Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now when ARC toolchain also supports NPTL both Qt's Script and WebKit
modules could be successfully built and then executed on ARC.
[Thomas: fix alphabetic ordering.]
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It is often difficult to know exactly when make will expand the
variable, and usually it can only be expanded after the dependencies
have been built (e.g. pkg-config or the .pc file). Using a backtick
instead makes it very clear that it will be expanded only while
executing the command.
This change is useful for two cases:
1. The per-package staging (and host) directory will be created as part
of the configure step, so any $(shell ...) variable that is used in
the configure step will fail because the directory doesn't exist
yet.
2. 'make printvars' evaluates the variables it prints. It will therefore
trigger a lot of errors from missing .pc files and others. The
backticks, on the other hand, are not expanded, so with this change
the output of 'make printvars' becomes clean again.
This commit contains only the easy changes: replace $(shell ...) with
`...`, and also replace ' with " where needed. Follow-up commits will
tackle the more complicated cases that need additional explanation.
After this change, the following instances of $(shell ...) will remain:
- All assignments that use :=
- All variables that are used in make conditionals (which don't expand
the backticks).
- All variables that only refer to system executables and make
variables that don't change.
- The calls to check-host-* in dependencies.mk, because it is eval'ed.
[Original patch by Fabio Porcedda, but extended quite a bit by Arnout.]
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Even though Qt4 could be built for ARC cores during execution
of Qt4 applications on target issues will happen.
Most notable is will be segfaults due to unaligned access to data,
especially in WebKit applications.
Both patches were submitted upstream and if they ever get accepted
they should be removed from Buildroot.
https://codereview.qt-project.org/#/c/112667https://codereview.qt-project.org/#/c/112668
[Thomas: renumber patches.]
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Anton Kolesov <akolesov@synopsys.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Building webkit with the SuperH Sourcery toolchain fails with an
assertion in binutils, so let's not allow to select webkit with this
toolchain. We do not need to worry about reverse dependencies, since
we use the existing BR2_PACKAGE_QT_ARCH_SUPPORTS_WEBKIT symbol to add
this new dependency.
Fixes:
http://autobuild.buildroot.net/results/508cdeb67f272b61209f331ab7b990cb56f30817/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
fix:
http://autobuild.buildroot.net/results/ce8/ce89ad1ca6aec9f7bb5549301bf4c0dcba9e0e37/
qtwebkit includes qscript headers.
For packages like python-pyqt if webkit is available but not qscript, the
compilation fails with :
buildroot/output/build/python-pyqt-4.11.3/sip/QtWebKit/qwebframe.sip:79:0:
../../../host/usr/i686-buildroot-linux-gnu/sysroot/usr/include/QtWebKit/qwebframe.h:28:36:
fatal error: QtScript/qscriptengine.h: No such file or directory
This problem is not seen with Qt compilation because some relative include
directly from sources are added.
[Peter: also adjust comment]
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
postgresql currently does not build in BR2_STATIC_LIBS=y
configurations, and since there is little interest in using such a big
piece of software in statically linked configuration, this commit
makes postgresql depends on !BR2_STATIC_LIBS.
Fixes:
http://autobuild.buildroot.net/results/f9ed96d22e91cdba9ad92c4d4ea52e422bf1f1c9/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 7619aba496.
This change causes a number of build issues with poppler / pinentry /
python-pyqt and Qt itself on various architectures, so lets revert it for
now and rework it for the 2015.08 cycle.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If QT_COORD_TYPE_DOUBLE is forced and hard float is used, Qt compilation
breaks because it can't find hard coded operations on double.
Moreover, QT_COORD_TYPE is float only if QT_NO_FPU is set.
(cf src/corelib/global/qglobal.h)
So, we can safely make the QT_COORD_TYPE_DOUBLE option depend on
BR2_SOFT_FLOAT.
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
On ARM-based platforms, qreal is a typedef for float for performance
reasons. But we may want a double precision anyway.
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that IPv6 is mandatory remove package dependencies and conditionals
for it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
buildroot references powerpc64 little endian as "powerpc64le" and not
"powerpc64el". The typo in the supported architectures list caused this
package to be unavailable for powerpc64 little endian.
Signed-off-by: Erico Nunes <erico.nunes@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add upstream patch (see [1], [2]) which fixes a bug introduced by previous
patch '0007-configure-add-psql_config-option.patch'.
[1] https://bugreports.qt.io/browse/QTBUG-45463
[2] https://codereview.qt-project.org/110041
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that largefile is mandatory removes package dependencies and
conditionals.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add qt4 '-psql_config' configure option and use it to set
pg_config path in configure step instead of legacy PSQL_LIBS
environment variable.
Fixes [1]:
PostgreSQL support cannot be enabled due to functionality tests!
Turn on verbose messaging (-v) to ./configure to see the final report.
If you believe this message is in error you may use the continue
switch (-continue) to ./configure to continue.
make: *** [/ssd1/thomas/autobuild/instance-0/output/build/qt-4.8.6/.stamp_configured] Error 101
Patch suggested upstream ([2]).
[1] http://autobuild.buildroot.net/results/1e9/1e949d4593836bc45a55e071cc54ff9c00fad8ae
[2] https://codereview.qt-project.org/108345
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Autogenerated from rename-patch.py (http://patchwork.ozlabs.org/patch/403345)
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Qt has some assembly that doesn't exist in thumb1 mode.
So, force arm mode for Qt
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As indicated by QtDeclarative.pc, QtDeclarative needs QtSql.
It builds fine without it, but then you get a run-time error.
So add QtSql to the QtDeclarative depends-on list.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
There are two possible configurations for Qt4 installation: standard
(with X11) and embedded (for framebuffer). Both configurations cannot be
used together for one installation and some options are specific to one
configuration or the other.
Add a choice to select the standard or the embedded installation to add
X11 support.
The integration is done in order to make maximum use of the current
configuration logic, for example by using the same mkspecs files.
Signed-off-by: Hadrien Boutteville <hadrien.boutteville@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently in Buildroot we have a BR2_PACKAGE_QT_ARCH_SUPPORTS_WEBKIT
variable indicating which architectures support Qt Webkit. We also make
Qt Script depending on that variable, so we are assuming that Qt Script
is supported for exactly the same architectures which support Qt Webkit,
and that's not true.
For instance, Qt Webkit is not supported for MIPS64 when
using the n32 ABI, but Qt Script is actually supported. So, if we make
BR2_PACKAGE_QT_ARCH_SUPPORTS_WEBKIT depending on !BR2_MIPS_NABI32 we
will also disable Qt Script, because as I said before, Qt Script depends
on BR2_PACKAGE_QT_ARCH_SUPPORTS_WEBKIT, and we don't want that because
Qt Script works.
We fix this by creating another variable called
BR2_PACKAGE_QT_ARCH_SUPPORTS_SCRIPT to state which architectures support
Qt Script, so now we can differentiate them from the ones supporting Qt
Webkit.
Related:
http://lists.busybox.net/pipermail/buildroot/2014-November/112605.html
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since a while, the semantic of BR2_PREFER_STATIC_LIB has been changed
from "prefer static libraries when possible" to "use only static
libraries". The former semantic didn't make much sense, since the user
had absolutely no control/idea of which package would use static
libraries, and which packages would not. Therefore, for quite some
time, we have been starting to enforce that BR2_PREFER_STATIC_LIB
should really build everything with static libraries.
As a consequence, this patch renames BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS, and adjust the Config.in option accordingly.
This also helps preparing the addition of other options to select
shared, shared+static or just static.
Note that we have verified that this commit can be reproduced by
simply doing a global rename of BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS plus adding BR2_PREFER_STATIC_LIB to Config.in.legacy.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Qt Webkit Module uses pthread_getattr_np() which is implemented in
toolchains with NPTL. Otherwise the compilation will fail showing this
error message:
wtf/StackBounds.cpp: In member function ‘void
WTF::StackBounds::initialize()’:
wtf/StackBounds.cpp:172:38: error: ‘pthread_getattr_np’ was not declared
in this scope
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Qt Script Module uses pthread_getattr_np() which is implemented in
toolchains with NPTL. Otherwise the compilation will fail showing this
error message:
../3rdparty/javascriptcore/JavaScriptCore/runtime/Collector.cpp: In
function ‘void* QTJSC::currentThreadStackBase()’:
../3rdparty/javascriptcore/JavaScriptCore/runtime/Collector.cpp:692:42:
error: ‘pthread_getattr_np’ was not declared in this scope
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Buildroot coding style defines one space around make assignments and
does not align the assignment symbols.
This patch does a bulk fix of offending packages. The package
infrastructures (or more in general assignments to calculated variable
names, like $(2)_FOO) are not touched.
Alignment of line continuation characters (\) is kept as-is.
The sed command used to do this replacement is:
find * -name "*.mk" | xargs sed -i \
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*$#\1 \2#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*\([^\\]\+\)$#\1 \2 \3#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*\([^\\ \t]\+\s*\\\)\s*$#\1 \2 \3#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\(\s*\\\)#\1 \2\3#'
Brief explanation of this command:
^\([A-Z0-9a-z_]\+\) a regular variable at the beginning of the line
\([?:+]\?=\) any assignment character =, :=, ?=, +=
\([^\\]\+\) any string not containing a line continuation
\([^\\ \t]\+\s*\\\) string, optional whitespace, followed by a
line continuation character
\(\s*\\\) optional whitespace, followed by a line
continuation character
Hence, the first subexpression handles empty assignments, the second
handles regular assignments, the third handles regular assignments with
line continuation, and the fourth empty assignments with line
continuation.
This expression was tested on following test text: (initial tab not
included)
FOO = spaces before
FOO = spaces before and after
FOO = tab before
FOO = tab and spaces before
FOO = tab after
FOO = tab and spaces after
FOO = spaces and tab after
FOO = \
FOO = bar \
FOO = bar space \
FOO = \
GENIMAGE_DEPENDENCIES = host-pkgconf libconfuse
FOO += spaces before
FOO ?= spaces before and after
FOO :=
FOO =
FOO =
FOO =
FOO =
$(MAKE1) CROSS_COMPILE=$(TARGET_CROSS) -C
AT91BOOTSTRAP3_DEFCONFIG = \
AXEL_DISABLE_I18N=--i18n=0
After this bulk change, following manual fixups were done:
- fix line continuation alignment in cegui06 and spice (the sed
expression leaves the number of whitespace between the value and line
continuation character intact, but the whitespace before that could have
changed, causing misalignment.
- qt5base was reverted, as this package uses extensive alignment which
actually makes the code more readable.
Finally, the end result was manually reviewed.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Cc: Yann E. Morin <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 93917b6980 (2013.11) introduced
the installation of the binary .qm translation files, unconditionally.
However, the installed size is very large for some embedded systems
(about 8 MB), and they are not needed in many cases.
In order to avoid such a waste of storage space, commit
2ff329412f (2014.08) made this
installation an option that could be disabled. For backward
compatibility, the option default was set to yes.
Given the size of these files, and that they had never been installed
by Buildroot versions before 2013.11, change the default to not
installing them.
Interested users can still activate it as needed.
Also update and improve the help text.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Danomi Manchego <danomimanchego123@gmail.com>
Cc: Danomi Manchego <danomimanchego123@gmail.com>
Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 93917b6980 introduced the
installation of the binary .qm translation files, unconditionally.
This patch introduces an option to disable this behavior, saving
almost 8MB of space.
[Thomas: rename option to BR2_PACKAGE_QT_TRANSLATION_FILES instead of
BR2_PACKAGE_QT_INSTALL_TRANSLATION_FILES, and move its definition
around the installation of examples/demos rather than in the middle of
the options for the different modules.]
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When building Qt in a minimal configuration, a couple of Qt modules
(QtNetwork, QtSql, QtTest and QtXml) are built in addition to QtCore,
so they are installed in the sysroot but they are not copied into the
target tree.
Among these modules that could be built but optionally installed, only
QtTest had no option to allow being installed in the target fs.
Thus, programs linking against QtTest would successfully build, but
would miserably fail at runtime due to this missing dependency.
So far, the only package triggering this issue is OpenCV (the highgui
module built with Qt support).
A followup patch will add this missing dependency in OpenCV using this
new option.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since qt's version has been bumped to 4.8.6 we can add support for
webkit on MIPS64 architectures (both big and little endian). It wasn't
possible on 4.8.5 because QtScript wasn't supported on MIPS64, but that
has been fixed on 4.8.6.
With reference to:
https://codereview.qt-project.org/#change,73022
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: Markos Chandras <Markos.Chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The basic rule for a package is to have its options named
after the package name. There is no reason this should not
also be the case for virtual packages.
Besides, this will allow us to switch libegl to use the
soon-to-be-introduced virtual-package infrastructure.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Mike Zick <minimod@morethan.org>
Cc: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The basic rule for a package is to have its options named
after the package name. There is no reason this should not
also be the case for virtual packages.
Besides, this will allow us to switch libgles to use the
soon-to-be-introduced virtual-package infrastructure.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Mike Zick <minimod@morethan.org>
Cc: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Acked-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
All of qt.mk's target installs ensure that their destinations exist,
except for /usr/lib. So do the same for /usr/lib, for consistency,
and in case some combination of custom fs skeleton plus dependency
on Qt leads to installing without a pre-existing /usr/lib directory.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
