diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
index 30c8ff920b..779565956f 100644
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -124,7 +124,6 @@ freescale_imx6sololiteevk_defconfig: *defconfig
 freescale_imx6sxsabresd_defconfig: *defconfig
 freescale_imx6ulevk_defconfig: *defconfig
 freescale_imx7dsabresd_defconfig: *defconfig
-freescale_mpc8315erdb_defconfig: *defconfig
 freescale_p1010rdb_pa_defconfig: *defconfig
 friendlyarm_nanopi_a64_defconfig: *defconfig
 friendlyarm_nanopi_neo2_defconfig: *defconfig
diff --git a/board/freescale/mpc8315erdb/linux-4.5.config b/board/freescale/mpc8315erdb/linux-4.5.config
deleted file mode 100644
index 8f56069309..0000000000
--- a/board/freescale/mpc8315erdb/linux-4.5.config
+++ /dev/null
@@ -1,70 +0,0 @@
-CONFIG_FSL_EMB_PERFMON=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_EMBEDDED=y
-CONFIG_MODULES=y
-# CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_PMAC is not set
-CONFIG_PPC_83xx=y
-CONFIG_MPC831x_RDB=y
-CONFIG_MCU_MPC8349EMITX=y
-CONFIG_PCI=y
-CONFIG_PCIEPORTBUS=y
-# CONFIG_PCIEASPM is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_FSL_ELBC=y
-CONFIG_SCSI_MQ_DEFAULT=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_ATA=y
-CONFIG_SATA_FSL=y
-CONFIG_NETDEVICES=y
-CONFIG_GIANFAR=y
-CONFIG_REALTEK_PHY=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MPC=y
-CONFIG_SPI=y
-CONFIG_SPI_FSL_SPI=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_MPC8XXX=y
-CONFIG_WATCHDOG=y
-CONFIG_8xxx_WDT=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_FSL=y
-CONFIG_USB_STORAGE=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_DS1307=y
-CONFIG_RTC_DRV_GENERIC=y
-CONFIG_DMADEVICES=y
-CONFIG_FSL_DMA=y
-CONFIG_ASYNC_TX_DMA=y
-CONFIG_EXT4_FS=y
-CONFIG_FANOTIFY=y
-CONFIG_VFAT_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_SQUASHFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_CRYPTO_DEV_TALITOS=y
diff --git a/board/freescale/mpc8315erdb/readme.txt b/board/freescale/mpc8315erdb/readme.txt
deleted file mode 100644
index b4c87b4d4a..0000000000
--- a/board/freescale/mpc8315erdb/readme.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-You'll need to program the files created by buildroot into the flash.
-The fast way is to tftp transfer the files via one of the network interfaces.
-
-Alternatively you can transfer the files via serial console with an Ymodem
-file transfer from your terminal program by using a "loady" command
-from the u-boot prompt instead of the "tftp ..." commands stated below.
-Beware that serial console file transfers are quite slow!
-
-1. Program the kernel to NAND flash
-
-    => tftp $loadaddr uImage
-    => nand erase 0x100000 0x1e0000
-    => nand write $loadaddr 0x100000 0x1e0000
-
-2. Program the DTB to NAND flash
-
-    => tftp $loadaddr mpc8315erdb.dtb
-    => nand erase 0x2e0000 0x20000
-    => nand write $loadaddr 0x2e0000 0x20000
-
-3. Program the root filesystem to NAND flash
-
-    => tftp $loadaddr rootfs.jffs2
-    => nand erase 0x400000 0x1c00000
-    => nand write $loadaddr 0x400000 $filesize
-
-4. Booting your new system
-
-    => setenv nandboot 'setenv bootargs root=/dev/mtdblock3 rootfstype=jffs2 console=$consoledev,$baudrate;nand read $fdtaddr 0x2e0000 0x20000;nand read $loadaddr 0x100000 0x1e0000;bootm $loadaddr - $fdtaddr'
-
-    If you want to set this boot option as default:
-
-    => setenv bootcmd 'run nandboot'
-    => saveenv
-
-    ...or for a single boot:
-
-    => run nandboot
-
-    You can login with user "root".
diff --git a/configs/freescale_mpc8315erdb_defconfig b/configs/freescale_mpc8315erdb_defconfig
deleted file mode 100644
index de7e561352..0000000000
--- a/configs/freescale_mpc8315erdb_defconfig
+++ /dev/null
@@ -1,28 +0,0 @@
-# Architecture
-BR2_powerpc=y
-BR2_powerpc_e300c3=y
-
-# Filesystem
-# BR2_TARGET_ROOTFS_TAR is not set
-BR2_TARGET_ROOTFS_JFFS2=y
-BR2_TARGET_ROOTFS_JFFS2_CUSTOM=y
-BR2_TARGET_ROOTFS_JFFS2_CUSTOM_PAGESIZE=0x200
-BR2_TARGET_ROOTFS_JFFS2_CUSTOM_EBSIZE=0x4000
-BR2_TARGET_ROOTFS_JFFS2_NOCLEANMARKER=y
-
-# Linux headers same as kernel, a 4.5 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_5=y
-
-# Kernel
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.5.3"
-BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/freescale/mpc8315erdb/linux-4.5.config"
-BR2_LINUX_KERNEL_UIMAGE=y
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="mpc8315erdb"
-
-# Serial port config
-BR2_TARGET_GENERIC_GETTY=y
-BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"