configs/mangopi_mq1rdw1_defconfig: new defconfig
Add support for MangoPi MQ1RDW2: https://mangopi.org/mqr An Allwinner T113-S3(2xCortex-A7+128MB DDR3-1600 embedded) based SBC with: * USB-OTG Type-C socket * USB-HOST Type-C socket * 2x 18 pin GPIO headers * TF card slot * RTL8723DS WiFi module with ext. antenna connector * 40 pin RGB FPC connector * 6 pin CTP FPC connector * 24 pin DVP FPC connector * onboard mic * onboard audio amplifier * FEL,reset button Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit is contained in:
Giulio Benetti
Thomas Petazzoni
parent
cbe0f4de67
commit
fe8f95a61e
@ -1211,6 +1211,7 @@ N: Giulio Benetti <giulio.benetti@benettiengineering.com>
|
||||
F: board/bananapi/bananapi-m2-ultra/
|
||||
F: board/freescale/imx6ullevk/
|
||||
F: board/freescale/imxrt1050evk/
|
||||
F: board/mangopi/mq1rdw2/
|
||||
F: board/olimex/a*
|
||||
F: board/pine64/rockpro64
|
||||
F: configs/amarula_vyasa_rk3288_defconfig
|
||||
@ -1220,6 +1221,7 @@ F: configs/bananapi_m2_ultra_defconfig
|
||||
F: configs/freescale_imx6ullevk_defconfig
|
||||
F: configs/imx6ullevk_defconfig
|
||||
F: configs/imxrt1050-evk_defconfig
|
||||
F: configs/mangopi_mq1rdw2_defconfig
|
||||
F: configs/olimex_a*
|
||||
F: configs/rockpro64_defconfig
|
||||
F: package/at/
|
||||
|
||||
16
board/mangopi/mq1rdw2/genimage.cfg
Normal file
16
board/mangopi/mq1rdw2/genimage.cfg
Normal file
@ -0,0 +1,16 @@
|
||||
image sdcard.img {
|
||||
hdimage {
|
||||
}
|
||||
|
||||
partition u-boot {
|
||||
in-partition-table = "no"
|
||||
image = "u-boot-sunxi-with-spl.bin"
|
||||
offset = 8K
|
||||
size = 1016K # 1MB - 8KB
|
||||
}
|
||||
|
||||
partition rootfs {
|
||||
partition-type = 0x83
|
||||
image = "rootfs.ext4"
|
||||
}
|
||||
}
|
||||
46
board/mangopi/mq1rdw2/readme.txt
Normal file
46
board/mangopi/mq1rdw2/readme.txt
Normal file
@ -0,0 +1,46 @@
|
||||
MangoPi MQ1RDW2
|
||||
===============
|
||||
|
||||
MangoPi MQ1RDW2 is a tiny ARM Cortex-A7 based single board computer.
|
||||
It's built around Allwinner T113-S3 dual core 1GHz CPU with integrated
|
||||
128MB DDR3-1600 RAM.
|
||||
Board features:
|
||||
- USB-OTG Type-C socket
|
||||
- USB-HOST Type-C socket
|
||||
- 2x 18 pin GPIO headers
|
||||
- TF card slot
|
||||
- RTL8723DS WiFi module with ext. antenna connector
|
||||
- 40 pin RGB FPC connector
|
||||
- 6 pin CTP FPC connector
|
||||
- 24 pin DVP FPC connector
|
||||
- onboard mic
|
||||
- onboard audio amplifier
|
||||
- FEL,reset button
|
||||
|
||||
How to build
|
||||
============
|
||||
|
||||
$ make mangopi_mq1rdw2_defconfig
|
||||
$ make
|
||||
|
||||
Wifi
|
||||
==========
|
||||
|
||||
Edit board/mangopi/mq1rdw2/overlay/etc/wpa_supplicant.conf or
|
||||
/etc/wpa_supplicant.conf once connected to the board:
|
||||
|
||||
* Replace YOURSSID with your AP ssid
|
||||
* Replace YOURPASSWD with your AP password
|
||||
|
||||
How to write the SD card
|
||||
========================
|
||||
|
||||
Once the build process is finished you will have an image called "sdcard.img"
|
||||
in the output/images/ directory.
|
||||
|
||||
Copy the bootable "sdcard.img" onto an SD card with "dd":
|
||||
|
||||
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
|
||||
|
||||
Connect a TTL UART to the UART3 on P8 header (unpopulated), insert the microSD card and
|
||||
plug in a USB-C cable to the OTG or HOST connector to boot the system.
|
||||
@ -0,0 +1,4 @@
|
||||
label MANGOPI-MQ1RDW2
|
||||
kernel /boot/zImage
|
||||
devicetree /boot/sun8i-t113s-mangopi-mq-r-t113.dtb
|
||||
append console=ttyS3,115200 root=/dev/mmcblk0p1 rootwait panic=10 ${extra}
|
||||
@ -0,0 +1,6 @@
|
||||
auto lo
|
||||
iface lo inet loopback
|
||||
|
||||
auto wlan0
|
||||
iface wlan0 inet dhcp
|
||||
wpa-conf /etc/wpa_supplicant.conf
|
||||
@ -0,0 +1,8 @@
|
||||
ap_scan=1
|
||||
|
||||
network={
|
||||
ssid="YOURSSID"
|
||||
scan_ssid=1
|
||||
key_mgmt=WPA-PSK
|
||||
psk="YOURPASSWD"
|
||||
}
|
||||
40
configs/mangopi_mq1rdw2_defconfig
Normal file
40
configs/mangopi_mq1rdw2_defconfig
Normal file
@ -0,0 +1,40 @@
|
||||
BR2_arm=y
|
||||
BR2_cortex_a7=y
|
||||
BR2_ARM_FPU_VFPV4=y
|
||||
BR2_TARGET_GENERIC_HOSTNAME="mangopi-mq1rdw2"
|
||||
BR2_TARGET_GENERIC_ISSUE="Welcome to MangoPI MQ1RDW2"
|
||||
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
|
||||
BR2_TARGET_GENERIC_GETTY_PORT="ttyS3"
|
||||
BR2_SYSTEM_DHCP="eth0"
|
||||
BR2_ROOTFS_OVERLAY="board/mangopi/mq1rdw2/rootfs_overlay"
|
||||
BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
|
||||
BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/mangopi/mq1rdw2/genimage.cfg"
|
||||
BR2_LINUX_KERNEL=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.5"
|
||||
BR2_LINUX_KERNEL_DEFCONFIG="sunxi"
|
||||
BR2_LINUX_KERNEL_DTS_SUPPORT=y
|
||||
BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun8i-t113s-mangopi-mq-r-t113"
|
||||
BR2_LINUX_KERNEL_INSTALL_TARGET=y
|
||||
BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
|
||||
BR2_PACKAGE_RTL8723DS=y
|
||||
BR2_PACKAGE_WIRELESS_TOOLS=y
|
||||
BR2_PACKAGE_WPA_SUPPLICANT=y
|
||||
BR2_PACKAGE_WPA_SUPPLICANT_AUTOSCAN=y
|
||||
BR2_PACKAGE_WPA_SUPPLICANT_CLI=y
|
||||
BR2_PACKAGE_WPA_SUPPLICANT_WPA_CLIENT_SO=y
|
||||
BR2_PACKAGE_WPA_SUPPLICANT_PASSPHRASE=y
|
||||
BR2_TARGET_ROOTFS_EXT2=y
|
||||
BR2_TARGET_ROOTFS_EXT2_4=y
|
||||
# BR2_TARGET_ROOTFS_TAR is not set
|
||||
BR2_TARGET_UBOOT=y
|
||||
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
|
||||
BR2_TARGET_UBOOT_CUSTOM_VERSION=y
|
||||
BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2024.01-rc4"
|
||||
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="mangopi_mq_r"
|
||||
BR2_TARGET_UBOOT_NEEDS_DTC=y
|
||||
BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
|
||||
BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
|
||||
BR2_TARGET_UBOOT_SPL=y
|
||||
BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin"
|
||||
BR2_PACKAGE_HOST_GENIMAGE=y
|
||||
Loading…
Reference in New Issue
Block a user