_TABLE: defined either by packages through
pkg-generic or by filesystem types, used by fs/common.mk;
- SUMTOOL: defined by package mtd, used by filesystem jffs2;
- TARGETS_ROOTFS: defined by filesystem types, used in the main
Makefile.
Keep using loose checks that warn about common mistakes while keep the
code simple.
As a consequence the check functions do not differentiate between
packages and filesystems so the symbol PACKAGE_UBI would not generate a
warning for the ubi filesystem neither the symbol ROOTFS_MTD would
generate a warning for the mtd package. But those kind of mistakes are
not common and are obvious in the code review, unlike typos i.e.
ROOTFS_UBl or PACKAGE_MID that would be hard to see in the code review.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This directory can benefit from this script to prevent common mistakes
when submitting patches.
In order to accomplish this:
Do not ignore anymore files from the boot/ directory.
Ignore boot/barebox/barebox.mk as it declares a package infra and not a
package itself.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
These directories can benefit from this script to prevent common
mistakes when submitting patches.
In order to accomplish this:
Do not ignore anymore files from these directories.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently the script only checks files inside the package/ directory.
Upcoming patches will enable it for other directories.
In order to reliably test for file names, i.e. the Config.in in the base
directory, normalize the path of files to check to a relative path to
the base directory.
Rename the variable that holds the compiled regexp to better represent
its content and rearrange how it is declared to make easy to later add
new directories to check. As a consequence the files that declare
package infra types would not be ignored anymore, so create a new
variable to list the files intree to be ignored during the check. The
same variable will be used by upcoming patches to ignore other files.
Ignore pkg-*.mk and doc-asciidoc.mk since they are package infra files.
In order to not produce weird results when used for files outside the
tree (i.e. in a private br2-external) add an explicit command line
option (-b) that bypasses any checks that would make a file be ignored
by the path that contains it.
When in this out-of-tree mode, the user is responsible for providing a
list of files to check that do not contain files the script does not
understand, e.g. package infra files.
As a result of this patch, besides the known use:
$ ./utils/check-package package/new-package/*
someone with the utils/ directory in the path can now also run:
$ cd package/new-package/
$ check-package *
or
$ check-package -b /path/to/br2-ext-tree/package/staging-package/*
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 3a0c20c530 (scanpypi: add support for Python3) adapted the script
to work with python 3.x, but the shebang still said python2 making it
unlikely to work on systems without python 2.x.
Change it to just 'python' instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
check-package would flag tabs before a backslash ('\t\\'),
two spaces before a backslash (' \\') but would not flag a tab before space
before backslash ('\t \\'), allowing someone to bypass the check.
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A number of autobuilder failures are due to the fact that autobuilder
instances use old distributions, with old SSL certificates, and
therefore wget aborts with an error "The certificate of `xyz.org' is
not trusted.".
In order to avoid such failures that are not very interesting in the
context of the autobuilders, we pass --no-check-certificate to
wget. The integrity of the downloaded files is anyway verified by the
hashes, and this is only meant to be used in the context of
testing/CI, not in production.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
In commit ea9669fffa ("core: kill
DEPENDENCIES_HOST_PREREQ"), the core-dependencies make target was
removed, and is now named just "dependencies".
This broke the utils/genrandconfig script, and this commit intends to
fix that.
Since this script is part of the Buildroot tree, it is provided
together with Buildroot, so we don't need to support the legacy
core-dependencies target. Someone checking out an older Buildroot will
have a working setup, with support/dependencies exposing
core-dependencies and utils/genrandconfig using core-dependencies. The
only broken situation will be between
ea9669fffa and this commit, but that's
not a sufficient reason to add some backward compatibility code.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix these warnings:
E401 multiple imports on one line
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix these warnings:
E129 visually indented line with same indent as next logical line
E302 expected 2 blank lines, found 1
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix these warnings:
E201 whitespace after '['
E202 whitespace before ']'
E501 line too long (138 > 132 characters)
-> isolate the common part of the external toolchain url in a variable
to make the long lines shorter and more readable.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
create_hash_file() used basename(licensefile) when it writes the entry for
the license file in the .hash, which is obviously not correct when license
file is locate in a sub directory.
Instead copy the logic from __create_mk_license() to strip the directory
prefix from the absolute filename instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The script was changed via modernize utility. The only manual
made part was the handling of StringIO.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When generating a random configuration, also check the host
dependencies for that configuration and error out if it fails.
This is mainly intended for the autobuilders, so they don't try to
build a configuration for which the necessary host packages are not
installed.
Instead of erroring out, we could also generate a different random
config. However:
- When called for the autobuilders, the autobuild-run script will
anyway just attempt another build. The only difference is that a
warning will be printed in this autobuild log now. This warning
is in fact quite useful to hint that the autobuilder could benefit
from intalling this additional host package.
- When called manually, the user may in fact want to install the
missing host package and continue with the saved random config.
Fixes:
http://autobuild.buildroot.net/results/d7c/d7c12e873a71fef1e0b5e19cfad45024050614e1http://autobuild.buildroot.net/results/a0a/a0a105c1ec2d0517112b02932a85831d4b597b9fhttp://autobuild.buildroot.net/results/96c/96cc6cedc64c777e993671204809599a1498472a
and many others...
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix these warnings:
E101 indentation contains mixed spaces and tabs
E128 continuation line under-indented for visual indent
E231 missing whitespace after ','
E261 at least two spaces before inline comment
E302 expected 2 blank lines, found 1
E305 expected 2 blank lines after class or function definition, found 1
W191 indentation contains tabs
Ignore these warnings:
E402 module level import not at top of file
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix these warnings:
E202 whitespace before ']'
E203 whitespace before ':'
E302 expected 2 blank lines, found 1
E305 expected 2 blank lines after class or function definition, found 1
E711 comparison to None should be 'if cond is None:'
E741 ambiguous variable name 'l'
F401 'sys' imported but unused
W391 blank line at end of file
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Ignore these warnings:
F401 'lib.ConsecutiveEmptyLines' imported but unused
And remove comments that are not needed anymore.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Depending on how setup.py reads requirements files empty elements can occur.
This patch takes care, that such elements will be ignored and don't crash
the scanpypi script.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Store the list of detected licence files in the main object and
automatically add their sha256 checksums when creating *.hash file.
Bonus: fix wrong indentation.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use spdx_lookup package to compare packages' license file texts
with SPDX database.
This feature is optional.
Bonus: fix wrong indentation.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of limiting it to the package under test, we run it globally.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When package installation fails it is good to know what happened.
Signed-off-by: Alexey Roslyakov <alexey.roslyakov@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Just AUTORECONF = NO is redundant.
Just HOST_AUTORECONF = NO is redundant.
But the combination of AUTORECONF = YES + HOST_AUTORECONF = NO is valid.
So basically for all variables that have inheritance between target and
host, having the host variant of the variable set the variable value
back to its default is correct if the target variable is set.
Instead of increasing complexity of the script to fully detect this
case, ignore the host flag set to its default value as it can be
overriding a non-default value inherited from the equivalent target
flag.
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Reported-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In preparation for the addition of comments in the CSV file listing
toolchain configurations, we filter out such lines when reading the
CSV file in utils/test-pkg.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In preparation for the addition of comments in the CSV file listing
toolchain configurations, we filter out such lines when reading the
CSV file in utils/genrandconfig.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Diffconfig is a simple utility for comparing two configuration files.
See usage in the script for more info.
Borrowed from the Linux kernel source code and adapted to Buildroot.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Default prefix is set to `BR2_` but may be overidden by setting
BR2_PREFIX.
Example usage:
Enable `BR2_PACKAGE_GNUPG`:
./utils/config --package --enable GNUPG
Check state of config option `BR2_PACKAGE_GNUPG`:
./utils/config --package --state GNUPG
y
Enable `BR2_PACKAGE_GNUPG`:
./utils/config --package --disable GNUPG
Set `BR2_TARGET_GENERIC_ISSUE` to "Welcome":
./utils/config --set-str TARGET_GENERIC_ISSUE "Welcome"
Copied from the Linux kernel (4.13-rc6) source code and adapted to
Buildroot.
Thanks to Andi Kleen who is the original author of this script.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
[Arnout: merge the two tr invications]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The DEVELOPERS file lists file patterns, but the get-developers script
only supports getting packages and CPU architectures. Some files are
neither of those, e.g. defconfigs, support files, package infras, ...
Add a '-f' option that allows to give a list of files for which to get
the developer(s).
Note that the DEVELOPERS file contains directories as well as files,
and the directories are not expanded into individual files. Therefore,
we have to use f.startswith(devfile) to match a directory. This assumes
that the directory name ends with /, otherwise 'package/python' would
also match 'package/python-foo'. Since we make sure that directories do
end with / in the DEVELOPERS file, and since false positives are not
much of an issue in this case, this isn't a problem.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When testing a package with test-pkg, it may be useful to override the
set of toolchains used. For example:
- to test with toolchains used in your company;
- to test against a subset that is known to be problematic;
- to use only toolchains you already have available locally when you
have no network access.
Add an option to use an alternate CSV file containing the config
fragments of toolchains to try.
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It is supposedly more robust than just concatenating.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now we have the toolchain config fragments in the buildroot directory
itself, it is no longer necessary to fetch it from the toolchain URL.
The --toolchains-url option is renamed to --toolchains-csv.
The paths in the toolchains_csv file should be either absolute, or
relative to buildrootdir.
After this change, the script should be called from autobuild-run as:
subprocess.call([os.path.join(srcdir, "utils/genrandconfig"),
"-o", outputdir, "-b", srcdir,
"--toolchains-csv", kwargs['toolchains_csv']],
stdout=devnull, stderr=log)
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now we have the toolchain config fragments in the buildroot directory
itself, it is no longer necessary to fetch it from the toolchain URL.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This has a number of side-effects which must be handled.
The lines in minimal.config may be overridden by the random lines added
by amending the configuration, so is_toolchain_usable() shouldn't take
those into account, or indeed the random lines added. Therefore, make
a copy of the config before appending minimal.config and the random
lines. While we're at it, rename the variable to the more appropriate
toolchainconfig.
minimal.config sets BR2_INIT_NONE=y, but we really also want to test
with BR2_INIT_BUSYBOX=y. Therefore, add a random line to use the
busybox init system. We set its probability rather high. The
probabilities of systemd and eudev are increased since they're now
in the else branch of BR2_INIT_BUSYBOX, which halves the probability
that we even get there.
We now also generate configurations without busybox. Previously,
busybox was almost always selected due to BR2_INIT_BUSYBOX=y. Only if
systemd is selected there was a chance to build without busybox.
We now set BR2_SYSTEM_BIN_SH_NONE=y, the other /bin/sh options are
never tested. However, this is not really something that is relevant
to test in the autobuilders.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When outputdir is 'output' (the default), genrandconfig didn't work
correctly because it expects the configfile in outputdir, while
Buildroot puts it in the buildroot directory.
Fix this by explicitly checking if outputdir == buildrootdir/output.
Because abspath is used for both paths, string comparison works
reliably.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The path to the .config file is calculated in several places - replace
it with a single calculation, and pass configfile as an argument
to is_toolchain_usable and fixup_config. These functions also don't
need outputdir any more.
This makes it easier to fix the case when configfile is not in
outputdir.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The --instance argument is just an artifact of genrandconfig's
history as part of autobuild-run. It is much more logical to pass
the output directory and the buildroot directory as arguments, with
sane defaults.
This also allows us to remove the hack of creating a symlink in the
instance directory if it doesn't exist yet.
Note that the default outputdir 'output' doesn't work yet, because in
that case Buildroot will put the config file in the buildroot directory
instead of the output directory. This will be fixed in a follow-up
patch.
After this change, the script should be called from autobuild-run as:
subprocess.call([os.path.join(srcdir, "utils/genrandconfig"),
"-o", outputdir, "-b", srcdir,
"--toolchains-url", kwargs['toolchains_url']],
stdout=devnull, stderr=log)
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This prepares for passing buildrootdir as an argument.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This prepares for passing outputdir as an argument.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The output of genrandconfig is currently very terse, which is annoying
for debugging the script or generally seeing what is going on. Also the
timing information added by log_write isn't very useful when the script
is used stand-alone.
In the new setup, (verbose) output goes to stdout and error output goes
to stderr. Also the "INFO: generate the configuration" message is
eliminated - it should go in the autobuild-run script.
We also add an explicit message when a toolchain can't be used after
the first defconfig, otherwise autobuild-run will just silently
restart.
Note that, since the output of make is no longer redirected to
/dev/null, we get one more message on stderr that will be recorded in
the autobuilder's log file: KCONFIG_SEED=0xXXXXXXXX.
This approach allows us to optimise the error handling to use
exceptions, where appropriate, which can be caught at the top level and
converted to an error message to stderr. This, in turn, allows us to use
subprocess.check_call, which eliminates a lot of conditions.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The SystemInfo class is instantiated globally and passed down to all
functions, but it is really only used in fixup_config. So instead,
instantiate it there.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
kwargs is a left-over from the use of docopt, it's better to use
argparse's Namespace object directly.
In addition, most functions use just one or two fields of args, so
these can just as well be passed directly as arguments to the function.
Particularly for outputdir it doesn't make sense to reconstruct it all
the time.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Warnings fixed:
E731 do not assign a lambda expression, use a def
-> urlopen_closing is defined with a def. urlopen is not used
elsewhere so inlined.
E302 expected 2 blank lines
E501 line too long
-> long lines due to a long string are NOT split
E701 multiple statements on one line (colon)
E722 do not use bare except'
-> use "except Exception", so KeyInterrupt and SystemExit are still
passed. We never intended to catch those.
E741 ambiguous variable name 'l'
-> variable name is replaced with the much more descriptive
toolchains_csv
E271 multiple spaces after keyword
E231 missing whitespace after ','
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Popen is more complicated and more difficult to understand.
check_output raises an exception if the exit code is non-zero, but
that's probably what we want if ldd can't be executed.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This script will be used by the autobuild-run script to generate the
configuration to test. It is put in the utils directory because it can
also be called directly to allow users to test things.
For now, it is a direct copy of the relevant functions from the
autobuild-run script. The only changes are:
- unneeded import statements are removed;
- code/decode wrappers are limited to decode_byte_list;
- __main__ handling is added.
For now, the only supported arguments are the ones needed for
autobuild-run. Follow-up patches will refactor things and also change
the way the script is called. In this version, it can be called from the
autobuild-run script as:
subprocess.call([os.path.join(srcdir, "utils/genrandconfig"),
"-i", str(kwargs['instance']),
"--toolchains-url", kwargs['toolchains_url']],
stdout=log, stderr=log)
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This minimal configuration is also very useful outside test-pkg. In
addition, it will simplify the config merge in a later patch.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
'if __name__ == "__main__"' idiom typically calls main function that
doesn't take any arguments in most cases. We shouldn't pass any tuple to
it.
I've tested the script with python-idna-2.5 and now it works with this
little change.
Signed-off-by: Alexey Roslyakov <alexey.roslyakov@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the stdout and stderr streams are redirected, it is not
immediately obvious when a build failed, even though brmake really exits
with the same error code as make did.
When there is an error, print the exit code after the elapsed time.
Reported-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we check that the filenames in hash lists do not contain
a slash '/' character, because all we are checking so far are the
downloaded archives, and we explicitly need the filename to not contain
a directory component at all.
However, we're soon to also check the hashes of the license files in
packages sources, and those license files may be at any arbitrary
directory-depth in the packages source tree.
[Peter: Remove reference to files with same basename]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Acked-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A few typos sneaked into the new utils readme...
Additionally, I formulated the list of use cases a bit differently.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When getdeveloperlib.parse_developers doesn't find anything, the script
tries sys.exit(1) but sys is not imported.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
scancpan's help text refers to its location, so update it after the
move to utils/.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
After some discussion, we found out that "tools" has the four first
letters identical to the "toolchain" subfolder, which makes it a bit
unpractical with tab-completion. So, this commit renames "tools" to
"utils", which is more tab-completion-friendly.
This has been discussed with Arnout and Yann.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
