Python 2 is EOL sice 2020 [1], it's still available on distros, but may not
be installed by default (as being replaced by python3).
Thus remove compatibility imports:
from __future__ import print_function
from __future__ import absolute_import
Tested with python3 -m py_compile.
[1] https://www.python.org/doc/sunset-python-2/
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When selected, host-ccache is a dependency of almost all packages.
As such, it clutters the dependency graph uselessly.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Reviewed-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now that we can get the whole dependency tree from make, use it to
speed up things considerably.
So far, we had three functions to get the dependencies information:
get_depends(), get_rdepends(), and, somehow unrelated, get_version().
Because of the way %-show-{,r}depends works, getting the dependency tree
was expensive, the three functions all took a set of packages for which
to get the dependencies, in an attempt to limit the time it took to get
that tree, but we still had to call these functions iteratively, until
they returned no new dependency. This was pretty costly.
Now, getting the tree is much, much less costly, and we can get the
whole tree as cheaply as we previously got only the first-level
dependencies.
Furthermore, we can now also get the version information at the same
time, and that also brings in whether the package is virtual or not,
target or host.
So, we drop all three helper functions, and replace them with a single
one that returns all that information in one go: full dependency trees
(direct and reverse), per-package type, and per-package version.
Note: since commit 2d29fd96a (pkg-virtual: remove VERSION/SOURCE),
virtual packages are no longer reported as having a 'virtual' version,
so have since been displayed as regular packages in the graphs. Although
noone complained, this patch incidentally restores the initial
behaviour, and virtual packages are now correctly displayed as such
again.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We we simplify the dependency graph, we try to remove so-called
mandatory dependencies from each package, and for each mandatory that
was thus removed, reattach it to the root-package of the graph.
This was made so that mandatory dependencies (which are dependencies of
all packages, or at least of a lot of packages) do not clutter the
dependency graph, but that they are still shown in the graph, as
dependencies of the root package.
However, these mandatory dependencies are only _direct_ dependencies.
As such, it does not make sense to reattach a mandatory dependency when
doing a reverse graph. Worse, it can actually be incorrect.
For example, 'skeleton' is a mandatory dependency, and as such is
removed from all packages. But when doing a reverse graph, skeleton is
now in the dependency chain of, e.g. skeleton-init-none; it should then
not be removed.
In short: the notion of mandatory dependencies does not make sense in
the case of a reverse graph.
Consequently, skip over the mandatory dependency removal when doing a
reverse graph.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When host-gzip is needed, it is a mandatory dependency of all packages.
As such, drawing the dependency lines toward host-gzip would uselessly
clutter the graph.
So, like for the skeleton, host-skeleton, and host-tar, we cut the
dependency chains toward host-gzip.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When host-tar is needed, it is a mandatory dependency of all packages.
As such, drawing the dependency lines toward host-tar would uselessly
clutter the graph.
So, like for the skeleton and host-skeleton, we cut the dependency chains
toward host-tar.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
host-skeleton is a dependency of almost all packages, except a very few.
As such, it clutters the dependency graph uselessly.
Do with it as we do for the skeleton: cut the dependency chains.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some times, multiple dependency graphs for a set of packages (mostly
the application-level packages for the project) are included in reports
(e.g. delivery notes). Repeating the mandatory dependencies on all
those graphs is useless and clutters the important dependencies.
When we had only two such mandatory dependencies (toolchain, skeleton),
it was manageable to list them as manual exclusions:
-x toolchain -x skeleton
But we now have quite a few such dependencies, and it becomes a bit more
cumbersome to manage, not counting the ones we may add in the future.
Add an option to exclude all those mandatory dependencies, to generate
neat graphs.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The current graph-depends implementation filters out a number of
"mandatory" dependencies that all packages have: dependency on
"toolchain" and dependency on "skeleton".
Despite this filtering, in full graph dependencies, "toolchain" and
"skeleton" are still shown, because they are target packages, and
therefore appear in the result of "make show-targets". Thanks to this,
they will be visible as dependencies of the "ALL" node, which is the
root of the dependency tree.
However, as we are going to introduce host-skeleton as a "mandatory
dependency" to be filtered out, this is no longer going to work.
This commit adjusts the remove_extra_deps() function to ensure that
when a mandatory dependency is removed, this dependency exists between
the root of the dependency tree and the mandatory dependency.
This issue was noticed by Yann E. Morin, and this commit provides a
different implementation than what Yann proposed in
https://patchwork.ozlabs.org/patch/910453/.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- list mandatory deps before removing them
- fix flake8 warnings
]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This array will be re-used in another function in a follow-up commit,
so it makes sense to factor it out.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The remove_extra_deps() function removes dependencies that we are not
interested in seeing in the dependency graph. It does this for all
packages, except the 'all' package, which on full dependency graphs is
the root of the tree.
However, this doesn't take into account package-specific dependency
graphs (i.e make <pkg>-graph-depends) where the root is not 'all', but
'<pkg>'. Due to this, dependencies on "mandatory deps" were not
visible at all, i.e the toolchain package (and its dependencies) and
the skeleton package (and its dependencies) were not displayed in
package-specific dependency graphs.
To fix this, we use the existing rootpkg variable instead of
hardcoding 'all'.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, we avoid drawing the dependencies that we call 'target
exceptions', becasue they initially were returned by 'show-targets',
when they in fact were not really packages and thus should not be on
the graph.
However, those two exceptions have no longer been reported in the output
of show-targets since we merged very old initial top-level parallel
build way back in 2014, with commit a24877586a (Makefile: add support
for top-level parallel make), where they had been converted into purely
internal rules.
4 years have passed, we can now drop those exceptions from the
graph-depends script.
This concludes the cleanup initiated three years ago with commit
0b32791f00 (graph-depends: remove absent targets from
TARGET_EXCEPTIONS).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Graphviz' dot utility does not like nodes which names does not start
with an ^[[:alpha:]], i.e. 18xx-ti-utils would cause grievance:
Warning: syntax ambiguity - badly delimited number '18x' in line 4 [...]/graph-depends.dot splits into two tokens
Warning: syntax ambiguity - badly delimited number '18x' in line 5 [...]/graph-depends.dot splits into two tokens
Warning: syntax ambiguity - badly delimited number '18x' in line 6 [...]/graph-depends.dot splits into two tokens
Warning: syntax ambiguity - badly delimited number '18x' in line 7 [...]/graph-depends.dot splits into two tokens
Prefix nodes with an underscore to fix that.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
graph-depends currently spits out a graph in .dot format. However, as
part of the upcoming introduction of <pkg>-show-recursive-depends and
<pkg>-show-recursive-rdepends, we need graph-depends to be able to
display a flat list.
Signed-off-by: George Redivo <george.redivo@datacom.ind.br>
[Thomas:
- Rebase on top of graph-depends changes
- Do not display the package name itself in the list, only its
dependencies (or reverse dependencies)
- Display the result on a single line, instead of one package per
line, in order to match what <pkg>-show-depends and
<pkg>-show-rdepends are doing today.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This will be useful for the upcoming recursive show-depends and
show-rdepends features.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Instead of hardcoded sys.stderr.write() calls. No functional change, but
allows us to easily implement a quiet option.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The graph-depends was not very consistent in colors vs. colours: some
parts were using colours, some parts were using colors.
Let's settle on the US spelling, colors.
This change the user-visble option --colours to --colors, but it is
unlikely that a lot of users customize the colors through
BR2_GRAPH_DEPS_OPTS, so this user interface change is considered
reasonable.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The graph-depends script had no main() function, and the main code was
actually spread between the function definitions, which was a real
mess.
This commit moves the global code into a main() function, which allows
to more easily follow the flow of the script. The argument parsing
code is moved into a parse_args() function.
Most of the global variables are removed, and are instead passed as
argument when appropriate. This has the side-effect that the
print_pkg_deps() function takes a lot of argument, but this is
considered better than tons of global variables.
The global variables that are removed are: max_depth, transitive,
mode, root_colour, target_colour, host_colour, outfile, dict_deps,
dict_version, stop_list, exclude_list, arrow_dir.
The root_colour/target_colour/host_colour variables are entirely
removed, and instead a single colours array is passed, and it's the
function using the colors that actually uses the different entries in
the array.
The way the print_attrs() function determines if we're display the
root node is not is changed. Instead of relying on the package name
and the mode (which requires passing the root package name, and the
mode), it relies on the depth: when the depth is 0, we're at the root
node.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix these warnings:
E122 continuation line missing indentation or outdented
E127 continuation line over-indented for visual indent
E128 continuation line under-indented for visual indent
E202 whitespace before ']'
E221 multiple spaces before operator
E225 missing whitespace around operator
E231 missing whitespace after ','
E302 expected 2 blank lines, found 1
E305 expected 2 blank lines after class or function definition, found 1
E502 the backslash is redundant between brackets
E713 test for membership should be 'not in'
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
pkgutil.py is also part of Python itself. Placing pkgutil.py as is
in a folder with other scripts that require original pkgutil will
break them. This is the case with scanpypi. So rename pkgutil.py
to brpkgutil.py to avoid naming collision.
Fixes: https://bugs.busybox.net/show_bug.cgi?id=9766
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The use of a 'rule' variable that can contain 'show-depends' or
'show-rdepends' is not logical if get_depends is considered as a reusable
function from various scripts. The name of these rules are too much an
implementation detail.
Therefore, split the existing get_depends into two separate functions
get_depends and get_rdepends, while keeping code duplication to a minimum.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Functions to obtain the version and dependencies of a package from Python
can be useful for several scripts. Extract this logic out of graph-depends
into pkgutil.py.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: remove shebang from pkgutil.py, noticed by Yann E. Morin.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Function get_depends was recently changed to support both normal
dependencies as reverse dependencies, via a global variable 'rule' that
equals 'show-depends' or 'show-rdepends'.
As a subsequent function will extract this function get_depends to a
separate file, the use of globals is problematic.
Instead, pass the global as an argument.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we can dump the reverse dependencies of a package, add the
ability to graph those.
It does not make sense to do a full reverse graph, as it would be
semantically equivalent to the direct graph. So we only provide a
per-package reverse graph.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Make graph-depends script opening the output file in text mode since
only ascii characters will be written.
This change fixes the following error occuring when the default host
python interpreter is python3:
make: Entering directory '/opt/buildroot'
Getting targets
Getting dependencies for ['toolchain-external', 'toolchain', 'busybox', ...]
Getting dependencies for ['host-python3', 'host-pkgconf', 'host-gettext', ...]
Getting dependencies for ['host-libxml2', 'host-swig', 'host-m4', ...]
Getting version for ['toolchain-external', 'toolchain', 'busybox', ...]
Traceback (most recent call last):
File "/opt/buildroot/support/scripts/graph-depends", line 425, in <module>
outfile.write("digraph G {\n")
TypeError: a bytes-like object is required, not 'str'
Makefile:807: recipe for target 'graph-depends' failed
make[1]: *** [graph-depends] Error 1
Makefile:84: recipe for target '_all' failed
make: *** [_all] Error 2
make: Leaving directory '/opt/buildroot'
While with python2, adding 'b' to the openning mode has no effect on
Linux (c.f. [2]), the above error is expected with python3 (c.f. [1]).
Therefore, just open the outfile in default (i.e. text) mode.
[1] https://docs.python.org/3/library/functions.html#open
[2] https://docs.python.org/2/library/functions.html#open
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Just like the --stop-on and --exclude options allow to stop on or
exclude virtual packages from the list by passing the "virtual" magic
value, this commit extends the graph-depends logic to support a "host"
magic value for --stop-on and --exclude. This will allow to draw the
graph by stopping on host packages, or by excluding host packages.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: minor code beautification suggested by Yann E. Morin.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The condition to determine if a virtual package should be excluded
from the list due to "virtual" being passed in --exclude is under a
loop iterating over each entry of the exclude_list, but it doesn't use
the iterator of this list.
Indeed, the condition contains:
"virtual" in exclude_list
which checks automatically if "virtual" was passed in the list. Due to
this, there is no need for this check to be within the "for p in
exclude_list" iteration. This commit fixes that by moving the check
outside of the loop.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add an option to graph-depends to only do the dependency checks and not
generate the dot program.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, if there is a circular dependency in the packages, the
graph-depends script just errors out with a Python RuntimeError which is
not caught, resulting in a very-long backtrace which does not provide
any hint as what the real issue is (even if "RuntimeError: maximum
recursion depth exceeded" is a pretty good hint at it).
We fix that by recursing the dependency chain of each package, until we
either end up with a package with no dependency, or with a package
already seen along the current dependency chain.
We need to introduce a new function, check_circular_deps(), because we
can't re-use the existing ones:
- remove_mandatory_deps() does not iterate,
- remove_transitive_deps() does iterate, but we do not call it for the
top-level package if it is not 'all'
- it does not make sense to use those functions anyway, as they were
not designed to _check_ but to _act_ on the dependency chain.
Since we've had time-related issues in the past, we do not want to
introduce yet another time-hog, so here are timings with the circular
dependency check:
$ time python -m cProfile -s cumtime support/scripts/graph-depends
[...]
28352654 function calls (20323050 primitive calls) in 87.292 seconds
Ordered by: cumulative time
ncalls tottime percall cumtime percall filename:lineno(function)
1 0.012 0.012 87.292 87.292 graph-depends:24(<module>)
21 0.000 0.000 73.685 3.509 subprocess.py:473(_eintr_retry_call)
7 0.000 0.000 73.655 10.522 subprocess.py:768(communicate)
7 73.653 10.522 73.653 10.522 {method 'read' of 'file' objects}
5/1 0.027 0.005 43.488 43.488 graph-depends:164(get_all_depends)
5 0.003 0.001 43.458 8.692 graph-depends:135(get_depends)
1 0.001 0.001 25.712 25.712 graph-depends:98(get_version)
1 0.001 0.001 13.457 13.457 graph-depends:337(remove_extra_deps)
1717 1.672 0.001 13.050 0.008 graph-depends:290(remove_transitive_deps)
9784086/2672326 5.079 0.000 11.363 0.000 graph-depends:274(is_dep)
2883343/1980154 2.650 0.000 6.942 0.000 graph-depends:262(is_dep_uncached)
1 0.000 0.000 4.529 4.529 graph-depends:121(get_targets)
2883343 1.123 0.000 1.851 0.000 graph-depends:246(is_dep_cache_insert)
9784086 1.783 0.000 1.783 0.000 graph-depends:255(is_dep_cache_lookup)
2881580 0.728 0.000 0.728 0.000 {method 'update' of 'dict' objects}
1 0.001 0.001 0.405 0.405 graph-depends:311(check_circular_deps)
12264/1717 0.290 0.000 0.404 0.000 graph-depends:312(recurse)
[...]
real 1m27.371s
user 1m15.075s
sys 0m12.673s
The cumulative time spent in check_circular_deps is just below 0.5s,
which is largely less than 1% of the total run time.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, graph-depends outputs the dotfile program to stdout, and uses
stderr to trace the dependencies it is currently looking for.
Redirection was done because the output was directly piped into the dot
program to generate the final PDF/SVG/... dependency graph, but that
meant that an error in the graph-depends script was never caught
(because shell pipes only return the final command exit status, and an
empty dot program is perfectly valid so dot would not complain).
Add an option to tell graph-depends where to store the generated dot
program, and keep stdout as the default if not specified.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Samuel Martin <s.martin49@gmail.com>
[Thomas: rename metavar from DOT_FILE to OUT_FILE for consistency with
the rest of the new option naming.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For large configurations, the execution time of
remove_transitive_deps() becomes really high, due to the number of
nested loops + the is_dep() function being recursive.
For an allyespackageconfig, the remove_extra_deps() function takes 334
seconds to execute, and the overall time to generate the .dot file is
6 minutes and 39 seconds. Here is a timing of the different
graph-depends steps and the overall execution time:
Getting dependencies: 42.5735 seconds
Turn deps into a dict: 0.0023 seconds
Remove extra deps: 334.1542 seconds
Get version: 22.4919 seconds
Generate .dot: 0.0197 seconds
real 6m39.289s
user 6m16.644s
sys 0m8.792s
By adding a very simple cache for the results of is_dep(), we bring
down the execution time of the "Remove extra deps" step from 334
seconds to just 4 seconds, reducing the overall execution time to 1
minutes and 10 seconds:
Getting dependencies: 42.9546 seconds
Turn deps into a dict: 0.0025 seconds
Remove extra deps: 4.9643 seconds
Get version: 22.1865 seconds
Generate .dot: 0.0207 seconds
real 1m10.201s
user 0m47.716s
sys 0m7.948s
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Gustavo Zacarias <gustavo.zacarias@free-electrons.com>
[yann.morin.1998@free.fr:
- rename is_dep() to is_dep_uncached(), keep existig code as-is
- add is_dep() as a cached-version of is_dep_uncached()
- use constructs more conform with 2to3
- use exceptions (EAFP) rather than check-before-use (LBYL) to be more
pythonist; that even decreases the duration yet a little bit more!
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
skeleton being a mandatory dependency, we don't want all our packages to
have a link back to that node, the graph would be awful.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For clarity, this commit renames the TARGETS variable to the more
meaningful PACKAGES variable. Indeed, only packages (handled by one of
the package infrastructures) should be listed in this variable, and
not other random non-package targets.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Like for --stop-on, make --exclude recognise the keyword 'virtual',
to stop on virtual packages (as explained in the help...).
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Similar to --stop-on, but also omits the package from the graph.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Francois Perrad <fperrad@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Francois Perrad <fperrad@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a new option to graph-depends, that users can set to stop the graph
on a specific (set of) package(s).
This accepts any actual package name, or the 'virtual' keyword to stop
on virtual packages.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Francois Perrad <fperrad@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Most of targets listed in TARGET_EXCEPTIONS these days are long
gone, so why still keep them?
Most of those targets were removed in this commit:
http://git.buildroot.net/buildroot/commit/?id=02b88600312554bf166f6cfd71f7f2ede783096a
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
virtual packages are found by their version,
so we retrieve the version of all packages
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It hides any error messages reported by make.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Tested-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The graph-depends script calls make. If the outer make was called
recursively, or if it was called with '-C <somedir>', then the
environment will contain "MAKEFLAGS=w --". Therefore, the recursive
make prints 'Entering' and 'Leaving' messages, which clobbers the
output for dot.
To avoid this, add "--no-print-directory" to the recursive make
arguments. Since we require GNU make 3.81, we can be sure that this
option is available.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch is the result of 2to3.
In addition, universal_newlines=True is added to the Popen calls. In
python3, this makes sure that the output is decoded so that we get a
string instead of a buffer object.
Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The transitive dependencies make the graphs barely readable for large
configs, with a large number of packages.
So, just switch to not drawing the transitive dependencies by default.
By popular demand... ;-)
[Peter: reword]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc; Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is ugly, since Python does not have enum constructs, so by moving
the 'type' of the constant ('MODE' here) to the beginning, we get an
artificial 'namespace' for the constants.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Although unnecessary (we already have initialisation via the parser),
initialise the 'transitive' option, and document it at the same time.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add some comment as well, enhance help text.
[thanks to Samuel for the hints to make it even more pythonic]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Merge the redundant-dependencies elimination into the newly introduced
transitive-dependencies elimination.
This makes the code cleaner and much shorter, because:
- the ('all',pkg) redundant dependency is in fact a transitive
dependency, and we now have code to deal with that
- the (pkg,'toolchain') dependency is easy enough to deal with that
having a separate function for that is overkill
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
