Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
kmod uses the completionsdir variable from bash-completions.pc to decide
where to install things. Since DESTDIR is prepended to the install
destination, this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on bash-completions.pc.
Fixes:
- http://autobuild.buildroot.org/results/f8a1f956333062027294e766ff0ddab5c35d5887
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
xapp_xdm uses the appdefaultdir variable from xt.pc to decide where to
install things. Since DESTDIR is prepended to the install destination,
this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on xt.pc.
Fixes:
- http://autobuild.buildroot.org/results/08bcba7d7340f34dc66b5b2ab8fbcfbaee309e37
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
xapp_xditview uses the appdefaultdir variable from xt.pc to decide where
to install things. Since DESTDIR is prepended to the install
destination, this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on xt.pc.
Fixes:
- http://autobuild.buildroot.org/results/af70962c59ca3dd29d85207033125b2e7eda3e81
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
xapp_xfd uses the appdefaultdir variable from xt.pc to decide where to
install things. Since DESTDIR is prepended to the install destination,
this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on xt.pc.
Fixes:
- http://autobuild.buildroot.org/results/ea9884f4d676849d643d53275ebbc8668074a418
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
xapp_xclock uses the appdefaultdir variable from xt.pc to decide where
to install things. Since DESTDIR is prepended to the install
destination, this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on xt.pc.
Fixes:
- http://autobuild.buildroot.org/results/ea028467a981f419c395158c55aa9a6d16e3f2c1
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
xapp_xedit uses the appdefaultdir variable from xt.pc to decide where to
install things. Since DESTDIR is prepended to the install destination,
this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on xt.pc.
Fixes:
- http://autobuild.buildroot.org/results/1b46f950fc0d957d04c0a60a24176d701ff16bd9
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
xapp_xmap uses the appdefaultdir variable from xt.pc to decide where to
install things. Since DESTDIR is prepended to the install destination,
this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on xt.pc.
Fixes:
- http://autobuild.buildroot.org/results/725c20ec9621a9c2d4b94784785bb481ff74f0e7
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is a maintenance release of the current stable WebKitGTK+ version,
which contains security fixes for CVE identifiers: CVE-2018-4437,
CVE-2018-4438, CVE-2018-4441, CVE-2018-4442, CVE-2018-4443, and
CVE-2018-4464. Additionally, it fixes a couple of build failures in
unusual build configurations.
Release notes can be found in the announcement:
https://webkitgtk.org/2018/12/13/webkitgtk2.22.5-released.html
More details on the issues covered by security fixes can be found
in the corresponding security advisory:
https://webkitgtk.org/security/WSA-2018-0009.html
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update to version 2018.11 to resolve the following build failure:
corelib/channel_curl.c: In function ‘channel_map_curl_error’:
corelib/channel_curl.c:298:2: error: duplicate case value
case CURLE_SSL_CACERT:
^
corelib/channel_curl.c:297:2: error: previously used here
case CURLE_PEER_FAILED_VERIFICATION:
^
when building with CONFIG_DOWNLOAD=y. This issue is happening since
the libcurl bump to 7.62.0.
Signed-off-by: Jared Bents <jared.bents@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
lldpd can optionally depend on readline, but readline is never added
to LLDPD_DEPENDENCIES, which this commit fixes.
This was detected using per-package directories.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
1.15.7 contains a number of bugfixes. From the changes file:
*) Bugfix: memory leak on errors during reconfiguration.
*) Bugfix: in the $upstream_response_time, $upstream_connect_time, and
$upstream_header_time variables.
*) Bugfix: a segmentation fault might occur in a worker process if the
ngx_http_mp4_module was used on 32-bit platforms.
https://nginx.org/en/CHANGES
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
xapp_xmag uses the appdefaultdir variable from xt.pc to decide where to
install things. Since DESTDIR is prepended to the install destination,
this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on xt.pc.
Fixes:
- http://autobuild.buildroot.org/results/37dd630639a0d76e8121b3cca9e0e1f305ad620b
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
xapp_oclock uses the appdefaultdir variable from xt.pc to decide where
to install things. Since DESTDIR is prepended to the install
destination, this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on xt.pc.
Fixes:
- http://autobuild.buildroot.org/results/77c57f68039b4490e70a3d15ca6f4b9e945d12e7
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
xapp_xconsole uses the appdefaultdir variable from xt.pc to decide
where to install things. Since DESTDIR is prepended to the install
destination, this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on xt.pc.
Fixes:
- http://autobuild.buildroot.org/results/959986ce1411f14d84da4aafaeb965bf9a847c7c
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
xapp_xload uses the appdefaultdir variable from xt.pc to decide where to
install things. Since DESTDIR is prepended to the install destination,
this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on xt.pc.
Fixes:
- http://autobuild.buildroot.org/results/722c1bdfb3f38a13be7a40793a8df4f0324885f4
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
xapp_xmessage uses the appdefaultdir variable from xt.pc to decide
where to install things. Since DESTDIR is prepended to the install
destination, this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on xt.pc.
Fixes:
- http://autobuild.buildroot.org/results/ca1ce01dfef8b1a9cbb27e444c0c884f37f9cd7c
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
xapp_xclipboard uses the appdefaultdir variable from xt.pc to decide
where to install things. Since DESTDIR is prepended to the install
destination, this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on xt.pc.
Fixes:
- http://autobuild.buildroot.org/results/bbca1f77fc5beb1878c43b1abcad64b8e35a77e6
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
xapp_editres uses the appdefaultdir variable from xt.pc to decide
where to install things. Since DESTDIR is prepended to the install
destination, this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on xt.pc.
Fixes:
- http://autobuild.buildroot.org/results/938a91641c277c905e77779afe2d0e2ce92ed76d
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
xapp_bitmap uses the appdefaultdir variable from xt.pc to decide where
to install things. Since DESTDIR is prepended to the install
destination, this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on xt.pc.
Fixes:
- http://autobuild.buildroot.org/results/44bed7a9251e108f0c3bc8654b757ccc031a1187
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
xapp_xcalc uses the appdefaultdir variable from xt.pc to decide where to
install things. Since DESTDIR is prepended to the install destination,
this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on xt.pc.
Fixes:
- http://autobuild.buildroot.org/results/6d906fc092e86ecf4214a69a5f087efabab4ade8
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
xapp_viewres uses the appdefaultdir variable from xt.pc to decide where
to install things. Since DESTDIR is prepended to the install
destination, this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on xt.pc.
Fixes:
- http://autobuild.buildroot.org/results/71b5fb2b5df30e25dacdef71f7aaddbecbf8bde6
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
xapp_beforelight uses the appdefaultdir variable from xt.pc to decide
where to install things. Since DESTDIR is prepended to the install
destination, this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on xt.pc.
Fixes:
- http://autobuild.buildroot.org/results/164bb80f261f48525de508b5f74321f2fec91cce
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
GCC 8 demands that the size of the string copied by strncpy be smaller
than the size of the destination to keep space for the trailibg '\0'.
This causes a compilation error in pam_tacplus, so add a patch already
sent uptream to fix it.
Fixes:
http://autobuild.buildroot.net/results/da6d150e470046c03c5f7463de045604e15e4a30/
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Execution permissions cause systemd to throw runtime warnings since
systemd service files are essentially a type of configuration file and
are not designed to be executed like init scripts.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libgpgme installs a gpgme-config script, it should be tweaked using
the <pkg>_CONFIG_SCRIPTS mechanism. This is generally useful and is
going to be particularly important with per-package directories.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Set ac_cv_path_WAYLAND_SCANNER to the wayland-scanner in the host
directory otherwise build will fail because libva will use pkgconfig to
find it
Fixes:
- http://autobuild.buildroot.org/results/836d3a7085c576f607b1532d5204a54d6c2c1e66
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump kernel, U-Boot and ATF packages to the NXP imx_4.14.62_1.0.0_beta
release.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
clamav has an optional systemd dependency
Moreover, since the bump to 1.5.3, pkgconf prepends the sysroot to all
absolute paths found in the .pc file. This is correct when the paths
refer to something in STAGING_DIR (e.g. libdir, includedir), but not
when it refers to something used for the target.
clamav uses the systemdsystemunitdir variable from systemd.pc to decide
where to install things. Since DESTDIR is prepended to the install
destination, this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the
systemdsystemunitdir to use explicitly instead of relying on systemd.pc.
Fixes:
- http://autobuild.buildroot.org/results/fe526c60542527112e6441e453b4df5de49242d9
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
libv4l uses the udevdir variable from libudev.pc to decide where
to install things. Since DESTDIR is prepended to the install
destination, this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the udevdir to use
explicitly instead of relying on libudev.pc.
Fixes:
- http://autobuild.buildroot.org/results/597cd814225c2af9b896a1f25f98cdff33fd810a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
bluez5_utils uses the sysconfdir variable from dbus-1.pc to decide where
to install things. Since DESTDIR is prepended to the install
destination, this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the sysconfdir to use
explicitly instead of relying on dbus-1.pc.
Fixes:
- http://autobuild.buildroot.org/results/498e7e368fbb3d69c2f311e3e5bc213e507b8023
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
iwd uses the datadir variable from dbus-1.pc to decide where to install
things. Since DESTDIR is prepended to the install destination, this will
end up in the wrong location.
Until a better solution is found in pkgconf, pass the usbdropdir to use
explicitly instead of relying on dbus-1.pc.
Fixes:
- http://autobuild.buildroot.org/results/2b9e28264248f073cc9973bd4c7a89363ec9c0c3
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
acsccid uses the usbdropdir variable from libpcsclite.pc to decide where
to install things. Since DESTDIR is prepended to the install
destination, this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the usbdropdir to use
explicitly instead of relying on libpcsclite.pc.
Fixes:
- http://autobuild.buildroot.org/results/9dc76478d81ea2469900a4b4aab0e31fee9c4032
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
ccid uses the usbdropdir variable from libpcsclite.pc to decide where to
install things. Since DESTDIR is prepended to the install destination,
this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the usbdropdir to use
explicitly instead of relying on libpcsclite.pc.
Fixes:
- http://autobuild.buildroot.org/results/4d4c1ba7f5d00d1b927ac01ef9851468abfbdff2
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Definitions of POLLWRNORM, POLLWRBAND and POLLREMOVE in xtensa linux
kernel are non-standard. Provide bits/poll.h with correct values for
these constants for uclibc-ng.
This fixes the following strace build errors:
In file included from xlat/pollflags.h:4:0,
from poll.c:34:
./static_assert.h:40:24: error: static assertion failed: "POLLWRBAND != 0x0100"
# define static_assert _Static_assert
^
xlat/pollflags.h:75:1: note: in expansion of macro ‘static_assert’
static_assert((POLLWRBAND) == (0x0100), "POLLWRBAND != 0x0100");
^~~~~~~~~~~~~
./static_assert.h:40:24: error: static assertion failed: "POLLREMOVE != 0x0800"
# define static_assert _Static_assert
^
xlat/pollflags.h:117:1: note: in expansion of macro ‘static_assert’
static_assert((POLLREMOVE) == (0x0800), "POLLREMOVE != 0x0800");
^~~~~~~~~~~~~
Fixes:
http://autobuild.buildroot.net/results/5a0112b7a2c81fa5253c9adc93efe415256cd811
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When one of BR2_PACKAGE_FFTW_PRECISION_* is enabled, liquid-dsp links
against fftw3f, fftw3 or fftw3l, but forgets to add the fftw package
in its dependencies. It works fine in practice because "fftw" is
before "liquid-dsp" in the alphabetic ordering, but building with
"make liquid-dsp" or with per-package directory causes a build
failure.
Fix that by adding the missing dependencies.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Reviewed-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The sdl2_net configure script uses pkg-config to finx sdl2. If it
doesn't find pkg-config, it tries to locate sdl2-config, and defaults
to /usr/bin/sdl2-config, which causes the build to fail with:
arm-linux-gcc: ERROR: unsafe header/library path used in cross-compilation: '-I/usr/include/SDL2'
Fix this by adding host-pkgconf to the dependencies of sdl2_net. We
could have added the right autoconf cache variable to tell the
configure script where sdl2-config is located, but since pkg-config is
tried first, let's use that.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 1f0beaf9a8 ("intel-microcode:
bump to version 20180807a") introduced the use of "install -D -t" to
the intel-microcode package. The intent is that install will create
the full destination directory, including all components leading to
it, before copying the files.
Unfortunately, "install -D -t" is only supported since coreutils since
v8.23. Several of the build systems we support have older coreutils
versions, such as Debian 7, which uses coreutils 8.13. Ubuntu 14.04
also doesn't have a recent enough coreutils.
So let's create the directory explicitly first, and then use a more
regular "install -t".
Fixes:
http://autobuild.buildroot.net/results/aa44f9ff90f296f886be6309b3355ed075494fb2/
Note: the "gzip: stdout: Broken pipe" messages in those failures seem
unrelated. We have been able to reproduce the installation failure
without those "Broken pipe" issues, and we have not been able to
reproduce those "Broken pipe" problems.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The lua-cqueues build system uses m4 during the build:
cd /home/test/autobuild/run/instance-1/output/build/lua-cqueues-rel-20161215/src && m4 /home/test/autobuild/run/instance-1/output/build/lua-cqueues-rel-20161215/src/errno.c.m4 >| /home/test/autobuild/run/instance-1/output/build/lua-cqueues-rel-20161215/src/errno.c.tmp
Therefore, the package should depend on host-m4. This has been
detected using per-package directory support, but a minimal defconfig
with just lua and lua-cqueues on a system that doesn't have m4
installed system-wide also exhibits the issue.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
